Effect of light-curing method and cement activation mode on resin cement Knoop hardness: Basic science research

Journal of Prosthodontics

Volumn 16, Issue 6, 2007, Pages 480-484

  Tango, Rubens Nisie ^a   Sinhoreti, Mário Alexandre Coelho ^a,b   Correr, Américo Bortolazzo ^a   Correr Sobrinho, Lourenço ^a   Henriques, Guilherme Elias Peçanha ^a  

^a Department of Restorative Dentistry ^*

^b UNIVERSITY OF CAMPINAS   (Brazil)

Author keywords

Ceramic; Light transmission; Resin composite; Resin based cement

Indexed keywords

ACETONE; BIOMEDICAL AND DENTAL MATERIALS; ENFORCE SURE CURE; ENFORCE-SURE CURE; POLYMETHACRYLIC ACID DERIVATIVE; PRIME AND BOND 2.1; RESIN CEMENT; SILANE DERIVATIVE; UNCLASSIFIED DRUG;

ANIMAL; ARTICLE; CATTLE; CERAMICS; CHEMISTRY; DENTAL ACID ETCHING; DENTAL BONDING; DENTIN; DENTURE; HARDNESS; ILLUMINATION; INSTRUMENTATION; MATERIALS TESTING; MECHANICAL STRESS; RADIATION EXPOSURE; SURFACE PROPERTY; TEMPERATURE; TIME; TOOTH PROSTHESIS; ULTRASTRUCTURE;

ACETONE; ACID ETCHING, DENTAL; ANIMALS; CATTLE; CERAMICS; DENTAL BONDING; DENTAL MATERIALS; DENTAL PORCELAIN; DENTAL VENEERS; DENTIN; HARDNESS; LIGHTING; MATERIALS TESTING; POLYMETHACRYLIC ACIDS; RESIN CEMENTS; SILANES; STRESS, MECHANICAL; SURFACE PROPERTIES; TEMPERATURE; TIME FACTORS;

EID: 35348880414     PISSN: 1059941X     EISSN: 1532849X     Source Type: Journal    
DOI: 10.1111/j.1532-849X.2007.00234.x     Document Type: Article

References (40)

1. Groten M, Probster L : The influence of different cementation modes on the fracture resistence of feldspathic ceramic crowns. Int J Prosthodont 1997 10 : 169 177
2. Rosenstiel SF, Land MF, Crispin BJ : Dental luting agents: a review of the current literature. J Prosthet Dent 1998 80 : 280 301
3. Breeding LC, Dixon DL, Caughman WF : The curing potential of light-activated composite resin luting agents. J Prosthet Dent 1991 65 : 512 518
4. Chan KC, Boyer DB : Curing light-activated composite cement through porcelain. J Dent Res 1989 68 : 476 480
5. Uctasli S, Hasanreisoglu U, Wilson HJ : The attenuation of radiation by porcelain and its effect on polymerization of resin cements. J Oral Rehabil 1994 21 : 565 575
6. el-Mowafy OM, Rubo MH, el-Badrawy WA : Hardening of new resin cements cured through a ceramic inlay. Oper Dent 1999 24 : 38 44
7. Blackman R, Barghi N, Duke E : Influence of ceramic thickness on the polymerization of light-cured resin cement. J Prosthet Dent 1990 63 : 295 300
8. Vichi A, Ferrari M, Davidson CL : Influence of ceramic and cement thickness on the masking of various types of opaque posts. J Prosthet Dent 2000 83 : 412 417
9. Rasetto FH, Driscoll CF, von Fraunhofer JA : Effect of light source and time on the polymerization of resin cement through ceramic veneers. J Prosthodont 2001 10 : 133 139
10. Linden JJ, Swift EJ Jr., Boyer DB, et al : Photo-activation of resin cements through porcelain veneers. J Dent Res 1991 70 : 154 157
11. Strang R, McCrosson J, Muirhead GM, et al : The setting of visible-light-cured resins beneath etched porcelain veneers. Br Dent J 1987 163 : 149 151
12. Watts DC, Cash AJ : Analysis of optical transmission by 400-500 nm visible light into aesthetic dental biomaterials. J Dent 1994 22 : 112 117
13. Hasegawa EA, Boyer DB, Chan DC : Hardening of dual-cured cements under composite resin inlays. J Prosthet Dent 1991 66 : 187 192
14. Darr AH, Jacobsen PH : Conversion of dual cure luting cements. J Oral Rehabil 1995 22 : 43 47
15. Rueggeberg FA, Caughman WF, Curtis JW Jr. : Effect of light intensity and exposure duration on cure of resin composite. Oper Dent 1994 19 : 26 32
16. Halvorson RH, Erickson RL, Davidson CL : Energy dependent polymerization of resin-based composite. Dent Mater 2002 18 : 463 469
17. Braga RR, Cesar PF, Gonzaga CC : Mechanical properties of resin cements with different activation modes. J Oral Rehabil 2002 29 : 257 262
18. Witzel MF, Braga RR, Singer J de M, et al : Bond strength between polymer resin-based cement and porcelain-dentin surfaces: influence of polymerization mode and early cyclic loading. Int J Prosthodont 2003 16 : 145 149
19. Hofmann N, Hugo B, Schubert K, et al : Comparison between a plasma arc light source and conventional halogen curing units regarding flexural strength, modulus, and hardness of photoactivated resin composites. Clin Oral Investig 2000 4 : 140 147
20. Peutzfeldt A, Sahafi A, Asmussen E : Characterization of resin composites polymerized with plasma arc curing units. Dent Mater 2000 16 : 330 336
21. Jandt KD, Mills RW, Blackwell GB, et al : Depth of cure and compressive strength of dental composites cured with blue light emitting diodes (LEDs). Dent Mater 2000 16 : 41 47
22. Stahl F, Ashworth SH, Jandt KD, et al : Light-emitting diode (LED) polymerisation of dental composites: flexural properties and polymerisation potential. Biomaterials 2000 21 : 1379 1385
23. Kurachi C, Tuboy AM, Magalhães DV, et al : Hardness evaluation of a dental composite polymerized with experimental LED-based devices. Dent Mater 2001 17 : 309 315
24. Small BW : A review of devices used for photocuring resin-based composites. Gen Dent 2001 49 : 457 460
25. Ferracane JL : Correlation between hardness and degree of conversion during the setting reaction of unfilled dental restorative resins. Dent Mater 1985 1 : 11 14
26. Uhl A, Michaelis C, Mills RW, et al : The influence of storage and indenter load on the Knoop hardness of dental composites polymerized with LED and halogen technologies. Dent Mater 2004 20 : 21 28
27. Kramer N, Lohbauer U, Frankenberger R : Adhesive luting of indirect restorations. Am J Dent 2000 13 : 60D 76D
28. Peutzfeldt A : Dual-cure resin cements: in vitro wear and effect of quantity of remaining double bonds, filler volume, and light curing. Acta Odontol Scand 1995 53 : 29 34
29. Rueggeberg FA, Caughman WF : The influence of light exposure on polymerization of dual-cure resin cements. Oper Dent 1993 18 : 48 55
30. O'Keefe KL, Pease PL, Herrin HK : Variables affecting the spectral transmittance of light through porcelain veneer samples. J Prosthet Dent 1991 66 : 434 438
31. Barghi N, McAlister EH : LED and halogen lights: effect of ceramic thickness and shade on during luting resin. Compend Contin Educ Dent 2003 24 : 497 508
32. Blatz MB, Sadan A, Kern M : Resin-ceramic bonding: a review of the literature. J Prosthet Dent 2003 89 : 268 274
33. Warren K : An investigation into the microhardness of a light cured composite when cured through varying thicknesses of porcelain. J Oral Rehabil 1990 17 : 327 334
34. Foxton RM, Pereira PN, Nakajima M, et al : Effect of light source direction and restoration thickness on tensile strength of a dual-curable resin cement to copy-milled ceramic. Am J Dent 2003 16 : 129 134
35. Danesh G, Davids H, Reinhardt KJ, et al : Polymerisation characteristics of resin composites polymerised with different curing units. J Dent 2004 32 : 479 488
36. Deb S, Sehmi H : A comparative study of the properties of dental resin composites polymerized with plasma and halogen light. Dent Mater 2003 19 : 517 522
37. Moon HJ, Lee YK, Lim BS, et al : Effects of various light curing methods on the leachability of uncured substances and hardness of a composite resin. J Oral Rehabil 2004 31 : 258 264
38. Knezevic A, Tarle Z, Meniga A, et al : Photopolymerization of composite resins with plasma light. J Oral Rehabil 2002 29 : 782 786
39. Caldas DB, de Almeida JB, Correr-Sobrinho L, et al : Influence of curing tip distance on resin composite Knoop hardness number, using three different light curing units. Oper Dent 2003 28 : 315 320
40. Dietschi D, Marret N, Krejci I : Comparative efficiency of plasma and halogen light sources on composite micro-hardness in different curing conditions. Dent Mater 2003 19 : 493 500