Tribological issues in the tube hydroforming process - Selection of a lubricant for robust process conditions for an automotive structural frame part

Journal of Manufacturing Science and Engineering

Volumn 125, Issue 3, 2003, Pages 484-492

  Koç, Muammer ^a  

^a UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AUTOMOBILE FRAMES; FRICTION; LUBRICATION;

TUBE HYDROFORMING PROCESS (THF);

TRIBOLOGY;

EID: 0042233799     PISSN: 10871357     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.1580526     Document Type: Review

References (41)

1. Koç, M., and Altan, T., 2001, "An Overall Review of the Tube Hydroforming (THF) Technology," J. Mater. Process. Technol. 108(3), pp. 384-393.
2. Dohmann, F., and Bieling, P., 1991, "Theoretical Basis and Applications of High Pressure Forming," Bleche Rohre Profile, 38(5), pp. 379-385.
3. Dohmann, F., and Hartl, C., 1994, "Liquid Bulge Forming as a Flexible Production Method," J. Mater. Process. Technol. 45, pp. 377-382.
4. Dohmann, F., and Hartl, C., 1998, "Hydroforming Components for Automotive Applications," Fabricator, February, 30-38.
5. Wilson, W. R. D., 1997, "Tribology in Cold Metal Forming," ASME J. Manuf. Sci. Eng., 119, pp. 695-698.
6. Schey, J. A., 1983, Tribology in Metalworking, Friction, Lubricant and Wear, ASM, Metals Park, Ohio.
7. Le, H. R., and Sutcliffe, M. P. F., 2002, "Measurements of Friction in Strip Drawing Under Thin Film Lubrication," Tribol. Int., 35. pp. 123-128.
8. Prier, M., and Schmoeckel, D., 1999, "Tribology of Internal High Pressure Forming," Proc. of Int'l Conf. on Hydroforming, Stuttgart, Germany, October 12-13.
9. Meyer, W., and Dohmann, F., 1997, "Tribology in Internal High Pressure Forming" (in German), Blech Rohre Profile, 36-39, October.
10. Kraan, D. J., 1981, "Metal Forming Oils," Tribol. Int., 14, February, pp. 29.
11. Limb, M. E., Chakrabarty, J., Garber, S., and Mellor, P. B., 1973, "The Forming of Axisymmetric and Asymmetric Components from Tube," Proceedings of the 14th Int'l. M.T.D.R. Conference, pp. 799-805.
12. Limb, M. E., Chakrabarty, J., Garber, S., and Roberts, W. T., 1976, "Hydraulic Forming of Tubes," Sheet Metal Industries, November, pp. 418-424.
13. Ahmed, M., and Hashimi, M. S. J., 1997, "Comparison of Free and Restrained Bulge Forming by FEM Simulation," J. Mater. Process. Technol., 63, pp. 651-654.
14. Zu, Z. M., and Dean, T. A., 2000, "A Study of Surface Topography, Friction and Lubricants in Metal Forming," Int. J. Mach. Tools Manuf., 40, pp. 1637-1649.
15. Sofuoglu, H., and Gedikli, H., 2002, "Determination of Friction Coefficient Encountered in Large Deformation Processes," Tribol. Int., 35, pp. 27-34.
16. Harycki, R. M., Gasper, K. E., Wagoner, R. H., 1994, "A New Method for Ranking Sheet Metal Lubricants," Metal Forming Magazine, November.
17. Lazzarotto, L., Dubar, L., Oudin, J., 1998, "A Selection Methodology for Lubricating Oils in Cold Metal Forming Processes," Wear, 215, pp. 1-9.
18. Klocke, F., Beck, T., and Sweeney, K., 2002, "Examples of FEM Application in Manufacturing Technology," J. Mater. Process. Technol., 120, pp. 450-457.
19. Singh, H., 1999, "Simulation of Hydroforming Process," Proc. Of Automotive Tube Conference, Detroit, MI, US, April 26-27.
20. Koç, M., and Altan, T., 2002, "Application of Two-Dimensional (2D) FEA for Expansion of Tubular Parts and Sections via Hydroforming Process," Int. J. Mach. Tools Manuf., March.
21. Koç, M., Allen, T., Jirathearanat, S., and Altan, T., 2000, "Use of FEA and Design of Experiments to Establish Design Guidelines for Simple Hydroformed Part," Int. J. Mach. Tools Manuf., 40, pp. 2249-2266.
22. Srinivasan, T. M., Shaw, J., and Thompson, K., 1998, "Tubular Hydroforming: Results," SAE paper 980448, Intl. Congress and Exposition, Detroit, MI, February.
23. Wilson, W. R. D., Hsu, T. C., and Huang, X. B., 1995, "A Realistic Friction Model for Computer Simulation of Sheet Metal Forming Process," ASME J. Eng. Ind., 117, May, pp. 202-209.
24. Hsu, T. C., and Lee, C. H., 1997, "Refined Friction Modeling for Simple Upsetting," ASME J. Manuf. Sci. Eng., 119, pp. 563-570.
25. Guerin, J. D., Bartys, H., Dubais, A., and Oudin, J., 1995, "FE Implementation of a Generalized Friction Model: Application to a Upsetting-Sliding Test," FE in Analysis and Design, 31, pp. 193-207.
26. Behren, A., and Schofetall, H., 1998, "2D and 3D Simulation of Complex Multistage Forging Process by Use of Adaptive Friction Coefficient," J. Mater. Process. Technol., 80-81, pp. 298-303.
27. Lee, B. H., Kim, Y. T., and Wagoner, R. H., 2002, "Modeling of the Friction Caused by Lubrication and Surface Roughness in Sheet Metal Forming," J. Mater. Process. Technol., 6244, pp. 1-4.
28. Steinhoff, K., Rasp, W., and Pawelski, O., 1996, "Development of Deterministic-Stochastic Surface Structures to Improve the Tribological Conditions of Sheet Forming Processes," J. Mater. Process. Technol., 60, pp. 355-361.
29. Rasp, W., and Wichern, C. M., 2002, "Effects of Surface Topography Directionality and Lubrication Condition on Frictional Behavior During Plastic Deformation," J. Mater. Process. Technol., 125-126, pp. 379-386.
30. Story, J. M., Jarvis, G. W., Murtha, S. J., 1993, "Issues and Trends in Automotive Aluminum Sheet Forming," SAE Publ #Sp-944, pp. 1-25.
31. Rao, K. P., and Wei, J. J., 2001, "Performance of a New Dry Lubricant in the Forming of Aluminum Alloys Sheets," Wear, 249. pp. 86-93.
32. Erdemir, A., and Fenske, G. R., 1998, "Clean and Cost-effective Dry Boundary Lubricants for Aluminum Forming," SAE Special Publication, NO. SP-1350, pp. 9-17.
33. G. Dalton, 1999, "The Role of Lubricants in Hydroforming," Automotive Tube Conference, Detroit, MI, April 26-27.
34. Morgan, B., and Brownbeck, P., 2000, "Lubricant Interaction in Hydroforming of Tubes," Hydroforming Journal (supplement to Journal of Tube and Pipe), March, pp. 14-16.
35. Simonetti, C., 2000, "Why Are You Lubricating On-site," Fabricating Equipment News, October, pp. 55-57.
36. Schmoeckel, D., Hielscher. C., Huber, R., and Prier, M., 1997, "Internal High Pressure Forming at PtU" (in German), PtU der Technischen Hochschule Darmstadt.
37. Ngaile, G., Tibari, K., and Altan, T., 2000, "Progress in Tube Hydroforming-Formability, Friction and Design Guidelines," Proc. Int'l Conf. on Innovations in THF Tech., Troy, MI, June 13-14.
38. Vollertsen, F., and Plancak, M., 2002, "On Possibilities for the Determination of the Coefficient of Friction in Hydroforming of Tubes," J. Mater. Process. Technol., 125-126, pp. 412.
39. Eickemeyer, J., Vogel, H. R., Reichert, J., and Rehm, M., 1996, "Some Tribological and Environmental Aspects in Metal Drawing," Tribol. Int., 29(3), pp. 193.
40. Adhvaryu, A., and Erhan, S. Z., 2002, "Epoxldized Soybean Oil as a Potential Source of High-temperature Lubricants," Ind. Crops and Prod., 15, pp. 247.
41. Yoshimura, H., Torikai, S., Nishimura, T., Nonishi, T., and Inouchi, N., 2002, "Application of Wheat Flour Lubricants to the Press-forming Process," J. Mater. Process. Technol., 125-126, pp. 375.