Design and fabrication of 3D-plotted polymeric scaffolds in functional tissue engineering

Polymer Engineering and Science

Volumn 47, Issue 5, 2007, Pages 608-618

  Yousefi, Azizeh Mitra ^a   Gauvin, Chantal ^a,c   Sun, Louise ^a,d   DiRaddo, Robert W ^a   Fernandas, Julio ^b  

^a NATIONAL RESEARCH COUNCIL CANADA   (Canada)

^b HÔPITAL DU SACRÉ COEUR DE MONTRÉAL   (Canada)

^c INSTITUT DE RECHERCHE ROBERT SAUVÉ EN SANTÉ ET EN SÉCURITÉ DU TRAVAIL   (Canada)

^d MCMASTER UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

BIOMIMETIC MATERIALS; FINITE ELEMENT METHOD; MECHANICAL PROPERTIES; POROSITY; STRESS CONCENTRATION; THREE DIMENSIONAL;

BIPHASIC THEORY; BOVINE CARTILAGE; TISSUE INGROWTH;

TISSUE ENGINEERING;

EID: 34248211259     PISSN: 00323888     EISSN: 15482634     Source Type: Journal    
DOI: 10.1002/pen.20732     Document Type: Article

References (51)

1. V.C. Mow and A. Ratcliffe, "Structure and Function of Articular Cartilage and Meniscus," in: Basic Orthopaedic Biomechanics, 2nd ed., V.C. Mow and W.C. Hayes, Eds., Lippincott-Raven, Philadelphia, Chapter 4 (1997).
2. J.K. Sherwood, S.L. Riley, R. Palazzolo, S.C. Brown, D.C. Monkhouse, M. Coates, L.G. Griffith, L.K. Landeen, and A. Ratcliffe, Biomaterials, 23, 4739 (2002).
3. C.O. Tibesku, T. Szuwart, T.O. Kleffner, P.M. Schlegel, U.R. Jahn, H. Van Aken, and S. Fuchs, J. Orthop. Res., 22, 774 (2004).
4. S. Mizuno, T. Ushida, T. Tateishi, and J. Glowacki, Mater. Sci. Eng. C, 6, 301 (1998).
5. J.P. Petersen, A. Ruecker, D. Von Stechow, P. Adamietz, R. Poertner, J.M. Rueger, and N.M. Meenen, Eur. J. Trauma, 1, 1 (2003).
6. D.W. Hutmacher, Biomaterials, 21, 2529 (2000).
7. S.G. Hollister, R.D. Maddox, and J.M. Taboas, Biomaterials, 23, 4095 (2002).
8. F. Guilak and V.C. Mow, J. Biomech., 33, 1663 (2000).
9. T.B.F. Woodfield, C.A. Van Blitterswijk, J. De Wijn, T.J. Sims, A.P. Hollander, and J. Riesle, Tissue Eng., 11, 1297 (2005).
10. K.C. Shin, B.S. Kim, J.H. Kim, T.G. Park, J.D. Nam, and D.S. Lee, Polymer, 46, 3801(2005).
11. H.D. Kim, E.H. Bae, I.C. Kwon, R.R. Pal, J.D. Nam, and D.S. Lee, Biomaterials, 25, 2319 (2004).
12. L.M. Mathieu, T.L. Mueller, P.-E. Bourban, D.P. Pioletti, R. Müller, and J.-A.E. Månson, Biomaterials, 27, 905 (2006).
13. S. Oh, S.G. Kang, E.S. Kim, S.H. Cho, and J.H. Lee, Biomaterials, 24, 4011 (2003).
14. A.G. Mikos, Y. Bao, L.G. Cima, D.E. Ingber, J.P. Vacanti, and R. Langer, J. Biomed. Mater. Res., 27, 183 (1993).
15. K. Whang, C.H. Thomas, and K.E. Healy, Polymer, 36, 837 (1995).
16. J.J. Yoon, J.H. Kim, and T.G. Park, Biomaterials, 24, 2323 (2003).
17. Q. Cai, J. Yang, J.B., and S. Wang, Biomaterials, 23, 4483 (2002).
18. J. Reignier and M.A. Huneault, Polymer, 47, 4703 (2006).
19. L. Moroni, J.R. de Wijn, and C.A. van Blitterswijk, Biomaterials, 27, 974 (2006).
20. R. Landers, A. Pfister, U. Hübner, H. John, R. Schmelzeisen, and R. Mülhaupt, J. Mater. Sci., 37, 3107 (2002).
21. A. Pfister, R. Landers, A. Laib, U. Hübner, R. Schmelzeisen, and R. Mülhaupt, J. Polym. Sci. Part A: Polym. Chem., 42, 624 (2004).
22. D.W. Hutmacher, M. Sittinger, and V. Risbud, Trends Biotechnol., 22, 354 (2004).
23. S. Hollister, Nat. Mater., 4, 518 (2005).
24. V.C. Mow and X.E. Guo, Annu. Rev. Biomed. Eng., 4, 175 (2002).
25. V.C. Mow, S.C. Kuei, W.M. Lai, and C.G. Armstrong, J. Biomech. Eng., 102, 73 (1980).
26. E.S. Almeida and R.L. Spilker, Comput. Meth. Appl. Mech. Eng., 151, 513 (1998).
27. W. Ehlers and B. Markert, J. Biomech. Eng., 123, 418 (2001).
28. B. Cohen, W.M. Lai, and V.C. Mow, J. Biomech. Eng., 120, 491 (1998).
29. C.G. Armstrong, W.M. Lai, and V.C. Mow, J. Biomech. Eng., 106, 165 (1984).
30. P.M. Bursac, T.W. Obitz, S.R. Eisenberg, and D. Stamenovic, J. Biomech., 32, 1125 (1999).
31. K.-J. Bathe, Finite Element Procedures in Engineering Analysis, Prentice-Hall, Englewood Cliffs, NJ (1982).
32. G.A. Holzapfel, Nonlinear Solid Mechanics: A Continuum Approach for Engineering, Wiley, New York (2000).
33. A.M. Yousefi, C. Gauvin, P. Debergue, D. Laroche, R. DiRaddo, and J. Fernandes, in SPE ANTEC Conference, Chicago, IL (2004).
34. G.N. Vanderplaats, Numerical Optimization Techniques for Engineering Design, 3rd ed., Vanderplaats Research & Development Inc., Colorado (1999).
35. P. Debergue and D. Laroche, Fourth Int. ESAFORM Conf. Mater. Forming, 1, 365 (2001).
36. D. Laroche, K.K. Kabanemi, L. Pecora, and R.W. Diraddo, Polym. Eng. Sci., 39, 1223 (1999).
37. J. Bonet and R. Wood, Nonlinear Continuum Mechanics for Finite Element Analysis, Cambridge University Press, Cambridge (1997).
38. J.M. Dealy, Melt Rheology and Its Rhole in Plastics Processing, Van Nostrand Reinhold, New York (1990).
39. S.Y. Kim, D.-G. Choi, and S.-M. Yang, Korean J. Chem. Eng., 19, 190 (2002).
40. D. Laroche, S. Delorme, T. Anderson, J. Buithieu, and R. DiRaddo, in Medicine Meets Virtual Reality (MMVR 14), Long Beach, CA (2006).
41. J.D. Ferry, Viscoelastic Properties of Polymers, 3rd ed., Wiley, New York (1980).
42. H.A. Awad, M.Q. Wickham, Y.-D. Halvorsen, J.M. Gimble, and F. Guilak, in Summer Bioengineering Conference, Florida (2003).
43. R.L. Mauck, M.A. Soltz, C.C.B. Wang, D.D. Wong, P.-H.G. Chao, W.B. Valhmu, C.T. Hung, and G.A. Ateshian, J. Biomech. Eng., 122, 252 (2000).
44. M.S. Laasanen, J. Töyräs, R.K. Korhonen, J. Rieppo, S. Saarakkala, M.T. Nieminen, J. Hirvonen, and J.S. Jurvelin, Biorheology, 40, 133 (2003).
45. W. Zhu, V.C. Mow, T.J. Koob, and D.R. Eyre, J. Orthop. Res., 11, 771 (1993).
46. Y. Wan, A. Yu, H. Wu, Z. Wang, and D. Wen, J. Mater. Sci. Mater. Med., 16, 1017 (2005).
47. N. Eliopoulos, L. Lejeune, D. Martineau, and J. Galipeau, Mol. Ther., 10, 741 (2004).
48. D.J. Mooney, K. Sano, P.M. Kaufmann, K. Majahod, B. Schloo, J.P. Vacanti, and R. Langer, J. Biomed. Mater. Res., 37, 413 (1997).
49. M.M.C.G. Silva, L.A. Cyster, J.J.A. Barry, X.B. Yang, R.O.C. Oreffo, D.M. Grant, C.A. Scotchford, S.M. Howdle, K.M. Shakesheff, and F.R.A.J. Rose, Biomaterials, 27, 5909 (2006).
50. S. Miyata, T. Tateishi, K. Furukawa, and T. Ushida, JSME Int. J. Ser. C, 48, 547 (2005).
51. R.M. Capito and M. Spector, IEEE Eng. Med. Biol. Mag., 22, 42 (2003).