Distinct element simulation of ceramic machining: Material removal mechanism

Transactions of the North American Manufacturing Research Institute of SME

Volumn 33, Issue , 2005, Pages 485-492

  Lei, Shuting ^a   Yang, Budong ^a  

^a Kansas State University   (United States)

Author keywords

Ceramic machining; Crack formation; Distinct element simulation; Material damping; Material removal mechanism

Indexed keywords

CERAMIC MACHINING; DISTINCT ELEMENT SIMULATION; MATERIAL DAMPING;

CERAMIC MATERIALS; CRACKS; MATHEMATICAL MODELS; SILICON NITRIDE;

MACHINING;

EID: 32944456650     PISSN: 10473025     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (34)

1. Adams, R.D., Flitcroft, J.E., Hancox, N.L., and Reynolds, W.N., 1973, "Effects of Shear Damage on the Torsional Behavior of Carbon Fiber Reinforcement Plastics", Journal of Composite Materials, Vol.7, pp. 68-75.
2. Ahn, Y., Farris T.N., and Chandrasekar, S., 1993, "Elastic Stress Fields Caused by Sliding Microindentation of Brittle Materials', In Machining of Advanced Materials, NIST SP 847 (ed.) S. Jahanmir, pp.71-81.
3. Cao, Y., 2001, "Failure Analysis of Exit Edges in Ceramic Machining Using Finite Element Analysis", Engineering Failure Analysis, Vol.8, pp. 325-338.
4. Chandrasekar, S., and Farris, T.N., 1997, "Machining and Surface Finishing of Brittle solids", Sadhana - Academy Proceedings in Engineering Sciences, Vol. 22, No. pt 3, pp. 473-481.
5. Chiu, W.-C, Endres, W.J., and Thouless, M.D., 2001, "An Analysis of Surface Cracking During Orthogonal Machining of Glass", Machining Science and Technology, Vol.5, No.2, pp.195-215.
6. Hazzard, J.F., and Young, R.P., 2000, "Micromechanical Modeling of Cracking and Failure in Brittle Rocks", Journal of Geophysical Research, Vol.105, No.B7, pp. 16683-16697.
7. Huang, H. Y., 1999, Discrete Element Modeling of Tool-rock Interaction, Ph.D. Thesis, University of Minnesota, Minneapolis, Minnesota, USA.
8. 2D (Particle Flow Code in 2 Dimension), Version 3.0. Minneapolis, Minnesota: ICG.
9. Jahanmir, S., Strakna, T.J. Quinn, G.D. Liang, H., Allor, R.L., and West, R.D., 1993a, "Effect of Grinding on Strength and Surface Integrity of Silicon Nitride: part I", NIST Special Publication, n 847, pp 263-277.
10. Jahanmir, S., Strakna, T.J. Quinn, G.D. Liang, H., Allor, R.L., and West, R.D., 1993b, "Effect of Grinding on Strength and Surface Integrity of Silicon Nitride: part II", NIST Special Publication, n 847, pp 279-291.
11. Kaitkay, P., 2002, Modeling of Rock Cutting Using Distinct Element Method, Master Thesis, Kansas State University, Manhattan, Kansas, USA.
12. Kumbera T. G., Cherukuri H. P., Patten J. A., Brand C. J., and Marusich T. D., 2001, "Numerical Simulations of Ductile Machining of Silicon Nitride with a Cutting Tool of Defined Geometry", Machining Science and Technology, Vol.5 No.3, pp.341-352.
13. nd ed. Cambridge University press, Cambridge, U.K.
14. Lei, S. (2003), "Distinct Element Modeling of Laser Assisted Machining of Silicon Nitride Ceramics", in Reddy, R.G. (Ed.), NSF Design, Service and Manufacturing Grantees and Research Conference Proceedings, pp. 1270-1281.
15. Lei, S., and Kaitkay, P., 2002, "Micromechanical Modeling of Rock Cutting Under Pressure Boundary Conditions Using Distinct Element Methods", Transactions of the North American Manufacturing Research Institution of SME, Vol 30, pp. 207-214.
16. Maksoud, T.M.A., Mokbel, A.A., and Morgan, J.E., 1999, "Evaluation of Surface and Sub-surface Cracks of Ground Ceramic", Journal of Materials Processing Technology, Vol 88, n 1, pp 222-243.
17. Mantena, R., Gibson, R.F., and Place, T.A., 1986, "Damping Capacity Measurements of Degradation in Advanced Materials", SAMPE Quarterly, Vol. 17, No.3, pp.20-31.
18. Marshall, D. B., Evans, A. G., Khuri-Yakub, B.T., Tien, J.W., and Kino, G.S., 1983, "The Nature of Machining Damage in Brittle Materials", Proceedings of The Royal Society of London, Series A: Mathematical and Physical Sciences, Vol.385, No. 1789, pp. 461-475.
19. Pezzotti, G., Ota, K., and Kleeb, H.-J., 1996, "Grain-Boundary Relaxation in High-Purity Silicon Nitride", Journal of the American Ceramic Society, Vol. 79, No. 9, pp. 2237-2246.
20. Pezzotti, G., Ota, K., and Yamamoto, Y., 2003, "Element Mechanics Behind the High-Temperature Deformation Behavior of Lutetium-Doped Silicon Nitride", Journal of the American Ceramics Society, Vol. 86, No 3, pp. 471-474.
21. Potyondy, D. O., and Cundall, P. A., 1999, "Modeling of Notch Formation in the URL Mine-By Tunnel: Phase IV - Enhancements to the PFC Model of Rock", Itasca Consulting Group, Inc., Report to Atomic Energy of Canada Limited (AECL), April. Issued as Ontario Hydro Nuclear Waste Management Division Report No. 06819-REP-01200-10002-R00.
22. Potyondy, D. O., and Cundall, P. A., 2003, "A Bonded-particle Model for Crystalline Rock", submitted to International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts.
23. Roebben, G., Duan, R.G., Sciti, D., and Van der Biest, O., 2002, "Assessments of the High Temperature Elastic and Damping Properties of Silicon Nitride and Carbides with the Impulse Excitation Technique", Journal of the European Ceramic Society, Vol. 22, pp. 2501-2509.
24. Roebben, G., and Van der Biest, O., 2000, "Elastic and Anelastic Properties of Silicon Nitride at High Temperatures by Non-Destructive Impulse Excitation", Materials Science Forum, Vol. 325-326, pp. 167-172.
25. Sims, G.D., Dean, G.D., Read, B.E., and Western, B.C., 1977, "Assessment of Damage in GRP Laminates by Stress Wave Emission and Dynamic Mechanical Measurements", Journal of Materials Science, Vol. 12, pp.2329-2342.
26. Ueda, K., Sugita, T., and Hiraga, H., 1991, "J-integral approach to material removal mechanisms in microcutting of ceramics", CIRP Annals, Manufacturing Technology, v 40, n 1, pp. 61-64.
27. Ueda, K., Sugita, T., and Tsuwa, H., 1983, "Application of Fracture Mechanics in Microcutting of Engineering Ceramics", Annals of the CIRP, Vol 32 n 1, pp83-86.
28. Xu, H.H.K., and Jahanmir, S., 1995a, "Effect of microstructure on abrasive machining of ceramics", Ceramic engineering and science proceedings, v16 n1, p295-314.
29. Xu, H.H.K., Jahanmir, S., and Ives, K., 1996, "Material Removal and Damage Formation Mechanisms in Grinding Silicon Nitride", Journal of Materials research, Vol. 11, No. 7, PP. 1717-1724.
30. Xu, H.H.K., Padture, Nitin P., and Jahanmir, S., 1995b, "Effect of microstructure on material-removal mechanisms and damage tolerance in abrasive machining of silicon carbide", Journal of the American Ceramic Society, Vol.78, No.9, pp. 2443-2448.
31. Yang, B. D., Jiao, Y., and Lei, S., 2003, "A Study on the Effects of Microparameters on Macroproperties for Specimens Created by Bonded Particles", submitted to Engineering Computations.
32. Yang, S., and Gibson, R. F., 1994, "Dynamic Mechanical Properties of Ceramics and Ceramic Composites at Elevated Temperatures", Materials for Noise and Vibration Control, NCA-Vol.18/DE-Vol. 80, pp. 43-51.
33. Zhang, G.M., Anand, D.K., Ghosh, S., and Ko, W.F., 1993, "Study of the Formation of Macro- and Microcracks During Machining of Ceramics", NIST Special Publication, n 847, pp. 465-478.
34. Zhang, G.M., Cao, Y., and Rekow, D., 2000, "A Computational Approach to Evaluate Surface Integrity of Glass Ceramics", Transactions of NAMRI/SME, Vol.28, PP.279-284.