Thermo- and fluid dynamics characterization of spray cooling with pulsed sprays

Experimental Thermal and Fluid Science

Volumn 30, Issue 2, 2005, Pages 79-96

  Panao M R O ^a   Moreira, A L N ^a  

^a INSTITUTO SUPERIOR TÉCNICO   (Portugal)

Author keywords

[No Author keywords available]

Indexed keywords

EVAPORATION; HEAT FLUX; INTERFACES (MATERIALS); SPRAYING; THERMODYNAMICS;

FILM EVAPORATION REGIME; PHASE DOPPLER ANEMOMETER; SPRAY COOLING;

FLUID DYNAMICS;

FLUID DYNAMICS; HEAT FLUX; SPRAY;

EID: 27544474610     PISSN: 08941777     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.expthermflusci.2005.03.020     Document Type: Article

References (41)

1. G. Stiesch Modeling Engine Spray and Combustion Process 2003 Springer Verlag
2. J. Cowart, W. Cheng, Intake Valve Thermal Behavior During Steady-State and Transient Engine Operation, SAE Technical Papers, 1999-01-3643, 1999.
3. C. Arcoumanis, and J.-C. Chang Heat transfer between a heated plate and an impinging transient diesel spray Experiments in Fluids 16 1993 105 119
4. P. Cutter, Diesel Spray Characteristics, Spray/Wall Interaction and Heat Transfer, PhD thesis, Imperial College of Science, Technology and Medicine, University of London, 1996.
5. J.J.G. Martins, I.C. Finlay, Heat Transfer to Air-Ethanol and Air-Methanol Spray Flowing in Heated Ducts and Across Heated Intake Valves, SAE Technical Paper 900583, 1990.
6. J.J.G. Martins, I.C. Finlay, Fuel Preparation of Port-Injected Engines, SAE Technical Paper 920518, 1992.
7. A.C. Alkidas, Intake-Valve Temperature and the Factors Affecting it, SAE Technical Paper 971729, 1997.
8. M.R.O. Panão, and A.L.N. Moreira Experimental study of the flow regimes resulting from the impact of an intermittent gasoline spray Experiments in Fluids 37 2004 834 855
9. M.R. Panão, and A.L.N. Moreira Experimental characterization of an intermittent gasoline spray under cross-flow conditions Atomization and Sprays 15 2005 201 222
10. C.R. Ferguson Internal Combustion Engine/Applied Thermosciences 1986 Wiley New York
11. R.W. Tate, Some problems associated with the accurate representation of droplet size distributions, in: Proceedings of the 2nd International Conference on Liquid Atom. and Spray Systems, Madison, 1982.
12. I.V. Roisman, and C. Tropea Flux measurements in sprays using phase Doppler techniques Atomization and Sprays 11 2001 667 700
13. M. Saffman Automatic calibration of LDA measurement volume size Applied Optics 26 1987 2592 2597
14. L. Reichelt, U. Meingast, and U. Renz Calculating transient wall heat flux from measurements of surface temperature International Journal of Heat and Mass Transfer 45 2002 579 584
15. X.D. Chen, and S.K. Nguang The theoretical basis of heat flux sensor Journal of Applied Mathematics and Decision Sciences 7 1 2003 1 10
16. H. Loureiro, M.R.O. Panão, A.L.N. Moreira, Simultaneous measurements of droplet characteristics and surface thermal behaviour to study spray cooling with pulsed sprays, in: Proceedings of the 12th International Symposium on Application of Laser Techniques to Fluid Mechanics, Lisbon, 2004.
17. P.J. Shayler, M.J.F. Colechin, A. Scarisbrick, Heat Transfer Measurements in the Intake Port of a Spark Ignition Engine, SAE Technical Papers, 960273, 1996.
18. J.D. Naber, P.V. Farrell, Hydrodynamics of Droplet Impingement on a Heated Surface, SAE Technical Papers, 930919, 1993.
19. I.V. Roisman, L. Araneo, M. Marengo, C. Tropea, Evaluation of drop impingement models: Experimental and numerical analysis of a spray impact, in: Proceedings of the 15th Annual Conference on Atomization and Spray Systems, Toulouse, 1999.
20. C. Tropea, and I.V. Roisman Modeling of spray impact on solid surfaces Atomization and Sprays 10 2000 387 408
21. W. Jia, G. Aguillar, G.-X. Wang, and J. Stuart Nelson Heat transfer dynamics during cryogen spray cooling of substrate at different initial temperatures Physics in Medicine and Biology 49 2004 5295 5308
22. U. Meingast, M. Staudt, L. Reichelt, U. Renz, F.-A. Sommerhoff, Analysis of Spray/Wall Interaction under Diesel Engine Conditions, SAE Technical Paper, 2000-01-0272, 2000.
23. U. Meingast, L. Reichelt, U. Renz, Measuring transient wall heat flux under diesel engine conditions, in: 5th International Symposium on Diag. and Modeling of Comb. In IC Eng., Comodia, Nagoya, 2001, pp. 140-146.
24. M.R.O. Panão, A.L.N. Moreira, Flow characteristics of spray impingement in PFI injection systems, in: Proceedings of the 12th International Conference on Appl. of Laser Techn. to Fluid Mechanics, paper 33.4, Lisbon, Portugal, July 2004.
25. F.-Q. Zhao, M.-C. Lai, D.L. Harrington, The Spray Characteristics of Automative Port Fuel Injection-A Critical Review, SAE Technical Paper 950606, 1995.
26. G. Aguilar, G.-X. Wang, and J.S. Nelson Dynamic behavior of cryogen spray cooling: Effects of spurt duration and spray distance Lasers in Surgery and Medicine 32 2003 152 159
27. H. Auracher, and W. Marquardt Heat transfer characteristics and mechanisms along entire boiling curves under steady-state and transient conditions International Journal of Heat and Fluid Flow 25 2004 223 242
28. L. Le Moyne, F. Maroteaux, P. Guibert, and M. Murat Model and measure of flows at the intake of engines Journal of Physics III France 7 1997 1927 1940
29. J. Li Huang, T.F. Alger, R.D. Matthews, M.J. Hall, R.H. Stanglmaier, C.E. Roberts, W. Dai, and R.W. Anderson Liquid fuel impingement on in-cylinder as a source of hydrocarbon emissions from direct injection gasoline engines Journal of Engineering for Gas Turbines and Power 123 2001 659 668
30. S.J. Nukiyama The maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressure International Journal of Heat and Mass Transfer 9 1966 1419 1433
31. M.L. Sawyer, S.M. Jeter, and S.I. Abdel-Khalik A critical heat flux correlation for droplet impact cooling International Journal of Heat and Mass Transfer 40 1997 2123 2131
32. B. Richter, K. Dullenkopf, Investigation of secondary droplet characteristics produced during wall impact, in: Proceedings of the 12th International Symposium on Application of Laser Techniques to Fluid Mechanics, Lisbon, 2004.
33. S. Deb, and S.C. Yao Analysis on film boiling heat transfer of impacting sprays International Journal of Heat and Mass Transfer 32 1989 2099 2112
34. C. Arcoumanis, J.-C. Chang, Flow and Heat Transfer Characteristics of Impinging Transient Diesel Sprays, SAE Technical Paper, 940678, 1994.
35. A.A. Mills, and J.D. Fry Rate of evaporation of hydrocarbons from a hot surface: Nukiyama and Leidenfrost temperatures European Journal of Physics 3 1982 152 154
36. K.J. Choi, and S.C. Yao Mechanisms of film boiling heat transfer of normally impacting spray International Journal of Heat and Mass Transfer 30 1987 311 318
37. G.E. Cossali, M. Marengo, M. Santini, Multiple drop impact on heated surface, in: Proceedings of the 9th International Conference on Liquid Atom. and Spray Systems (ICLASS), Sorrento, 2003.
38. J.D. Bernardin, and I. Mudawar Film boiling heat transfer of droplet streams and sprays International Journal of Heat and Mass Transfer 40 1997 2579 2593
39. B.M. Pikkula, J.H. Torres, J.W. Tunnell, and B. Anvari Cryogen spray cooling: Effects of droplet size and spray density on heat removal Lasers in Surgery and Medicine 28 2001 103 112
40. B.M. Pikkula, J.W. Tunnell, D.W. Chang, and B. Anvari Effects of droplet velocity, diameter an film height on heat removal during cryogen spray cooling Annals of Biomedical Engineering 32 8 2004 1131 1140
41. J.W. Tunnell, J.H. Torres, and B. Anvari Methodology for estimation of time-dependent surface heat flux due to cryogen spray cooling Annals of Biomedical Engineering 30 2002 19 33