A new computational method for prediction of transient hygroscopic stresses during moisture desorption in laminated composite plates with different degrees of anisotropy

Journal of Thermoplastic Composite Materials

Volumn 18, Issue 1, 2005, Pages 37-58

  Tounsi, A ^a   Adda Bedia, E A ^a   Benachour, A ^a  

^a UNIVERSITY OF SIDI BEL ABBES   (Algeria)

Author keywords

Degree of anisotropy; Laminated composite plates; Moisture desorption; Polar representation method; Transient hygroscopic stresses

Indexed keywords

ANISOTROPY; CREEP; LAMINATING; MOISTURE; POLYMERS; STIFFNESS; STRESS CONCENTRATION; TEMPERATURE DISTRIBUTION;

BENKEDDAD METHOD; DEGREE OF ANISOTROPY; LAMINATED COMPOSITE PLATES; MOISTURE DESORPTION; POLAR REPRESENTATION METHOD; TRANSIENT HYGROSCOPIC STRESSES;

COMPOSITE MATERIALS;

EID: 12744258015     PISSN: 08927057     EISSN: None     Source Type: Journal    
DOI: 10.1177/0892705705041156     Document Type: Article

References (31)

1. Tounsi, A. and Adda-Bedia, E.A. (2003). Simplified Method for Prediction of Transient Hygroscopic Stresses in Polymer Matrix Composites with Symmetric Environmental Conditions, International Journal of Applied Composite Materials, 10(1), 1-18.
2. Benkeddad, A., Grediac, M. and Vautrin, A. (1996). Computation of Transient Hygroscopic Stresses in Laminated Composite Plates, Journal of Composites Science and Technology, 56: 869-876.
3. Benkeddad, A., Grediac, M. and Vautrin, A. (1995). On the Transient Hygroscopic Stresses in Laminated Composite Plates, International Journal of Composite Structures, 30(2), 201-205.
4. Tounsi, A., Adda-Bedia, E.A., Verchery, G. (2002). Influence of Anisotropy on the Transient Hygroscopic Stresses in Polymer Matrix Composites with Cyclic Environmental Conditions, International Journal of Composite Structures, 55(4), 393-405.
5. Tounsi, A. and Adda Bedia, E.A. Some Observations on the Evolution of Transversal Hygroscopic Stresses in Laminated Composites Plates: Effect of Anisotropy, International Journal of Composite Structures, 59(4), 445-454, 203.
6. eme journées nationales sur les composites, pp. 969-978, JNC12, 15, 16 et 17 Novembre 2000 (in French), France.
7. Adda-Bedia, E.A., Tounsi, A. and Sereir, Z. (2001). A Quantitative Study on the Influence of Anisotropy on the Hygrothermal Behaviour of the Laminated Composite Plates, Eighth International Conference on Composite Engineering ICCE8, p. 71, August 5-11, Tenerife, Spain.
8. Cheikh Saad Bouh, A.B. and Verchery, G. (1992). Influence of Mechanical Anisotropy on the Bending of Laminates, In: Proceedings of the Second International Symposium on Textile Composites in Building Construction (TCIBC 92) Part 2, pp. 149-162, June 23-25, Lyon, French.
9. Cheikh Saad Bouh, A.B., Aivazzadeh, S., El Sheikh, M.S. and Verchery, G. (1991). A Quantitative Study of the Influence of Anisotropy on the Bending Deformation of Laminates, 8th International Conference on Composite Materials, pp. 1-12, Honolulu (USA), Section 26-J.
10. Vincenti, A., Verchery, G. and Vannucci, P. (2001). Anisotropy and Symmetry for Elastic Properties of Laminates Reinforced by Balanced Fabrics, Composites Part A, 32(10): 1525-1532.
11. Vannucci, P. and Verchery, G. (2001). Stiffness Design of Laminates using the Polar Method, International Journal of Solids and Structures, 38: 9281-9294.
12. Verchery, G. (1999). Designing with Anisotropy - Part 1: Methods and General Results for Laminates, Keynote Lecture. 12th International Conference on Composite Materials (ICCM-12), Paris.
13. Vannucci, P. and Verchery, G. (1999). Designing with Anisotropy - Part 2: Laminates without Membrane-flexure Coupling, 12th International Conference on Composite Materials (ICCM-12), Paris.
14. Vannucci, P., Cong, X.J. and Verchery, G. (1999). Designing with Anisotropy - Part 3: Quasi-Homogeneous Anisotropic Laminates, 12th International Conference on Composite Materials (ICCM-12), Paris.
15. Vincenti, A., Verchery, G. and Vannucci, P. (2000). Découplage et quasi-homogénéité pour les stratifiés renforcés par tissus équilibrés, pp. 265-274, JNC12, (in French), France.
16. Hahn, H.T. and Kim, R.Y. (1978). Swelling of Composite Laminates, Advanced Composite Materials - Environmental Effects, ASTM STP 658, pp. 98-120.
17. Springer, G. (1981). Environmental Effects on Composite Materials, Technomic Publishing, Westport.
18. Adda-Bedia, E.A., Han, W.S. and Verchery, G. (2000). An Asymptotic Characterisation of the Moisture Diffusion in Polymer Matrix Composites with Cyclic Environmental Conditions, International Journal of Composite Structures, 49(3): 269-274.
19. Adda-Bedia, E.A., Han, W.S. and Verchery, G. (1998). Simplifed Methods for Prediction Diffusion in Polymer Matrix Composites with Cyclic Environmental Conditions, International Journal of Polymer & Polymer Composites, 6 (14), 189-203.
20. Adda-Bedia, E.A., Han, W.S. and Verchery, G. (1993). Edge Effects in Resin Matrix Composites with Cyclic Environmental Conditions, In: Miravet, A. (ed.), Proceeding of the 9th International Conference on Composite Materials, (1CCM-9), 5, 617-624.
21. Adda-Bedia, E.A., Han, W.S. and Verchery, G. (1992). Moisture Diffusion in Polymer Matrix Composites with Cyclic Environmental Conditions, Textile Composite in Building Construction (TCIBC 92), In: Proceedings of the International Symposium, Part 2, pp. 127-138, Lyon, France, (Pluralis, Paris).
22. Adda-Bedia, E.A. (1994). Méthode de Résolution Pour la Diffusion de l'Humidité sous les Conditions d'Environnement Cycliques, Doctoral Dissertation (in French), Université Claude Bernard Lyon I, Lyon, France.
23. Tsai S.W. (1988). Composite Design, 4th edn, Think Composites, Dayton.
24. Verchery, G. (1979). Les invariants des tenseurs d'ordre quatre du type de l'élasticité, In: Proceedings of the Euromech Colloquium 115, pp. 93-104, Villards-de-Lans. Editions du CNRS in 1982, Paris (in French).
25. Grédiac, M., Vautrin, A. and Verchery, G. (1993). A General Method for Data Averaging of Anisotropic Elastic Constant, International Journal of Appl. Mech., 60: 614-618.
26. Kandil, N. and Verchery, G. (1990). Design of Stacking Sequences of Laminated Plates for Thermoelastic Effects, In: De Wilde, W.P. and Blain, W.R. (eds), Proceedings of the 2nd International Conference on Computer Aided Design in Composite Materials Technology, pp. 565-576, Brussels, Computational Mechanics Publications, Southampton.
27. Verchery, G. and Vong, T.S. (1986). Une méthode d'aide graphique à la conception des sequences d'empilement dans les stratifiés, comptes rendus de JNC 5, pp. 267-280 (in French).
28. Jones, R.M. (1975). Mechanics of Composite Materials, Taylor and Francis, USA.
29. Grédiac, M. (1996). On the Direct Determination of Invariant Parameters Governing Anisotropic Plate Bending Problem, International Journal of Solids and Structure, 33(27): 3969-3982.
30. Vergnaud, J.M. (1992). Drying of Polymeric and Solid Materials: Modelling and Industrial Applications, Springer-Verlag, London.
31. Surrel, Y. and Vautrin, A. (1989). On the Modelling of the Plastic Response of FRP Under Monotonic Loading, International Journal of Composite Materials, 23: 232-250.