Hierarchical modeling of nanoindentation and microstructural evolution of face-centered cubic gold aggregates

Journal of Materials Research

Volumn 22, Issue 3, 2007, Pages 627-643

  Ma, Jeong Beom ^a   Zikry, M A ^a   Ashamwi, W M ^a   Brenner, D W ^a  

^a North Carolina State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; CRYSTAL MICROSTRUCTURE; DISLOCATIONS (CRYSTALS); FINITE ELEMENT METHOD; GRAIN SIZE AND SHAPE; MOLECULAR DYNAMICS; NANOINDENTATION;

FACE-CENTERED CUBIC GOLD AGGREGATES;

GOLD;

EID: 33947268483     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2007.0076     Document Type: Article

References (31)

1. Y.Y. Lim and M.M. Chaudhri: Nanohardness mapping of the curved surface of a spherical macroindentation in fully annealed polycrystalline oxgyen-free copper. Phys. Status Solidi A 194, 19 (2002).
2. N. Gane and F.P. Bowden: Microdeformation of solids. J. Appl. Phys. 39, 1432 (1968).
3. J.R. Greer and W.D. Nix: Size dependence of mechanical properties of gold at the sub-micron scale. Appl. Phys. A Mater. Sci. Proc. 80, 1625 (2005).
4. W.W. Gerberich, N.I. Tymiak, J.C. Grunlan, M.F. Horstemeyer, and M.I. Baskes: Interpretations of indentation size effects. J. Appl. Mech. Trans. ASME 69, 433 (2002).
5. J.F. Smith and S. Zheng: High temperature nanoscale mechanical property measurements. Surf. Eng. 16, 143 (2000).
6. T.A. Michalske and J.E. Houston: Dislocation nucleation at nanoscale mechanical contacts. Acta Mater. 46, 391 (1998).
7. J.D. Kiely and J.E. Houston: Nanomechanical properties of Au (111), (001), and (110) surfaces. Phys. Rev. B 57, 12588 (1998).
8. J.D. Kiely, K.F. Jarausch, J.E. Houston, and P.E. Russell: Initial stages of yield in nanoindentation. J. Mater. Res. 14, 2219 (1999).
9. T. Tawara, Y. Matsukawa, and M. Kiritani: Defect structure of gold introduced by high-speed deformation. Mater. Sci. Eng., A 350, 70 (2003).
10. H.G.M. Kreuzer and R. Pippan: Discrete dislocation simulation of nanoindentation. Comput. Mech. 33, 292 (2004).
11. J.D. Schall and D.W. Brenner: Atomistic simulation of the influence of pre-existing stress on the interpretation of nanoindentation data. J. Mater. Res. 19, 3172 (2004).
12. J.A. Zimmerman, C.L. Kelchner, P.A. Klein, J.C. Hamilton, and S.M. Foiles: Surface step effects on nanoindentation. Phys. Rev. Lett. 8716, 165507 (2001).
13. J. Knap and M. Ortiz: Effect of indenter-radius size on Au(001) nanoindentation. Phys. Rev. Lett. 90, 226102 (2003).
14. C.L. Kelchner, S.J. Plimpton, and J.C. Hamilton: Dislocation nucleation and defect structure during surface indentation. Phys. Rev. B 58, 11085 (1998).
15. J.A. Knapp, D.M. Follstaedt, and S.M. Myers: Evaluating micromechanical properties at surfaces using nanoindentation with finite-element modeling. Int. J. Damage Mech. 12, 377 (2003).
16. A. Hasnaoui, P.M. Derlet, and H. Van Swygenhoven: Interaction between dislocations and grain boundaries under an indenter - A molecular dynamics simulation. Acta Mater. 52, 2251 (2004).
17. L.E. Shilkrot, W.A. Curtin, and R.E. Miller: A coupled atomistic/ continuum model of defects in solids. J. Mech. Phys. Solids 50, 2085 (2002).
18. R.E. Miller, L.E. Shilkrot, and W.A. Curtin: A coupled atomistics and discrete dislocation plasticity simulation of nanoindentation into single crystal thin films. Acta Mater. 52(2), 271 (2004).
19. Y.R. Jeng and C.M. Tan: Study of nanoindentation using FEM atomic model. J. Tribol. Trans. ASME 126, 767 (2004).
20. Y. Choi, K.J. Van Vliet, J. Li, and S. Suresh: Size effects on the onset of plastic deformation during nanoindentation of thin films and patterned lines. J. Appl. Phys. 94, 6050 (2003).
21. R. Phillips, D. Rodney, V. Shenoy, E. Tadmor, and M. Ortiz: Hierarchical models of plasticity: Dislocation nucleation and interaction. Modell. Simul. Mater. Sci. Eng. 7. 769 (1999).
22. S. Suresh, T.G. Nieh, and B.W. Choi: Nano-indentation of copper thin films on silicon substrates. Scripta Mater. 41, 951 (1999).
23. E.T. Lilleodden, J.A. Zimmerman, S.M. Foiles, and W.D. Nix: Atomistic simulations of elastic deformation and dislocation nucleation during nanoindentation. J. Mech. Phys. Solids 51, 901 (2003).
24. Y. Matsukawa, K. Yasunaga, M. Komatsu, and M. Kiritani: Dynamic observation of dislocation-free plastic deformation in gold thin foils. Mater. Sci. Eng., A 350, 8 (2003).
25. M.A. Zikry and M. Kao: Inelastic microstructural failure mechanisms in crystalline materials with high angle grain boundaries. J. Mech. Phys. Solids 44, 1765 (1996).
26. W.M. Ashmawi and M.A. Zikry: Void nucleation and grain-boundary interfacial properties in ductile materials. Philos. Mag. A 83, 391 (2003).
27. M.A. Zikry: An accurate and stable algorithm for high strain-rate finite strain plasticity. Comput. Struct. 50, 337 (1994).
28. M.M. McCann and S.G. Corcoran: Nanoindentation behavior of gold single crystals, in Thin Films-Stresses and Mechanical Properties X, edited by S.G. Corcoran, Y-C. Joo, N.R. Moody, and Z. Suo (Mater. Res. Soc. Symp. Proc. 795, Warrendale, PA, 2004), p. U8.30.1.
29. T. Kameda and M.A. Zikry: Intergranular and transgranular crack growth at triple junction boundaries in ordered intermetallics. Int. J. Plast. 14, 689 (1998).
30. X.D. Li, P. Nardi, C.W. Baek, J.M. Kim, and Y.K. Kim: Direct nanomechanical machining of gold nanowires using a nanoindenter and an atomic force microscope. J. Micromech. Microeng. 15, 551 (2005).
31. S.G. Corcoran, R.J. Colton, E.T. Lilleodden, and W.W. Gerberich: Anomalous plastic deformation at surfaces: Nanoindentation of gold single crystals. Phys. Rev. B 55, 16057 (1997).