Adhesively-bonded joints in metallic alloys, polymers and composite materials: Mechanical and environmental durability performance

Journal of Materials Science

Volumn 39, Issue 15, 2004, Pages 4729-4797

  Baldan, A ^a  

^a MERSIN UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ALLOYS; COMPOSITE MATERIALS; DEGRADATION; DURABILITY; ENVIRONMENTAL PROTECTION; FAILURE ANALYSIS; INTERFACES (MATERIALS); LOADS (FORCES); POLYMERS; SHEAR STRESS;

ADHESIVE LAYERS; DISCRETE MODELS; ENVIRONMENTAL DURABILITY; FAILURE MODES;

ADHESIVE JOINTS;

EID: 3242770547     PISSN: 00222461     EISSN: None     Source Type: Journal    
DOI: 10.1023/B:JMSC.0000035317.87118.ab     Document Type: Review

References (269)

1. F. L. MATHEWS, "Handbook of Polymer Composites for Engineeres" (Woodhead Publishing Limited, Cambridge, UK, 1999).
2. M. DAVIS and D. BOND, Int. J. Adhesion Adhesives 19 (1999) 91.
3. A. R. RISPLER, L. TONG, G. P. STEVEN and M. R. WINSOM, ibid. 20 (2000) 221.
4. L. J. HART-SMITH, in "Joining Fiber Reinforced Plastics," edited by F. L. Mathews (Elsevier, London, 1987).
5. J. F. P. OWENS and P. LEE-SULLIVAN, Int. J. Adhesion Adhesives 20 (2000) 39.
6. D. H. KOHLI, ibid. 19 (1999) 231.
7. R. E. POLITI, SAMPE International Technical Conference (1987) Vol. 19, p. 36.
8. MEL M. SCHWARTZ, "Composite Materials Handbook," 2nd ed. (McGraw-Hill, 1992) p. 6.39.
9. A. B. CARTER, SAMPE J. 25(4) (1989) 21.
10. L. J. HART-SMITH, Int. J. Adhesion Adhesives 19 (1999) 181.
11. E. PAUL DE GARMO, J. T. BLACK and R. A. KOHSER, "Materials and Processes in Manufacturing," 8th ed. (Prentice-Hall, 1997) Chap. 8, p. 1051.
12. A. HIGGINS. Int. J. Adhesion Adhesives 20 (2000) 367.
13. J. K. JETHWA and A. J. KINLOCH, J. Adhesion 61 (1997) 71.
14. C. H. WANG and P. CHALKLEY, Int. J. Adhesion Adhesives 20 (2000) 155.
15. R. N. HAWARD, "The Physics of Glassy Polymers" (Applied Science Publishers, London, 1973).
16. P. B. BOWDEN and J. A. JUKES, J. Mater. Sci. 7 (1972) 52.
17. M. Y. M. CHIANG and H. CHAI, Int. J. Solids Struct. 31 (1994) 2477.
18. C. H. WANG and L. F. R. ROSE, Int. J. Adhesion Adhesives 17 (1997) 17.
19. J. D. FERRY, "Viscoelastic Properties of Polymers" (Wiley, New York, 1980).
20. P. MOLITOR, V. BARRON and T. YOUNG, Int. J. Adhesion Adhesives 21 (2001) 129.
21. L. J. HART-SMITH, Adhesive-Bonded Single Lap Joints, NASA CR 112236, January 1973.
22. M. KALNINS and J. OZOLINS, Int. J. Adhesion Adhesives 22 (2002) 179.
23. M. KALNINS, "Adhesive Interaction of Polyethyelene with Steel" (Riga. Latvia, Zinatne, 1990) p. 143.
24. M. KALNINS, J. Adhesion 35 (1991) 173.
25. M. KALNINS and J. MALERS, ibid. 50 (1995) 83.
26. M. R. BOWDITCH, Int. J. Adhesion Adhesives 16 (1996) 13.
27. W. BROCKMAN, The Environmental Resistance of Metal Bonds in New Industries and Applications for Advanced Materials Technology, 19th SAMPE Symp., Exhibition, Azuza, CA, 1974.
28. M. M. ABDEL WAHAB, A. D. CROCOMBE, A. BEEVERS and K. EBTEHAJ, Int. J. Adhesion Adhesives 22 (2002) 61.
29. E. M. KNOX and M. J. COWLING, ibid. 20 (2000) 323.
30. S. SMILTNIEKS and G. M. SPINKS, in Proc. of Structural Adhesives in Engineering (V. Bristol, UK, Inst. of Materials, 1998), p. 47, ISBN 1-86125-066-5.
31. D. G. LEE, J. W. KWON and D. H. CHO, J. Adhesion Sci. Technol. 12 (1998) 1253.
32. A. J. KINLOCH, in "Durability, of Structural Adhesives," edited by A. J. Kinloch (Elsevier, Amsterdam, Applied Science, 1983).
33. E. M. KNOX and M. J. COWLING, Int. J. Adhesion Adhesives 20 (2000) 201.
34. D. J. ARROWSMITH and A. MADDISON, ibid. 7 (1987) 15.
35. CONSTANTINO. CRETON, "Materials Science of Pressure Sensitive Adhesives, Materials Science and Technology; Processing of Materials," edited by R. W. Cahn, P. Haasen and E. J. Kramer (Wiley-VCH, Weinheim, Germany, 1997) Vol. 18, p. 724.
36. A. GUIU and M. E. R. SHANAHAN, Int. J. Adhesion Adhesives 22 (2002) 415.
37. K. CHO, H. R. BROWN and D. C. MILLER, J. Polym. Sci. Polym. Phys. 28 (1990) 1699.
38. E. BOUCHER, J. P. FOLKERS, M. HERVET and C. CRETON, Macromolecules 29 (1996) 774.
39. A. BALDAN, J. Materials Sci. 39 (2004) 4729.
40. H. H. RAUSCH and M. TIRRELL, Annu. Rev. Mater. Sci. 19 (1989) 341.
41. R. P. WOOL, B. L. YUAN and O. MCGAREL, J. Polym. Eng. Sci. 29 (1989) 1340.
42. A. N. GENT and A. AHAGON, J. Polym. Sci. Phys. 13 1975) 1285.
43. A. N. GENT and R. P. PETRICH. Proc. R. Soc. London A 310 (1969) 433.
44. M. SHANAHAN and C. BOUNGOS-MONNIER, Int J. Adhesion Adhesives 16 (1996) 129.
45. A. N. GENT and G. R. HAMED, Polym. Eng. Sci. 17 (1977) 462.
46. G. LI and P. LEE-SULLIVAN, Int. J. Adhesion Adhesives 21 (2001) 211.
47. P. B. LINDLEY. J. Inst. Rubber Ind. 5 (1971) 243.
48. M. A. ANSARIFAR, J. ZHANG, J. BAKER, A. BELL and R. J. ELLIS, Int. J. Adhesion Adhesives 21 (2001) 369.
49. M. A. ANSARIFAR, J. ZHANG, A. BELL and R. J. ELLIS, ibid. 22 (2002) 245.
50. D. W. AUBREY, G. N. WELDING antt T. WONG. J. Appl. Polym. Sci. 13 (1969) 2193.
51. C. DRAIL, A. ALLAL, G. MARTIN and P., TORDJEMAN, J. Adhesion 61 (1997) 123.
52. C. G'SELL and J. J. JONES, J. Mater. Sci. 14 (1977) 583.
53. Idem.,ibid. 16 (1981) 1956.
54. D. W. V ANKREVELEN, "Properties of Polymers: Their Correlation with Chemical Structure" (Elsevier, Amsterdam, 1990).
55. J. VERDU, Materiaux Polymers, Relations, Structure- Propriétés. Lectures ENSAM, Paris, 1992.
56. F. H. HAMMOD, ASTM Spec. Tcch. Publ. 360 (1964) 123.
57. D. KALELBLE, Trans. Soc. Rheol. 4 (1960) 45.
58. J. JOHNSON, Adhesive Age 11 (1968) 20.
59. T. IGARASHI, J. Polym. Sci. Polym. Phys. Phys. Ed. 13 (1975) 2129.
60. B. D. AGARWAL and L. J. BROUTMAN, "Analysis and Performance of Fiber Composites," 2nd ed. (John Wiley and Sons, Inc., 1990) p. 277.
61. G. BELINGARDI, L. GOGLIO and A. TARDITI, Int. J. Adhesion Adhesives 22 (2002) 273.
62. T. P. LANG and P. K. M ALLICK, ibid. 19 (1999) 257.
63. C. SATO and K. IKEGAMI, ibid. 20 (2000) 17.
64. R. BALKOVA, S. HOLONEROVA and V. CECH, ibid. 22 (2002) 291.
65. M. R. MAHERI and R. D. ADAMS, Ibid. 22 (2002) 119.
66. C. H. WANG and L. R. F. ROSE, ibid. 20 (2000) 145.
67. A. R. RISPLER and L. TONG, ibid. 20 (2000) 221.
68. J. COTTON, J. W. GRANT, M. K. JENSEN and B. J. LOVE, ibid. 21 (2001) 65.
69. G. LI and P. LEE-SULLIVAN, ibid. 21 (2001) 211.
70. R. D. ADAMS, J. COMYN and W. C. WAKE, "Structural Adhesive Joints in Engineering" (Kluwer Academic Publishers, London, 1997).
71. O. VOLKERSEN, Luftfahrtforschung 15 (1938) 41.
72. M. GOLAND and E. REISSNER, J. Appl. Mech. 11A (1944) 17.
73. W. LI, L. BLUNT and K. J. STOUT, Int. J. Adhesion Adhesives 19 (1999) 315.
74. L. F. M. DASILVA and R. D. ADAMS, ibid. 22 (2002) 311.
75. L. D. R. GRANT, The Characterisation of Adhesive Joints Found Typical in the Automotive Industry, Ph.D. Dissertation, University of Bristol, 1994.
76. R. A. SHENOI and F. L. M. VIOLETTE, J. Compos. Mater. 34 (1990) 644.
77. R. A. BARTHOLOMEUSZ, A. SEARL, A. A. BAKER and R. J. CHESTER, Bonded Composite Reinforcement of the F/A-18 Y470.5 Bulkhead, Applications with Through Thickness Stresses. International Aerospace Congress, Sydney, 24-27 Feb. 1997.
78. C. H. WANG and L. R. F. ROSE, Int. J. Adhesion Adhesives 17 (1997) 17.
79. M. Y. M. CHIANG and H. CHAI, Int. J. Solids Struct. 31 (1994) 2477.
80. R. B. HESLEHURST, Int. J. Adhesion Adhesives 19 (1999) 133.
81. W. K. LOH, A. D. CROCOMBE, M. M. ABDEL WAHAB and I. A. ASHCROFT, Eng. Fracture Mechanics 69 (2002) 2113.
82. A. J. KINLOCH, Adhesion 10 (1979) 193.
83. J. W. WYLDE and J. K. SPELT, Int. J. Adhesion Adhesives 18 (1998) 237.
84. I. A. ASHCROFT, M. M. ABDEL WAHAB, A. D. CROCOMBE, D. J. HUGHES and S. J. SHAW, Composites, Part A 32 (2001) 45.
85. M. M. ABDEL WAHAB, I. A. ASHCROFT, A. D. CROCOMBE, D. J. HUGHES and S. J. SHAW, ibid. 32 (2001) 59.
86. D. BREWIS, J. COMYN and J. TEGG, Int. J. Adhesion Adhesives 1 (1980) 35.
87. J. CRANK and G. PARK (eds), "Diffusion in Polymers" (New York, Academic Press, 1968).
88. D. R. LEFEBURE, D. A. DILLARD and T. C. WARD, J. Adhesion 27 (1989) 1.
89. A. KAUL, N. SUNG, I. CHIN and C. SUNG, Polym. Eng. Sci. 24 (1984) 493.
90. B. R. K. BLACKMAN, J. P. DEAR, A. J. KINLOCH, H. MACGILLIVRAY, Y. WANG, J. G. WILLIAMS and P. YAYLA, J. Mater. Sci. 30 (1995) 5885.
91. R. H. ANDRUET, D. A. DILLARD and S. M. HOLZER, Int. J. Adhesion Adhesives 21 (2000) 17.
92. J. P. M. GONÇALVES, M. F. S. DE MOURA and P. M. S. T. DECASTRO, ibid. 22 (2002) 357.
93. O. VOLKERSEN, Constr. Met. 4 (1965) 3.
94. L. J. SEGERLIND, J. Appl. Mech. 35 (1968) 177.
95. W. J. RENTON and J. R. VINSON, ibid. 44 (1977) 101.
96. J. U. OJALVO and H. L. EIDINOFF, AIAA J. 16 (1978) 204.
97. D. A. BIGWOOD and A. D. CROCOMBE, Int. J. Adhesion Adhesives 9 (1989) 229.
98. G. R. WOOLEY and D. R. CARVER, J. Aircraft 8 (1971) 817.
99. T. R. GUESS, R. E. ALLREDA and F. P. GERSTLE, J. Test. Eval. 5 (1977) 84.
100. N. I. HARRISON and W. J. HARRISON, J. Adhesion 3 (1972) 195.
101. R. D. ADAMS and N. A. PEPPIATT, J. Strain Anal. 9 (1974) 185.
102. D. W. OPLINGER, Int. J. Solids Struct. 31 (1994) 2565.
103. L. J. HART-SMITH, "Adhesive Bonded Single Lap Joints," NASA Contractor Report 112236, 1973.
104. D. W. OPLINGER, A Layered Beam Theory For Single Lap Joints. Army Materials Technology Laboratory Report MTL TR 91-23, 1991.
105. M. V. TSAI and J. MORTON, Int. J. Solids Struct. 31 (1994) 2537.
106. A. TOWSE, K. D. POTTER, M. R. WINSOM and R. D. ADAMS, Int. J. Adhesion Adhesives 19 (1999) 71.
107. R. B. HESLEHURST, Repair of Composite and Bonded Aircraft Structures, Course Notes. Australia Defence Force Academy.
108. R. B. HESLEHURST, J. P. BAIRD, H. M. WILLIAMSON and R. K. CLARK, Can Aging Adhesively Bonded Joints be Found? in Proc. 41st SAMPE Int. Symp. And Exhibition, Anaheim, CA, 1996, p. 925.
109. Locitite Corporation. In: Locitite Worlwide Design Handbook, Edition 1996/1997.
110. M. A. ANSARIFAR and G. J. LAKE, J. Adhesion 53 (1995) 183.
111. C. XU, K. RAMANI and G. KUMAR, Int. J. Adhesion Adhesives 22 (2002) 187.
112. W. FUNKE, J. Coat. Technol. 55 (1985) 31.
113. A. H. LANDROCK, "Adhesive Technology Handbook" (Noyes Publication, Park Ridge, NJ, 1985).
114. I. KULESHOV, S. KAIBIN and M. KALNINS, Vysokomol Soedin B 25 (1983) 366.
115. J. BIKERMAN, J. Adhesion 3 (1972) 333.
116. J. A. HARRIS and R. D. ADAMS, Int. J. Adhesion Adhesives 4 (1984) 65.
117. A. J. KINLOCH,. J. Mater. Sci. 17 (1980) 617.
118. W. BROCKMAN, "Durability of Structural Adhesives," edited by A. J. Kinloch (Amsterdam, Elsevier Applied Science Publishers, 1983), p. 306, Chap. 7.
119. S. A. HASHIM and M. J. COWLING, in Proceedings of the Structural Adhesives in Engineering IV (Bristol, UK, Inst. of Materials, 1995) p. 245.
120. W. ALTHOF, Verfahren zur Ermittlung von Schubspannungs Gleitungs Diagrammen von Konstruktions Klebstoffen in dünnen Klebschichten, DFVLRIB 152-74/18, 1974.
121. R. B. KRIEGER, "Stiffness Characteristics of Structural Adhesives for Stress Analysis in Hostile Environment" (American Cyanamid Co., Havre de Grace, MD, 1975).
122. R. D. ADAMS and J. OPPENDALE, J. Mech. Eng. Sci. 18 (1976) 149.
123. J. D. BARDIS and K. T. KEDWARD, Department of Mechanical and Environmental Engineering University of California, Santa Barbara, CA 93106.
124. JEANS-YVES SENER, T. FERRACIN, L. CAUSSIN and F. DELANNAY. Int. J. Adhesion Adhesives 22 (2002) 129.
125. P. B. CROSLEY and E. J. RIFLING, J. Test. Eval. 19 (1991) 24.
126. D. J. CHANG, R. MUKI and A. WESTMANN, Int. J. Solids and Structures 12 (1976) 13.
127. F. E. PENADO J. Comp. Mater. 27 (1993) 383.
128. A. K. EL-SENUSSI and J. P. H. WABBER, J. Appl. Phys. 56 (1984) 885.
129. J. COGNARD,. J. Adhesion 57 (1996) 31.
130. S. J. BENNISON, G. A. ANDREJACK and L. A. SILVERMAN, in Proc. Euradh'96 (Cambridge University Press, 1996) p. 439.
131. E. J. RIPLING, S. MOSTOVOY and R. L. PATRICK, Mater. Res. Standards (ASTM Bulletin) 4(3) (1964) 129.
132. S. MOSTOVOY, P. B. CROSLEY and E. J. RIPLING, J. Mater. 2 (1961) 661.
133. ASTM, ASTM D3433, in Annual Book of ASTM Standards: Adhesion Section 15, Philadalphia, 1990.
134. B. R. K. BLACKMAN, H. HADAVINIA, A. J. KINLOCH, M. PARASCHI and J. G. WILLIAMS, Eng. Fracture Mech. 70 (2003) 233.
135. J. COGNARD, J. Adhesion 22 (1987) 97.
136. Idem., ibid. 20 (1986) 1.
137. E. J. RIPLING, S. MOSTOVOY and C. BERSCH, ibid. 3 (1971) 145.
138. F. SLOAN, J. Comp. Mater. 27 (1993) 1606.
139. W. S. JOHNSON and L. M. BUTKUS, Fatigue and Fract. Engng. Mater. Struct. 21 (1988) 465.
140. JONG-KYO KIM and YIU-WING MAI, "Interfaces in Composites," Materials Science and Technology, edited by R. W. Cahn, P. Haasen and E. J. Kramer, Structure and Properties of Composites (VCH, Weinheim, 1993) Vol. 13, p. 241.
141. M. A. ANSARIFAR and G. J. LAKE, Failure of Rubber-to-Metal Bonded Units, Adhesion 93, The Fifth Int. Conference of the Adhesives, Section of the Polymer Industry Divisionn of the Institute of Materials, York, UK, 1993.
142. T. SCHÜLLER and B. LAUKE, Int. J. Adhesion Adhesives 22 (2002) 169.
143. British Standard, BS 903, Part A21, 1989.
144. ASTM: D429-81. Annual Book of ASTM Standards, vol. 09.01, 1993.
145. ASTM: D429-64, Method B and ASTM: D429-64, Method C.
146. T. SCHÜLLER, W. BECKERT, B. LAUKE and K. FRIEDRICH, Comp. Sci. Technol. 60 (2000) 2077.
147. B. R. K. BLACKMAN, A. J. KINLOCH, A. C. TAYLOR and Y. WANG, J. Mater. Sci. 35 (2000) 1867.
148. P. A. FAY, R. E. DAVIS and G. D. SUTHURST, in Proc. of Impact and Fatigue Testing of Adhesives (Plastics and Rubber Institute, London, 1990).
149. R. A. DICKIE and S. M. WARD, in "Mittel Festschrift," edited by W. J. van Ooij and H. R. Anderson (VSP, Zeist, 1997) p. 1.
150. International Standard Organisations, ISO 11343 (ISO, Geneva, 1993).
151. L. TONO and G. P. STEVENS, "Analysis and Design of Structural Bonded Joints" (Kluwer, Dortrecht, 1999.
152. A. D. CROCOMBE and R. D. ADAMS, J. Adhesion 13 (1981) 141.
153. R. D. ADAMS, R. W. ATKINS, J. A. HARRIS and A. J. KINLOCH, ibid. 20 (1986) 29.
154. H. L. GROTH, Int. J. Adhesion Adhesives 11 (1991) 204.
155. R. D. ADAMS and N. A. PEPPIATT, J. Strain Anal. 9 (1974) 185.
156. L. DORN and L. WEIPING, Int. J. Adhesion Adhesives 13 (1993) 21.
157. M. HILDEBRAND, ibid. 14 (1994) 261.
158. T. P. LANG and P. K. MALLICK, ibid.18 (1998) 167.
159. Idem., ibid. 19 (1999) 257.
160. R. D. ADAMS and J. A. HARRIS, ibid. 16 (1996) 61.
161. J. A. HARRIS and R. D. ADAMS, An Assessment of the Impact Performance of Bonded Joints for Use in High Energy Absorbing Structures, in Proc. Inst. Mech. Engrs. 199 (1985) 121.
162. A. J. KINLOCH and G. A. KODOKIAN, J. Adhesion 24 (1987) 109.
163. J. L. LATAILADE and C. KEISLER, Charobonnet, ph. Effect of the Substrate on the Adhesion in Adhesive Bonds Loading at High Strain Rate, Preprint EURADH 92 (1992) 585.
164. F. CAYSSIALS and J. L. LATAILLADE, J. Adhesion 58 (1996) 584.
165. T. YOKOYAMA, "A New Test Technique for Determining the Impact Shear Strength of Adhesive Joints," in Proceedings of the ATEM' 97, 1997, p. 221.
166. A. A. BEZEMER, C. B. GUYT and A. VOLT, Int. J. Adhesion Adhesives 18 (1998) 255.
167. L. W. ZACHARY and C. P. BURGER, Exp. Mech. 20 (1980) 162.
168. K. R. BERG, "Problems in the Design of Joints and Attachments," edited by F. W. Wendt, H. L. Liebowitz and N. Perrone (Mechanics of Composite Materials, Pergamon, New York, 1970).
169. J. HART-SMITH, Adhesive-Bonded Double Lap Joints, NASA Contractual Report, NASA CR-112235, January 1973.
170. R. B. HESLEHURST, Ph.D, Dissertation, School of Aerospace and Mechanical Engineering, University College, UNSW, ADFA, Canberra, 1998.
171. D. A. BIGWOOD and A. D. CROCOMBE, Int. J. Adhesion Adhesives 10 (1990) 31.
172. G. RICHARDSON, A. D. CROCOMBE and P. A. SMITH, ibid. 13 (1993) 193.
173. M. V. TSAI. J. Morton. Mech. Mater. 20 (1995) 183.
174. M. V. TSAI, J. Morton, Comp. Struct. 32 (1995) 123.
175. M. Y. TSAI and J. MORTON, J. Comp. Mater. 29 (1995) 1163.
176. M. Y. TSAI, D. W. OPLINGER and J. MORTON, Int. J. Solids Struct. 35 (1998) 1163.
177. W. C. CARPENTER, J. Adhesion 35 (1991) 55.
178. W. K. CHIU and R. JONES, Int. J. Adhesion Adhesives 12 (1992) 219.
179. M. Y. TSAI and J. MORTON, J. Strain Anal. 29 (1994) 137.
180. C. H. WANG and L. R. F. ROSE, J. Adhesion Adhesives 17 (1997) 17.
181. G. LI, P. LEE-SULLIVAN and R. W. THRIG, Comp. Struct. 46 (1999) 395.
182. F. P. BEER and R. JOHNSON, "Mechanics of Materials," Metric, ed. (McGraw-Hill, England, 1992).
183. S. YADIGARI, C. PAPI REDDY and T. SANJEEVA REDDY, Comp. Struct. 27 (1987) 445.
184. W. C. CARPENTER and R. BARSOUM, J. Adhesion 30 (1989) 25.
185. S. AMIJIMA and T. FUJII, Int. J. Adhesion Adhesives 7 (1987) 199.
186. M. V. TAYLOR, M.Sc. Degree, Engineering Mechanics Department of Virgina Polytechnic Institute and State University, Blacksburg, VA, 1996.
187. S. NABOULSI and S. MALL, Theoret. Appl. Fracture Mech. 26 (1997) 1.
188. J. N. REDDY, "An Introduction to the Finite Element Method," 2nd ed. (McGraw-Hill, New York, 1993).
189. K. J. BATHE, "Finite Element Procedures" (Prentice-Hall, Englewood Cliffs, NJ, 1996).
190. H. L. GROWTH, Int. J. Adhesion Adhesives 8 (1988) 107.
191. A. D. CROCOMBE, D. A. BIGWOOD and G. RICHARD, ibid. 12 (1990) 167.
192. R. D. ADAMS, J. Adhesion 30 (1989) 219.
193. T. SCHÜLLER, W. BECKERT, B. LAUKE, C. AGEORGES and K. FRIEDRICH, Composites A 31 (2001) 661.
194. ABAQUS, General-Purpose Finite Element System, Hibbit, Karlson and Sorensen, Inc., 100 Medway Street, Providence, RI, 1997.
195. S. K. MAZUMDER and P. K. MALLICK, Polym. Comp. 19 (1997) 139.
196. Idem., in Proc. 12th Annual Tech. Conf., American Society for Composites, October 1997, "Static and Fatigue Properties of Adhesive Joints in SRIM-SRIM Composites."
197. R. D. ADAMS andv. MALLICK, Adhesion 38 (1992) 199.
198. L. DORN and L. WEIPING, Int. J. Adhesion Adhesives 13 (1993) 21.
199. M. F. S. F. DE MOURA, J. P. M. GONÇALVES, A. T. MARQUES and P. M. S. T. DE CASTRO, J. Compos. Mater. 31 (1997) 1462.
200. J. P. M. GONÇALVES, M. F. S. F. DE MOURA, P. M. S. T. DE CASTRO and A. T. MARQUES, Eng. Comput.: Int. J. Comput-Aided Eng. Software 17 (2000) 28.
201. R. S. RAGHAVA, R. M. CADELL and G. S. YEH, J. Mater. Sci. 8 (1973) 225.
202. W. R. BROUGHTON, Shear Propertiesof Unidirectional Carbon Fiber Composites. Ph.D. Thesis, Darwin College, Cambridge.
203. G. W. WYCHERLEY, S. A. MESTAN and I. GRABOVAC, J. Test. Eval. 18 (1990) 203.
204. A. GUIU and M. E. R. SHANAHAN. J. Polym. Sci. Polym. Phys. 39 (2001) 2843.
205. E. M. KNOX, Marin Applications for Structural Adhesives, Ph.D. Thesis, Glasgow, University, Glasgow, UK, 1996.
206. P. T. REYNOLDS, J. Mater, Sci. Lett. 4 (1985) 1194.
207. D. MAVGIS and M. B ARQUINS, "Adhesion," edited by K. W. Allen (Elsevier, London, 1988) Vol. 12, p. 205.
208. C. DRAIL, A. ALLAT, G. MARTIN and P. TORDJEM AN, J. Adhesion 68 (1998) 203.
209. F. X. GIBERT, A. ALLAT, G. MARIN and C. DRAIL, J. Adhesion Sci. Technol. 13 (1999) 1029.
210. R. J. ROARK, "Roark's Formulas for Stressand Stram," 6th ed. (McGraw-Hill, New York, London, 1989).
211. A. J. KINLOCH, "Adhesion and Adhesives" (Chapman and Hall, London, Glasgow, 1994).
212. A. J. KINLOCH, Proc. Int. Mech. Eng. 211 (Part G) (1997) 307.
213. P. MOLITOR and T. YOUNG, Int. J. Adhesion Adhesives 22 (2002) 101.
214. S. BISTAC, M. F. VALLAT and J. SCHULTZ, ibid. 18 (1998) 365.
215. D. M. BREWIS, G. W. CRITLOW and C. A. CURTIS, ibid. 19 (1999) 253.
216. A. N. RIDER and D. R. ARNOTT, Ibid. 20 (2000) 209.
217. S. U. NING, R. I. MACKIE and W. J. HARVEY, ibid. 12 (1992) 85.
218. M. P. ZANNI-DEFFARGES and M. E. R. SHANAHAN, ibid. 13 (1993) 41.
219. R. E. DAVIS and P. A. FAY, in Proc. of the Adhesion'90, Cambridge, UK, The Plastics and Rubber Institute, 1990, p. 27/1-27/6; ISBN 1 871571 219.
220. R. A. GLEDHILL and A. J. KINLOCH, J. Adhesion 6 (1974) 315.
221. E. M. KNOX, Ph.D. Thesis, Glasgow University, Glasgow, UK, 1996.
222. P. A. FAY and A. M ADDISON, in Procs. of Structural Adhesives in Enginerring II (Butterworths Scientific, Bristol, UK, 1989) p. 112.
223. M. GETTINS and A. J. KINLOCH, J. Mater. Sci. 12 (1977) 2511.
224. D. A. TOD, R. W. ATKINS and S. J. SHAW, Int. J. Adhesion Adhesives 12 (1992) 159.
225. S. P. BHUNIYE and S. MAITI, Europ. Polym. J. 38 (2002) 195.
226. A. J. KINLOCH. J. Mater. Sci. 12 (1980) 2141.
227. M. BABIC. Int. J. Adhesion Adhesives 21 (2001) 11.
228. D. K. KOHLI, in Proc. of 10th Int. Eurepean Chapter Conference of the SAMPE 55 (1989) 239.
229. D. K. KOHLI, 39th International SAMPE Symposium, 11-14 April 1994.
230. International Standard: ISO 813-1986 (E).
231. K. BOND, Adhesive Age 33 (Part 2) (1996) 22.
232. L. KOVAVIC, Lepenie Kovov a Plastov, Praha, SNTL, 1980.
233. I. SKEIST (ed), "Handbook of Adhesives" (Chapman and Hall, New York, 1990).
234. Various Bae Internal Studies of Long Term Warm/Wet Test Pieces of Hexcel Redux 775, Hexcel Redux 308 A, Cytec FM 73 and 3M Co, AF 63-2 Adhesives.
235. D. DIXON, Prediction of Lap Shear and Peel Strength of Adhesive Bonds, and Update on Results of Accelerated Environmental Testing, Bae Sowerby Research Centre, Report No. 3S 13729, May 1997, p. 3.
236. J. COMYN, "Adhesion Science" (The Royal Society of Chemistry, UK, 1997).
237. P. A. COOPER and J. W. SAWYER, Report No. TP-1507, NASA, 1979.
238. M. Y. TSAI and J. MORTON. Int. J. Solids Struct. 31 (1994) 2537.
239. R. M. BARKER and F. HATT, AIAA 11 (1973) 1650.
240. W. C. CARPENTER, Int. J. Numer. Methods Eng. 6 (1973) 430.
241. Idem., ibid. 15 (1980) 1659.
242. W. C. CARPENTER and R. BARSOUM, J. Adhesion 30 (1989) 25.
243. B. N. RAO, Y. K. RAO and S. YADIGARI, Fibre Sci. Technol. 17 (1982) 77.
244. S. YADIGARI, C. P. REDDY and T. S. REDDY, Comput. Struct. 27 (1987) 445.
245. C. C. LIN and Y. S. LIN, Int. J. Solids Struct. 30 (1993) 1679.
246. J. N. REDDY and S. ROY, Int. J. Non-Linear Mech. 23 (1988) 97.
247. S. ROY and J. N. REDDY, Int. J. Numer. Methods Eng. 26 (1988) 2531.
248. P. C. PANDEY and S. NARASIMHAN, Comput. Struct. 79 (2001) 769.
249. U. EDLUND and A. KLARBRING, Comput. Methods Appl. Mech. Eng. 96 (1992) 329.
250. M. CHEIKH, P. COOREVITSA and A. LOREDO, Int. J. Adhesion Adhesives 21 (2001) 249.
251. A. J. KINLOCH, M. S. G. LITTLE and J. F. WATTS, Acta Mater. 48 (2000) 4543.
252. A. MAHOON, "Titanium Adherends in Durability of Structural Adhesives," edited by A. J. Kinloch (1983) p. 259.
253. A. MADDISON, in Proc. of the Structural Adhesives in Engineering V (Inst. of Materials, Bristol, UK, 1998) p. 68.
254. Y. WEITSMAN, J. Comp. Mater. 11 (1977) 378.
255. M. R. BOWDITCH, Int. J. Adhesion Adhesives 16 (1996) 73.
256. R. A. GLEDHILL and A. J. KINLOCH, J. Adhesion 6 (1914) 315.
257. M. P. ZANNI-DEFFARGES and M. E. R. SHANAHAN, Int. J. Adhesion Adhesives 15 (1995) 1520.
258. C. S. SMITH, "Design of Marine Structures in Composite Materials" (Applied Science, Amsterdam, Elsevier, 1990) Chap. 3, p. 99.
259. R. D. ADAMS, "Structural Adhesives in Engineering," C180/86, (I. Mech. E., London, 1986), p. 17.
260. A. D. CKOCOMBE, Int. J. Adhesion Adhesives 11 (1997) 229.
261. Y. M. XIE and G. P. STEVEN, Comput. Struct. 49 (1994) 885.
262. Idem., Eng. Comput. 11 (1994) 295.
263. I. U. OJALVO and H. L. EIDONOFF, AIAA J. 16 (1978) 204.
264. W. J. RENTON and J. R. VINSON, J. Adhesion 7 (1975) 175.
265. F. ERDOGAN and M. RATWANI, J. Comp. Mater. 5 (1971) 378.
266. R. C. GIVLER and R. B. PIPES, "Analysis of the 'Joggle-Lap' Joint for Automotive Applications," edited by K. T. Kedward (Joining of Composite Materials, Vol. ASTM STP 749, ASTM, 1985), p. 61.
267. M. OLIA and J. N. ROSSETTOS, Int. J. Solids Struct. 33 (1996) 2681.
268. J. N. ROSSETTOS, P. LIN and H. NAYEB-HASHEMI, J. Engng. Mater. Technol. 116 (1994) 533.
269. J. N. ROSSETTOS and E. ZANG, J. Appl. Mech. 60 (1993) 559.