Air-bearing effects on actuated thermal pole-dip protrusion for hard disk drives

Journal of Tribology

Volumn 129, Issue 3, 2007, Pages 570-578

  Juang, Jia Yang ^a   Bogy, David B ^a  

^a UNIVERSITY OF CALIFORNIA   (United States)

Author keywords

Active slider; Air bearing surface (ABS); Flying height control; Hard disk drives; Head disk interface (HDI); Pole tip protrusion

Indexed keywords

BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; HEAT CONDUCTION; HEAT TRANSFER; MATHEMATICAL MODELS; PRESSURE EFFECTS; TEMPERATURE MEASUREMENT; THREE DIMENSIONAL;

ACTUATED THERMAL POLE-DIP PROTRUSION; AIR-BEARING SURFACE (ABS); FLYING HEIGHT CONTROL; HARD DISK DRIVES; HEAD-DISK INTERFACE (HDI); THERMAL ACTUATION;

HARD DISK STORAGE;

BOUNDARY CONDITIONS; FINITE ELEMENT METHOD; HARD DISK STORAGE; HEAT CONDUCTION; HEAT TRANSFER; MATHEMATICAL MODELS; PRESSURE EFFECTS; TEMPERATURE MEASUREMENT; THREE DIMENSIONAL;

EID: 34547538852     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2736456     Document Type: Article

References (26)

1. Yeack-Scranton, C. E., Khanna, V. D., Etzold, K. F., and Praino, A. P., 1990, "An Active Slider for Practical Contact Recording," IEEE Trans. Magn., 26(5), pp. 2478-2483.
2. Kurita, M., and Suzuki, K., 2004, "Flying-Height Adjustment Technologies of Magnetic Head Sliders," IEEE Trans. Magn., 40(1), pp. 332-336.
3. Suzuki, K., Maeda, R., Chu, J., Kato, T., and Kurita, M., 2003, "An Active Head Slider Using a Piezoelectric Cantilever for In Situ Flying-Height Control," IEEE Trans. Magn., 39(2), pp. 826-831.
4. Tagawa, N., Kitamura, K.-I., and Mori, A., 2003, "Design and Fabrication of MEMS-Based Active Slider Using Double-Layered Composite PZT Thin Film in Hard Disk Drives," IEEE Trans. Magn., 39(2), pp. 926-931.
5. Su, L., Kurita, M., Xu, J., Kato, K., Adachi, K., and Miyake, Y., 2005, "Static and Dynamic Characteristics of Active-Head Sliders," Tribol. Int., 38(6-7), pp. 717-723.
6. Juang, J. Y, and Bogy, D. B., 2005, "Controlled-Flying Proximity Sliders for Head-Media Spacing Variation Suppression in Ultralow Flying Air Bearings," IEEE Trans. Magn., 41(10), pp. 3052-3054.
7. Juang, J. Y., and Bogy, D. B., 2006, "Nonlinear Compensator Design for Active Sliders to Suppress Head-Disk Spacing Modulation in Hard Disk Drive," Mechatronics, 11(3), pp. 256-264.
8. 3-TiC Slider With a Piezoelectric Nanoactuator," Proc. of ASME/JSME Joint Conference on Micromechatronics for Information and Precision Equipment (MIPE), Santa Clara, CA, June, ASME, New York.
9. Gupta, B. K., Young, K., Chilamakuri, S. K., and Menon, A. K., 2001, "On the Thermal Behavior of Giant Magnetoresistance Heads," ASME J. Tribol., 123(2), pp. 380-387.
10. Pust, L., Rea, C. J. T., and Gangopadhyay, S., 2002, "Thermo-Mechanical Head Performance," IEEE Trans. Magn., 38(1), pp. 101-106.
11. Yan, W, 2002, "Thermal Pole Tip Protrusion Finite Element Analysis of Thin Film Inductive Recording Heads," J. Appl. Phys., 91(10), pp. 7571-7573.
12. Wang, R. H., Wu, X. Z., Weresin, W, and Ju, Y. S., 2001, "Head Protrusion and Its Implications on Head-Disk Interface Reliability" IEEE Trans. Magn., 37(4), pp. 1842-1844.
13. Xu, J., Kurita, M., and Tokuyama, M., 2004, "Thermal Analysis of a Magnetic Head," IEEE Trans. Magn., 40(4), pp. 3142-3144.
14. Ju, Y. S., 2005, "Self-Heating in Thin-Film Magnetic Recording Heads Due to Write Currents," IEEE Trans. Magn., 41(12), pp. 4443-4448.
15. Aoki, K., Hoshino, T., Iwase, T., Imamura, T., and Aruga, K., 2005, "Thermal Pole-Tip Protrusion Analysis of Magnetic Heads for Hard Disk Drives," IEEE Trans. Magn., 41(10), pp. 3043-3045.
16. Nikitin, V., Gider, S., Tabib, J., Hsiao, D., Salo, M., Sui, G., Yuan, S., Satoh, N. A., Xu, J., and Maruyama, Y., 2004, "Spatial and Temporal Profiling of Protrusion in Magnetic Recording Heads," IEEE Trans. Magn., 40(1), pp. 326-331.
17. Jang, E., Wang, G., Cho, K. Y, and Lee, H., 2002, "Heating and Cooling Effect of Giant Magnetoresistive Heads During Writing Operations," J. Appl. Phys., 91(10), pp. 8769-8771.
18. Meyer, D. W., Kupinski, P. E., and Liu, J. C., 1999, "Slider With Temperature Responsive Transducer Positioning," U. S. Patent No. 5,991,113, Nov. 23.
19. Kurita, M., Shiramatsu, T., Miyake, K., Kato, A., Soga, M., Tanaka, H., Saegusa, S., and Suk, M., 2006, "Active Flying-Height Control Slider Using MEMS Thermal Actuator," Microsyst. Technol., 12(4), pp. 369-375.
20. 2," IEEE Trans. Magn., 42(2), pp. 241-246.
21. Yang, Y., Shojaeizadeh, S., Bain, J. A., Zhu, J. G., and Asheghi, M., 2004, "Detailed Modeling of Temperature Rise in Giant Magnetoresistive Sensor During an Electrostatic Discharge Event," J. Appl. Phys., 95(11), pp. 6780-6782.
22. Lee, S. M., and Cahill, D. G., 1995, "Thermal Conductivity of Sputtered Oxide Films," Phys. Rev. B, 52(1), pp. 253-257.
23. Chen, L., Bogy, D. B., and Strom, B., 2000, "Thermal Dependence of MR Signal on Slider Flying State," IEEE Trans. Magn., 36(5), pp. 2486-2489.
24. Juang, J. Y., Kubotera, H., and Bogy, D. B., 2006, "Effects of Track-Seeking Motion on the Flying Attitudes of Ultralow Flying Sliders," IEEE Trans. Magn., 42(10), pp. 2522-2524.
25. Juang, J. Y., and Bogy, D. B., 2006, "Design and Analysis of a Flying Height Control Slider With Thermal Nanoactuator," Technical Report No. 2006-004, Computer Mechanics Lab., Department of Mechanical Engineering, University of California, Berkeley.
26. Juang, J. Y., Bogy, D. B., and Bhatia, C. S., 2007, "Design and Dynamics of Flying Height Control Slider With Piezoelectric Nanoactuator in Hard Disk Drives," ASME J. Tribol., 129(1), pp. 161-170.