Preparation of metallo-dielectric photonic crystals by multi-photon direct laser writing

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 6901, Issue , 2008, Pages

  Kuebler, Stephen M ^a   Tal, Amir ^a   Chen, Yun Sheng ^a  

^a UNIVERSITY OF CENTRAL FLORIDA   (United States)

Author keywords

Direct laser writing; Infrared micro optical systems; Metallo dielectrics; Photonic crystals; Two photon microfabrication

Indexed keywords

ENERGY GAP; HEAT RADIATION; MICROFABRICATION; OPTICAL SYSTEMS; PHOTONS; REFRACTIVE INDEX;

INFRARED MICRO OPTICAL SYSTEMS; METALLO DIELECTRICS; NEGATIVE REFRACTIVE INDEX; THERMAL EMISSION; TWO PHOTON MICROFABRICATION;

PHOTONIC CRYSTALS;

EID: 43249091830     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.760826     Document Type: Conference Paper

References (46)

1. M. M. Sigalas, C. T. Chan, K. M. Ho, and C. M. Soukoulis, "Metallic photonic band-gap materials," Phys. Rev. B 52, pp. 11744-11751, 1995.
2. S. Fan, P. R. Villeneuve, and J. D. Joannopoulos, "Large omnidirectional band gaps in metallodielectric photonic crystals," Phys. Rev. B 54, pp. 11245-11251, 1996.
3. J. -M. Lourtioz and A. de Lustrac, "Metallic photonic crystals," C. R. Phys. 3, pp. 79-88, 2002.
4. J. G. Fleming, S. Y. Lin, I. El-Kady, R. Biswas, and K. M. Ho, "All-metallic three-dimensional photonic crystals with a large infrared bandgap," Nature 417, pp. 52-55, 2002.
5. S. Y. Lin, D. -X. Ye, T. -M. Lu, J. Bur, Y. S. Kim, and K. M. Ho, "Achieving a photonic band edge near visible wavelengths by metallic coatings," J. Appl. Phys. 99, pp. 083104-1-083104-4, 2006.
6. J. B. Pendry, A. J. Holden, W. J. Stewart, and I. Youngs, "Extremely low frequency plasmons in metallic mesostructures," Phys. Rev. Lett. 76, pp. 4773-4776, 1996.
7. D. F. Sievenpiper, E. Yablonovitch, J. N. Winn, S. Fan, P. R. Villeneuve, and J. D. Joannopoulos, "3D metallodielectric photonic crystals with strong capacitive coupling between metallic islands," Phys. Rev. Lett. 80, pp. 2829-2832, 1998.
8. H. Benisty, V. Berger, J. Gerard, D. Maytre, and A. Tchelnokov, Photonic Crystals: Toward Nanoscale Photonic Devices, Springer, Berlin, 2005.
9. S. Y. Lin, S. Moreno, and G. R. Fleming, "Three-dimensional photonic-crystal emitter for thermal photovoltaic power generation," Appl. Phys. Lett. 83, pp. 380-382, 2003.
10. J. -H. Lee, C. -H. Kim, Y. -S. Kim, K. -M. Ho, K. Constant, and C. H. Oh, "Three-dimensional metallic photonic crystals fabricated by soft lithography for midinfrared applications," Appl. Phys. Lett. 88, p. 181112, 2006.
11. J. -H. Lee, Y. -S. Kim, K. Constant, and K. -M. Ho, "Woodpile metallic photonic crystals fabricated by using soft lithography for tailored thermal emission," Adv. Mater. 19, pp. 791-794, 2007.
12. R. A. Shelby, D. R. Smith, and S. Schulz, "Experimental verification of a negative index of refraction," Science 292, pp. 77-79, 2001.
13. Y. Wang, M. Ibisate, A. -Y. Li, and Y. Xia, "Metallodielectric photonic crystals assembled from monodisperse spherical colloids of bismuth and lead," Adv. Mater. 18, pp. 471-476, 2006.
14. M. E. Kozlov, N. S. Murthy, I. Udod, I. I. Khayrullin, R. H. Baughman, and A. A. Zakhidov, "Preparation, structural, and calorimetric characterization of bicomponent metallic photonic crystals," Appl. Phys. A 86, pp. 421-425, 2007.
15. K. Kaneko, H. -B. Sun, X. -M. Duan, and S. Kawata, "Submicron diamond-lattice photonic crystals produced by two-photon laser nanofabrication," Appl. Phys. Lett. 83, pp. 2091-2093, 2003.
16. J. Serbin, A. Ovsianikov, and B. Chichkov, "Fabrication of woodpile structures by two-photon polymerization and investigation of their optical properties," Opt. Express 12, pp. 5221-5227, 2004.
17. M. Deubel, G. Freymann, M. Wegener, S. Pereira, K. Busch, and C. M. Soukoulis, "Direct laser writing of three-dimensional photonic-crystal templates for telecommunications," Nature Mater. 3, pp. 444-447, 2004.
18. V. Mizeikis, K. K. Seet, S. Juodkazis, and H. Misawa, "Three-dimensional woodpile photonic crystal templates for the infrared spectral range," Opt. Lett. 29, pp. 2061-2063, 2004.
19. S. M. Kuebler and M. Rumi, "Nonlinear optics - applications: three-dimensional microfabrication", In Encyclopedia of Modern Optics, pp. 189-206. R. D. Guenther, D. G. Steel, and L. Bayvel, eds. Elsevier, Oxford, 2004.
20. D. R. Smith, J. B. Pendry, and M. C. K. Wiltshire, "Metamaterials and negative refractive index," Science 305, pp. 788-792, 2004.
21. F. Formanek, N. Takeyasu, T. Tanaka, K. Chiyoda, A. Ishikawa, and S. Kawata, "Three-dimensional fabrication of metallic nanostructure over large areas by two-photon polymerization," Opt. Express 14, pp. 800-809, 2006.
22. K. L. Mittal, ed. Metallized Plastics 5 & 6: Fundamental and Applied Aspects, VSP, Utrecht, The Netherlands, 1998.
23. Y. -S. Chen, A. Tal, D. B. Torrance, and S. M. Kuebler, "Fabrication and characterization of three-dimensional silver-coated polymeric microstructures," Adv. Funct. Mater. 16, pp. 1739-1744, 2006.
24. R. Allen, R. Nielson, D. D. Wise, and J. B. Shear, "Catalytic three-dimensional protein architectures," Anal. Chem. 77, pp. 5089-5095, 2005.
25. F. Formanek, N. Takeyasu, T. Tanaka, K. Chiyoda, A. Ishikawa, and S. Kawata, "Selective electroless plating to fabricate complex three-dimensional metallic micro/nanostructures," Appl. Phys. Lett. 88, pp. 083110-1 - 083110-3, 2006.
26. R. A. Farrer, C. N. LaFratta, L. Li, J. Praino, M. J. Naughton, B. E. A. Saleh, M. C Teich, and J. T. Fourkas, "Selective functionalization of 3-D polymer microstructures," J. Am. Chem. Soc. 128, pp. 1796-1797, 2006.
27. G. Odian, Principles of Polymerization, 4th edn., Wiley, New York, 2004.
28. L. J. Guerin, M. Bossel, M. Demierre, S. Calmes, and P. Renaud. "Simple and low cost fabrication of embedded microchannels by using a new thick-film photoplastic." Conf.: Proceedings of the International Solid State Sensors and Actuators Conference (Transducers '97), Chicago, p. 1419-1422, Vol. 2.publ. (1997).
29. K. Y. Lee, N. LaBianca, S. A. Rishton, S. Zolgharnain, J. D. Gelorme, J. Shaw, and T. H. -P. Chang, "Micromachining applications of a high resolution ultrathick photoresist," J. Vac. Sei. Technol. B 13, pp. 3012-3016, 1995.
30. H. Lorenz, M. Despont, N. Fahrni, N. LaBianca, P. Renaud, and P. Vettiger, "SU-8: a low-cost negative resist for MEMS," J. Micromech. Microeng. 7, pp. 121-124, 1997.
31. A. Llobera, V. Seidemann, J. A. Plaza, V. J. Cadarso, and S. Büttgenbach, "SU-8 optical accelerometers," J. Microelectromech. Sys. 16, pp. 111-121, 2007.
32. C. K. Chung and Y. Z. Hong, "Surface modification of SU8 photoresist for shrinkage improvement in a monolithic MEMS microstructure," J. Micromech. Microeng. 17, pp. 207-212, 2007.
33. S. Rajaraman, S. -O. Choi, R. H. Shafer, J. D. Ross, J. Vukasinovic, Y. Choi, S. P. DeWeerth, A. Glezer, and M. G. Allen, "Microfabrication technologies for a coupled three-dimensional microelectrode, microfluidic array," J. Micromech. Microeng. 17, pp. 163-171, 2007.
34. L. M. Jiang, Z. F. Liu, J. Tang, L. Zhang, Shi. K., Z. Q. Tian, P. K. Liu, L. N. Sun, and Z. W. Tian, "Three-dimensional micro-fabrication on copper and nickel," J. Electroanal. Chem. 581, pp. 153-, 2005.
35. S. K. Smoukov, K. J. M. Bishop, C. J. Campbell, and B. A. Grzybowski, "Free-standing three-dimensional copper foils prepared by electroless deposition on micropatterned gels," Adv. Mater. 17, pp. 751-755, 2005.
36. Y. -K. Yoon, J. -H. Park, and M. G. Allen, "Multidirectional UV lithography for complex 3-D MEMS structures," J. Microelectromech. Sys. 15, pp. 1121-1130, 2006.
37. W. Zhou, S. M. Kuebler, K. L. Braun, T. Yu, J. K. Cammack, C. K. Ober, J. W. Perry, and S. R. Marder, "An efficient two-photon-generated photoacid applied to positive-tone 3D microfabrication," Science 296, pp. 1106-1109, 2002.
38. Y. -S. Chen, A. Tal, and S. M. Kuebler, "Route to three-dimensional metallized micro-structures using cross-linkable epoxide SU-8," Chem. Mater. 19, pp. 3858-3860, 2007.
39. T. Holstein, "Optical and infrared volume absorptivity of metals," Phys. Rev. 96, pp. 535-536, 1954.
40. A. M. Fox, Optical Properties of Solids, Oxford Univ. Press, Oxford, 2002.
41. S. Roberts, "Optical properties of copper," Phys. Rev. 118, pp. 1509-1518, 1960.
42. K. M. Ho, C. T. Chan, C. M. Soukoulis, R. Biswas, and M. Sigalas, "Photonic band gaps in three dimensions: new layer-by-layer periodic structures," Sol. State Commun. 89, pp. 413-416, 1994.
43. R. L. Cervantes, L. E. Murr, and R. M. Arrowood, "Copper nucleation and growth during the corrosion of aluminum alloy 2524 in sodium chloride solutions," J. Mater. Sci. 36, pp. 4079-4088, 2001.
44. S. G. Johnson and J. D. Joannopoulos, Photonic Crystals: The Road from Theory to Practice, Kluwer, Boston, 2002.
45. C. M. Soukoulis, "The history and a review of the modelling and fabrication of photonic crystals," Nanotechnology 13, pp. 420-423, 2002.
46. K. K. Seet, V. Mizeikis, S. Matsuo, S. Juodkazis, and H. Misawa, "Three-dimensional spiral-architecture photonic crystals obtained by direct laser writing," Adv. Mater. 17, pp. 541-545, 2005.