메뉴 건너뛰기




Volumn 108, Issue 3, 2001, Pages 384-393

Overall review of the tube hydroforming (THF) technology

Author keywords

[No Author keywords available]

Indexed keywords

FORMABILITY; FRICTION; LUBRICANTS; LUBRICATION; TRIBOLOGY; TUBES (COMPONENTS);

EID: 0035147723     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(00)00830-X     Document Type: Article
Times cited : (302)

References (84)
  • 1
    • 85031528949 scopus 로고    scopus 로고
    • Apparatus for making wrought metal T's, US Patent 2,203,868 June (1939)
    • J.E. Grey, A.P. Devereaux, W.N. Parker, Apparatus for making wrought metal T's, US Patent 2,203,868 June (1939).
    • Grey, J.E.1    Devereaux, A.P.2    Parker, W.N.3
  • 2
    • 85143509460 scopus 로고
    • Yield and fracture of medium-carbon steel under combined stress
    • March
    • E.A. Davis, Yield and fracture of medium-carbon steel under combined stress, J. Appl. Mech. (March 1945) A13-A24.
    • (1945) J. Appl. Mech.
    • Davis, E.A.1
  • 3
    • 85136328793 scopus 로고
    • Yield and bursting characteristics of heavy wall cylinders
    • July
    • J.H. Faupel, Yield and bursting characteristics of heavy wall cylinders, Trans. ASME ( July 1956).
    • (1956) Trans. ASME
    • Faupel, J.H.1
  • 5
    • 85031520646 scopus 로고
    • The flow behavior of thick-walled cylinders under internal pressure
    • in German
    • H. Dietmann, The flow behavior of thick-walled cylinders under internal pressure, Bander Bleche Rohre 8 (3) (1967) 143-149 (in German).
    • (1967) Bander Bleche Rohre , vol.8 , Issue.3 , pp. 143-149
    • Dietmann, H.1
  • 6
    • 0342788929 scopus 로고
    • The ultimate tensile strength of thin-walled shells and circular diaphgrams subjected to hydrostatic pressure
    • Mellor P.B. The ultimate tensile strength of thin-walled shells and circular diaphgrams subjected to hydrostatic pressure. Int. J. Mech. Sci. 1:1960;216-228.
    • (1960) Int. J. Mech. Sci. , vol.1 , pp. 216-228
    • Mellor, P.B.1
  • 7
    • 0342788930 scopus 로고
    • Tensile instability of thin-walled cylinders of finite length
    • Weil N.A. Tensile instability of thin-walled cylinders of finite length. Int. J. Mech. Sci. 5:1963;487-506.
    • (1963) Int. J. Mech. Sci. , vol.5 , pp. 487-506
    • Weil, N.A.1
  • 8
    • 0004515078 scopus 로고
    • The analysis of axisymmetric forming of sheet metal and the hydrostatic bulging process
    • Woo D.M. The analysis of axisymmetric forming of sheet metal and the hydrostatic bulging process. Int. J. Mech. Sci. 6:1964;303-317.
    • (1964) Int. J. Mech. Sci. , vol.6 , pp. 303-317
    • Woo, D.M.1
  • 9
    • 0038383905 scopus 로고
    • Hydrostatic pressure - its role in metal forming
    • April
    • F.J. Fuchs, Hydrostatic pressure - its role in metal forming, Mech. Eng. (April 1966) 34-40.
    • (1966) Mech. Eng. , pp. 34-40
    • Fuchs, F.J.1
  • 12
    • 0014813571 scopus 로고
    • Comparison between the bulging of thin-walled tubes using rubber forming technique and hydraulic forming process
    • July
    • H.A. Al-Qureshi, Comparison between the bulging of thin-walled tubes using rubber forming technique and hydraulic forming process, Sheet Metal Ind. (July 1970) 607-612.
    • (1970) Sheet Metal Ind. , pp. 607-612
    • Al-Qureshi, H.A.1
  • 14
    • 84922285278 scopus 로고
    • Tube-bulging under internal pressure and axial force
    • October
    • D.M. Woo, Tube-bulging under internal pressure and axial force, J. Eng. Mater. Technol. (October 1973) 219-223.
    • (1973) J. Eng. Mater. Technol. , pp. 219-223
    • Woo, D.M.1
  • 15
    • 85031531507 scopus 로고
    • Forming of tube by hydraulic pressure
    • Ontario, Canada, May 14-15
    • G. Powel, B. Avitzur, Forming of tube by hydraulic pressure, in: Proceedings of the NAMRC, Ontario, Canada, May 14-15, 1973, pp. 65-83.
    • (1973) In: Proceedings of the NAMRC , pp. 65-83
    • Powel, G.1    Avitzur, B.2
  • 18
    • 0017969372 scopus 로고
    • Development of a bulge forming process
    • May
    • D.M. Woo, Development of a bulge forming process, Sheet Metal Ind. (May 1978) 623-625.
    • (1978) Sheet Metal Ind. , pp. 623-625
    • Woo, D.M.1
  • 19
    • 0018024841 scopus 로고
    • Plastic deformation of anisotropic tubes in hydraulic bulging
    • Woo D.M., Lua A. Plastic deformation of anisotropic tubes in hydraulic bulging. J. Eng. Mater. Technol. 100:1978;421-425.
    • (1978) J. Eng. Mater. Technol. , vol.100 , pp. 421-425
    • Woo, D.M.1    Lua, A.2
  • 20
    • 0020814523 scopus 로고
    • Influence of material properties in forming of tubes
    • K. Manabe, H. Nishimura, Influence of material properties in forming of tubes, Bander Bleche Rohre 9 (1983).
    • (1983) Bander Bleche Rohre , vol.9
    • Manabe, K.1    Nishimura, H.2
  • 21
    • 0005242231 scopus 로고
    • Bulge forming of thin-walled tubes by micro-computer controlled hydraulic press
    • Manabe K., Mori S., Suzuki K., Nishimura H. Bulge forming of thin-walled tubes by micro-computer controlled hydraulic press. Adv. Technol. Plasticity. 1:1984;279-284.
    • (1984) Adv. Technol. Plasticity , vol.1 , pp. 279-284
    • Manabe, K.1    Mori, S.2    Suzuki, K.3    Nishimura, H.4
  • 22
    • 0038004832 scopus 로고
    • Influence of strain hardening exponent on the deformation of thin-walled tube of finite length subjected to hydrostatic external pressure
    • Fuchizawa S. Influence of strain hardening exponent on the deformation of thin-walled tube of finite length subjected to hydrostatic external pressure. Adv. Technol. Plasticity. 1:1984;297-302.
    • (1984) Adv. Technol. Plasticity , vol.1 , pp. 297-302
    • Fuchizawa, S.1
  • 23
    • 0037667092 scopus 로고
    • Influence of plastic anisotropy on deformation of thin-walled tubes in bulge forming
    • Fuchizawa S. Influence of plastic anisotropy on deformation of thin-walled tubes in bulge forming. Adv. Technol. Plasticity. 2:1987;727-732.
    • (1987) Adv. Technol. Plasticity , vol.2 , pp. 727-732
    • Fuchizawa, S.1
  • 24
    • 0001138122 scopus 로고
    • Deformation of metal tubes under hydrostatic bulge forming with closed die
    • Fuchizawa S. Deformation of metal tubes under hydrostatic bulge forming with closed die. Adv. Technol. Plasticity. 3:1990;1543-1548.
    • (1990) Adv. Technol. Plasticity , vol.3 , pp. 1543-1548
    • Fuchizawa, S.1
  • 25
    • 0005328172 scopus 로고
    • Bulge test for determining stress-strain characteristics of thin tubes
    • S. Fuchizawa, M. Narazaki, H. Yuki, Bulge test for determining stress-strain characteristics of thin tubes, Adv. Technol. Plasticity (1993) 488-493.
    • (1993) Adv. Technol. Plasticity , pp. 488-493
    • Fuchizawa, S.1    Narazaki, M.2    Yuki, H.3
  • 26
    • 0342788926 scopus 로고
    • A theory for the bulging of aluminum tubes using urethane rod
    • February
    • S. Thiruvarudchelvan, A theory for the bulging of aluminum tubes using urethane rod, J. Eng. Technol. (February 1989).
    • (1989) J. Eng. Technol.
    • Thiruvarudchelvan, S.1
  • 27
    • 0028405246 scopus 로고
    • A theory for initial yielding conditions in tube bulging with a urethane rod
    • Thiruvarudchelvan S. A theory for initial yielding conditions in tube bulging with a urethane rod. J. Mater. Process. Technol. 42:1994;61-74.
    • (1994) J. Mater. Process. Technol. , vol.42 , pp. 61-74
    • Thiruvarudchelvan, S.1
  • 29
    • 0020717704 scopus 로고
    • Differential gear casings for automobile is liquid bulge forming process - Part 1
    • Ueda T. Differential gear casings for automobile is liquid bulge forming process - Part 1. Sheet Metal Ind. - Metal Forming. 60(3):1983;181-184.
    • (1983) Sheet Metal Ind. - Metal Forming , vol.60 , Issue.3 , pp. 181-184
    • Ueda, T.1
  • 30
    • 0020734551 scopus 로고
    • Differential gear casings for automobile is liquid bulge forming process - Part 2
    • Ueda T. Differential gear casings for automobile is liquid bulge forming process - Part 2. Sheet Metal Ind. - Metal Forming. 60(4):1983;220-222.
    • (1983) Sheet Metal Ind. - Metal Forming , vol.60 , Issue.4 , pp. 220-222
    • Ueda, T.1
  • 31
    • 0020909997 scopus 로고
    • Forming of tubular components from straight tubings using combined axial load and internal pressure: Theory and experiment
    • Metals Society, London
    • M.S.J. Hashimi, Forming of tubular components from straight tubings using combined axial load and internal pressure: theory and experiment, in: Proceedings of the International Conference on Development on Drawing of Metals, Metals Society, London, 1983, pp. 146-155.
    • (1983) In: Proceedings of the International Conference on Development on Drawing of Metals , pp. 146-155
    • Hashimi, M.S.J.1
  • 32
    • 0022270133 scopus 로고
    • Hydraulic bulge forming of axisymmetric and asymmetric components: Comparison of experimental results and theoretical predictions
    • M.S.J. Hashimi, R. Crampton, Hydraulic bulge forming of axisymmetric and asymmetric components: comparison of experimental results and theoretical predictions, in: Proceedings of the International MTDR Conference, 1985, pp. 541-549.
    • (1985) In: Proceedings of the International MTDR Conference , pp. 541-549
    • Hashimi, M.S.J.1    Crampton, R.2
  • 33
    • 0031071329 scopus 로고    scopus 로고
    • Estimation of machine parameters for hydraulic bulge forming of tubular components
    • Ahmed M., Hashimi M.S.J. Estimation of machine parameters for hydraulic bulge forming of tubular components. J. Mater. Process. Technol. 64:1997;9-23.
    • (1997) J. Mater. Process. Technol. , vol.64 , pp. 9-23
    • Ahmed, M.1    Hashimi, M.S.J.2
  • 34
    • 0002597660 scopus 로고
    • The research of tube bulging using polyurethane under compound external forces and its application
    • W. Tonghai, S. Sheng, M. Dexiu, The research of tube bulging using polyurethane under compound external forces and its application, Adv. Technol. Plasticity (1993) 494-499.
    • (1993) Adv. Technol. Plasticity , pp. 494-499
    • Tonghai, W.1    Sheng, S.2    Dexiu, M.3
  • 35
    • 0030216765 scopus 로고
    • On tube expansion by internal fluid pressure with additional compressive stress
    • Tirosh J., Neuberger A., Shirizly A. On tube expansion by internal fluid pressure with additional compressive stress. J. Mech. Sci. 38(8-9):1995;839-851.
    • (1995) J. Mech. Sci. , vol.38 , Issue.89 , pp. 839-851
    • Tirosh, J.1    Neuberger, A.2    Shirizly, A.3
  • 36
    • 0342553644 scopus 로고
    • Expansion upsetting of tubes using internal high pressure forming
    • VDI-Verlag, Düsseldorf, (in German)
    • F. Klaas, Expansion upsetting of tubes using internal high pressure forming, Fortschr.-Berichte VDI Reihe 2, No. 142, VDI-Verlag, Düsseldorf, 1987 (in German).
    • (1987) Fortschr.-Berichte VDI Reihe , vol.2 , Issue.142
    • Klaas, F.1
  • 37
    • 0043071665 scopus 로고
    • Theoretical basis and applications of high pressure forming
    • Dohmann F., Bieling P. Theoretical basis and applications of high pressure forming. Bleche Rohre Profile. 38(5):1991;379-385.
    • (1991) Bleche Rohre Profile , vol.38 , Issue.5 , pp. 379-385
    • Dohmann, F.1    Bieling, P.2
  • 39
    • 0000182261 scopus 로고
    • Liquid bulge forming as a flexible production method
    • Dohmann F., Hartl C. Liquid bulge forming as a flexible production method. J. Mater. Process. Technol. 45:1994;377-382.
    • (1994) J. Mater. Process. Technol. , vol.45 , pp. 377-382
    • Dohmann, F.1    Hartl, C.2
  • 40
    • 0002568774 scopus 로고    scopus 로고
    • Hydroforming components for automotive applications
    • February
    • F. Dohmann, C. Hartl, Hydroforming components for automotive applications, Fabricator (February 1998) 30-38.
    • (1998) Fabricator , pp. 30-38
    • Dohmann, F.1    Hartl, C.2
  • 41
    • 0027052181 scopus 로고
    • Pressure control in hydraulic tube forming
    • Schmoeckel D., Hessler C., Engel B. Pressure control in hydraulic tube forming. Ann. CIRP. 41(1):1992;311-314.
    • (1992) Ann. CIRP , vol.41 , Issue.1 , pp. 311-314
    • Schmoeckel, D.1    Hessler, C.2    Engel, B.3
  • 49
    • 0003336236 scopus 로고    scopus 로고
    • Determination of optimized control parameters for internal high pressure forming processes with FEM
    • E. Doege, R. Keesters, C. Rogers, Determination of optimized control parameters for internal high pressure forming processes with FEM, Sheet Metal (1998) 119-128.
    • (1998) Sheet Metal , pp. 119-128
    • Doege, E.1    Keesters, R.2    Rogers, C.3
  • 51
    • 85031533243 scopus 로고    scopus 로고
    • An introduction to recognizing potential applications and product design
    • TPA International, Detroit, MI, May
    • B. Longhouse, An introduction to recognizing potential applications and product design, in: Proceedings of the Second Annual Automotive Tube Conference, TPA International, Detroit, MI, May 1997, pp. 137-171.
    • (1997) In: Proceedings of the Second Annual Automotive Tube Conference , pp. 137-171
    • Longhouse, B.1
  • 53
    • 0343223465 scopus 로고    scopus 로고
    • Tube hydroforming: Advancement using separated forming procedures
    • Nashville, TN, September
    • M. Mason, Tube hydroforming: advancement using separated forming procedures, Brochure in THF Technology, Tube and Pipe Association, Nashville, TN, September 1996.
    • (1996) Brochure in THF Technology, Tube and Pipe Association
    • Mason, M.1
  • 54
    • 0342353962 scopus 로고    scopus 로고
    • Hydroforming of automotive components with Schaefer ASE method
    • Stuttgart, Germany, March
    • F.U. Leitloff, Hydroforming of automotive components with Schaefer ASE method, EFB-Colloquium, Stuttgart, Germany, March 1996.
    • (1996) EFB-Colloquium
    • Leitloff, F.U.1
  • 58
    • 85031530233 scopus 로고    scopus 로고
    • Innovational possibilities of internal high pressure forming with superimposed bending stresses
    • in German
    • D. Schmoeckel, P. Dick, C. Hielscher, Innovational possibilities of internal high pressure forming with superimposed bending stresses, Blech Rohre Profile 43 (1-2) (1996) 49-52 (in German).
    • (1996) Blech Rohre Profile , vol.43 , Issue.1-2 , pp. 49-52
    • Schmoeckel, D.1    Dick, P.2    Hielscher, C.3
  • 60
    • 0343659151 scopus 로고    scopus 로고
    • With water to the shape
    • in German
    • B. Viehweger, With water to the shape, Blech Rohre Profile (43) (1-2) (1996) 36-39 (in German).
    • (1996) Blech Rohre Profile , vol.43 , Issue.1-2 , pp. 36-39
    • Viehweger, B.1
  • 63
    • 49349085652 scopus 로고    scopus 로고
    • Specific design concepts for hydroforming presses
    • Stuttgart, Germany, October 12-13
    • W. Osen, Specific design concepts for hydroforming presses, in: Proceedings of the International Conference on Hydroforming, Stuttgart, Germany, October 12-13, 1999, pp. 139-148.
    • (1999) In: Proceedings of the International Conference on Hydroforming , pp. 139-148
    • Osen, W.1
  • 70
    • 0342353956 scopus 로고    scopus 로고
    • Evaluation of tube formability and material characteristics in tube hydroforming
    • The Ohio State University, Columbus, OH
    • T. Sokolowski, K. Gerke, M. Koç, M. Ahmetoglu, T. Altan, Evaluation of tube formability and material characteristics in tube hydroforming, ERC/NSM Report No. THF/ERC/NSM-98-R-025, The Ohio State University, Columbus, OH, 1998.
    • (1998) ERC/NSM Report No. THF/ERC/NSM-98-R-025
    • Sokolowski, T.1    Gerke, K.2    Koç, M.3    Ahmetoglu, M.4    Altan, T.5
  • 71
    • 85031521687 scopus 로고    scopus 로고
    • On the characteristics of tubular materials for hydroforming - Design rules, analysis and experimentation
    • accepted for publication
    • M. Koç, Y. Aueulan, T. Altan, On the characteristics of tubular materials for hydroforming - design rules, analysis and experimentation, J. Mach. Tools Manuf. (2000), accepted for publication.
    • (2000) J. Mach. Tools Manuf.
    • Koç, M.1    Aueulan, Y.2    Altan, T.3
  • 72
    • 0030735726 scopus 로고    scopus 로고
    • Comparison of free and restrained bulge forming by FEM simulation
    • M. Ahmed, M.S.J. Hashimi, Comparison of free and restrained bulge forming by FEM simulation, J. Mater. Process. Technol. (63) (1997) 651-654.
    • (1997) J. Mater. Process. Technol. , vol.63 , pp. 651-654
    • Ahmed, M.1    Hashimi, M.S.J.2
  • 75
    • 0042570870 scopus 로고    scopus 로고
    • Tribology in internal high pressure forming
    • October (in German)
    • F. Dohmann, Tribology in internal high pressure forming, Blech Rohre Profile (October 1997) 36-39 (in German).
    • (1997) Blech Rohre Profile , pp. 36-39
    • Dohmann, F.1
  • 77
    • 0030172697 scopus 로고    scopus 로고
    • Hydrofoming - A method to manufacture light-weight parts
    • Dohmann F., Hartl C. Hydrofoming - a method to manufacture light-weight parts. J. Mater. Process. Technol. 60:1996;669-676.
    • (1996) J. Mater. Process. Technol. , vol.60 , pp. 669-676
    • Dohmann, F.1    Hartl, C.2
  • 82
    • 85031522901 scopus 로고    scopus 로고
    • Bending of tubes for hydroforming: A state of the art review and analysis
    • Ohio State University, Columbus, Ohio, USA
    • A. Shr, M. Koç, M. Ahmetoglu, T. Altan, Bending of tubes for hydroforming: a state of the art review and analysis, ERC/NSM Report-99-R-1-THF Ohio State University, Columbus, Ohio, USA, 1999.
    • (1999) ERC/NSM Report-99-R-1-THF
    • Shr, A.1    Koç, M.2    Ahmetoglu, M.3    Altan, T.4


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.