Surface roughness prediction using hybrid neural networks

Machining Science and Technology

Volumn 11, Issue 2, 2007, Pages 271-286

  Jesuthanam, C P ^a   Kumanan, S ^a   Asokan, P ^a  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Genetic algorithm; Neural network; Particle swarm optimization; Surface roughness

Indexed keywords

COMPUTATIONAL EFFICIENCY; GENETIC ALGORITHMS; MACHINING; NEURAL NETWORKS; OPTIMIZATION; PARAMETER ESTIMATION; PRODUCTIVITY;

HYBRID NEURAL NETWORKS; MACHINING PARAMETERS; PARTICLE SWARM OPTIMIZATION (PSO);

SURFACE ROUGHNESS;

EID: 34249737428     PISSN: 10910344     EISSN: 15322483     Source Type: Journal    
DOI: 10.1080/10910340701340141     Document Type: Article

References (54)

1. Back, D.K.; Ko, T.J.; Kim, H.S. (2001) Optimization of federate in a Face milling operation using surface roughness model. International, Journal of Machine Tools and Manufacture, 41: 451-462.
2. Beggan, C.; Woulfe, M.; Young, P.; Byrne, G. (1999) Using acoustic emission to predict surface quality. International Journal of Advanced Manufacturing Technology, 15: 737-742.
3. Benardos, P.G.; Vosniakos, G.C. (2002) Prediction of surface roughness in CNG face milling using neural networks and taguchi design of experiments. Robotics and Computer Integrated Manufacturing, 18:343-354.
4. Benardos, P.C.; Vosniakos, G.C. (2003) Predicting surface roughness in machining: a review. International Journal of Machina Tools and Manufacture, 43: 833-844.
5. Boothroyd, G.; Knight, W.A. (1988) Fundamentals of Machining and Machina Tools, Marcel Dekker, New York.
6. Brezocnik, M.; Kovacic, M.; Ficko, M. (2004) Prediction of surface roughness with genetic programming, Journal of Materials Processing Technology, 157-158: 28-36.
7. Chen, J.G.; Savage, M. (2001) A fuzzy-net based multilevel in-process surface roughness recognition system in milling operations. International Journal of Advanced Manufacturing Technology, 17:670-676.
8. Chien, W.T.; Chou, G. Y. (2001) The predictive model for machinability of 304 stainless steel Journal of Materials Processing Technology, 118: 442-447.
9. Chouhury, I.A.; El-Baradie, M.A. (1997) Surface roughness in the turning of high strength steel by factorial design of experiments. Journal of Materials Processing technology, 67: 55-61.
10. Cus, F.; Balic, J. (2003) Optimization of cutting process by GA approach. Robotics and Computer Integrated Manufacturing, 19: 113-121.
11. Davim, J.P. (2001) A note on the determination of optimal cutting conditions for surface finish obtained in turning using design of experiments. Journal of Materials Processing Technology, 116: 305-308.
12. Dereli, T.; Filiz, I.H.; Baykasoglu, A. (2001) Optimizing cutting parameters in process planning of prismatic parts by using genetic algorithm. International Journal of Production Research, 39: 3303-3328.
13. Dweiri, F.; Al-Jarrah, M.; Al-Wedyan, H. (2003) Fuzzy surface roughness modeling of CNC down milling of Alumic-79. Journal; of Materials Processing Technology, 133: 266-275.
14. Eberhart, R.C.; Kennedy, J. (1995) A new optimiser using particle swarm theory. In Proceedings of the Sixth International Symposium on Micromachine and Human Science, IEEE Service Center, Negoya, Japan, 39-43.
15. Eberhart, R.C.; Shi, Y. (2001) Particle swarm optimization: developments, applications and resources. Proceedings of the IEEE Congress on Evolutionary Computation, Seoul, Korea, 81-84.
16. El-Mounayri, H.; Dugla, Z.; Deng, H. (2003) Prediction of surface roughness in end milling using swarm intelligence, IEEE Swarm Intelligence Symposium, 220-227.
17. Feng, C.X.; Wang, X.F. (2003) Surface roughness predictive modeling: neural networks versus regression. IIE Transactions, 35: 11-27.
18. Gadelmawla, E.S.; Koura, M.M.; Maksoud, T.M.A.; Elewa, I.M.; Soliman, H.S. (2002) Roughness parameters. Journal of Materials Processing Technology, 123: 133-145.
19. Ghani, A.K.; Choudhury, I.A. (2002) Study of tool life, surface roughness and vibration in machining nodular cast iron with ceramic tool. Journal of Materials Processing Technology, 127: 17-22.
20. Goonatilake, S.; Khebbal, S. (1995). Intelligent Hybrid Systems. John Wiley & Sons, New York.
21. He, S.; Wu, QH.; Wen, J.Y.; Saunders, J.R.; Paton, R.C. (2004) A particle swarm optimizer with passive congregation. Journal of Biosystems, V78(1-3): 135-147.
22. Hu, X.; Shi, Y.; Eberhart, R. (2004) Recent advances in particle swarm. IEEE, 1: 90-96.
23. Huang, B.; Chen, J.C. (2003) An in-process neural network based surface roughness prediction system using a dynamometer in end milling operations. International, Journal of Advanced Manufacturing Technology, 21; 339-347.
24. Hwang, I.; Lee, H.; Ha, S. (2002) Hybrid neuro-fuzzy approach to the generation of measuring points for knowledge-based inspection planning. International Journal of Production Research, 40: 2507-2520.
25. Jesuthanam, C.P.; Kumanan, S. (2003) In-process quality control in machining using artificial neural network. In Proceedings of the National Conference on Advanced Machine Vision System for Societal Applications, Chennai, India, December 17-19, 215-221.
26. Kalra, P.; Prakash, N.R. (2003) A neuro-genetic algorithm approach for solving the inverse kinematics of robotic manipulators. IEEE, 2: 1979-1984.
27. Kannan, S.; Raja, M.S.; Subbaraj, P.; Prasad, N. (2004) Application of particle swarm optimization technique and its variants to generation expansion planning problem. Electric Power System Research, 70: 203-210.
28. Karpat, Y.; Ozel, T. (2006). Swarm intelligent neural network system based multi objective optimization of hard turning. Transactions of NAMRI/SME, 34: 1-10.
29. Kohli, A.; Dixit, U.S. (2005) A neural network based methodology for the prediction of surface roughness in a turning process. International Journal of Advanced Manufacturing Technology, 25: 118-129.
30. Lee, S.S.; Chen, J.C. (2003) On-line surface roughness recognition system using neural networks system in turning operations, International Journal of Advanced Manufacturing Technology, 22; 498-509.
31. Liang, S.Y.; Hecker, R.L.; Landers, R.G. (2004) Machining process monitoring and control : the state of the art. ASME - Journal of Manufacturing Science and Engineering, 126: 297-310.
32. Lin, S.C.; Chang, M.F. (1998) A study on the effects of vibrations on the surface finish using a surface topography simulation model for turning. International Journal of Machine Tools and Manufacture, 38: 763-782.
33. Mainsah, E.; Ndumu, D.T. (1998) Neural network applications in surface topography. International Journal of Machine Tools and Manufacture, 38: 591-598.
34. Milfelner, M.; Kopac, J.; Cus, F.; Zuperl, U. (2005) Genetic equation for the cutting force in ball-end milling. Journal of Materials Processing Technology, 164: 1554- 1560.
35. Mok, S.L.; Kwong, C.K.; Lau, W.S. (2001) A hybrid neural network and genetic algorithm approach to the determination of initial process parameters for injection moulding. International Journal of Advanced Manufacturing Technology, 18: 404-409.
36. Natarajan, U.; Saravanan, R.; Periasamy, V.M. (2006) Application of particle swarm optimization in artificial neural network for the prediction of tool life. International Journal of Advanced Manufacturing Technology, 28(11-12): 1084-1088.
37. Onwubolu, G. C.; Clerc, M. (2004) Optimal path for automated drilling operations by a new heuristic approach using particle swarm optimization. International Journal of Production Research, 42: 473-491.
38. Ozcelik, B.; Oktem, H.; Kurtaran, H. (2005) Optimum surface roughness in end milling Inconel 718 by coupling neural network model and genetic algorithm. International Journal of Advanced Manufacturing Technology, 27(3-4): 234-241.
39. Ozcl, T.; Karpat, Y. (2005) Predictive modeling of surface roughness and tool wear in hard turning using regression and neural networks. International Journal of Machine Tools and Manufacture-, 45; 467-479.
40. Palmes, P.P.; Hayasaka, T.; Usui, S. (2005) Mutation based genetic neural network. IEEE Transactions on Neural Networks, 16: 587-600.
41. Reddy, S.N.; Rao, V.P. (2005) Selection of optimum tool geometry and cutting conditions using a surface roughness prediction model for end milling. International Journal of Advanced Manufacturing Technology, 26(11-12): 1202-1210.
42. Roumbakis, M.; Mutnury, B.; Cases, M. (2005) Neuro-genetic models in Modeling nonlinear digital I/O buffer circuits. IEEE Electronic Components and Technology Conference, 1543-1548.
43. Salman, A.; Ahmad, I.; Al-Madani, S. (2002) Particle swarm optimization for task assignment problem. Journal of Microprocessors and Microsystems, 26: 363-371.
44. Shi, X.H.; Liang, Y.C.; Lee, H.P.; Lu, C.; Wang, L.M. (2005) An improved GA and a novel PSO-GA-based hybrid algorithm. Information Processing Letters, 93: 255-261.
45. Singh, A.K.; Panda, S.S.; Pal, S.K.; Chakraborty, D. (2006) Predicting drill wear using an artificial neural network. International, Journal of Advanced Manufacturing Technology, 28: 456-462.
46. Suresh, P.V.S.; Rao, V.P.; Deshmukh, S.G, (2002) A genetic algorithmic approach for optimization of surface roughness prediction model. International Journal of Machine Tools and Manufacture, 42: 675-680.
47. Tandon, V.; El-Mounayri, H.; Kishawy, H. (2002) NC end milling optimization using evolutionary computation. International Journal of Machine Tools and Manufacture, 42: 595-605.
48. Tanscl, I.N.; Ozcelik, B.; Bao, W.Y.; Chen, P.; Rincon, D.; Yang, S.Y.; Yenilmez, A. (2005) Selection of optimal cutting conditions by using GONNS. International Journal of Machine Tools and Manufacture, 46(1): 26-35.
49. Tayati, W.; Ghankaipol, W. (2002) Substation short term load forecasting using neural networks with genetic algorithm. In Proceedings of IEEE-TENCON' 02, 1787-1790.
50. Tsai, Y.-H.; Chen, J.G.; Lou, S.-J. (1999) An in-process surface recognition system based on neural networks in end milling cutting operations. International Journal of Machine Tools and Manufacture, 39: 583-605.
51. Wang, X.; Da, Z.J.; Balaji, A.K.; Jawhir, I.S. (2002) Performance based optimal selection of cutting conditions and cutting tools in multi pass turning operation using GA. International Journal of Production Research, 40: 2053-2065.
52. Wang, K.; Gelgel, H.L.; Wang, Y.; Yuan, Q.; Fang, M. (2003) A hybrid intelligent method for modeling the EDM process. International Journal of Machine Tools and Manufacture, 43: 995-999.
53. Zhong, Z.W.; Khoo, L.P.; Han, S.T. (2006) Prediction of surface roughness of turned surfaces using neural networks. International Journal of Advanced Manufacturing Technology, 28: 688-693.
54. Zhou, J.; Duan, Z.; Li, Y.; Deng, J.; Yu, D. (2006) PSO based neural network optimization and its utilization in a boring machine. Journal of Materials Processing Technology, 178(1-3); 19-23.