A continuum damage model applied to high-temperature fatigue lifetime prediction of a martensitic tool steel

Fatigue and Fracture of Engineering Materials and Structures

Volumn 28, Issue 11, 2005, Pages 1009-1023

  Velay, V ^a   Bernhart, G ^a   Delagnes, D ^a   Penazzi, L ^a  

^a ECOLE DES MINES D ALBI CARMAUX   (France)

Author keywords

Continuum damage mechanics; Fatigue life prediction; High temperature fatigue; Tempered martensitic steels; Woehler curve

Indexed keywords

CONTINUUM MECHANICS; FATIGUE OF MATERIALS; MARTENSITE; MATHEMATICAL MODELS; STRAIN RATE; STRESS ANALYSIS;

CONTINUUM DAMAGE MECHANICS; FATIGUE LIFE PREDICTION; HIGH-TEMPERATURE FATIGUE; TEMPERED MARTENSITIC STEELS; WOEHLER CURVE;

STEEL;

EID: 28044451052     PISSN: 8756758X     EISSN: 14602695     Source Type: Journal    
DOI: 10.1111/j.1460-2695.2005.00939.x     Document Type: Article

References (44)

1. Bernhart G., Moulinier G., Brucelle O. and Delagnes D. (1999) High temperature low cycle behaviour of martensitic forging tool steel. International Journal of Fatigue 21, 179-186.
2. Zhang Z., Delagnes D. and Bernhart G. (2002) Anisothermal cyclic plasticity modeling of martensitic steels. International Journal of Fatigue 243, 635.
3. Velay V., Bernhart G. and Penazzi L. (2005) Cyclic behavior modeling of a tempered martensitic hot work tool steel. International Journal of Plasticity In Press.
4. Velay V., Bernhart G., Zhang Z. and Penazzi L. (2002) Cyclic behaviour modeling of martensitic hot work tool steel. In: High Temperature Fatigue Paderborn (Germany), 64-75, ISBN 3-00-009254-4.
5. Germain P. and Muller P. (1995) Introduction à la mécanique des milieux continus, Masson, 2° édition.
6. Halphen B. and Nguyen Q. (1974) Plastic and viscoplastic materials with generalized potential. Mechanics Research Communication 1, 43-47.
7. Chaboche J. (1989) Constitutive equations for cyclic plasticity and cyclic viscoplasticity. International Journal of Plasticity 5, 247-302.
8. Arnold S. and Saleeb A. (1994) On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling. International Journal of Plasticity 10, 263-278.
9. Fatemi A. and Yang L. (1998) Cumulative fatigue damage and life prediction theories: A survey of the state of the art for homogeneous materials. International Journal of Fatigue 20, 9-34.
10. Coffin L. (1977) Fatigue at high temperature. In: Fracture 1977, vol. 1 (Edited by W.C. ICF4) pp. 263-274 Waterloo, Ontario, Canada.
11. Coffin L. (1974) Fatigue at high temperature - prediction and interpretation. Proc Inst Mech Engrs 188, 109-127.
12. Delagnes D. (1998) Isothermal fatigue behaviour and lifetime of a 5% Cr hot work tool steel around the LCF-HCF transition, PhD thesis, Ecole Nationale Supérieure des Mines de Paris (in French).
13. Delagnes D. (2001) Fatigue-relaxation de 3 nuances d'aciers à outils pour travail à chaud, Rapport d'activité contrat cadre 2000-2001, Ecole des Mines d'Albi-Carmaux (in French).
14. th International Conference on Tooling (Leoben), pp. 687-697.
15. Glinka G., Shen G. and Plumtree A. (1995) A multiaxial fatigue strain energy density parameter related to the critical failure plane. Fatigue and Fracture of Engineering Materials and Structures 18, 37-46.
16. Halford G. and Saltsman J. (1985) Strain range partitioning - a total strain range version, NASA Lewis Research Center Cleveland, Ohio.
17. Lemaître J. and Chaboche J. (1994) Mechanics of Solid Materials, Cambridge University Press, Cambridge.
18. Yeom J., Williams S. and Park N. (2002) Low cycle fatigue life prediction for waspaloy. Materials at High Temperatures 19, 153-161.
19. Lesne P. (1985) Amorçage et propagation de fissures sous gradients thermiques cycliques, PhD thesis, Université des Sciences et Techniques de Lille.
20. Ostergren W (1976) A damage function and associated failure equations for predicting hold time and frequency effects in elevated temperature, low cycle fatigue. Journal of Testing and Evaluatian 4, 327-339.
21. Skelton R. (1981) Energy criterion for high temperature low cycle fatigue failure. Materials Science and Technology 7, 427.
22. Martin D. (1961) An energy criterion for low cycle fatigue. Journal of Basic Engineering 565-571.
23. Skelton R., Vilhelmsen T. and Webster G. (1998) Energy criteria and cumulative damage fatigue crack growth. International Journal of Fatigue 20, 641-649.
24. Charkaluk E., Bignonnet A., Constantinescu A. and Dang Van K. (2002) Fatigue design of structures under thermomechanical loadings. Fatigue and Fracture of Engineering Materials and Structures 25, 1199-1206.
25. Charkaluk E. and Constantinescu A. (2000) An energetic approach in thermomechanical fatigue for silicon molybdenum cast iron. Materials at High Temperatures 17, 373-380.
26. Charkaluk E. (1999) Dimensionnement des structures à la fatigue thermomécanique, PhD thesis, Ecole Polytechnique (in French).
27. th International Spring Meeting (Paris), pp. 351-362.
28. th International Spring Meeting (Paris), pp. 293-302.
29. Chaboche J. and Lesne P. (1988) A non linear continuous fatigue damage model. Fatigue and Fracture of Engineering Materials and Structures 11(1), 1-17.
30. Chaboche J., Kaczmarek H. and Raine P. (1980) Sur les effets d'interaction de l'écrouissage et de l'endommagement dans l'acier 316 1, La Recherche Aérospatiale, 177-196 (in French).
31. Chaboche J. (1974) Une loi différentielle d'endommagement de fatigue avec cumulation non linéaire, Revue Francaise de Mécanique, 50-51 (in French).
32. Lemaître J. and Chaboche J. (1978) Aspect phénomé nologique de la rupture par endommagement. Journal de Mécanique Appliquée 2, 317-365.
33. Gomez V. (2002) Etude en fatigue biaxiale à haute température d'alliages métalliques pour disques de turbomachines aéronautiques, PhD thesis, Université Paul Sabatier Toulouse 3.
34. Nicouleau-Bourles E. (1999) Etude expérimentale du vieillissement d'un alliage d'aluminium, application aux culasses d'automobiles, PhD thesis, Ecole Nationale Supérieure des Mines de Paris, (in French).
35. Shi H., Niu L., Korn C. and Pluvinage G. (2000) High temperature fatigue behaviour of TZM molybdenum alloy under mechanical and thermomechanical cyclic loads. Journal of Nuclear Materials 278, 328-333.
36. Xiao Y. (2004) A multi-mechanism damage coupling model. International Journal of Plasticity 26, 1241-1250.
37. Cailletaud G. and Levaillant C. (1984) Creep-fatigue interaction: What about initiation? Nuclear Engineering Design 83, 279-292.
38. Gallerneau F. (1995) Etude et modélisation de l'endommagement d'un superalliage monocristallin revètu pour aube de turbine, PhD thesis, Ecole Nationale Supérieure des Mines de Paris.
39. Lemaître J. and Plumtree A. (1979) Application of damage concepts to predict creep-fatigue failures. Journal of Engineering Materials and Technology 101, 284-292.
40. Velay V. (2003) Cyclic behavior modeling and lifetime assessment of martensitic hot work tool steels, PhD thesis, Ecole Nationale Supérieure des Mines de Paris (in French).
41. th International Tooling Conference, Karlstad (Sweden), 603-615.
42. Oudin A. (2001) Thermo-mechanical fatigue of hot work tool steels, PhD thesis, Ecole Nationale Supérieure des Mines de Paris (non-confidential version).
43. Lapovok R. (1995) A damage approach to fatigue fracture of tools in metal working processes. CSIRO, Division of Manufacturing Technology, Australia.
44. Lapovok R., Smirnov S. and Shveykin V. (1996) Ductility defined as critical local strain. First Australian Congress on Applied Mechanics.