Interfacial mixed-mode fracture characterization of adhesively bonded joints

International Journal of Adhesion and Adhesives

Volumn 28, Issue 6, 2008, Pages 267-282

  Choupani, Naghdali ^a  

^a SAHAND UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

B Interfaces; C Fracture mechanics; Mixed mode criterion

Indexed keywords

ADHESIVES; FINITE ELEMENT METHOD; FRACTURE TOUGHNESS;

C-FRACTURE MECHANICS; MIXED-MODE CRITERION;

BOND STRENGTH (CHEMICAL);

EID: 41049094977     PISSN: 01437496     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijadhadh.2007.08.002     Document Type: Article

References (61)

1. Kinloch A.J. Adhesion and adhesives: science and technology (1987), Chapman & Hall, London
2. Rice J.R. Elastic fracture mechanics concepts for interfacial cracks. J Appl Mech 55 (1988) 98-103
3. Ducept F., Davies P., and Gamby D. Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint. Int J Adhes Adhes 20 (2000) 233-244
4. Baldan A. Adhesively-bonded joints in metallic alloys, polymers and composite materials: mechanical and environmental durability performance. J Mater Sci 39 15 (2004) 4729-4797
5. Butkus LM. Environmental durability of adhesively bonded joints. The Georgia Institute of Technology, WPAFB OH, Report no. 97-028D, 14 October 1997.
6. Gilbert E.N., Hayes B.S., and Seferis J.C. Nano-alumina modified epoxy based film adhesives. Polym Eng Sci 43 5 (2003) 1096-1104
7. Pirondi A., and Nicoletto G. Mixed mode I/II fracture toughness of bonded joints. Int J Adhes Adhes 22 2 (2002) 109-117
8. Banks-Sills L., and Ashkenazi D. A note on fracture criteria for interface fracture. Int J Fract 103 (2000) 177-188
9. Nied H.F. Mechanics of interface fracture with applications in electronic packaging. IEEE Trans Device Mater Reliab 3 4 (2003)
10. Pang HLJ, Zhang XR, Shi XQ, Wang ZP. Modeling interface fracture in flip chip assembly, Presented at 52nd electronic components and technology conference, May 28-31, 2002, San Diego, CA.
11. Machida K. Fracture toughness test of small CNS specimen with an interface crack subjected to mixed-mode loading. In: Fracture and strength of solids, Parts 1 and 2, vol. 183-1. Key Engineering Materials, 2000. p. 49-54.
12. Yau JF, Wang SS. An analysis of interface cracks between dissimilar isotropic materials using conservation integrals in elasticity, University of Illionois, Report no. NASA CR 165438, 1984.
13. Wang C.H. Fracture of interface cracks under combined loading. Eng Fract Mech 56 1 (1997) 77-86
14. Shih C.F. Cracks on bimaterial interfaces: elasticity and plasticity aspects. Mater Sci Eng A 143 (1991) 77-90
15. Leslie Banks-Sills N.T., Ashkenazi D., and Elaisi R. A methodology for measuring interface fracture properties of composite materials. Int J Fract 99 (1999) 143-160
16. Ryoji Yuuki J.-Q.L., Xu J.-Q., Ohira T., and Ono T. Mixed mode fracture criteria for an interface crack. Eng Fract Mech 47 3 (1994) 367-377
17. Miller TC. Mode mixity determinations for interfacial cracking in incompressible materials under plane strain conditions. Air Force Research Laboratory (AFMC), Technical Report No. 1011-CA9F, 22 April 1998.
18. Wang J., Lu M., Ren W., Zou D., and Liu S. Study of the mixed-mode interfacial fracture toughness of adhesive joints using a multiaxial fatigue tester. IEEE Trans Electron Packaging Manuf 22 2 (1999) 166-167
19. Dollhofer J., Beckert W., Lauke B., and Schneider K. Fracture mechanics characterization of mixed-mode toughness of thermoplast/glass interfaces (brittle/ductile interfacial mixed-mode fracture). J Adhes Sci Technol 15 13 (2001) 1559-1587
20. Masuoka M. Mechanism of interfacial bond failure. Int J Adhes Adhes (1982) 223-232
21. Arcan M., Hashin Z., and Voloshin A. A method to produce plane-stress states with applications to fiber-reinforced materials. Exp Mech 18 (1978) 141-146
22. Banks-Sills L., Arcan M., and Bortman Y. A mixed mode fracture specimen for mode II dominant deformation. Eng Fract Mech 20 1 (1984) 145-157
23. Pang H.L.J., Zhang X.R., Shi X.Q., and Wang Z.P. Interfacial fracture toughness test methodology for adhesive bonded joints. IEEE Trans Components Packaging Technol 25 2 (2002) 187-191
24. Pang H.L.J. Mixed-mode fracture analysis and toughness of adhesive joints. Eng Fract Mech 51 4 (1995) 575-583
25. Rikards R. Interlaminar fracture behaviour of laminated composites. Comput Struct 76 1-3 (2000) 11-18
26. Sukumar N., Huang Z.Y., Prevost J.H., and Suo Z. Partition of unity enrichment for bimaterial interface cracks. Int J Numer Methods Eng 59 8 (2004) 1075-1102
27. Nayeb-Hashemi P.Y.H. Mixed mode I/II fracture and fatigue crack growth along 63SN-37PB solder/brass interface. Int J Fatigue 23 (2001) S325-S335
28. Sun C.T., and Jih C.J. On strain energy release rates for interfacial cracks in bi-material media. Eng Fract Mech 28 1 (1987) 13-20
29. Ikeda T., Miyazaki N., and Soda T. mixed mode fracture criterion of interface crack between dissimilar materials. Eng Fract Mech 59 6 (1998) 725-735
30. Wang X.D., and Agrawal C.M. A mixed mode fracture toughness test of bone-biomaterial interfaces. J Biomed Mater Res 53 6 (2000) 664-672
31. Wang J.-S. Interfacial fracture toughness of a copper/alumina system and the effect of the loading phase angle. Mech Mater 20 3 (1995) 251-259
32. Nishioka T., Syano S., and Fujimoto T. Concepts of separated J-integrals, separated energy release rates, and the component separation method of the J-integral for interfacial fracture mechanics. J Appl Mech Trans ASME 70 (2003) 505-512
33. Ducept F., Davies P., and Gamby D. An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites. Compos Part A: Appl Sci Manuf 28 8 (1997) 719-729
34. Ducept F., Gamby D., and Davies P. A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimens. Compos Sci Technol 59 4 (1999) 609-619
35. Buchholz F.G., Rikards R., and Wang H. Computational analysis of interlaminar fracture of laminated composites. Int J Fract 86 (1997) 37-57
36. Rikards R., Buchholz F.-G., Wang H., Bledzki A.K., Korjakin A., and Richard H.-A. Investigation of mixed mode I/II interlaminar fracture toughness of laminated composites by using a CTS type specimen. Eng Fract Mech 61 3-4 (1998) 325-342
37. Pang HLJ, Zhang XR, Lim CH, Shi XQ, Wang ZP. Interfacial fracture toughness test methodology for flip chip underfill encapsulant, presented at electronic components and technology conference, 2002. Proceedings 52nd, 2002.
38. Pang HLJ, Bong SN, Shi XQ, Wang ZP. Mixed mode fracture toughness characterization for interface and interlayer cracks in adhesive bonded joints, presented at electronic materials and packaging (EMAP 2000), 2000.
39. Pang H.L.J., and Seetoh C.W. A compact mixed mode (CMM) fracture specimen for adhesive bonded joints. Eng Fract Mech 57 1 (1997) 57-65
40. Pang H.L.J. Mixed mode fracture analysis and toughness of adhesive joints. Eng Fract Mech 51 4 (1995) 575-583
41. Pang H.L.J. Stress intensity factors for mixed-mode fracture in adhesive-bonded joints. Int J Fatigue 16 6 (1994) 413-416
42. Machida K. Polynomial evaluation of stress intensity factors of CNS specimen with an interface crack subject to mixed-mode loading. JSME Int J Ser A 42 1 (1999) 57-65
43. Machida K. Stress-intensity factors of three-dimensional interface crack under mixed mode loading by finite element analysis. Key Engineering Materials 49 (1998) 589-594
44. Machida K, Geni M, Okamura H. Fracture mechanics parameters governing delaminated interfaces in Ic packages subjected to unsteady thermal stress. In: Geni M, Kikuchi M, editors. Progress in experimental and computational mechanics in engineering, vol. 243-2. Key Engineering Materials, 2003. p. 393-8.
45. Yoon S.H., and Hong C.S. Interlaminar fracture toughness of graphite/epoxy composite under mixed-mode deformations. Exp Mech 30 3 (1990) 234-239
46. Jurf R.A., and Pipes R.B. Interlaminar fracture of composite materials. J Compos Mater 16 (1982) 386-394
47. Cytec, FM300-2 Film adhesive, Cytec Engineered Materials, 1998.
48. Vodicka R. Flow testing of Cytec FM300 and FM300-2K structural adhesives, DSTO, Melbourne, Report, 2001.
49. ASTM D2651-90, Standard guide for preparation of metal surfaces for adhesive bonding: annual book of ASTM standards, 1995.
50. Daghyani H.R., Ye L., and Mai Y.-W. Mixed-mode fracture of adhesively bonded CF/epoxy composite joints. J Compos Mater 30 11 (1996) 1248-1265
51. Habbit, Karlsson, Sorensen, ABAQUS user's manual, version 6.2.4, 2001.
52. Wei L.W., Edwards L., and Fitzpatrick M.E. FE analysis of stresses and stress intensity factors of interfacial cracks in a CTS specimen. Eng Fract Mech 69 1 (2002) 85-90
53. Liu S., Mei Y., and Wu T.Y. Bimaterial interfacial crack growth as a function of mode-mixity. IEEE Trans of Components Packaging Manuf Technol Pt A 18 3 (1995) 618-626
54. Shi X.Q., Zhang X.R., and Pang J.H.L. Determination of interface fracture toughness of adhesive joint subjected to mixed-mode loading using finite element method. Int J Adhes Adhes 26 (2006) 249-260
55. Banks-Sills L., and Schwartz J. Fracture testing of Brazilian disk sandwich specimens. Int J Fract 118 3 (2002) 191-209
56. Madhusudhana K.S., and Narasimhan R. Experimental and numerical investigations of mixed mode crack growth resistance of a ductile adhesive joint. Eng Fract Mech 69 7 (2002) 865-883
57. Yuuki R., et al. Mixed mode fracture criteria for an interface crack. Eng Fract Mech 47 3 (1994) 367-377
58. Wang C.H., and Chalkley P. Plastic yielding of a film adhesive under multiaxial stresses. Int J Adhes Adhes 20 (2000) 155-164
59. Liechti K.M., and Chai Y.-S. Asymmetric shielding in interfacial fracture under in-plane shear. J Appl Mech 57 (1992) 295-304
60. Liang Y.-M., and Liechti K.M. Toughening mechanisms in mixed-mode interfacial fracture. Int J Solids Struct 32 6/7 (1995) 957-978
61. Swadener J.G., Liechti K.M., and Liang II Y.-M. Shear induced toughening in bonded joints: experiments and analysis. Int J Fract 114 (2002) 113-132