Creep-fatigue-oxidation interactions in a 9Cr-1Mo martensitic steel. Part II: Effect of compressive holding period on fatigue lifetime

International Journal of Fatigue

Volumn 30, Issue 4, 2008, Pages 663-676

  Fournier, B ^a,b   Sauzay, M ^b   Caes C ^a   Noblecourt, M ^a   Mottot, M ^a   Bougault, A ^a   Rabeau, V ^a   Pineau, A ^b  

^a SRMA   (France)

^b CENTRE DES MATÉRIAUX   (France)

Author keywords

9Cr; Compressive holding periods; Crack initiation; Creep; Fatigue; High temperature; Martensitic steel; Oxidation; Oxide cracking

Indexed keywords

CHROMIUM COMPOUNDS; CRACK INITIATION; CREEP; FATIGUE OF MATERIALS; FINITE ELEMENT METHOD; OXIDATION; STEEL METALLOGRAPHY;

COMPRESSIVE HOLDING PERIODS; CREEP FATIGUE OXIDATION INTERACTIONS; CYCLIC TESTS; MARTENSITIC STEEL; OXIDE CRACKING;

MARTENSITE;

EID: 38149008047     PISSN: 01421123     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijfatigue.2007.05.008     Document Type: Article

References (88)

1. Greeff A.P., Louw C.W., and Swart H.C. The oxidation of industrial FeCrMo steel. Corros Sci 42 (2000) 1725-1740
2. Khanna A.S., Rodriguez P., and Gnanamoorthy J.B. Oxidation kinetics, breakaway oxidation, and inversion phenomenon in 9Cr-1Mo steels. Oxid Met 26 (1986)
3. Ostwald C., and Grabke H.J. Initial oxidation and chromium diffusion. I. Effects of surface working on 9-20% Cr steels. Corros Sci 46 (2004) 1113-1127
4. Stobbs W.M., Newcomb S.B., and Metcalfe E. A microstructural study of the oxidation of Fe-Ni-Cr alloys. II 'Non-protective' oxide growth. Philos Tr R Soc S A319 (1986) 219-247
5. Martinelli L. MTcanismes de corrosion de l'acier T91 par l'eutectique Pb-Bi utilisT comme matTriau de spallation. PhD thesis, UniversitT de Paris VI, 2005.
6. Zurek J., Wessel E., Niewolak L., Schmitz F., Kern T.U., Singheiser L., et al. Anomalous temperature dependance of oxidation kinetics during steam oxidation of ferritic steels in the temperature range 550-650 °C. Science 46 (2004) 2301-2317
7. 18O. Oxid Met 5 (1972)
8. Crouch I.G., and Scully J.C. Selective oxidation of Fe-Cr alloys. Oxid Met 15 (1981)
9. Tokei Z., Viefhaus H., and Grabke H.J. Initial stages of oxidation of a 9CrMoV-steel: role of segregation and martensite laths. Appl Surf Sci 165 (2000) 23-33
10. Lloyd G.O., Saunders S.R., Kent B., and Fursey A. Breakaway oxydation of Fe-10%Cr and Fe-20%Cr at temperatures up to 600 °C. Appl Surf Sci 17 (1977) 269-299
11. Fournier B, Sauzay M, Caës C, Noblecourt M, Bougault A, Rabeau V, et al. Creep-fatigue-oxidation Interactions in a 9Cr-1Mo martensitic steel. Part I: effect of tensile holding period on the fatigue lifetime. Int J Fatigue 2007; in press. doi:10.1016/j.ijfatigue.2007.05.007.
12. Kschinka B.A., and Stubbins J.F. Creep-fatigue-environment interaction in a bainitic 2.25 wt.%Cr-1 wt.%Mo steel forging. Mater Sci Eng A110 (1989) 89-102
13. Hecht RL. Mechanisms operating during high-temperature fatigue with hold periods in two chromium ferritic steels. PhD thesis, Northwestern University; 1992.
14. Mannan S.L., and Valsan M. High-temperature low cycle fatigue, creep-fatigue and thermomechanical fatigue of steels and their welds. Int J Mech Sci 48 (2006) 160-175
15. Challenger K.D., Miller A.K., and Brinkman C.R. An explanation for the effects of hold periods on the elevated temperature fatigue behavior of 2 1/4 Cr-1Mo steel. J Eng Mater Technol 103 (1981) 7-14
16. Aoto K., Komine R., Ueno F., Kawasaki H., and Wada Y. Creep-fatigue evaluation of normalized and tempered modified 9Cr-1Mo. Nuclear Eng Design 153 (1994) 97-110
17. Sugiura T., Ishikawa A., Nakamura T., and Asada Y. Formulation of air environmental effect on creep-fatigue interaction. Nuclear Eng Design 153 (1994) 87-95
18. Taguchi K, Ueta M, Douzaki K, Sukekawa M, Koto H., Asada Y. Creep-fatigue life prediction for modified 9Cr-1Mo steel. High temperature service and time-dependent failure, ASME, PVP conference; 1993.
19. Hecht R.A., and Weertman J.R. The effect of environment on high-temperature hold time fatigue behaviour of annealed 2.25 pct Cr 1 pct Mo steel. Metall Mater Trans 29 A (1998) 2137-2145
20. Kim S., and Weertman J.R. Investigation of microstructural changes in a ferritic steel caused by high temperature fatigue. Metall Trans A 19A (1988) 999-1007
21. Hecht R.L., and Weertman J.R. Periodic oxide cracking on Fe2.25Cr1Mo produced by high temperature fatigue tests with a compression hold. Metall Trans 24 (1993) 327-333
22. Yaguchi M., Okamoto Y., Nakamura T., and Asada Y. Creep-fatigue interaction of modified 9Cr-1Mo steel in a very high vacuum environment and experimental analysis of overstress. JSME Int J 38 (1995) 220-225
23. Fournier B, Sauzay M, Mottot M, Rabeau V, Bougault A, and Pineau A. Fatigue crack initiation and propagation at high temperature in a softening martensitic steel. Proceedings of ECF16, Alexandroupolis, Greece; 2006.
24. RCC-MR. Design and construction rules for mechanical components; 1993.
25. ASME. Case N-47-29 Class 1 components in elevated temperature service, Section III, Division I. Cases of ASME Boiler and Pressure Vessel Code; 1990.
26. Cabrillat M.T., Allais L., Mottot M., Riou B., and Escaravage C. Creep fatigue behavior and damage assessment for Mod 9C-1Mo steel. Proceedings of PVP2006-ICPVT-11 (2006), Vancouver, Canada
27. Li Y., and Yang C. Approximate analysis of interaction of closely spaced cracks. J Mech Mater Struct 1 (2006) 147-162
28. Kachanov M. On the problems of crack interactions and crack coalescence. Int J Fracture 120 (2003) 537-543
29. Schütze M. Protective oxide scales and their breakdown (1997), Institute of Corrosion and Wiley, Chichester (UK)
30. Freund L.B., and Suresh S. Thin film materials (2003), Cambridge University Press, Cambridge (UK)
31. Schütze M. Modelling oxide scale fracture. Mater High Temperat 22 (2005) 147-154
32. Huntz A.M., Calvarin Amiri G., Evans H.E., and Cailletaud G. Comparison of oxidation growth stresses in NiO film experimentally determined by deflection and calculated using creep analysis or finite element modeling. Oxid Met 57 (2002) 499-521
33. Nishimura N., Komai N., Hirayama Y., and Masuyama F. Japanese experience with steam oxidation of advanced heat-resistant steel tubes in power boilers. Mater High Temperat 22 (2005) 3-10
34. Evans H.E. Spallation models and their relevance to steam-grown oxides. Mater High Temperat 22 (2005) 155-166
35. Osgerby S., Berriche-Bouhanek K., and Evans H.E. Tensile cracking of a chromia layer on a stainless steel during thermal cycling with hold periods. Mater Sci Eng A 412 (2005) 182-190
36. Osgerby S. Oxide scale damage and spallation in P92 martensitic steel. Microscopy Oxidation (2000) 307-310
37. Schütze M. Stress controlled mechanisms in the oxidation of metallic alloys. J Corros Sci Eng 6 (2003) H067
38. 2O. Mater High Temperat 22 (2005) 113-120
39. Galerie A., Henry S., Wouters Y., Mermoux M., Petit J.-P., and Antoni L. Mechanisms of chromia scale failure during the course of 15-18Cr ferritic stainless steel oxidation in water vapour. Mater High Temperat 22 (2005) 105-112
40. Skelton R.P., and Bucklow J.I. Cyclic oxidation and crack growth during high strain fatigue of low alloy steel. Metal Sci (1978)
41. Schütze M. Deformation and cracking behaviour of protective oxide scales on heat-resistant steels under tensile strain. Oxid Met 24 (1985) 199-232
42. Schütze M. Mechanical properties of oxide scales. Oxid Met 44 (1995)
43. Schütze M. Stresses and decohesion of oxide scales. Mater Sci Technol 4 (1988) 407-414
44. Schütze M. Fundamentals of high temperature corrosion - corrosion and environmental degradation. Materials science and technology series (2000), Wiley-VCH, New York
45. Schütze M., Ito S., Przybilla W., Echsler H., and Bruns C. Test methods and data on the mechanical properties of protective oxide scales. Mater High Temperat 18 (2001) 39-50
46. Osgerby S., and McCartney L.N. Steam oxidation of 9-12cr martensitic steels: characterisation and modelling the spalling of oxide scale. Mater Adv Power Eng (2002) 1613-1620
47. Grosskreutz J.C. Mechanical properties of metal oxide films. J Electrochem Soc 116 (1969) 1232-1237
48. Robertson J., and Manning M.I. Limits to adherence of oxide scales. Mater Sci Technol 6 (1990) 81-90
49. Christl W., Rahmel A., and Schütze M. Behavior of oxide scales on 2.25Cr-1Mo steel during thermal cycling. I. Scales formed in oxygen and air. Oxid Met 31 (1989) 1-33
50. Evans H.E., and Lobb R.C. Conditions for the initiation of oxide-scale cracking and spallation. Corros Sci 24 (1984) 209-222
51. Hu M.S., Thouless M.D., and Evans A.G. The decohesion of thin films from brittle substrates. Acta Metall 36 (1988) 1301-1307
52. Evans H.E., and Taylor M.P. Creep relaxation and spallation of the oxide layers. Surf Coat Technol 94-95 (1997) 27-33
53. Hu M.S., and Evans A.G. The cracking and decohesion of thin films on ductile substrates. Acta Metall 37 (1989) 917-925
54. Hou P.Y., and Saunders S.R.J. A survey of test methods for scale adhesion measurement. Mater High Temperat 22 (2005) 121-129
55. Leguillon D. Strength or toughness? A criterion for crack onset at a notch. Eur J Mech A/Solids 21 (2002) 61-72
56. McCartney L.N. Modelling scale failure in tension (fracture and spallation). Mater High Temperat 22 (2005) 167-177
57. Evans A.G., Crumley G.B., and Demaray R.E. On the mechanical behaviour of brittle coatings and layers. Oxid Met 20 (1983) 193-216
58. Wells CH, Follansbee PS, and Dils RR. Mechanisms of dynamic degradation of surface oxides. In: Proceedings of symposium of the TMS-AIME meeting, Detroit, MI; 1975.
59. Timoshenko S., and Gere J. Theory of elastic stability. Engineering societies monographs (1961), McGraw-Hill Book Company, New York (USA)
60. Taylor M.R., Calvert J.M., Lees D.G., and Meadowcroft D.B. The mechanism of corrosion of Fe-9%Cr alloys in carbon dioxide. Oxid Met 14 (1980)
61. Rudge A. Steam oxidation and spallation in UK advanced gas-cooled reactors. Mater High Temperat 22 (2005) 11-13
62. Otsuka N. Fracture behavior of steam-grown oxide scales formed on 2-12%Cr steels. Mater High Temperat 22 (2005) 131-138
63. Barbehön J., Rahmel A., and Schütze M. Behavior of the scale on a 9.5Cr steel under cyclic deformation of the base metal. Oxid Met 30 (1988) 85-94
64. Pillai S.R., Barasi N.S., and Khatak H.S. Behavior of oxide scale on 9Cr-1Mo steel under varying external stresses. Oxid Met 53 (2000) 193-220
65. Gaillet L., Benmedakhne S., Laksimi A., and Moulin G. Nickel high temperature oxydation under creep loading using acoustic emission monitoring. J Mater Sci 38 (2003) 1479-1484
66. Hsueh C.-H. Some applications of two-dimensional stress transfer analyses. Acta Mater 46 (1998) 2131-2138
67. Hsueh C.-H., and Becher P.F. Interfacial shear debonding problems in fiber-reinforced ceramic composites. Acta Mater 46 (1998) 3237-3245
68. Lacroix C., Leguillon D., and Martin E. The influence of an interphase on the deflection of a matrix crack in a ceramic-matrix composite. Compos Sci Technol 62 (2002) 519-523
69. François D., Pineau A., and Zaoui A. Mechanical behaviour of materials II (1998), Kluwer Academic Pub
70. Sauzay M., Caës C., Mottot M., and Robertson Ch. Une étude numérique du rôle de la couche d'oxydes dans l'amorçtage de fissures de fatigue à moyenne température. J Physique IV 106 (2003) 99-108
71. Polak J., Petrenec M., and Man J. Dislocation structure and surface relief in fatigued metals. Mater Sci Eng A400-401 (2005) 405-408
72. Man J., Petrenec M., Obrtlik K., and Polak J. AFM and TEM study of cyclic slip localization in fatigued ferritic X10CrAl24 stainless steel. Acta Mater 52 (2004) 5551-5561
73. Suresh S. Fatigue of materials (1998), Cambridge University Press, UK
74. Déprés C., Robertson C., and Fivel M. Crack initiation in fatigue: experiments and three-dimensional dislocation simulations. Mater Sci Eng A 387-389 (2004) 288-291
75. British Energy. R5, Assessment procedure for the high temperature response of structures; 2003.
76. Aktaa J., and Lerch M. Near-threshold fatigue crack behaviour in EUROFER 97 at different temperatures. J Nucl Mater 333 (2006) 101-108
77. Nakamura H., Murali K., Minakawa K., and McEvily A.J. Fatigue crack growth in ferritic steels as influenced by elevated temperature and environment. Microstruct Mech Behaviour Mater 1 (1985) 43-57
78. Ebi G., and McEvily A.J. Effect of processing on the high temperature low cycle fatigue properties of modified 9Cr-1Mo ferritic steel. Fatigue Eng Mater Struct 7 (1994) 299-314
79. Reytier M. Fatigue crack growth of large cracked plates of martensitic P91 steel at 550 °C. OMMI 3 (2004)
80. Alexandre F., Deyber S., and Pineau A. Modelling of the optimum grain size on the low cycle fatigue life of a Ni based superalloy in the presence of two possible crack initiation sites. Scrip Mater 50 (2004) 25-30
81. Salapete R, Barlas B, Massinon D, Morin G, Cailletaud G., Pineau A. Modelling of fatigue damage in aluminium cylinder head. In: Proceedings of the ECF16 conference, fracture of nano and engineering materials and structures, Greece, Alexandroupolis; 2006.
82. Tanaka K., and Mura T. J Appl Mech 48 (1981) 97-103
83. Mura T. A theory of fatigue crack initiation. Mater Sci Eng A 176 (1994) 61-70
84. Tomkins B. Philos Mag 18 (1968) 1041-1066
85. Gieseke B.G., Brinkman C.R., and Maziasz P.J. The influence of thermal aging on the microstructure and fatigue properties of modified 9Cr-1Mo steel. Microstructures and mechanical properties of aging material (1993), TMS The Minerals, Metals & Materials Society
86. Ikeda Y., and Nii K. Microcrack generation and its healing in the oxide scale formed on Fe-Cr alloys. Oxid Met 12 (1978) 487-502
87. http://www-cast3m.cea.fr/cast3m/index.jsp.
88. Friedel J. Les dislocations. Monographies de chimie physique (1956), Gauthier-Villars, Paris