Mechanical and structural characterisation of completely degradable polylactic acid/calcium phosphate glass scaffolds

Biomaterials

Volumn 28, Issue 30, 2007, Pages 4429-4438

  Charles Harris, Montse ^a,b   del Valle, Sergio ^b   Hentges, Emilie ^b   Bleuet, Pierre ^c   Lacroix, Damien ^a,b   Planell, Josep A ^a,b  

^a INSTITUTE FOR BIOENGINEERING OF CATALONIA IBEC   (Spain)

^b UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

^c EUROPEAN SYNCHROTRON RADIATION FACILITY   (France)

Author keywords

Biodegradable glass; Finite element analysis; Mechanical test; Scaffold; Synchrotron X ray microtomography

Indexed keywords

CALCIUM PHOSPHATE; POLYESTERS; SOLUBILITY; TISSUE ENGINEERING;

BIODEGRADABLE GLASS; CALCIUM PHOSPHATE GLASS; POLYLACTIC ACID; SYNCHROTRON X RAY MICROTOMOGRAPHY;

GLASS;

CALCIUM PHOSPHATE; GLASS; POLYLACTIC ACID;

ARTICLE; BIODEGRADABLE IMPLANT; COMPRESSIVE STRENGTH; FINITE ELEMENT ANALYSIS; MICROPHOTOGRAPHY; POROSITY; PRIORITY JOURNAL; SYNCHROTRON; TENSILE STRENGTH; THREE DIMENSIONAL IMAGING; TISSUE ENGINEERING; YOUNG MODULUS;

BIOCOMPATIBLE MATERIALS; BIODEGRADATION, ENVIRONMENTAL; BIOMECHANICS; CALCIUM PHOSPHATES; COMPUTER SIMULATION; FINITE ELEMENT ANALYSIS; GLASS; LACTIC ACID; MATERIALS TESTING; MICROSCOPY, ELECTRON, SCANNING; POLYMERS; POROSITY; REPRODUCIBILITY OF RESULTS; SOLUBILITY; SYNCHROTRONS; TOMOGRAPHY; X-RAYS;

EID: 34547667115     PISSN: 01429612     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.biomaterials.2007.06.029     Document Type: Article

References (45)

1. Bonassar L.J., and Vacanti C.A. Tissue engineering: the first decade and beyond. J Cell Biochem Suppl 30-31 (1998) 297-303
2. Hutmacher D.W. Scaffolds in tissue engineering bone and cartilage. Biomaterials 21 (2000) 2529-2543
3. Langer R., and Vacanti J.P. Tissue engineering. Science 260 5110 (1993) 920-926
4. Wake M.C., Patrick Jr. C.W., and Mikos A.G. Pore morphology effects on the fibrovascular tissue growth in porous polymer substrates. Cell Transplant 3 4 (1994) 339-343
5. Sikavitsas V.I., Temenoff J.S., and Mikos A.G. Biomaterials and bone mechanotransduction. Biomaterials 22 19 (2001) 2581-2593
6. Zeltinger J., Sherwood J.K., Graham D.A., Mueller R., and Griffith L.G. Effect of pore size and void fraction on cellular adhesion, proliferation, and matrix deposition. Tissue Eng 7 5 (2001) 557-572
7. Marra K.G., Szem J.W., Kumta P.N., DiMilla P.A., and Weiss L.E. In vitro analysis of biodegradable polymer blend/hydroxyapatite composites for bone tissue engineering. J Biomed Mater Res 47 (1999) 324-335
8. Xiong Z., Yan Y., Wang S., Zhang R., and Zhang C. Fabrication of porous scaffolds for bone tissue engineering via low-temperature deposition. Scr Mater 46 (2002) 771-776
9. Hou Q., Grijpma D.W., and Feijen J. Porous polymeric structures for tissue engineering prepared by coagulation, compression moulding and salt leaching technique. Biomaterials 24 (2003) 1937-1947
10. Zhang R., and Ma P.X. Poly(a-Hydroxyl acids)/hydroxyapatite porous composites for bone tissue engineering. I. Preparation and morphology. J Biomed Mater Res 44 (1999) 446-455
11. ASTM D 1621-00 standard testing method for compressive properties of rigid cellular plastics 2000.
12. ASTM D695-96 standard testing method for compressive properties of rigid plastics 1996.
13. ASTM F451-99a standard specification for acrylic bone cement 1999.
14. Gauthier O., Khairoun I., Bosco J., Obadia L., Bourges X., Rau C., et al. Noninvasive bone replacement with a new injectable calcium phosphate biomaterial. J Biomed Mater Res 66A (2003) 47-54
15. Weiss P., Obadia L., Magne D., Bourges X., Rau C., Weitkamp T., et al. Synchrotron X-ray microtomography (on a micron scale) provides three-dimensional imaging representation of bone ingrowth in calcium phosphate biomaterials. Biomaterials 24 25 (2003) 4591-4601
16. Mastrogiacomo M., Komlev V.S., Hausard M., Peyrin F., Turquier F., Casari B.S., et al. Synchrotron radiation microtomography of bone engineered from bone marrow stromal cells. Tissue Eng 10 11/12 (2004) 1767-1774
17. Thurner P., Müller B., Raeber G., Sennhauser U., and Hubbell J.A. 3D morphology of cell cultures: a quantitative approach using micrometer synchrotron light tomography. Microscopy Res Tech 66 (2005) 289-298
18. Tuan H.S., and Hutmacher D.W. Application of micro CT and computation modeling in bone tissue engineering. Comput-Aid Des 37 (2005) 1151-1161
19. Rustichelli F., Romanzetti S., Dubini B., Girardin E., Raven C., Snigrev A., et al. Phase-contrast microtomography of thin biomaterials. J Mater Sci Mater Med 15 (2004) 1053-1057
20. 2 as solvent: structural characterization. J Biomed Mater Res 62 (2002) 89-98
21. Müller B., Beckmann F., Huser M., Maspero F.A., Székely G., Ruffieux K., et al. Non-destructive three-dimensional evaluation of polymer sponge by micro-tomography using synchrotron radiation. Biomolec Eng 19 (2002) 73-78
22. Navarro M., Ginebra M.P., and Planell J.A. Development and cell response of a new biodegradable composite scaffold for guided bone regeneration. J Mater Sci Mater Med 15 (2004) 417-420
23. Navarro M., Aparicio C., Charles-Harris M., Engel E., Ginebra M.P., and Planell J.A. Development of a biodegradable composite scaffold for bone tissue engineering: physicochemical, topographical, mechanical, degradation and biological properties. Adv Polym Sci 200 (2006) 209-231
24. Dieter G.E. Mechanical metallurgy. 2nd ed., International Student Edition (1981), McGraw-Hill
25. Charalambides M.N., Goh S.M., Lim L., and Williams J.G. The analysis of the frictional effect on stress-strain data from uniaxial compression of cheese. J Mater Sci 36 9 (2001) 2313-2321
26. Ashby M.F., Evans A., Fleck N.A., Gibson L.J., Hutchinson J.W., and Wadley H.N.G. Metal foams, a design guide. 1st ed (2000), Elsevier (USA), Oxford
27. Gibson L.J., and Ashby M.F. Cellular solids, structure and properties. 2nd ed (1997), Cambridge University Press, Cambridge
28. Somogyi A., Tucoulou G., Martinez-Criado G., Homs A., Cauzid J., Bleuet P., et al. ID22: a multitechnique hard X-ray microprobe beamline at the European Synchrotron Radiation Facility. J Synch Rad 12 (2005) 208-215
29. Natterer F., and Wübbeling F. Mathematical methods in image reconstruction (2001), Society for Industrial and Applied Mathematics, Philadelphia
30. Bleuet P., Boivin G., Roux J.-P., and Dabin Y. In-situ micro-tomography study of human bones under strain with synchrotron radiation. SPIE Devl X-ray Tomogr IV Denver 5535 (2004) 129-136
31. Lin A.S., Barrows T.H., Cartmell S.H., and Guldberg R.E. Microarchitectural and mechanical characterization of oriented porous polymer scaffolds. Biomaterials 24 3 (2003) 481-489
32. Gibson L.J., and Ashby M.F. Cellular solids, structure and properties. 2nd ed (1997), Cambridge University Press, Cambridge
33. Darling A.L., and Sun W. 3D microtomographic characterization of precision extruded poly-epsilon-caprolactone scaffolds. J Biomed Mater Res B 70 2 (2004) 311-317
34. Thomson R.C., Yaszemski M.J., Powers J.M., and Mikos A.G. Hydroxyapatite fiber reinforced poly(a-hydroxy ester) foams for bone regeneration. Biomaterials 19 (1998) 1935-1943
35. Wang Y.W., Wu Q., Chen J., and Chen G.Q. Evaluation of three-dimensional scaffolds made of blends of hydroxyapatite and poly(3-hydroxybutyrate-Co-3-hydroxyhexanoate) for bone reconstruction. Biomaterials 26 8 (2005) 899-904
36. Ma P.X., and Choi J. Biodegradable polymer scaffolds with well-defined interconnected spherical pore network. Tissue Eng 7 (2003) 23-33
37. Spaans C.J., Belgraver V.W., Rienstra O., de Groot J.H., Veth R.P.H., and Pennings A.J. Solvent-free fabrication of micro-porous polyurethane amide and polyurethane-urea scaffolds for repair and replacement of the knee-joint meniscus. Biomaterials 21 (2000) 2453-2460
38. Nam Y.S., Yoon J.J., and Park T.G. A novel fabrication method of macroporous biodegradable polymer scaffolds using gas foaming salt as a porogen additive. J Biomed Mater Res 53 1 (2000) 1-7
39. Murphy W.L., Kohn D.H., and Mooney D.J. Growth of continuous bonelike mineral within porous poly(lactide-co-glycolide) scaffolds in vitro. J Biomed Mater Res 50 1 (2000) 50-58
40. Charles-Harris M., Beussart A., Hentges E., and Planell J.A. Characterisation and study of the degradation of scaffolds for tissue engineering. IV Jornades de recerca en Enginyeria Biomedica (JEBC') 04 (2004) 241-245
41. Charles-Harris M., Navarro M., Engel E., Aparicio C., Ginebra M.P., and Planell J.A. Surface characterization of completely degradable composite scaffolds. J Mater Sci Mater Med 16 12 (2005) 1125-1130
42. Charles-Harris M., Navarro M., Engel E., Aparicio C., Ginebra M.P., and Planell J.A. Surface characterisation of completely degradable composite scaffolds. J Mater Sci Mater Med 16 (2005) 1125-1130
43. Jones J, Atwood R, Lee P, Non-destructive quantitative 3D analysis for selection of optimum scaffold pore networks. In: European conference on biomaterials 2005, Sorrento, Italy, T293-824.
44. Jee W.S.S. Integrated bone tissue physiology: anatomy and physiology. In: Cowin S.C. (Ed). Bone mechanics handbook (2001), CRC Press, Boca Raton, FL 1-1-1-68
45. Johnson E, Young P, Xuan VB, West T, Fureder R. A novel approach to the modelling and analysis of biomaterials. In: European conference on biomaterials 2005, Sorrento, Italy, T290-535.