Extracting the plastic properties of metal materials from microindentation tests: Experimental comparison of recently published methods

Journal of Materials Research

Volumn 22, Issue 6, 2007, Pages 1512-1519

  Guelorget, Bruno ^a   François, Manuel ^a   Liu, Cheng ^b   Lu, Jian ^c  

^a UNIVERSITÉ DE TECHNOLOGIE DE TROYES   (France)

^b INSTITUTE OF PHYSICS   (China)

^c HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

ERROR ANALYSIS; EXTRACTION; INDENTATION; PLASTICITY; SENSITIVITY ANALYSIS; STRESS-STRAIN CURVES;

METAL MATERIALS; MICROINDENTATION; PLASTIC PROPERTIES;

METALS;

EID: 34347336610     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2007.0213     Document Type: Article

References (49)

1. D. Tabor: A simple theory of static and dynamic hardness, in Proc. R. Soc. 92, 247 (1948).
2. D. Tabor: Hardness of Metals (Cambridge University Press, Cambridge, UK, 1951).
3. N.A. Stilwell and D. Tabor: Elastic recovery of conical indentations, in Proc. Phys. Soc. LXXVIII, 169 (1961).
4. S.I. Bulychev, V.P. Alekhin, M.K. Shorshorov, A.P. Ternovskii, and G.D. Shnyrev: Determining Young's modulus from the indentor penetration diagram. Zovod. Lab. 41, 1137 (1975).
5. M.F. Doerner and W.D. Nix: A method for interpreting the data from depth-sensing indentation instruments. J. Mater. Res. 1, 601 (1986).
6. W.C. Oliver and G.M. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
7. K.W. Lee, Y.W. Chung, C.Y. Chan, I. Bello, S.T. Lee, A. Karimi, J. Patscheider, M.P. Delplancke-Ogletree, D. Yang, B. Boyce, and T. Buchheit: An international round-robin experiment to evaluate the consistency of nanoindentation hardness measurements of thin films. Surf. Coat. Technol. 168, 57 (2003).
8. T. Chudoba, N. Schwarzer, V. Linss, and F. Richter: Determination of mechanical properties of graded coatings using nanoindentation. Thin Solid Films 469-470, 239 (2005).
9. S. Chowdhury, M.T. Laugier, and I.Z. Rahman: Measurement of the mechanical properties of carbon nitride thin films from the nanoindentation loading curve. Diam. Relat. Mater. 13, 1543 (2004).
10. L.Y. Huang, J. Lu, and K.W. Xu: The nano-scratch behaviour of different diamond-like carbon-film substrate. Appl. Phys. 37, 2135 (2004).
11. 2 inter-layers pulsed laser deposition. Thin Solid Films 453-454, 208 (2004).
12. T. Roland, D. Retraint, K. Lu, and J. Lu: Fatigue life improvement through surface nanostructuring of stainless steel by means of residual mechanical attrition treatment. Scripta Mater. 54, 1949 (2006).
13. A.E. Giannakopoulos and S. Suresh: Determination of elastoplastic properties by instrumented sharp indentation. Scripta Mater. 40, 1191 (1999).
14. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
15. J.L. Bucaille, S. Stauss, E. Felder, and J. Michler: Determination of plastic properties of metals by instrumented indentation using different sharp indenters. Acta Mater. 51, 1663 (2003).
16. N. Chollacoop, M. Dao, and S. Suresh: Depth-sensing instrumented indentation with dual sharp indenters. Acta Mater. 51, 3713 (2003).
17. Y.P. Cao and J. Lu: A new method to extract the plastic properties of metal materials from an instrumented spherical indentation loading curve. Acta Mater. 52, 4023 (2004).
18. Y.P. Cao and J. Lu: Size dependent sharp indentation. II. A reverse algorithm to identify plastic properties of metallic materials. J. Mech. Phys. Solids 53, 49 (2005).
19. Y.P. Cao, X.Q. Qian, J. Lu, and Z.H. Yao: An energy-based method to extract plastic properties of metal materials from conical indentation tests. J. Mater. Res. 20, 1194 (2005).
20. N. Chollacoop and U. Ramamurty: Experimental assessment of the representative strains in instrumented sharp indentation. Scripta Mater. 53, 247 (2005).
21. N. Ogasawara, N. Chiba, and X. Chen: Measuring the plastic properties of bulk materials by single indentation test. Scripta Mater. 54, 65 (2006).
22. M. Zhao, N. Ogasawara, N. Chiba, and X. Chen: A new approach to measure the elastic-plastic properties of bulk materials using spherical indentation. Acta Mater. 54, 23 (2006).
23. M. Beghini, L. Bertini, and V. Fontanari: Evaluation of the stress-strain curve of metallic materials by spherical indentation. Int. J. Solids Struct. 43, 2441 (2006).
24. H. Pelletier: Predictive model to estimate the stress-strain curves of bulk metals using nanoindentation. Tribol. Int. 39, 593 (2006).
25. Y.T. Cheng and C.M. Cheng: Can stress-strain relationships be obtained from indentation curves using conical and pyramidal indenters? J. Mater. Res. 14, 3493 (1999).
26. K.K. Tho, S. Swaddiwudhipong, Z.S. Liu, K. Zeng, and J. Hua: Uniqueness of reverse analysis from conical indentation tests. J. Mater. Res. 19, 2498 (2004).
27. J. Alkorta, J.M. Martinéz-Esnoala, and J. Gil Sevillano: Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data. J. Mater. Res. 20, 432 (2005).
28. J. Alkorta, J.M. Martinéz-Esnoala, and J. Gil Sevillano: Erratum: "Absence of one-to-one correspondence between elastoplastic properties and sharp-indentation load-penetration data." J. Mater. Res. 20, 1369 (2005).
29. O. Casals and J. Alcalá: The duality in mechanical property extraction from Vickers and Berkovich instrumented indentation experiments. Acta Mater. 53, 3545 (2005).
30. N. Ogasawara, N. Chiba, and X. Chen: Representative strain of indentation analysis. J. Mater. Res. 20, 2225 (2005).
31. E. Tyulyukovskiy and N. Huber: Identification of viscoplastic material parameters from spherical indentation data: Part I. Neural networks. J. Mater. Res. 21, 664 (2006).
32. D. Klötzer, C. Ullner, E. Tyulyukovskiy, and N. Huber: Identification of viscoplastic material parameters from spherical indentation data: Part II. Experimental validation of the method. J. Mater. Res. 21, 677 (2006).
33. Y.P. Cao and J. Lu: Size dependent sharp indentation. I. A closed-form expression of the indentation loading curve. J. Mech. Phys. Solids 53, 33 (2005).
34. Y.P. Cao and J. Lu: Depth-sensing instrumented indentation with dual sharp indenters: Stability analysis and corresponding regularization schemes. Acta Mater. 52, 1143 (2004).
35. J-L. Loubet, M. Bauer, A. Tonck, S. Bec, and B. Gauthier-Manuel: Nanoindentation with a Surface Force Apparatus (Kluwer Academic Publishers, Dordrecht, The Netherlands, 1993), pp 429 and 447.
36. G. Hochstetter, A. Jimenez, and J-L. Loubet: Strain-rate effects on hardness of glassy polymers in the nanoscale range. Comparison between quasi-static and continuous stiffness measurements. J. Macromol. Sci.-Phys. B38, 681 (1999).
37. N. Chollacoop and U. Ramamurty: Robustness of algorithms for extracting plastic properties from the instrumented sharp indentation data. Mater. Sci. Eng., A 423, 41 (2006).
38. Y.P. Cao and N. Huber: A further investigation on the definition of the representative strain in conical indentation. J. Mater. Res. 21, 1810 (2006).
39. N. Ogasawara, N. Chiba, and X. Chen: Erratum: "Representative strain of indentation analysis" [J. Mater. Res. 20, 2225 (2005)] and "Limit analysis-based approach to determine the material plastic properties with conical indentation". J. Mater. Res. 21, 2699 (2006). [J. Mater. Res. 21, 947 (2006)].
40. H. Pelletier, J. Krier, A. Cornet, and P. Mille: Limits of using bilinear stress-strain curve for finite element modeling of nanoindentation response on bulk materials. Thin Solid Films 379, 147 (2000).
41. J.M. Antunes, L.F. Menezes, and J.V. Fernandes: Three-dimensional numerical simulation of Vickers indentation tests. Int. J. Solids Struct. 43, 784 (2006).
42. B. Taljat and G.M. Pharr: Development of pile-up during spherical indentation of elastic-plastic solids. Int. J. Solids Struct. 41, 3891 (2004).
43. M. Mata and J. Alcalá: The role of friction on sharp indentation. J. Mech. Phys. Solids 52, 145 (2004).
44. H. Habbab, B.G. Mellor, and S. Syngellakis: Post-yield characterisation of metals with significant pile-up through spherical indentations. Acta Mater. 54, 1965 (2006).
45. D.L. Joslin and W.C. Oliver: A new method for analyzing data from continuous depth-sensing microindentation tests. J. Mater. Res. 5, 123 (1990).
46. M.S. Bobji and S.K. Biswas: Deconvolution of hardness data obtained from nanoindentation of rough surfaces. J. Mater. Res. 14, 2259 (1999).
47. M.R. Begley and J.W. Hutchinson: The mechanics of size-dependent indentation. J. Mech. Phys. Solids 46, 2049 (1998).
48. W.D. Nix and H. Gao: Indentation size effects in crystalline materials: A law for strain gradient plasticity. J. Mech. Phys. Solids 46, 411 (1998).
49. I. Manika and J. Maniks: Size effects in micro- and nanoscale indentation. Acta Mater. 54, 2049 (2006).