Prediction of necking in tubular hydroforming using an extended stress-based forming limit curve

Journal of Engineering Materials and Technology

Volumn 129, Issue 1, 2007, Pages 36-47

  Simha, C Hari Manoj ^a   Gholipour, Javad ^b   Bardelcik, Alexander ^a   Worswick, Michael J ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

^b UNIVERSITÉ DE MONTRÉAL   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL METHODS; FINITE ELEMENT METHOD; SHEET METAL; STRESS ANALYSIS; THREE DIMENSIONAL;

EXTENDED STRESS BASED FORMING LIMIT CURVE (XSFLC); HYDROFORMING; STRESS LOADING;

METAL FORMING;

EID: 34248162333     PISSN: 00944289     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2400269     Document Type: Article

References (38)

1. Keeler, S. P., and Backofen, W. A., 1963, "Plastic Instability and Fracture in Sheets Stretched Over Rigid Punches," ASM Trans. Q., 56, pp. 25-48.
2. Goodwin, G. M., 1968, "Application of Strain Analysis to Sheet Metal Forming in the Press Shop," SAE Paper, No. 680093.
3. Ghosh, A. K., and Laukonis, J. V., 1976, "The Influence of Strain Path Changes on the Formability of Sheet Steel," 9th Biennial Congress of The International Deep Drawing Research Group, Sheet Metal Forming and Energy Conservation, ASM, Metals Park, OH.
4. Graf, A., and Hosford, W., 1993, "Effect of Changing Strain Paths on Forming Limit Diagrams of Al 2008-T4," Metall. Trans. A, 24A, pp. 2503-2512.
5. Stoughton, T. B., 1999, "A General Forming Limit Criterion for Sheet Metal Forming," Int. J. Mech. Sci., 42, pp. 1-27.
6. Stoughton, T. B., 2001, "Stress-Based Forming Limits in Sheet-Metal Forming," ASME J. Eng. Mater. Technol., 123(4), pp. 417-422.
7. Embury, J. D., and LeRoy, G. H., 1977, "Failure Maps Applied to Metal Deformation Processes," Advances in Research on the Strength and Fracture of Materials, Pergamon Press, London, pp. 15-42.
8. Koç, M., and Altan, T., 2001, "An Overall Review of the Tube Hydroforming (THF) Technology," J. Mater. Process. Technol., 108(3), pp. 384-393.
9. Gotoh, M., Chung, C., and Iwata, N., 1995, "Effect of Out-of-Plane Stress on the Forming Limit Strain of Sheet Metals," JSME Int. J., Ser. A, 38(1), pp. 123-132.
10. Smith, L. M., Averill, R. C., Lucas, J. P., Stoughton, T. B., and Matin, P. H., 2003, "Influence of Transverse Normal Stress on Sheet Metal Formability," Int. J. Plast., 19(10), p. 1567-1583.
11. Saanouni, K., Nesnas, K., and Hammi, Y., 2000, "Damage Modeling in Metal Forming Processes," Int. J. Damage Mech., 9, pp. 196-240.
12. Cherouat, A., Saanouni, K., and Hammi, Y., 2002, "Numerical Improvement of Thin Tubes Hydroforming With Respect to Ductile Damage," Int. J. Mech. Sci., 44(12), pp. 2427-2446.
13. Baradari, G. J., 2006, "Damage in Hydroforming of Pre-Bent Aluminum Alloy Tubes," Ph.D. thesis, Department of Mechanical Engineering, University of Waterloo.
14. Gurson, A. L., 1977, "Continuum Theory and Ductile Rupture by Void Nucleation and Growth: Part I - Yield Criteria and Row Rules for Porous Ductile Media," ASME J. Eng. Mater. Technol., 99(1), pp. 2-15.
15. Tvergaard, V., and Neeldeman, A., 1984, "Analysis of the Cup-Cone Fracture in a Round Tensile Bar," Acta Metall., 32, pp. 157-169.
16. Gholipour, J., Worswick, M. J., and Oliveira, D., 2004, "Application of Damage Models in Bending and HydroForming of Aluminum Alloy Tube," SAE 2004 World Congress, SAE Paper No. 2004-01-0835.
17. Dwyer, N., Worswick, M. J., Gholipour, J., Xia, C., and Khodayari, G., 2002, "Pre-Bending and Subsequent Hydroforming of Tube: Simulation and Experiment," NUMIFORM 2002, Proceedings of the 5th International Conference and Workshop on Numerical Simulation of 3D Sheet Forming Processes, Jaejon Korea, pp. 447-452.
18. Oliveira, D. A., Worswick, M. J., and Grantab, R., 2005, "Effect of Lubricant in Mandrel-Rotary Draw Tube Bending of Steel and Aluminum," Can. Metall. Q., 44, pp. 71-78.
19. Dyment, J., Worswick, M., Normani, F., Oliveira, D., and Khodayari, G., 2003, "Effect of Endfeed on Strains and Thickness During Bending and on the Subsequent Hydroformability of Steel Tubes," Proceedings IBEC2003, SAE Paper No. 2003-01-2837.
20. Khodayari, G., 2001, "Final Report- USAMP Hydroforming of Aluminum Tubes," Technical Report, Industrial Research and Development Institute.
21. Keeler, S. P., and Brazier, W. G., 1977, "Relationship Between Laboratory Material Characterization and Press Shop Formability," Proc. of Microalloy 75, Union Carbide, New York, pp. 447-452.
22. Wilkins, M. L., 1964, "Calculation of Elastic-Plastic Flow," Methods in Computational Physics, Vol. 3, Fundamental Methods in Hydrodynamics. Academic Press, New York.
23. Belytschko, T., Liu, W. K., and Moran, B., 2000, Nonlinear Finite Elements for Continua and Structures, Wiley, New York.
24. Koc, M., Aue-u-lan, Y., and Altan, T., 2001, "On the Characteristics of Tubular Materials for Hydroforming: Experimentation and Analysis," Int. J. Mach. Tools Manuf., 41(5), pp. 761-772.
25. Levy, B. S., Tyne, C. J. V., and Stringfield, J. M., 2004, "Characterizing Steel Tube for Hydroforming Applications," J. Mater. Process. Technol., 150(3), pp. 280-289.
26. Belytschko, T., Lin, J., and Tsay, C. S., 1984, "Explicit Algorithms for the Nonlinear Dynamics of Shells," Comput. Methods Appl. Mech. Eng., 42, pp. 225-251.
27. Bardelcik, A., and Worswick, M. J., 2005, "Evaluation of Load Control End-Feed in Hydroforming of Pre-Bent DP600 Steel Tube Using the Extended Stress-Based Forming Limit Curve (XSFLC) Failure Criterion," Numerical Methods in Continuum Mechanics 2005.
28. Prier, M., and Schmoeckel, D., 1999, "Tribology of Internal High Pressure Forming," Proceedings of Internatioinal Conference on Hydroforming, Stuttgart, Germany, Stuttgart, Germany.
29. Koç, M., 2003, "Tribological Issues in the Tube Hydroforming ProcessSelection of a Lubricant for Robust Process Conditions for an Automotive Structural Frame Part," ASME J. Manuf. Sci. Eng., 125(3), pp. 484-92.
30. Ngaile, G., Jaeger, S., and Altan, T., 2004, "Lubrication in Tube Hydroforming (THF): Part II. Performance Evaluation of Lubricants Using LDH Test and Pear-Shaped Tube Expansion Test," J. Mater. Process. Technol., 146(1), pp. 116-123.
31. Vollertsen, F., and Plancak, M., 2002, "On Possibilities for the Determination of the Coefficient of Friction in Hydroforming of Tubes," J. Mater. Process. Technol., 125-126, pp. 412-420.
32. Schey, J. A., and Nautiyal, C., 1990, "Effects of Surface Roughness on Friction and Metal Transfer in Lubricated Sliding of Aluminum Alloys Against Steel Surfaces," Wear, 146, pp. 37-51.
33. Hallquist, J. O., 1998, LS-DYNA - Theoretical Manual, Livermore Software Technology Corp., Livermore, CA
34. Green, D. E., and Stoughton, T. B., 2004, "Evaluating Hydroforming Severity Using Stress-Based Forming Limits," Second Annual Hydroforming Conference.
35. Zandrahimi, M., Platias, S., Price, D., Barrett, D., Bate, P., Roberts, W., and Wilson, D., 1989, "Effects of Changes in Strain Path on Work Hardening in Cubic Metals," Metall. Trans. A, 20A(11), pp. 2471-2482.
36. Lloyd, D. J., and Sang, H., 1979, "Influence of Strain Path on Subsequent Mechanical Properties - Orthogonal Tensile Paths," Metall. Trans. A, 10A(11), pp. 1767-1772.
37. Laukonis, J. V., and Ghosh, A. K., 1978, "Effect of Strain Path Changes on the Formability of Sheet Metals," Metall. Trans. A, 9A(12), pp. 1849-1856.
38. Yoshida, K., Kuwabara, T., and Kuroda, M., 2005, "Forming Limit Stresses of Sheet Metal Under Proportional and Combined Loadings," NUMISHEET 2005: Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Process, Smith, L. M., Pourboghrat, F., Yoon, J.-W., and Stoughton, T. B., eds., AIP, New York, Vol. 778.