Using computational fluid dynamics to characterize and improve bioreactor performance

Biotechnology and Applied Biochemistry

Volumn 49, Issue 3-4, 2008, Pages 225-238

  Kelly, William J ^a  

^a Villanova University   (United States)

Author keywords

Bioreactor; Computational fluid dynamics (CFD); Gas liquid mixing; Mass transfer; Multi phase; Shear

Indexed keywords

COMPUTATIONAL FLUID DYNAMICS; FERMENTATION; HYDRODYNAMICS; MASS TRANSFER;

GAS LIQUID MIXING; MULTI PHASE;

BIOREACTORS;

BIOPROCESS; BIOREACTOR; CHEMICAL ENVIRONMENT; COMPUTATIONAL FLUID DYNAMICS; HYDRODYNAMICS; NONHUMAN; REVIEW; ANIMAL; ARTICLE; BIOLOGICAL MODEL; CELL FUNCTION; COMPUTER AIDED DESIGN; COMPUTER SIMULATION; CULTURE TECHNIQUE; EQUIPMENT; EQUIPMENT DESIGN; FLOW KINETICS; INSTRUMENTATION; METHODOLOGY;

ANIMALIA;

ANIMALS; BIOREACTORS; CELL CULTURE TECHNIQUES; CELL PHYSIOLOGY; COMPUTER SIMULATION; COMPUTER-AIDED DESIGN; EQUIPMENT DESIGN; EQUIPMENT FAILURE ANALYSIS; MODELS, BIOLOGICAL; RHEOLOGY;

EID: 41649098887     PISSN: 08854513     EISSN: None     Source Type: Journal    
DOI: 10.1042/BA20070177     Document Type: Review

References (72)

1. Maiorella, B. and Harano, D. (1991) Biotechnol. Bioeng. 37, 121-126
2. Thomas, C. R. (1993) Process Solid-liquid Suspensions, pp. 158-191, Butterworth-Heinemann, Oxford and Boston
3. Ma, N. and Chalmers, J. (2002) Biotechnol. Bioeng. 80, 428-437
4. McQueen, A. and Bailey, J. (1989) Biotechol. Lett. 11, 531-536
5. Gregoriades, N. and Chalmers, J. (1999) Biotechnol. Bioeng. 69, 171-182
6. Vickroy, B., Lorenz, K. and Kelly, W. (2007) Biotechnol. Prog. 23, 194-199
7. Garcia-Briones, M. and Chalmers, J. (1994) Chem. Eng. Sci. 49, 2301-2320
8. Christi, Y. (2000) Trends Biotechnol. 18, 420-432
9. Sahu, A., Kumar, P., Patwardhan, A. and Joshi, J. (1999) Chem. Eng. Sci. 54, 2285-2293
10. Miller, J., Rogowski, M. and Kelly, W. (2002) Biotechnol. Prog. 18, 1060-1067
11. Mostafa, S. S. and Gu, X. (2003) Biotechnol. Prog. 19, 45-51
12. Kimura, R. and Miller, W. (1996) Biotechnol. Bioeng. 52, 152-160
13. Sokolichin, A. and Eigenberger, G. (1999) Chem. Eng. Sci. 54, 2273-2284
14. Lopez de Bertodano, M., Lahey, T. and Jones, O. (1994) Trans. SME 116-128
15. Joshi, J. B. (2001) Chem. Eng. Sci. 56, 5893-5933
16. Kuo, J. and Wallis, G. (1988) Int. J. Multiphase Flow 14, 547-560
17. Ishii, M. and Zuber, N. (1979) AICHE J. 25, 845-855
18. Brucato, A., Grisafi, F. and Montante, G. (1998) Chem. Eng Sci. 53, 3295-3314
19. Drew, D. and Lahey, T. (1987) Int. J. Multiphase Flow 13, 113-122
20. Kowe, R., Hunt, J., Couet, B. and Bradbury, L. (1988) Int. J. Multiphase Flow 14, 587-598
21. Politus, S., Issa, R., Gosman, A., Lekakon, C. and Looney, M. (1992) AICHE J. 38, 1946-1953
22. Ansys Inc. (2003) Fluent Users Manual, chapter 23, pp. 6-8, Ansys, Inc., Lebanon, NH
23. Crowe, C., Sommerfield, M. and Yutaka, T. (1998) Multiphase flows with droplets and particles, CRC Press, Boca Raton, FL
24. Hsia, M. and Tavlarides, L. (1980) Chem. Eng. J. 30, 225-236
25. Tsouris, C. and Tavlarides, L. (1994) AICHE J. 40, 395-406
26. Coulalogou, C. and Tavlarides, L. (1977) Chem. Eng. Sci. 32, 1289-1297
27. Wichterle, K. (1995) Chem. Eng. Sci. 50, 3581-3586
28. Luo, H. and Svendsen, H. (1996) AICHE J. 42, 1225-1233
29. Luo, H. (1993) Ph.D. Thesis, Norwegian University of Science and Technology, Trondheim
30. Krishna, R. and van Baten, J. (2001) Chem. Eng. Sci. 56, 6249-6258
31. Hibiki, T. and Ishii, M. (2000) Nuclear Eng. Design 202, 39-76
32. Millies, M. and Mewes, D. (1999) Chem. Eng. Process. 38, 307-319
33. Olmos, E., Gentric, C., Vial, C., Wild, G. and Midoux, N. (2001) Chem. Eng. Sci. 56, 6359-6365
34. Ekambara, K. and Joshi, J. (2003) Can. J. Chem. Eng. 81, 669-676
35. Ghadge, R., Ekambara, K. and Joshi, J. (2005) Chem. Eng. Sci. 60, 6320-6335
36. Bouaifi, M., Hebrard, G., Bastoul, D. and Roustan, M. (2001) Chem. Eng. Process. 40, 97-111
37. Dhanasekharan, K., Sanyal, J., Jain, A. and Haidari, A. (2005) Chem Eng Sci. 60, 213-218
38. Simonin, O. (1990) Proc. 5th Workshop Two-Phase Flow: Predictions, Erlangen, Germany, 19-22 March 1990, pp. 156-166
39. Schiller, L. and Nauman, Z. (1993) Z. Ver. Dtsch. Ing. 77, 318-320
40. Unger, D., Muzzio, F., Aunins, J. and Sighvi, R. (1999) Biotechnol. Bioeng. 70, 117-130
41. Sucosky, P., Osorio, D., Brown, J. and Neitzel, P. (2004) Biotechnol. Bioeng. 85, 34-46
42. Brucato, A. and Micale, G. (1998) Chem. Eng. Sci. 53, 3653-3684
43. Bilgen, B., Chang-Mateu, M. and Barabino, G. (2005) Biotechnol. Bioeng. 92, 907-919
44. Boschetti, F., Raimondi, M., Migliavacca, F. and Dubini, G. (2006) J. Biomech. 39, 418-425
45. Zhang, H., William-Dalson, W., Keshavarz-Moore, E. and Shamlou, P. (2005) Biotechnol. Appl. Biochem. 41, 1-8
46. Brackbill, J., Kothe, D. and Zemach, C. (1992) Comp. Phys. 100, 335-354
47. Varley, J. and Birch, J. (1999) Cytotechnology 29, 177-205
48. Reuss, M., Schmalzriedt, S. and Jenne, M. (2000) in Bioreaction Engineering, vol. 4, Modelling and Control (Schügerl, K. and Bellgardt, K.-H. (eds), pp. 207-246, Springen Heidelberg
49. Calderbank, P. H. (1958) Trans. IchemE 36, 443-457
50. Lane, G., Schwarz, M. and Evans, G. (2000) in 10th European Conference on Mixing (Proceedings of the 10th European Conference on Mixing, Delft, The Netherlands, 2-5 July 2000) (van den Akker, H. E. A. and Derksen, J. J., eds), pp. 197-205, Elsevier Science B.V., Amsterdam
51. Bakker, A. (1992) Ph.D. Thesis, Delft University of Technology, The Netherlands
52. Davidson, K., Shrinivasan, S., Eggleton, C. and Marten, M. (2003) Biotechnol. Prog. 19, 1480-1496
53. Strauss, J., Sun, H. and Kiss, R. (2006) 232nd ACS National Meeting, San Francisco, CA, 10-14 September 2006
54. Lamping, S., Zhang, H., Allen, B. and Shamlou, P. (2003) Chem Eng. Sci. 58, 747-758
55. Wilkinson, P., Vanschayk, M., Spronken, J., Laurent, L. and Van Dierendonck, L. (1993) Chem Eng. Sci. 48, 1213-1226
56. Van't Riet, K. (1979) Ind. Eng. Chem. Proc. Design and Dev. 18, 357-364
57. Ghadge, R., Patwardhan, A. and Joshi, J. (2006) Biotechol. Prog. 22, 660-672
58. Morsi, S. and Alexander, A. (1972) J. Fluid Mech. 55, 193-208
59. Tatterson, G. (1991) Fluid Mixing and Gas Dispersion in Agitated Tanks, McGraw-Hill Inc., New York
60. Williams, K., Saini, S. and Wick, T. (2002) Biotechnol. Prog. 18, 951-963
61. Hristov, H., Mann, R., Lossev, V. and Vlaev, S. (2004) Trans. IChemE. 82(C1), 21-34
62. Bezzo, F., Macchietto, S. and Pantelides, C. (2003) AICHE J. 49, 2133-2148
63. Dhanasekharan, K. (2006) BioProcess Int. 4, 34-40
64. Strauss, J., Gupta, A. and Fotopoulos, A. (2006) 232nd ACS National Meeting, San Francisco, CA, 10-14 September 2006
65. Kulkarni, A., Ekambara, K. and Joshi, J. (2007) Chem. Eng. Sci. 62, 1049-1072
66. Buwa, V., Dhanannjay, D. and Ranade, V. (2006) Int. J. Multiphase Flow 32, 864-885
67. Lucas, D., Krepper, E. and Prasser, H. (2007) Chem. Eng. Sci. 62, 4146-4157
68. Risso, F. and Fabre, J. (1998) J. Fluid Mech. 373, 323-355
69. Laakkonen, M., Moilanen, p., Alopaeus, V. and Aittamaa, J. (2007) Chem. Eng. Sci. 62, 721-740
70. Gerlach, D., Alleborn, N., Buwa, V. and Durst, F. (2007) Chem. Eng. Sci. 62, 2109-2125
71. nd ACS National Meeting, San Francisco, CA, 10-14 September 2006, presentation BIOT 102
72. Bagchi, P., Johnson, P. and Popel, A. (2005) Trans. ASME 127, 1070-1080