Identification of viscoplastic material parameters from spherical indentation data: Part I. Neural networks

Journal of Materials Research

Volumn 21, Issue 3, 2006, Pages 664-676

  Tyulyukovskiy, E ^a   Huber, Norbert ^a  

^a KARLSRUHE INSTITUTE OF TECHNOLOGY   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; ELASTIC MODULI; FEEDFORWARD NEURAL NETWORKS; FINITE ELEMENT METHOD; INDENTATION; INVERSE PROBLEMS; MATHEMATICAL MODELS; STRAIN HARDENING; STRAIN RATE; YIELD STRESS;

ARMSTRONG-FREDERICK HARDENING; ELASTIC DEFORMATION; FINITE ELEMENT SIMULATION; VISCOPLASTIC MATERIAL;

VISCOPLASTICITY;

EID: 33645104537     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2006.0076     Document Type: Article

References (33)

1. J. Field and M. Swain: A simple predictive model for spherical indentation. J. Mater. Res. 8, 297 (1993).
2. S. Jayaraman, G. Hahn, W. Oliver, and C. Rubin: Determination of monotonic stress strain curve of hard materials from ultra-low-load indentation tests. Int. J. Solids Struct. 35, 365 (1998).
3. S. Kucharski and Z. Mroz: Identification of hardening parameters of metals from spherical indentation tests. Trans. ASME H, J. Eng. Mater. Technol. 135, 245 (2001).
4. J-H. Ahn and D. Kwon: Derivation of plastic stress-strain relationship from ball indentations. J. Mater. Res. 16, 3170 (2001).
5. M. Dao, N. Chollacoop, K.J. Van Vliet, T.A. Venkatesh, and S. Suresh: Computational modeling of the forward and reverse problems in instrumented sharp indentation. Acta Mater. 49, 3899 (2001).
6. N. Huber, W. Nix, and H. Gao: Identification of elastic-plastic material parameters from pyramidal indentation of thin films. Proc. R. Soc. London, Ser. A 458, 1593 (2002).
7. A. Atkins and D. Tabor: Plastic indentation in metals with cones. J. Mech. Phys. Solids 13, 149 (1965).
8. D. Tabor: Hardness of Metals (Cambridge University Press, Cambridge, 1951).
9. M. Doemer and W. Nix: A method for interpreting the data from depth-sensing indentation. J. Mater. Res. 1, 601 (1986).
10. W. Oliver and G. Pharr: An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res. 7, 1564 (1992).
11. N. Huber, D. Muriz, and C. Tsakinakis: Determination of Young's modulus by spherical indentation. J. Mater. Res. 12, 2459 (1997).
12. H. Hertz: Über die Berührung fester elastischer Körper. J. Reine Angew. Math. 92, 156 (1882).
13. A. Love: Boussinesq's problem for a rigid cone. Quart. J. Math. 10, 161 (1939).
14. J. Harding and I. Sneddon: The elastic stresses produced by the indentation of the plane surface of a semi-infinite elastic solid by a rigid punch. Proc. Cambridge Philos. Soc. 43, 16 (1945).
15. ISO 14577, Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method; - Part 2: Verification and calibration of the testing machine; - Part 3: Calibration of reference test pieces, October 2003.
16. Ch. Ullner: Requirement of a robust method for the precise determination of the contact point in depth sensing hardness test. Measurement 27, 43 (2000).
17. Ch. Ullner: Development of the instrumented indentation test. J. Metrology Soc. India 20, 43 (2005).
18. N.M. Jennett, A.S. Maxwell, K. Lawrence, L.N. McCartney, R. Hunt, J. Koskinen, T. Muukkonen, F. Rossi, J. Meneve, W. Wegener, N. Gibson, Zhibui, Xu, A.J. Busliby, S. Brookes, A. Cavaleiro, K. Hermann, B. Bellaton, R. Consiglio, F. Augereau, O. Kolosov, D. Schneider, and T. Chudoba: European project INDICOAT SMT-CT98-2249, Final Report, Determination of Hardness and Modulus of Thin Films and Coatings by Nanoindentation, NPL Report MATC (A) 24 (2001).
19. ISO DIS 14577, Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings, October 2005.
20. E. Diegele, W. Jansohn, and C. Tsakmakis: Finite deformation plasticity and viscoplasticity laws exhibiting nonlinear hardening rules Part I: Constitutive theory and numerical integration. Comp. Mech. 25, 1 (2000).
21. E. Diegele, S. Hartmann, and C. Tsakmakis: Finite deformation plasticity and viscoplasticity laws exhibiting nonlinear hardening rules Part II: Representative examples. Comp. Mech, 25, 13 (2000).
22. K-D. Bouzakis, N. Michailidis, S. Hadjiyiannis, G. Skordaris, and G. Erkens: The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress-strain laws by nanoindentation. Mater. Charact. 49, 149 (2003).
23. N. Huber and C. Tsakmakis: Determination of constitutive properties from spherical indentation data using neural networks, Part I: The case of pure kinematic hardening in plasticity laws. J. Mech. Phys. Solids 47, 1569 (1999).
24. N. Huber and C. Tsakmakis: Determination of constitutive properties from spherical indentation data using neural networks, Part II: Plasticity with nonlinear isotropic and kinematic hardening. J. Mech. Phys, Solids 47, 1589 (1999).
25. M. Mayo and W. Nix: A micro-indentation study of superplasticity in Pb, Sn and Sn-38 wt% Pb. Acta Metall. 36, 2183 (1988).
26. V. Raman and R. Berriche: An investigation of the creep process in tin and aluminium using a depth-sensing indentation, technique. J. Mater. Res. 7, 627 (1992).
27. N. Huber and E. Tioulioukovski: A new loading history for identification of viscoplastic properties by spherical indentation. J. Mater. Res. 19, 101 (2004).
28. N. Huber and C, Tsakmakis: A neural network tool for identifying the material parameters of a finite deformation viscoplasticity model with static recovery. Comp. Meth. Appl. Mech. Eng. 191, 353 (2001).
29. G. Yagawa and H. Okuda: Neural networks in computational mechanics. Modell. Simul. Mater. Sci. Eng. 3, 435 (1996).
30. Y-T. Cheng and C-M. Cheng: Scaling, dimensional analysis, and indentation measurements, Mater. Sci. Eng. R 44, 91 (2004).
31. S. Haykin: Neural Networks: A Comprehensive Foundation (Macmillan, New York, 1994).
32. N. Huber: Application of neural networks on nonlinear, problems of mechanics. Habilitation Thesis, FZKA-Bericht 6504, Forschungszentrum Karlsruhe, Germany (2000, in German).
33. M. Riedmiller and H. Braun: A direct adaptive method for faster backpropagation learning: The RPROP algorithm, in Proceedings of the IEEE International Conference on Neural Networks, ICNN 93 (1993).