Thermal management methods for compact high power LED arrays

Proceedings of SPIE - The International Society for Optical Engineering

Volumn 6669, Issue , 2007, Pages

  Christensen, Adam ^a   Ha, Minseok ^a   Graham, Samuel ^a  

^a GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

Author keywords

Active cooling; LEDs; Solid state lighting; Thermal management; Thermal stresses

Indexed keywords

COOLING SYSTEMS; FINITE ELEMENT METHOD; HEAT RESISTANCE; NUMERICAL METHODS; TEMPERATURE CONTROL;

PASSIVE COOLING METHODS; SOLID STATE LIGHTING;

LIGHT EMITTING DIODES;

EID: 42149169615     PISSN: 0277786X     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1117/12.741934     Document Type: Conference Paper

References (22)

1. Narendran, N. and Y. Gu, Life of LED-based white light sources. IEEE/OSA Journal of Display Technology, 2005. 1(1): p. 167-170.
2. Narendran, N., Y. Gu, J.P. Freyssinier, H. Yu, and L. Deng, Solid-state lighting: Failure analysis of white LEDs. Journal of Crystal Growth, 2004. 268: p. 449-456.
3. Narendran, N., Y. Gu, and R. Hosseinzadeh. Estimating junction temperature of high-flux white LEDs, in Proceedings of SPIE - The International Society for Optical Engineering. 2004. San Jose, CA, United States: The International Society for Optical Engineering, Bellingham, United States.
4. Arik, M., C. Becker, S. Weaver, and J. Petroski. Thermal Management of LEDs: Package to System, in Proceedings of SPIE - The International Society for Optical Engineering. 2004. San Diego, CA, United States: International Society for Optical Engineering, Bellingham, WA 98227-0010, United States.
5. Petroski, J. Spacing of high-brightness LEDs on metal substrate PCB's for proper thermal performance, in Thermomechanical Phenomena in Electronic Systems -Proceedings of the Intersociety Conference. 2004. Las Vegas, NV, United States: Institute of Electrical and Electronics Engineers Inc., Piscataway, United States.
6. Xu, J.J., Y.-F. Wu, S. Keller, G. Parish, S. Heikman, B.J. Thibeault, U.K. Mishra, and R.A. York, 1- 8-GHz GaN-based power amplifier using flip-chip bonding. IEEE Microwave and Guided Wave Letters, 1999. 9(7): p. 277.
7. Patel, C.D. Backside cooling solution for high power flip chip multi-chip modules, in Proceedings - Electronic Components and Technology Conference. 1994. Washington, DC, USA: Publ by IEEE, Piscataway, NJ, USA.
8. Lee, S.L., Z.H. Yang, and Y. Hsyua, Cooling of a heated surface by mist flow. Journal of Heat Transfer, Transactions ASME, 1994. 116(1): p. 167.
9. Murthy, J.Y., C.H. Amon, K. Gabriel, P. Kumta, S.C. Yao, D. Boyalakuntla, C.C. Hsieh, A. Jain, S.V.J. Narumanchi, K. Rebello, and C.F. Wu. MEMS-based thermal management of electronics using spray impingement, in Advances in Electronic Packaging. 2001. Kauai, Hi, United States: American Society of Mechanical Engineers, New York, NY 10016-5990, United States.
10. Ma, Z., X. Wang, D. Zhu, and S. Liu. Thermal analysis and modeling of LED arrays integrated with an innovative liquid-cooling module, in 6th International Conference on Electronics Packaging Technology. 2005. Dameisha, Shenzhen, China: Institute of Electrical and Electronics Engineers Computer Society, Piscataway, NJ 08855-1331, United States.
11. Shin, M.W. Thermal design of high-power LED package and system, in Proceedings of SPIE - The International Society for Optical Engineering. 2006. Gwangju, South Korea: International Society for Optical Engineering, Bellingham WA, WA 98227-0010, United States.
12. Kuckmann, O. High power LED arrays special requirements on packaging technology, in Proceedings of SPIE - The International Society for Optical Engineering. 2006. San Jose, CA, United States: International Society for Optical Engineering, Bellingham WA, WA 98227-0010, United States.
13. Liu, S., T. Lin, X. Luo, M. Chen, and X. Jiang. A microjet array cooling system for thermal management of active radars and high-brightness LEDs. 2006. San Diego, CA, United States: Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ 08855-1331, United States.
14. Lumileds, Technical Datasheet DS51 Power Light Source Lexon K2 Emitter, in www.lumileds.com. 2006.
15. Yovanovich, M.M., Y.S. Muzychka, and J.R. Culham, Spreading resistance of isoflux rectangles and strips on compound flux channels. Journal of Thermophysics and Heat Transfer, 1999. 13(4): p. 495-500.
16. Zuo, Z.J., M.T. North, and K.L. Wert, High heat flux heat pipe mechanism for cooling of electronics. IEEE Transactions on Components and Packaging Technologies, 2001. 24(2): p. 220-225.
17. Wang, Y. and G.P. Peterson, Investigation of a novel flat heat pipe. Journal of Heat Transfer, 2005. 127(2): p. 165-170.
18. Avenas, Y., C. Gillot, A. Bricard, and C. Schaeffer. On the use of flat heat pipes as thermal spreaders in power electronics cooling, in IEEE Annual Power Electronics Specialists Conference. 2002. Cairns, Australia: Institute of Electrical and Electronics Engineers Inc.
19. Cao, Y., M. Gao, J.E. Beam, and B. Donovan, Experiments and analyses of flat miniature heat pipes. Journal of Thermophysics and Heat Transfer, 1997. 11(2): p. 158-164.
20. Boukhanouf, R., A. Haddad, M.T. North, and C. Buffone, Experimental investigation of a flat plate heat pipe performance using IR thermal imaging camera. Applied Thermal Engineering, 2006. 26(17-18): p. 2148-2156.
21. Schulz-Harder, J., J.B. Dezord, C Schaeffer, Y. Avenas, O. Puig, A. Rogg, K. Exel, and A. Utz-Kistner. DBC (Direct Bond Copper) substrate with integrated flat heat pipe, in Annual IEEE Semiconductor Thermal Measurement and Management Symposium. 2006. Dallas, TX, United States: Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ 08855-1331, United States.
22. Carbajal, G., C.B. Sobhan, G.P. Peterson, D.T. Queheillalt, and H.N.G. Wadley, Thermal response of a flat heat pipe sandwich structure to a localized heat flux. International Journal of Heat and Mass Transfer, 2006. 49(21-22): p. 4070-4081.