Modeling gasoline spray-wall interactions and comparison to experimental data

SAE Technical Papers

Volumn , Issue , 2004, Pages

  Lindgren, Ronny ^a   Denbratt, Ingemar ^a  

^a CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

DROPS; GASOLINE; POWERTRAINS;

DIAMETER DISTRIBUTIONS; DROP SIZE DISTRIBUTION; ENGINE CONDITIONS; EXPERIMENTAL INVESTIGATIONS; SPRAY WALL IMPINGEMENT; TANGENTIAL DIRECTIONS; TANGENTIAL VELOCITY COMPONENT; VELOCITY COMPONENTS;

COMPUTATIONAL FLUID DYNAMICS;

EID: 85072437593     PISSN: 01487191     EISSN: 26883627     Source Type: Journal    
DOI: 10.4271/2004-01-3003     Document Type: Conference Paper

References (30)

1. FIRE Software and Manual, Version 7.3. AVL List GmbH, Graz, 2001.
2. Al-Roub, M., and Farrell P.V., Atomization of Thin Liquid Films by Droplet Impact. Atomization and Sprays, Vol. 7, No. 5, pp. 531-547, 1997. (Pubitemid 127668649)
3. Al-Roub, M., Farrell P.V., and Senda J., Near Wall Interaction in Spray Impingement. SAE Technical Paper Series, No. 960863, 1996.
4. Bai, C., and Gosman A.D., Development of Methodology for Spray Impingement Simulation. SAE Technical Paper Series, No. 950283, 1995.
5. Bai, C.X., Rusche H., and Gosman A.D., Modeling of Gasoline Spray Impingement. Atomization and Sprays, Vol. 12, pp. 1-27, 2002. (Pubitemid 34950954)
6. Coghe, A., Cossali G.E., and Marengo M.,. A First Study about Single Drop Impingement on Thin Liquid Film in a Low Laplace Number Range. ILASS Europe, 1995.
7. Cossali, G.E., Coghe A., and Marengo M., The Impact of a Single Drop on a Wetted Solid Surface. Experiments in Fluids, Vol. 22, pp. 463-472, 1997.
8. Cossali, G.E., Marengo M., and Santini M.,. Multiple Drop Impact on Heated Surface. 9th International Conference on Liquid Atomization and Spray Systems (ICLASS), Sorrento, Italy, 2003.
9. Cossali, G.E., Marengo M., Santini M., and W. J. Secondary Droplet Atomisation from Single Drop Impact on Heated Surfaces. ILASS-Europe, Zaragoza, 2002.
10. Drake, M.C., Fansler T.D., Solomon A.S., and Szekely G.A.J., Piston Fuel Films as a Source of Smoke and Hydrocarbon Emissions from a Wall-Controlled Spark-Ignited Direct-Injection Engine. SAE Technical Paper Series, No. 2003-01-0547, 2003.
11. Han, Z., Xu Z., and Trigui N., Spray/Wall Interaction Models for Multidimensional Engine Simulation. International Journal of Engine Research, Vol. 1, No. 1, pp. 127-146, 2000.
12. Kuhnke, D., Spray Wall Interaction Modelling by Dimensionless Data Analysis, Ph.D. Thesis accepted by, Fachbereich Mathematik, Technischen Universität Darmstadt, 2004.
13. Lindgren, R., and Denbratt I., Influence of Wall Properties on the Characteristics of a Gasoline Spray after Wall Impingement. SAE Technical Paper Series, No. 2004-01-1951, 2004.
14. Macklin, W.C., and Metaxas G.J., Splashing of Drops on Liquid Layers. Journal of Applied Physics, Vol. 47, No. 9, pp. 3963-3970, 1976.
15. Mundo, C., Sommerfeld M., and Tropea C.,. Experimental Studies of the Deposition and Splashing of Small Liquid Droplets Impinging on a Flat Surface. International Conference on Atomization and Spray Systems ICLASS, Rouen, France, 1994.
16. Mundo, C., Sommerfeld M., and Tropea C., Droplet-Wall Collisions-Experimental Studies of the Deformation and Breakup Process. International Journal of Multiphase Flow, Vol. 21, No. 2, pp. 151-173, 1995.
17. Mundo, C., Sommerfeld M., and Tropea C., On the Modeling of Liquid Sprays Impinging on Surfaces. Atomization and Sprays, Vol. 8, No. 6, pp. 625-652, 1998. (Pubitemid 128636230)
18. Naber, J.D., and Reitz R.D., Modeling Engine Spray/Wall Impingement. SAE Technical Paper Series, No. 880107, 1988.
19. Rioboo, R., Tropea C., and Marengo M., Outcomes from a Drop Impact on Solid Surfaces. Atomization and Sprays, Vol. 11, No. 2, pp. 155-165, 2001. (Pubitemid 34277945)
20. Roisman, I.V., Prunet-Foch B., Tropea C., and Vignes-Adler M., Multiple Drop Impact onto a Dry Solid Substrate. Journal of Colloid and Interface Science, Vol. 256, pp. 396-410, 2002. (Pubitemid 36268663)
21. Sandquist, H., Lindgren R., and Denbratt I., Sources of Hydrocarbon Emissions from a Direct Injection Stratified Charge Spark Ignition Engine. SAE Special Publications, Vol. 1547, No. 2000-01-1906, pp. 101-111, 2000.
22. Senda, J., and Fujimoto H., Multidimensional Modeling of Impinging Sprays on the Wall in Diesel Engines. American Society of Mechanical Engineers: Applied Mechanical Review, Vol. 52, No. 4, pp. 119-138, 1999.
23. Senda, J., Ohnishi M., Takahashi T., Fujimoto H., Utsunomiya A., and Wakatabe M., Measurement and Modeling on Wall Wetted Fuel Film Profile and Mixture Preparation in Intake Port of SI Engine. SAE Technical Paper Series, No. 1999-01-0798, 1999.
24. Sikalo, S., Marengo M., Tropea C., and Ganic E.N., Analysis of Impact of Droplets on Horizontal Surfaces. Experimental Thermal and Fluid Science, Vol. 25, pp. 503-510, 2002. (Pubitemid 34122646)
25. Sivakumar, D., and Tropea C., Splashing Impact of a Spray onto a Liquid Film. Physics of Fluids, Vol. 14, No. 12, 2002.
26. Stanton, D.W., and Rutland C.J., Modeling Fuel Film Formation and Wall Interaction in Diesel Engines. SAE Technical Paper Series, No. 960628, 1996.
27. Stevens, E., and Steeper R., Piston Wetting in an Optical DISI Engine: Fuel Films, Pool Fires, and Soot Generation. SAE Technical Paper Series, No. 2001-01-1203, 2001.
28. Tomoda, T., Kawauchi M., Kubota M., Nomura Y., and Senda J., Modeling of Wall Impinging Behaviour with a Fan Shaped Spray. SAE Technical Paper Series, No. 2003-01-1841, 2003.
29. Yarin, A.L., and Weiss D.A., Impact of Drops on Solid-Surfaces-Self- Similar Capillary Waves, and Splashing as a New-Type of Kinematic Discontinuity. Journal of Fluid Mechanics, Vol. 283, pp. 141-173, 1995. (Pubitemid 26467852)
30. Zhao, F., Lai M.-C., and Harrington D.L., A Review of Mixture Preparation and Combustion Control Strategies for Spark-Ignited Direct-Injected Gasoline Engines. SAE Technical Paper Series, No. 970627, 1997.