Residual stresses in thermoplastic composites - a study of the literature. Part III: Effects of thermal residual stresses

Composites Part A: Applied Science and Manufacturing

Volumn 38, Issue 6, 2007, Pages 1581-1596

  Parlevliet, Patricia P ^a   Bersee, Harald E N ^a   Beukers, Adriaan ^a  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

Author keywords

A. Polymer matrix composites (PMCs); A. Thermoplastic resin; B. Defects; B. Environmental degradation; B. Fibre matrix bond; B. Mechanical properties; B. Stress relaxation; E. Filament winding

Indexed keywords

FILAMENT WINDING; LAMINATES; POLYMER MATRIX COMPOSITES; RESIDUAL STRESSES; STRESS RELAXATION; WEATHERING;

MATRIX BOND; THERMAL RESIDUAL STRESSES; THERMOPLASTIC COMPOSITES;

THERMOPLASTICS;

EID: 34147160239     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2006.12.005     Document Type: Article

References (201)

1. Parlevliet P.P., Bersee H.E.N., and Beukers A. Residual stresses in thermoplastic composites - a study of the literature - part I: formation of residual stresses. Compos Part A - Appl Sci Manuf 37 11 (2006) 1847-1857
2. Parlevliet P.P., Bersee H.E.N., and Beukers A. Residual stresses in thermoplastic composites - a study of the literature - part II: experimental techniques. Compos Part A - Appl Sci Manuf 38 3 (2007) 651-665
3. Nairn J.A., and Zoller P. Matrix solidification and the resulting residual thermal-stresses in composites. J Mater Sci 20 1 (1985) 355-367
4. Johnston N.J., Towell T.W., and Hergenrother P.M. Physical and mechanical properties of high-performance thermoplastic polymers and their composites. In: Carlsson L.A. (Ed). Thermoplastic composite materials (1991), Elsevier Science Publishers, BV, Amsterdam 27-71
5. Manson J.A.E., and Seferis J.C. Process simulated laminate (Psl) - a methodology to internal-stress characterization in advanced composite-materials. J Compos Mater 26 3 (1992) 405-431
6. Beechcraft Starship Provides Key for Composites Longevity. 2004? http://www.netcomposites.com/news.asp?2590.
7. Jones F.R. Durability of reinforced plastics in liquid environments. In: Pritchard G. (Ed). Reinforced plastics durability (1999), Woodhead Publishing Limited, Cambridge, England 91-96
8. Zahlan N., and Oneill J.M. Design and fabrication of composite components - the spring-forward phenomenon. Composites 20 1 (1989) 77-81
9. Gillespie J.W., and Chapman T.J. The influence of residual stresses on mode I interlaminar fracture of thermoplastic composites. J Thermoplast Compos Mater 6 2 (1993) 160-174
10. Nairn J.A. Residual stress effects in fracture of composites and adhesives (2003), University of Utah. http://www.eng.utah.edu/~nairn/papers/ElRSE.pdf p. 6.
11. Maheri M.R., Adams R.D., and Gaitonde J.M. The effect of temperature on the dynamic characteristics of heat-resistant thermoplastic composites. Compos Sci Technol 56 12 (1996) 1425-1434
12. Kim J.-K., and Mai Y.-W. Residual stresses. Engineered interfaces in fiber reinforced composites (1998), Elsevier Science Ltd, Oxford 308-320
13. Harris B. Residual strains. In: Harris B. (Ed). Engineering composite materials (1999), IOM Communications, London 79-83
14. Abedian A., and Szyszkowski W. Influence of the free surface on the thermal stresses in unidirectional composites. Compos Part A - Appl Sci Manuf 28 6 (1997) 573-579
15. Favre J.P. Residual thermal stresses in fibre reinforced composite materials - a review. J Mech Behavior Mater 1 1-4 (1988) 37-53
16. Meske R., and Schnack E. Stress analysis of carbon-fiber reinforced polymeric materials by means of X-ray diffraction from fillers - micromechanical model and experimental results. Ecrs 5: Proceedings of the fifth European conference on residual stresses (2000), Transtech Publications, Switzerland 217-222
17. Nairn J.A. Thermoelastic analysis of residual-stresses in unidirectional, high-performance composites. Polym Compos 6 2 (1985) 123-130
18. Zhao LG, Warrior NA, Long AC. A micromechanical study of failure and damage of unidirectional fibre-reinforced polymer matrix composites: effect of residual stress. In: Proceedings of composites Europe 2005 conference, Barcelona, Spain, October 2005. p. 6-7.
19. Karami G., and Garnich A. Micromechanical study of thermoelastic behavior of composites with periodic fiber waviness. Compos Part B - Eng 36 (2005) 241-248
20. D'Amore A., Caprino G., Nicolais L., and Marino G. Long-term behaviour of PEI and PEI-based composites subjected to physical aging. Compos Sci Technol 59 13 (1999) 1993-2003
21. Ogale A.A. Creep behavior of thermoplastic composites. In: Carlsson L.A. (Ed). Thermoplastic composite materials (1991), Elsevier Science, BV, Amsterdam 205-232
22. Adams R.D., and Singh M.M. Low temperature transitions in fibre reinforced polymers. Compos Part A - Appl Sci Manuf 32 6 (2001) 797-814
23. Huang X., Gillespie J.W., and Eduljee R.F. Effect of temperature on the transverse cracking behavior of cross-ply composite laminates. Compos Part B - Eng 28 4 (1997) 419-424
24. Warnet L. On the effect of residual stresses on the transverse cracking in cross-ply carbon-polyetherimide laminates (2000), Mechanical Engineering, University of Twente, Enschede
25. Parlevliet PP, Bersee HEN, Beukers A. Residual stresses in thermoplastic composites - a study of the literature - part I: formation of residual stresses. Compos Part A - Appl Sci Manuf, in press.
26. Harris B. Environmental effects. In: Harris B. (Ed). Engineering composite materials (1999), IOM Communications, London 261-295
27. Barnes J.A., and Byerly G.E. The formation of residual-stresses in laminated thermoplastic composites. Compos Sci Technol 51 4 (1994) 479-494
28. Cowley K.D., and Beaumont P.W.R. The measurement and prediction of residual stresses in carbon-fibre/polymer composites. Compos Sci Technol 57 11 (1997) 1445-1455
29. Unger W.J., and Hansen J.S. The effect of cooling rate and annealing on residual stress development in graphite fibre reinforced PEEK laminates. J Compos Mater 29 (1993) 108-137
30. Bradshaw R.D., and Brinson L.C. Mechanical response of linear viscoelastic composite laminates incorporating non-isothermal physical aging effects. Compos Sci Technol 59 9 (1999) 1411-1427
31. Kim H.W., Grayson M.A., and Nairn J.A. The effect of hygrothermal aging on the microcracking properties of some carbon fiber/polyimide laminates. Adv Compos Lett 4 6 (1995) 185-188
32. Burcham L.J., Vanlandingham M.R., Eduljee R.F., and Gillespie J.W. Moisture effects on the behavior of graphite/polyimide composites. Polym Compos 17 5 (1996) 682-690
33. Jones F.R. The effects of aggressive environments on long-term behaviour. In: Harris B. (Ed). Fatigue in composites (2003), Woodhead Publishing Limited, Cambridge 117-146
34. Sims G.D., and Broughton W.R. Glass fiber reinforced plastics - properties. In: Talreja R., and Manson J.A. (Eds). Polymer matrix composites (2001), Elsevier Science Ltd, Oxford 151-197
35. Smith P.A. Carbon fiber reinforced plastics - properties. In: Talreja R., and Manson J.A. (Eds). Polymer matrix composites (2001), Elsevier Science Ltd, Oxford 107-150
36. Weitsman J. Effects of fluids on polymeric composites - a review. In: Talreja R., and Manson J.A. (Eds). Polymer matrix composites (2001), Elsevier Science Ltd, Oxford 369-401
37. Cai L.W., and Weitsman Y. Non-Fickian moisture diffusion in polymeric composites. J Compos Mater 28 2 (1994) 130-154
38. Brinson L.C., and Gates T.S. Viscoelasticity and aging of polymer matrix composites. In: Talreja R., and Manson J.A. (Eds). Polymer matrix composites (2001), Elsevier Science Ltd, Oxford 333-368
39. Kriz R.D., and Stinchcomb W.W. Effects of moisture, residual thermal curing stresses, and mechanical load on the damage development in quasi-isotropic laminates. In: Reifsnider K.L. (Ed). Damage in composite materials (1982), American Society for Testing and Materials 63-80
40. Schnack E., and Meske R. Eigenspannungen bei viskoelastischen Verbundwerkstoffen (1996), Institut fuer Technische Mechanik/Festigkeitslehre Universitaet Karlsruhe, Karlsruhe, Germany p. 123
41. Weitsman Y.J. Anomalous fluid sorption in polymeric composites and its relation to fluid-induced damage. Compos Part A - Appl Sci Manuf 37 4 (2006) 617-623
42. Weitsman Y.J., and Guo Y.J. A correlation between fluid-induced damage and anomalous fluid sorption in polymeric composites. Compos Sci Technol 62 6 (2002) 889-908
43. Bradshaw R., and Brinson L.C. Mechanical response of linear viscoelastic composite laminates incorporating non-isothermal physical aging effects. Compos Sci Technol 59 (1999) 1411-1427
44. Young R.J., and Lovell P.A. Introduction to polymers (1991), Chapman & Hall, London
45. Hancox N.L. Overview of effects of temperature and environment on performance of polymer matrix composite properties. Plast Rubber Compos Process Appl 27 3 (1998) 97-106
46. Gates TS, Grayson MA. On the use of accelerated aging methods for screening high temperature polymeric composite materials. In: Proceedings of AIAA structures, dynamics and materials conference conference, St. Louis, MI, 1999. p. 925-35.
47. Parvatareddy H., Wang J.Z., Dillard D.A., Ward T.C., and Rogalski M.E. Environmental aging of high-performance polymeric composites - effects on durability. Compos Sci Technol 53 4 (1995) 399-409
48. Taylor D.M., and Lin K.Y. Aging effects on the interlaminar shear strength of high-performance composites. J Aircraft 40 5 (2003) 971-976
49. Pederson C.L., Gillespie J.W., McCullough R.L., Rothschilds R.J., and Stanek S.L. The effect of isothermal aging on transverse crack development in carbon-fiber-reinforced cross-ply laminates. Polym Compos 16 2 (1995) 154-160
50. Parvatareddy H., Tsang P.H.W., and Dillard D.A. Impact damage resistance and tolerance of high-performance polymeric composites subjected to environmental aging. Compos Sci Technol 56 10 (1996) 1129-1140
51. Parvatareddy H., Wang J.Z., Lesko J.J., Dillard D.A., and Reifsnider K.L. An evaluation of chemical aging/oxidation in high performance composites using the Vickers micro-indentation technique. J Compos Mater 30 2 (1996) 210-230
52. Key C.T., and Lua J. Constituent based analysis of composite materials subjected to fire conditions. Compos Part A - Appl Sci Manuf 37 7 (2006) 1005-1014
53. Jeronimidis G., and Parkyn A.T. Residual-stresses in carbon fiber-thermoplastic matrix laminates. J Compos Mater 22 5 (1988) 401-415
54. Wang C., and Sun C.T. Thermoelastic behavior of PEEK thermoplastic composite during cooling from forming temperatures. J Compos Mater 31 22 (1997) 2230-2248
55. Youssef Y, Denault J. Residual stresses in continuous glass fiber/polypropylene composite thermoformed parts. In: Proceedings of international SAMPE symposium Conference, 1998, p. 641-50.
56. Callister W.D.J. Materials science and engineering - an introduction (1994), John Wiley & Sons Inc
57. Wang C., and Sun C.T. Experimental characterization of constitutive models for PEEK thermoplastic composite at heating stage during forming. J Compos Mater 31 15 (1997) 1480-1506
58. Lee K., and Weitsman Y. Optimal cool down in nonlinear thermoviscoelasticity with application to graphite/PEEK (APC-2) laminates. J Appl Mech - Trans ASME 61 2 (1994) 367-374
59. Struik L. Physical ageing in amorphous polymers and other materials (1978), Elsevier Scientific Publishing Company, Amsterdam
60. Zhang Y., Xia Z., and Ellyin F. Evolution and influence of residual stresses/strains of fiber reinforced laminates. Compos Sci Technol 64 10-11 (2004) 1613-1621
61. Brinson L.C., and Gates T.S. Effects of physical aging on long-term creep of polymers and polymer matrix composites. Int J Solids Struct 32 6-7 (1995) 827-846
62. Roy S. Computer models for predicting durability. In: Pritchard G. (Ed). Reinforced plastics durability (1999), Woodhead Publishing Ltd, Cambridge, England 352-354
63. Legrand D.G. Relaxation of residual thermal-stresses and strains - effects on tensile-stress relaxation and creep. J Rheol 39 2 (1995) 437-451
64. Meijer H.E.H., and Govaert L.E. Multi-scale analysis of mechanical properties of amorphous polymer systems. Macromol Chem Phys 204 2 (2003) 274-288
65. Zhang L. Time-dependent behaviour of polymers and unidirectional polymeric composites (1995), Mechanical Engineering, Delft University of Technology, Delft
66. Tounsi A., Bedia E.A.A., and Benachour A. Stresses during moisture desorption in laminated composite plates with different degrees of anisotropy. J Thermoplast Compos Mater 18 1 (2005) 37-58
67. Akshantala N.V., and Brinson L.C. A damage evolution model for viscoelastic composite laminates. J Compos Technol Res 23 1 (2001) 3-14
68. Youssef Y., and Denault J. Thermoformed glass fiber reinforced polypropylene: microstructure, mechanical properties and residual stresses. Polym Compos 19 3 (1998) 301-309
69. Nielsen A.S., and Pyrz R. A Raman study into the effect of transcrystallisation on thermal stresses in embedded single fibres. J Mater Sci 38 3 (2003) 597-601
70. Hsiao BS, Chen EJH. Transcrystalline interphase in advanced polymer composites. In: Proceedings of controlled interphases in composite materials conference, Cleveland (OH), USA, 21-24 May 1990. p. 613-22.
71. Kim K.Y., and Ye L. Interlaminar fracture toughness of CF/PEI composites at elevated temperatures: roles of matrix toughness and fibre/matrix adhesion. Compos Part A - Appl Sci Manuf 35 4 (2004) 477-487
72. Walther B.M. An investigation of the tensile strength and stiffness of unidirectional polymer-matrix, carbon-fiber composites under the influence of elevated temperatures (1998), Engineering Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, Virginia
73. Sjogren A., Joffe R., Berglund L., and Mader E. Effects of fibre coating (size) on properties of glass fibre vinyl ester composites. Compos Part A - Appl Sci Manuf 30 8 (1999) 1009-1015
74. Li T.Q., Zhang M.Q., Zhang K., and Zeng H.M. Long-range effects of carbon fiber on crystallization of semicrystalline thermoplastics. Polymer 41 1 (2000) 161-168
75. Chen E.J.H., and Hsiao B.S. The effects of transcrystalline interphase in advanced polymer composites. Polym Eng Sci 32 4 (1992) 280-286
76. Chien M.C., and Weiss R.A. Strain-induced crystallization behavior of poly(ether ether ketone) (PEEK). Polym Eng Sci 28 1 (1988) 6-12
77. Li T.Q., Zhang M.Q., Zhang K., and Zeng H.M. The dependence of the fracture toughness of thermoplastic composite laminates on interfacial interaction. Compos Sci Technol 60 3 (2000) 465-476
78. Nielsen A.S., and Pyrz R. The effect of cooling rate on thermal residual strains in carbon/polypropylene microcomposites. Sci Eng Compos Mater 7 1-2 (1998) 1-22
79. Kugler D., and Moon T.J. Identification of the most significant processing parameters on the development of fiber waviness in thin laminates. J Compos Mater 36 12 (2002) 1451-1479
80. Bhalerao M.S. On process-induced fiber waviness in composites: theory and experiments (1996), The University of Texas at Austin, Austin (TX)
81. Iaconis JM. Process variables evaluation of PEEK APC-2 thermoplastic matrix composite. In: Proceedings of advanced materials technology'87 conference, Anaheim (CA), USA, 6-9 April 1987. p. 104-15.
82. Wisnom M.R., and Atkinson J.W. Fibre waviness generation and measurement and its effect on compressive strength. J Reinf Plast Compos 19 2 (2000) 96-110
83. Chung I., and Weitsman Y. A mechanics model for the compressive response of fiber-reinforced composites. Int J Solids Struct 31 18 (1994) 2519-2536
84. Schapery R.A. Prediction of compressive strength and kink bands in composites using a work potential. Int J Solids Struct 32 6-7 (1995) 739-765
85. Pandey M.D. Effect of fiber waviness on buckling strength of composite plates. J Eng Mech - ASCE 125 10 (1999) 1173-1179
86. Raouf R.A. A study of the effects of fiber waviness on the buckling characteristics of laminated plates. J Reinf Plast Compos 16 17 (1997) 1591-1598
87. Liggat J.J., Pritchard G., and Pethrick R.A. Temperature - its effects on the durability of reinforced plastics: physical mechanisms. In: Pritchard G. (Ed). Reinforced plastics durability (1999), Woodhead Publishing Ltd, Cambridge, England 115-125
88. Shih G.C., Tseng W.W., and Lou A.Y. Evaluation of test methods in the determination of inplane shear modulus of poly(phenylene sulfide) matrix composites. Polym Compos 15 1 (1994) 1-6
89. Filiou C., and Galiotis C. In situ monitoring of the fibre strain distribution in carbon-fibre thermoplastic composites. 1. Application of a tensile stress field. Compos Sci Technol 59 14 (1999) 2149-2161
90. Timmerman J.F., Hayes B.S., and Seferis J.C. Cure temperature effects on cryogenic microcracking of polymeric composite materials. Polym Compos 24 1 (2003) 132-139
91. Nairn J.A., and Hu S. Matrix microcracking. In: Talreja R. (Ed). Damage mechanics of composite materials (1994), Elsevier Science B.V, Amsterdam 187-243
92. Masters J.E., and Reifsnider K.L. An investigation of cumulative damage development in quasi-isotropic graphite/epoxy laminates. In: Reifsnider K.L. (Ed). Damage in composite materials (1982), American Society for Testing and Materials 40-62
93. McCartney L.N., Schoeppner G.A., and Becker W. Comparison of models for transverse ply cracks in composite laminates. Compos Sci Technol 60 12-13 (2000) 2347-2359
94. Reifsnider K.L. Damage in composite materials - summary. In: Reifsnider K.L. (Ed). Damage in composite materials (1982), ASTM 269-276
95. Gamstedt E.K., and Berglund L.A. Fatigue of thermoplastic composites. In: Harris B. (Ed). Fatigue in composites (2003), Woodhead Publishing Ltd, Cambridge 314-338
96. Nairn J.A. Matrix microcracking in composites. In: Talreja R., and Manson J.A. (Eds). Polymer matrix composites (2001), Elsevier Science Ltd, Oxford 403-432
97. Gamstedt E.K., and Talreja R. Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics. J Mater Sci 34 11 (1999) 2535-2546
98. Nairn J.A. Transverse fracture in unidirectional graphite polysulfone composites. J Compos Mater 21 9 (1987) 798-808
99. Parlevliet PP, Bersee HEN. Effects of impact modifiers on mechanical and microcracking properties of PPS composites. In: Proceedings of 25th jubilee international SAMPE Europe conference 2004 conference, Paris EXPO, Porte de Versailles, Paris, France, March 30th-April 1st, 2004. p. 539-43.
100. Parvizi A., Garret K.W., and Bailey J.E. Constrained cracking in glass fibre reinforced epoxy cross-ply laminates. J Mater Sci 13 (1978) 195-201
101. Schoeppner G.A., and Pagano N.J. Stress fields and energy release rates in cross-ply laminates. Int J Solids Struct 35 11 (1998) 1025-1055
102. Pagano N.J. Free edge stress fields in composite laminates. Int J Solids Struct 14 5 (1978) 401-406
103. Wang A.S.D., and Crossman F.W. Edge effects on thermally induced stresses in composite laminates. J Compos Mater 11 Jul (1977) 300-312
104. Cantwell W.J., Davies P., and Kausch H.H. The effect of cooling rate of deformation and fracture in IM6/PEEK composites. Compos Struct 14 2 (1990) 151-171
105. Ye L., and Friedrich K. Interlaminar fracture of commingled-fabric-based GF/PET composites. Composites 24 7 (1993) 557-564
106. Kim K.S., Hahn H.T., and Croman R.B. The effect of cooling rate on residual stresses in a thermoplastic composite. J Compos Technol Res 11 2 (1989) 47-52
107. Akshantala N.V., and Brinson L.C. Experimental study of viscoelastic effects and aging on elevated temperature damage and failure in polymer composites. Mech Time-Depend Mater 7 1 (2003) 1-19
108. Huang X.G., Gillespie J.W., and Eduljee R.F. Matrix cracking of high-performance composite laminates with variation of laminate stacking sequence and testing temperature. J Compos Technol Res 19 3 (1997) 142-151
109. Baschek G., and Hartwig G. Parameters influencing the thermal expansion of polymers and fibre composites. Cryogenics 38 1 (1998) 99-103
110. Papadopoulos DS, Bowles KJ. Use of unbalanced laminates as a screening method for microcracking. In: Proceedings of 35th international SAMPE symposium conference, Anaheim (CA), April 2-5, 1990. p. 15.
111. Shimokawa T., Katoh H., Hamaguchi Y., Sanbongi S., Mizuno H., Nakamura H., et al. Effect of thermal cycling on microcracking and strength degradation of high-temperature polymer composite materials for use in next-generation SST structures. J Compos Mater 36 7 (2002) 885-895
112. Wang S.K., Mei Z., and Chung D.D.L. Interlaminar damage in carbon fiber polymer-matrix composites, studied by electrical resistance measurement. Int J Adhes Adhes 21 6 (2001) 465-471
113. Han M.-H., and Nairn J.A. Hygrothermal aging of polyimide matrix composite laminates. Compos Part A - Appl Sci Manuf 34 10 (2003) 979-986
114. Hancox N.L. Thermal effects on polymer matrix composites: part 1. Thermal cycling. Mater Des 19 3 (1998) 85-91
115. Hsieh A.J., Schneider N.S., and Mandell J.F. Solvent stress cracking and failure mechanisms in polyetherimide composites. Polym Compos 11 4 (1990) 240-249
116. Roca M.G. Development of new thermoplastic composites (2004), Aerospace Engineering, Delft University of Technology, Delft
117. Nairn J.A. Fracture mechanics of composites with residual thermal stresses. J Appl Mech - Trans ASME 64 (1997) 804-815
118. Park C.H., and McManus H.L. Thermally induced damage in composite laminates: predictive methodology and experimental investigation. Compos Sci Technol 56 10 (1996) 1209-1219
119. McCartney L.N. Predicting transverse crack formation in cross-ply laminates. Compos Sci Technol 58 7 (1998) 1069-1081
120. McCartney L.N. Energy-based prediction of progressive ply cracking and strength of general symmetric laminates using an homogenisation method. Compos Part A - Appl Sci Manuf 36 2 (2005) 119-128
121. McCartney L.N. Physically based damage models for laminated composites. Proc Inst Mech Eng Part L - J Mater - Des Appl 217 L3 (2003) 163-199
122. Guillen J.F., and Cantwell W.J. The influence of cooling rate on the fracture properties of a thermoplastic-based fibre-metal laminate. J Reinf Plast Compos 21 8 (2002) 749-772
123. Hashin Z. Thermal-expansion coefficients of cracked laminates. Compos Sci Technol 31 4 (1988) 247-260
124. Highsmith A.L., and Reifsnider K.L. Stiffness-reduction mechanisms in composite laminates. In: Reifsnider K. (Ed). Damage in composite materials (1982), American Society for Testing and Materials, Philadelphia 103-117
125. Harris B. Transverse-ply cracking and toughness of practical reinforced plastic laminates. In: Harris B. (Ed). Engineering composite materials (1999), IOM Communications, London 179-187
126. Khatri S.C., and Koczak M.J. Thick-section AS4-graphite/E-glass/PPS hybrid composites. 1. Tensile behavior. Compos Sci Technol 56 2 (1996) 181-192
127. Mallick K, Tupper M, Arritt B, Paul C. Thermo-micromechanics of microcracking in a cryogenic pressure vessel. In: Proceedings of AIAA conference, 2003. p. 1765.
128. Ussorio M, Wang H, Ogin SL, Thorne A, Reed G. Flexural modulus reduction due to matrix cracking damage in gfrp cross-ply laminate. In: Proceedings of ICCM-14 conference, San Diego, 2003.
129. Weteringe BJ, Bersee HEN, Beukers A. Characterization of microcracking in PPS laminates. In: Proceedings of GO for the best through advanced materials & processes conference, Paris Expo, Porte de Versailles, Paris, 9-11 April 2002. p. 225-36.
130. Nairn J.A., and Hu S. The initiation and growth of delaminations induced by matrix microcracks in laminated composites. Int J Fract 57 1 (1992) 1-24
131. Joffe R., and Varna J. Analytical modeling of stiffness reduction in symmetric and balanced laminates due to cracks in 90 degrees layers. Compos Sci Technol 59 11 (1999) 1641-1652
132. Chung D.D.L. Continuous carbon fiber polymer-matrix composites and their joints, studied by electrical measurements. Polym Compos 22 2 (2001) 250-270
133. Cantwell W.J., and Morton J. The impact resistance of composite-materials - a review. Composites 22 5 (1991) 347-362
134. Gruber MB, Lamontia MA. The fabrication and performance of ring-stiffened cylinders manufactured by a comingled in situ automated thermoplastic filament winding and tape laying process. In: 25th Jubilee international SAMPE Europe conference 2004, SAMPE, Paris Expo, Porte de Versailles, Paris, 2004.
135. Nairn JA, Zoller P. The development of residual thermal stresses in amorphous and semicrystalline thermoplastic matrix composites. In: Proceedings of toughened composites conference, Houston (TX), USA, 13-15 March 1985. p. 328-41.
136. Kim B.S., Bernet N., Sunderland P., and Manson J.A. Numerical analysis of the dimensional stability of thermoplastic composites using a thermoviscoelastic approach. J Compos Mater 36 20 (2002) 2389-2403
137. Lu H.B., Schlottermuller M., Himmel N., and Schledjewski R. Effects of tape tension on residual stress in thermoplastic composite filament winding. J Thermoplast Compos Mater 18 6 (2005) 469-487
138. Schlottermuller M., Lu H., Roth Y., Himmel N., Schledjewski R., and Mitschang P. Thermal residual stress simulation in thermoplastic filament winding process. J Thermoplast Compos Mater 16 6 (2003) 497-519
139. Schlottermuller M., Schledjewski R., and Mitschang P. Influence of process parameters on residual stress in thermoplastic filament-wound parts. Proc Inst Mech Eng Part L - J Mater - Des Appl 218 L2 (2004) 157-164
140. Mei Z., and Chung D.D.L. Thermal stress-induced thermoplastic composite debonding, studied by contact electrical resistance measurement. Int J Adhes Adhes 20 2 (2000) 135-139
141. Unger WJ, Hansen JS, Ko HYS. Method of reducing residual stresses in thermoplastic laminates. European patent, USA, 1993.
142. Domb M.M., and Hansen J.S. Development of free-edge effect during processing of semicrystalline thermoplastic composites. AIAA J 32 5 (1994) 1029-1033
143. Domb M.M., and Hansen J.S. The effect of cooling rate on free-edge stress development in semi-crystalline thermoplastic laminates. J Compos Mater 32 4 (1998) 361-386
144. Unger W.J., and Hansen J.S. Method to predict the effect of thermal residual stresses on the free-edge delamination behavior of fibre reinforced composite laminates. J Compos Mater 32 5 (1998) 431-459
145. Hsueh C.-H., Lee S., and Lin H.-Y. Analyses of mode I edge delamination by thermal stresses in multilayer systems. Compos Part B - Eng 37 1 (2006) 1-9
146. Hyer M.W. Some observations on the cured shape of thin unsymmetric laminates. J Compos Mater 15 (1981) 175-194
147. Lawrence W.E., Manson J.A.E., and Seferis J.C. Thermal and morphological skin core effects in processing of thermoplastic composites. Composites 21 6 (1990) 475-480
148. Jacquemin F., Freour S., and Guillen R. Analytical modeling of transient hygro-elastic stress concentration - application to embedded optical fiber in a non-uniform transient strain field. Compos Sci Technol 66 3-4 (2006) 397-406
149. Ondurucu A., and Topcu M. Thermal residual stresses in simply supported thermoplastic laminated plates under a parabolic temperature distribution. J Thermoplast Compos Mater 19 2 (2006) 155-171
150. Trende A., Astrom B.T., and Nilsson G. Modelling of residual stresses in compression moulded glass-mat reinforced thermoplastics. Compos Part A - Appl Sci Manuf 31 11 (2000) 1241-1254
151. Sunderland P., Yu W.J., and Manson J.A. A thermoviscoelastic analysis of process-induced internal stresses in thermoplastic matrix composites. Polym Compos 22 5 (2001) 579-592
152. Wijskamp S. Shape distortions in composites forming (2005), Mechanical Engineering, Division of Design, Production and Manufacturing, University of Twente, Enschede, The Netherlands
153. Kim R.Y., and Hahn H.T. Effect of curing stresses on the first ply-failure in composite laminates. J Compos Mater 13 JAN (1979) 2-16
154. Adams DF. Current compression test methods. In: High-performance composites. 2005.
155. Pradhan B., and Panda S.K. The influence of ply sequence and thermoelastic stress field on asymmetric delamination crack growth behavior of embedded elliptical delaminations in laminated FRP composites. Compos Sci Technol 66 3-4 (2006) 417-426
156. Cowley K.D., and Beaumont P.W.R. Modelling problems of damage at notches and the fracture stress of carbon-fibre/polymer composites: matrix, temperature and residual stress effects. Compos Sci Technol 57 9-10 (1997) 1309-1329
157. Nairn J.A. Energy release rate analysis for adhesive and laminate double cantilever beam specimens emphasizing the effect of residual stresses. Int J Adhes Adhes 20 1 (2000) 59-70
158. Nairn JA. Some new variational mechanics results on composite microcracking. In: Proceedings of ICCM-10 conference, Whistler, BC, Canada, August 1995. p. I-423-30.
159. Nairn J.A. Analytical fracture mechanics analysis of the pull-out test including the effects of friction and thermal stresses. Adv Compos Lett 9 6 (2000) 373-383
160. Nairn J.A. The strain-energy release rate of composite microcracking - a variational approach. J Compos Mater 23 11 (1989) 1106-1129
161. O'Brien TK. Fatigue delamination behavior of PEEK thermoplastic composite laminates. In: Proceedings of American society for composites, first technical conference, Dayton (OH), USA, 7-9 October 1986. p. 404-20.
162. Palerosi AC, Almeida SFMd. Curvature measurements of non-symmetric laminates using image processing. In: Proceedings of ICCM-15 conference, Durban, South Africa, 2005.
163. de Almeida J.F.M., and Hansen J.S. Natural frequencies of composite plates with tailored thermal residual-stresses. Int J Solids Struct 36 23 (1999) 3517-3539
164. De Almeida JFM, Hansen JS. Enhanced buckling loads of composite plates with tailored thermal residual stresses. Institute of Mechanical Engineering, Aalborg University, Aalborg East, Denmark, 1996.
165. Jain L.K., Hou M., Ye L., and Mai Y.W. Spring-in study of the aileron rib manufactured from advanced thermoplastic composite. Compos Part A - Appl Sci Manuf 29 8 (1998) 973-979
166. Hsiao S.W., and Kikuchi N. Numerical analysis of deep drawing process for thermoplastic composite laminates. J Eng Mater Technol - Trans ASME 119 3 (1997) 314-318
167. Spencer A.J.M., Watson P., and Rogers T.G. Mathematical analysis of the springback effect in laminated thermoplastic channel sections. Compos Manuf 2 (1991) 253-258
168. Hsiao S.W., and Kikuchi N. Numerical analysis and optimal design of composite thermoforming process. Comput Methods Appl Mech Eng 177 1-2 (1999) 1-34
169. Clifford S., Jansson N., Yu W., Michaud V., and Manson J.A. Thermoviscoelastic anisotropic analysis of process induced residual stresses and dimensional stability in real polymer matrix composite components. Compos Part A - Appl Sci Manuf 37 4 (2006) 538-545
170. Jacquemin F., and Vautrin A. Analytical calculation of the transient thermoelastic stresses in thick walled composite pipes. J Compos Mater 38 19 (2004) 1733-1751
171. Kugler D., and Moon T.J. The effects of Mandrel material and tow tension on defects and compressive strength of hoop-wound, on-line consolidated, composite rings. Compos Part A - Appl Sci Manuf 33 6 (2002) 861-876
172. Mantell S.C., and Springer G.S. Manufacturing process models for thermoplastic composites. J Compos Mater 26 16 (1992) 2348-2377
173. Eduljee R.F., and Gillespie J.W. Elastic response of post- and in situ consolidated laminated cylinders. Compos Part A - Appl Sci Manuf 27 6 (1996) 437-446
174. Sala G., and Cutolo D. Heated chamber winding of thermoplastic powder-impregnated composites. 2. Influence of degree of impregnation on mechanical properties. Compos Part A - Appl Sci Manuf 27 5 (1996) 393-399
175. Casari P., Jacquemin F., and Davies P. Characterization of residual stresses in wound composite tubes. Compos Part A - Appl Sci Manuf 37 2 (2006) 337-343
176. Ganley J.M., Maji A.K., and Huybrechts S. Explaining spring-in in filament wound carbon fiber/epoxy composites. J Compos Mater 34 14 (2000) 1216-1239
177. Kim C., and White S.R. Continuous curing and induced thermal stresses of a thick filament wound composite cylinder. J Reinf Plast Compos 20 2 (2001) 166-180
178. White S.R. Processing-induced residual stresses in composites. In: Dave R., and Loos A.C. (Eds). Processing of composites (2000), Hanser Publishers, Munich 239-271
179. Hiemstra D.L., and Sottos N.R. Thermally-induced interfacial microcracking in polymer matrix composites. J Compos Mater 27 10 (1993) 1030-1051
180. Vlasveld D.P.N., Bersee H.E.N., and Picken S.J. Nanocomposite matrix for increased fibre composite strength. Polymer 46 23 (2005) 10269-10278
181. Hine P., Broome V., and Ward I. The incorporation of carbon nanofibres to enhance the properties of self reinforced, single polymer composites. Polymer 46 24 (2005) 10936-10944
182. Hsu S.L.C., Lin C.Y., and Chuang S.W. Positive-working aqueous base developable photosensitive polybenzoxazole precursor/organoclay nanocomposites. J Appl Polym Sci 97 6 (2005) 2350-2356
183. Yoon P.J., Fornes T.D., and Paul D.R. Thermal expansion behavior of nylon 6 nanocomposites. Polymer 43 25 (2002) 6727-6741
184. Agag T., Koga T., and Takeichi T. Studies on thermal and mechanical properties of polyimide-clay nanocomposites. Polymer 42 8 (2001) 3399-3408
185. Magaraphan R., Lilayuthalert W., Sirivat A., and Schwank J.W. Preparation, structure, properties and thermal behavior of rigid-rod polyimide/montmorillonite nanocomposites. Compos Sci Technol 61 9 (2001) 1253-1264
186. Tyan H.L., Liu Y.C., and Wei K.H. Thermally and mechanically enhanced clay/polyimide nanocomposite via reactive organoclay. Chem Mater 11 7 (1999) 1942-1947
187. Li M.C., Wu J.J., Loos A.C., and Morton J. A plane-strain finite element model for process-induced residual stresses in a graphite/PEEK composite. J Compos Mater 31 3 (1997) 212-243
188. Timmerman J.F., Hayes B.S., and Seferis J.C. Nanoclay reinforcement effects on the cryogenic microcracking of carbon fiber/epoxy composites. Compos Sci Technol 62 9 (2002) 1249-1258
189. Unger WJ. Reduction of free edge effect in graphite reinforced thermoplastic composites. Be, De, Fr, GB, It, Nl, Se. 1999. p. 17.
190. Potter K.D., and Weaver P.M. A concept for the generation of out-of-plane distortion from tailored FRP laminates. Compos Part A - Appl Sci Manuf 35 12 (2004) 1353-1361
191. Gigliotti M., Jacquemin F., and Vautrin A. On the maximum curvatures of 0/90 plates under thermal stress. Compos Struct 68 2 (2005) 177-184
192. Hufenbach W., and Gude M. Analysis and optimisation of multistable composites under residual stresses. Compos Struct 55 3 (2002) 319-327
193. Peeters L.J.B., Powell P.C., and Warnet L. Thermally-induced shapes of unsymmetric laminates. J Compos Mater 30 5 (1996) 603-626
194. Lee W., Myoung J.M., Yoo Y.H., and Shin H. Effect of thermal misfit stress on crack deflection at planar interfaces in layered systems. Compos Sci Technol 66 3-4 (2006) 435-443
195. Bogetti T.A., Gillespie J.W., and McCullough R.L. Influence of processing on the development of residual stresses in thick section thermoset composites. Int J Mater Prod Technol 9 1-3 (1994) 170-182
196. Bogetti T.A., Gillespie J.W., and McCullough R.L. Process-induced stress and deformation in thick-section thermoset composite laminates. J Compos Mater 26 5 (1992) 626-660
197. Huang X.G., Gillespie J.W., and Bogetti T. Process induced stress for woven fabric thick section composite structures. Compos Struct 49 3 (2000) 303-312
198. Guo Z.S., Du S.Y., and Zhang B.M. Temperature field of thick thermoset composite laminates during cure process. Compos Sci Technol 65 3-4 (2005) 517-523
199. Hsiao K.T., Little R., Restrepo O., and Minaie B. A study of direct cure kinetics characterization during liquid composite molding. Compos Part A - Appl Sci Manuf 37 6 (2006) 925-933
200. Ruiz E., and Trochu F. Multi-criteria thermal optimization in liquid composite molding to reduce processing stresses and cycle time. Compos Part A - Appl Sci Manuf 37 6 (2006) 913-924
201. Baten E.M. Microstructural variations in thick-walled anionic polyamide-6 composites (2006), Aerospace Engineering, Delft University of Technology, Delft