A review of thermally assisted machining

Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007

Volumn , Issue , 2007, Pages 325-336

  Lei, Shuting ^a   Pfefferkorn, Frank ^b  

^a Kansas State University   (United States)

^b Wisconsin Electric Machines and Power Electronics Consortium   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING ZONE; LASER ASSISTED MACHINING (LAM); MATERIAL REMOVAL; THERMALLY ASSISTED MACHINING;

BRITTLENESS; CUTTING; HEATING; LASER APPLICATIONS; NUMERICAL METHODS; REMOVAL;

MACHINING;

EID: 37349115250     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/MSEC2007-31096     Document Type: Conference Paper

References (71)

1. Tilghman, B. C., 1889, US patent 416873.
2. Armitage, J. B., and Schmidt, A. O., 1949, "Influence of Steel Hardness in Face Milling," Transactions of ASME, 71, pp. 413-419.
3. Armstrong, E. T., Cosler, A. S., and Katz, E. F., 1951, "Machining of Heated Metals," ASME Transactions, 73, pp. 35-43.
4. Krabacher, E. J., and Merchant, M. E., 1951, "Basic Factors in Hot-Machining of Metals," ASME Transactions, 73(5), pp. 761-776.
5. Stauffer, R. N., 1977, "Breakthrough in Hot Machining," Manufacturing Engineering, 79(4), pp. 60-61.
6. Dickter, I. A., 1962, "Hot Machining," SME Technical Paper, MR62-61.
7. Rajagopal, S., 1982, "Laser-Assisted Machining of Tough Materials," Laser Focus, 18(3), pp. 49-54.
8. Rajagopal, S., Plankenhorn, D. J., and Hill, V. L., 1982, "Machining Aerospace Alloys with the Aid of a 15kw Laser," Journal of Applied Metalworking, 2(3), pp. 170-184.
9. Kitagawa, T., and Maekawa, K., 1990, "Plasma Hot Machining for New Engineering Materials," Wear, 139, pp. 251-267.
10. Kitagawa, T., Maekawa, K., and Kubo, A., 1988, "Plasma Hot Machining of High Hardness Metals," Bulletin of Japanese Society of Precision Engineering, 22(2), pp. 145-151.
11. Kozhura, L. M., and Osarenren, J. O., 1991, "The Optimization of Rotary Cutting Plasma Assisted Machining Conditions of Hard Coatings," International Journal of Production Research, 29(1), pp. 199-208.
12. Shin, Y. C., and Kim, J. N., 1996, "Plasma Enhanced Machining of Inconel 718," Proceedings of the Manufacturing Science and Engineering, Symposium on Advanced Machining and Finishing Processes of Ceramics, Composites and High Temperature Alloys, ASME IMECE, pp. 243-249.
13. Madhavulu, G., and Ahmed, B., 1994, "Hot Machining Process for Improved Metal Removal Rates in Turning Operations," Journal of Materials Processing Technology, 44(3-4), pp. 199-206.
14. Lopez De Lacalle, L. N., Sanchez, J. A., Lamikiz, A., and Celaya, A., 2004, "Plasma Assisted Milling of Heat-Resistant Superalloys," ASME Journal of Manufacturing Science and Engineering, 126(2), pp. 274-285.
15. Hinds, B. K., 1978, "Hot Machining: An Old Concept Becomes a Practical Reality," Production Engineering (London), 57(9), pp. 19-23.
16. Bass. M., Beck, D., and Copley, S. M., 1978, "Laser Assisted Machining," Fourth European Electro-Optics Conference, Utrecht, Netherlands, pp. 233-240.
17. Copley, S. M., 1983, "Laser Shaping of Materials," Lasers in Materials Processing, Proceedings of ASM conference, Los Angles, CA, Vol. 8301, pp. 82-86.
18. Copley, S. M., 1985, Handbook of High-Speed Machining Technology, Chapman and Hall, New York, Laser Applications.
19. Komanduri, R., Flom, D. G., and Lee, M., 1985, "Highlights of the DARPA Advanced Machining Research Program," Journal of Engineering for Industry, 107(11), pp. 325-335.
20. Tipnis, V. A., Ravignani, G. L., and Mantel, S. J., Jr., 1981, "Economic Feasibility of Laser Assisted Machining (Lam)," Manufacturing Engineering Transactions, pp. 547-552.
21. Skvarenina, S., and Shin, Y. C., 2006, "Laser-Assisted Machining of Compacted Graphite Iron with Micro structural Analysis," International Journal of Machine Tools & Manufacture, 46, pp. 7-17.
22. Anderson, M., and Shin, Y. C., 2006, " Laser-Assisted Machining of an Austenitic Stainless Steel: P550," Proceedings of the Institution of Mechanical Engineers, Part B (Journal of Engineering Manufacture), v 220, n B12, 2055-2067.
23. Shin, Y. C., Patwa, R., and Anderson, M., 2006, "Laser-Assisted Machining of Inconel 718 with an Economic Analysis," International Journal of Machine Tools & Manufacture, 46(14), pp. 1879-1891.
24. Dumitrescu, P., Koshy, P., Stenekes, J., and Elbestawi, M. A., 2006, "High-Power Diode Laser Assisted Turning of AISI D2 Tool Steel," International Journal of Machine Tools & Manufacture, 46(15), pp. 2009-2016.
25. König, W., and Wageman, A., 1991, "Fine Machining of Advanced Ceramics," P. Vincenzini, Proceedings of the 7th International Meeting on Modern Ceramics Technologies, Montecatini, Italy, pp. 2769-2783.
26. König, W., and Wagemann, A., 1993, "Machining of Ceramics Components: Process-Technological Potentials," S. Jahanmir, Proceedings of the International Conference on Machining of Advanced Materials, Gaithersburg, MD, NIST special Publication, v.847, pp. 3-16.
27. König, W., and Zaboklicki, A. K., 1993, "Laser-Assisted Hot Machining of Ceramics and Composite Materials," International Conference on Machining of Advanced Materials, Gaithersburg, MD, NIST special Publication, Vol. 847, pp. 455-463.
28. Westkämper, E., 1995, "Grinding Assisted by Nd:YAG Lasers," CIRP Annals, 44(1), pp. 317-320.
29. Week, M., and Kasperowski, S., 1997, "Integration of Lasers in Machine Tools for Hot Machining," Production Engineering (London), 4(1), pp. 35-38.
30. Lei, S., Shin, Y., and Incropera, F., 2000, "Deformation Mechanisms and Constitutive Modeling for Silicon Nitride Undergoing Laser-Assisted Machining," International Journal of Machine Tools and Manufacture, 40(15), pp. 2213-2233.
31. Lei, S., Shin, Y. C., and Incropera, F. P., 2001, "Experimental Investigation of Thermo-Mechanical Characteristics in Laser Assisted Machining of Silicon Nitride Ceramics," ASME Journal of Manufacturing Science and Engineering, 123, pp. 639-646.
32. Rebro, P. A., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., 2002, "Comparative Assessment of Laser-Assisted Machining for Various Ceramics," Transactions of NAMRI/SME, 30, pp. 153-160.
33. Rebro, P A., Shin, Y. C., and Incropera, F. P., 2002, "Laser-Assisted Machining of Reaction Sintered Mullite Ceramics," ASME Journal of Manufacturing Sciences and Engineering, 124(4), pp. 875-885.
34. Rozzi, J. C., 1997, "Experimental and Theoretical Evaluation of the Laser Assisted Machining of Ceramic Materials," Ph.D. thesis, Purdue University, West Lafayette, IN.
35. Rozzi, J. C., Incropera, F. P., and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: IiAssessment of Parametric Effects," International Journal of Heat and Mass Transfer, 43, pp. 1425-1437.
36. Rozzi, J. C., Krane, M. J. M., Incropera, F. P., and Shin, Y. C., 1995, "Numerical Prediction of Three-Dimensional Unsteady Temperatures in a Rotating Cylindrical Workpiece Subjected to Localized Heating by a Translating Laser Source," Proceedings of the International Mechanical Engineering Conference and Exposition, Vol. HTD-317-2, San Francisco, California, pp. 399-411.
37. Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 2000, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Silicon Nitride: I-Comparison of Predictions with Measured Surface Temperature Histories," International Journal of Heat and Mass Transfer, 43, pp. 1409-1424.
38. Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 2005, "Heat Transfer Model of Semi-Transparent Ceramics Undergoing Laser-Assisted Machining," International Journal of Heat and Mass Transfer, 48, pp. 1999-2012.
39. Pfefferkorn, F. E., Shin, Y. C., Incropera, F. P., and Tian, Y., 2004, "Laser-Assisted Machining of Magnesia-Partially-Stabilized Zirconia," ASME Journal of Manufacturing Sciences and Engineering, 126(1), pp. 42-51.
40. Jeon, Y., and Pfefferkorn, F. E., 2005, "Effect of Laser Preheating the Workpiece on Micro-End Milling of Metals," Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, 10p.
41. Wang, Y., Yang, L. J., and Wang, N. J., 2002, "An Investigation of Laser-Assisted Machining of Al2o3 Particle Reinforced Aluminum Matrix Composite," Journal of Materials Processing Technology, 129, pp. 268-272.
42. Rozzi, J. C., Pfefferkorn, F. E., Shin, Y. C., and Incropera, F. P., 2000, "Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics," ASME Journal of Manufacturing Science and Engineering, 122(4), pp. 666-670.
43. Chryssolouris, G., Anifantis, N., and Karagiannis, S., 1997, "Laser Assisted Machining: An Overview," ASME Journal of Manufacturing Science and Engineering, 119, pp. 766-769.
44. Xu, H. H. K., Jahanmir, S., and Ives, K., 1996, "Material Removal and Damage Formation Mechanisms in Grinding Silicon Nitride," Journal of Materials Research, 11(7), pp. 1717-1724.
45. Vali, A., Longuemard, J. P., Marot, G., and Litwin, J., 1999, "Residual Stress Conditions in Laser-Assisted Machining," Welding International, 13(4), pp. 296-299.
46. Klocke, F., and Bergs, T., 1997, "Laser-Assisted Turning of Advanced Ceramics," Proceedings of SPIE: Rapid Prototyping and Flexible Manufacturing, 3102, pp. 120-130.
47. Patten, J., and Dong, L., 2007, "Laser Heating and Thermally Enhanced Deformation of Silicon," Proceedings of the International Conference on Manufacturing Science and Engineering, Atlanta, GA, Oct. 15-18, 2007.
48. Gutierrez, G., and Araya, J. G., 2004, "Analytical Solution for a Transient Three-Dimensional Temperature Distribution in Laser Assisted Machining Processes," Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, Vol. 3, pp. 1055-1063.
49. Rozzi, J. C., Incropera, F. P., and Shin, Y. C., 1997, "Transient, Three-Dimensional Heat Transfer Model for the Laser Assisted Machining of Ceramic Materials," 1997 ASME International Mechanical Engineering Conference and Exposition, Dallas, TX, HTD, Vol. 351, pp. 75-85.
50. Rozzi, J. C., Incropera, F. P., and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: Ii-Parametric Effects and Assessment of a Simplified Model," ASME Journal of Heat Transfer, 120(4), pp. 907-915.
51. Rozzi, J. C., Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 1998, "Transient Thermal Response of a Rotating Cylindrical Silicon Nitride Workpiece Subjected to a Translating Laser Heat Source: I-Comparison of Surface Temperature Measurements with Theoretical Results," ASME Journal of Heat Transfer, 120(4), pp. 899-906.
52. Pfefferkorn, F. E., Rozzi, J. C., Incropera, F. P., and Shin, Y. C., 1997, "Surface Temperature Measurement in Laser-Assisted Machining Processes," Experimental Heat Transfer, 10(4), pp. 291-313.
53. Pfefferkorn, F. E., Incropera, F. P., and Shin, Y. C., 2003, "Surface Temperature Measurement of Semi-Transparent Ceramics by Long-Wave length Pyrometry," ASME Journal of Heat Transfer, 125(1), pp. 48-56.
54. Tian, Y., and Shin, Y. C., 2006, "Thermal Modeling for Laser-Assisted Machining of Silicon Nitride Ceramics with Complex Features," ASME Journal of Manufacturing Science & Engineering, 128, pp. 425-434.
55. Tian, Y., Wu, B., and Shin, Y. C., 2006, "Laser-Assisted Milling of Silicon Nitride Ceramics," Proceedings of the 2006 ASME International Conference on Manufacturing Science and Engineering, 7p.
56. Lei, S., and Yang, B., 2005, "Distinct Element Simulation of Ceramic Machining: Material Removal Mechanism," Transactions of NAMRI, 33, pp. 485-492.
57. Shen, X., and Lei, S., 2005, "Distinct Element Simulation of Laser Assisted Machining of Silicon Nitride Ceramics," Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, 8p.
58. Tian, Y., and Shin, Y. C., In Press, "Thermal Modeling and Experimental Evaluation of Laser-Assisted Dressing of Superabrasive Grinding Wheels," Journal of Engineering Manufacture.
59. Shen, X., Liu, W. J., and Lei, S., 2005, "Three-Dimensional Thermal Analysis for Laser Assisted Milling of Silicon Nitride Ceramics Using FEA," Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, 8p.
60. Yang, B., Deines, T.W., Geist, CM., and Lei, S., 2007, "An Experimental Study of Laser Assisted Milling of Silicon Nitride Ceramics," Transactions of NAMRI, 35, in press.
61. Singh, R., and Melkote, S. N., 2005, "Experimental Characterization of Laser-Assisted Mechanical Micromachining (LAMM) Process," Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, 8p.
62. Singh, R., Alberts, M. J., and Melkote, S. N., 2006, " Characterization of Heat Affected Zone in a Laser-Assisted Mechanical Micromachining (LAMM) Process for Difficult-to-Machine Materials," Proceedings of the 1st International Conference on Micromanufacturing, Sep. 13-15, Urbana, IL, pp. 146-151.
63. Jen, T. C., Chen, Y. M., and Tuchowski, F., 2004, "Experimental and Numerical Studies of Laser-Assisted Drilling Processes," Proceedings of the ASME Heat Transfer/Fluids Engineering Summer Conference 2004, HT/FED 2004, Vol. 3, pp. 1015-1023.
64. Marinescu, I. D., 1998, "Laser-Assisted Grinding of Ceramics," Interceram, 47(5), pp. 314-316.
65. Zhang, C., and Shin, Y. C., 2002, "A Novel Laser-Assisted Turing and Dressing Technique for Vitrified CBN Wheels," International Journal of Machine Tools & Manufacture, 42, pp. 835.
66. Tian, Y., and Shin, Y. C., 2007, "Laser-Assisted Burnishing," International Journal of Machine Tools & Manufacture, 47(1), pp. 14-22.
67. Pfefferkorn, F. E., and Lei, S., 2006, "A New Metric for Defining the Efficiency of Thermally-Assisted Machining," Proceedings of MSEC2006, 2006 ASME International Conference on Manufacturing Science and Engineering, 8p.
68. Tian, Y., and Shin, Y. C., 2006, "Laser-Assisted Machining of Silicon Nitride with Compelx Geometric Features Via in-Process Control," Journal of American Ceramic Society, 89(11), pp. 3397-3405.
69. Klocke, F., Markworth, L., and Borsdorf, R., 2001, "High Performance Machining of Aerospace Materials," Proceedings of International Conference on Competitive Manufacturing, pp. 281-288.
70. Hügel, H., Wiedermaier, M., and Rudlaff, T., 1995, "Laser Processing Integrated into Machine Tools - Design, Application, Economy," Optical and Quantum Electronics, 27( 12), pp. 1149-1164.
71. Tian, Y. 2006, Laser-assisted machining of silicon nitride with complex features, Ph.D. dissertation, Purdue University.