Fracture strength of all-ceramic posterior inlay-retained fixed partial dentures

Dental Materials

Volumn 23, Issue 12, 2007, Pages 1513-1520

  Wolfart, Stefan ^a   Ludwig, Klaus ^a   Uphaus, Anja ^b   Kern, Matthias ^a  

^a UNIVERSITY OF KIEL   (Germany)

^b Privat Praxis   (Germany)

Author keywords

All ceramic restoration; FPD; Fracture load; Glass ceramic; Inlay retained; YPSZ; Zirconia ceramic

Indexed keywords

CERAMIC COATINGS; FRACTURE TOUGHNESS; GLASS CERAMICS; LITHIUM; RESINS; YTTRIUM OXIDE;

FRACTURE LOAD; HEAT-PRESSED LITHIUM-DISILICATE; INLAY-RETAINED; ZIRCONIA CERAMIC;

DENTAL PROSTHESES;

GLASS CERAMICS; LITHIUM DERIVATIVE; RESIN CEMENT; UNCLASSIFIED DRUG; YTTRIA STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIA-STABILIZED TETRAGONAL ZIRCONIA POLYCRYSTALS CERAMIC; YTTRIUM;

ARTICLE; CERAMICS; CHEMISTRY; COMPARATIVE STUDY; COMPUTER AIDED DESIGN; DENTAL CARE; DENTAL SURGERY; DENTURE; MASTICATION; MATERIALS TESTING; MOLAR TOOTH; TOOTH PROSTHESIS;

BITE FORCE; CERAMICS; COMPUTER-AIDED DESIGN; DENTAL MODELS; DENTAL PORCELAIN; DENTAL STRESS ANALYSIS; DENTURE DESIGN; DENTURE RETENTION; DENTURE, PARTIAL, FIXED; INLAYS; LITHIUM COMPOUNDS; MATERIALS TESTING; MOLAR; RESIN CEMENTS; YTTRIUM;

EID: 35548931084     PISSN: 01095641     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.dental.2006.12.006     Document Type: Article

References (45)

1. Kelly J.R., Nishimura I., and Campbell S.D. Ceramics in dentistry: historical roots and current perspectives. J Prosthet Dent 75 (1996) 18-32
2. Beham G. IPS-Empress. A new ceramic technology. Ivoclar-Vivadent Rep 6 (1990) 3-15
3. Kern M., Knode H., and Strub J.R. The all-porcelain, resin-bonded bridge. Quintessence Int 22 (1991) 257-262
4. Andersson M., and Odén A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand 51 (1993) 59-64
5. Sjölin R., Sundh A., and Bergman M. The Decim system for the production of dental restorations. Int J Computerized Dent 2 (1999) 197-207
6. Christel P., Meunier A., Heller M., Torre J.P., and Peille C.N. Mechanical properties and short-term in vivo evaluation of yttrium-oxide-partially stabilized zirconia. J Biomed Mater Res 23 (1989) 45-61
7. Tinschert J., Natt G., Mautsch W., Augthun M., and Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconia- based three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 14 (2001) 231-238
8. Sundh A., Molin M., and Sjogren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all-ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 21 (2005) 476-482
9. Kappert H.F. Dental materials: new ceramic systems. Trans Acad Dent Mater 9 (1996) 180-199
10. Bergenholtz G., and Nyman S. Endodontic complications following periodontal and prosthetic treatment of patients with advanced periodontal disease. J Periodontol 55 (1984) 64-68
11. Edelhoff D., and Sorensen J.A. Tooth structure removal associated with various preparation designs for posterior teeth. J Prosthet Dent 22 (2002) 241-249
12. Edelhoff D., Spiekermann H., and Yildirim M. Metal-free inlay-retained fixed partial dentures. Quintessence Int 32 (2001) 269-281
13. Wolfart S., Bohlsen F., Wegner S.M., and Kern M. A Prospective Evaluation up to five years of All-Ceramic Crown-and Inlay-Retained FPDs. Int J Prosthodont 18 (2005) 497-505
14. Shillingburg H.T., Hobo S., Whitsett L.D., Jacobi R., and Brackett S.E. Fundamentals of fixed prosthodontics. 3rd ed. (1997), Quintessence, Chicago p. 77
15. Wichnalek N. A new wax duplication technique. Dent Labor 47 (1999) 11
16. Nyman S., and Lindhe J. Examination of patients with periodontal disease. In: Lindhe J., Karring T., and Lang N.P. (Eds). Clinical periodontology and implant dentistry. 4th ed. (2003), Blackwell Munksgaard, Oxford 409
17. Kern M., and Thompson V.P. Sandblasting and silica coating of a glass-infiltrated alumina ceramic: volume loss, morphology, and changes in the surface composition. J Prosthet Dent 71 (1994) 453-461
18. Quaas AC, Yang B, Kern M. Panavia F 2.0 bonding to contaminated zirconia ceramic after different cleaning procedures. Dent Mater 2006; e-published.
19. Yang B, Scharnberg M, Wolfart S, Quaas AC, Ludwig K, Adelung R, Kern M. Influence of contamination on bonding to zirconia ceramic. J Biomed Mater Res B: Appl Biomater 2006; e-published.
20. Kern M., and Wegner S.M. Bonding to zirconia ceramic: adhesion methods and their durability. Dent Mater 14 (1998) 64-71
21. Yildirim M., Fischer H., Marx R., and Edelhoff D. In vitro fracture resistance of implant-supported all-ceramic restorations. J Prosthet Dent 90 (2003) 325-331
22. Oh W., Gotzen N., and Anusavice K.J. Influence of connector design on fracture probability of ceramic fixed-partial dentures. J Dent Res 81 (2002) 623-627
23. Gibbs C.H., Mahan P.E., Mauderli A., Lundeen H.C., and Walsh E.K. Limits of human bite strength. J Prosthet Dent 56 (1986) 226-229
24. Gibbs C.H., Mahan P.E., Lundeen H.C., Brehnan K., Walsh E.K., and Holbrook W.B. Occlusal forces during chewing and swallowing as measured by sound transmission. J Prosthet Dent 46 (1981) 443-449
25. Helkimo E., Carlsson G.E., and Helkimo M. Bite force and state of dentition. Acta Odontol Scand 35 (1977) 297-303
26. Howell T.H., Fiorellini J.P., Paquette D.W., Offenbacher S., Giannobile W.V., and Lynch S.E. A phase I/II clinical trial to evaluate a combination of recombinant human platelet-derived growth factor-BB and recombinant human insulin-like growth factor-I in patients with periodontal disease. J Periodontol 68 (1997) 1186-1193
27. Linderholm H., and Wennstrom A. Isometric bite force and its relation to general muscle forge and body build. Acta Odontol Scand 28 (1970) 679-689
28. Waltimo A., and Könönen M. A novel bite force recorder and maximal isometric bite force values for healthy adults. Scand J Dent Res 101 (1993) 171-175
29. Körber K.H., and Ludwig K. The maximum biting force as a critical factor for fixed partial dentures. Dent Labor 31 (1983) 55-60
30. Castellani D., Baccetti T., Giovannoni A., and Bernardini U.D. Resistance to fracture of metal ceramic and all-ceramic crowns. Int J Prosthodont 7 (1994) 149-154
31. Fairhurst C.W., Lockwood P.E., Ringle R.D., and Twiggs S.W. Dynamic fatigue of feldspathic porcelain. Dent Mater 9 (1993) 269-273
32. Ribeiro C.C.C., Baratieri L.N., Perdiago J., Baratieri L.N., and Ritter A.V. A clinical, radiographic, and scanning electro microscopic evaluation of adhesive restorations on carious dentin in primary teeth. Quintessence Int 30 (1999) 591-599
33. Geis-Gerstorfer J., and Fäßler P. Evaluation of the endurance limit for fatigue cycling of dental ceramics. Dtsch Zahnärztl Z 54 (1999) 692-694
34. Sakaguchi R.L., Douglas W.H., DeLong R., and Pintado M.R. The wear of a posterior dental composite in an artificial mouth. a clinical correlation. Dent Mater 2 (1986) 235-240
35. Kern M., Strub J.R., and Lü X.-Y. Wear of composite resin veneering materials in a dual-axis chewing simulator. J Oral Rehabil 26 (1999) 372-378
36. Scherrer S.S., and de Rijk W.G. The fracture resistance of all-ceramic crowns on supporting structures with different elastic moduli. Int J Prosthodont 6 (1993) 462-467
37. Rosentritt M., Plein T., Kolbeck C., Behr M., and Handel G. In vitro fracture force and marginal adaptation of ceramic crowns fixed on natural and artificial teeth. Int J Prosthodont 13 (2000) 387-391
38. Kelly J.R., Tesk J.A., and Sorensen J.A. Failure of all-ceramic fixed partial dentures in vitro and in vivo: Analysis and modeling. J Dent Res 74 (1995) 1253-1258
39. Kappert H.F., Knode H., and Schultheiss R. Strength of the In-Ceram system under mechanical loads and thermocycling in artificial saliva. Dtsch Zahnärztl Z 46 (1991) 129-131
40. Kern M., Douglas W.H., Fechtig T., Strub J.R., and DeLong R. Fracture strength of all-porcelain, resin-bonded bridges after testing in an artificial oral environment. J Dent 21 (1993) 117-121
41. Koutayas S.O., Kern M., Ferraresso F., and Strub J.R. Influence of design and mode of loading on the fracture strength of all-ceramic resin-bonded fixed partial dentures. An in vitro study in a dual-axis chewing simulator. J Prosthet Dent 83 (2000) 540-547
42. Kon M., Ishikawa K., and Kuwayama N. Effects of zirconia addition on fracture toughness and bending strength of dental porcelains. Dent Mater J 9 (1990) 181-192
43. Seghi R.R., and Sorensen J.A. Relative flexural strength of six new ceramic materials. Int J Prosthodont 8 (1995) 239-246
44. Sailer I., Feher A., Filser F., Luthy H., Gauckler L.J., Scharer P., et al. Prospective clinical study of zirconia posterior fixed partial dentures: 3-year follow-up. Quintessence Int 37 (2006) 685-693
45. Raigrodski A.J., Chiche G.J., Potiket N., Hochstedler J.L., Mohamed S.E., Billiot S., et al. The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent 96 (2006) 237-244