Predictive modeling and optimization of turning operations with complex grooved cutting tools for curled chip formation and chip breaking

Machining Science and Technology

Volumn 4, Issue 3, 2000, Pages 399-443

  Jawahir, I S ^a   Balaji, A K ^a  

^a UNIVERSITY OF KENTUCKY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CUTTING TOOLS; GENETIC ALGORITHMS; MATHEMATICAL MODELS; NONLINEAR PROGRAMMING; OPTIMIZATION;

COMPLEX GROOVED TOOLS; FLAT FACED TOOLS;

TURNING;

EID: 0034479951     PISSN: 10910344     EISSN: None     Source Type: Journal    
DOI: 10.1080/10940340008945717     Document Type: Article

References (62)

1. Armarego, E.J.A., Jawahir, I.S., Ostafiev, V.A. and Patri K. Venuvinod, "Modeling of Machining Operations," CIRP Working Group Paper, STC-C, Paris, France (1996).
2. Armarego, E.J.A., "Predictive Modeling of Machining Operations - A Means of Bridging the Gap Between Theory and Practice," Keynote Paper, CSME Forum, Hamilton, ON, Canada (1996).
3. Jawahir, I.S., Balaji, A.K., Stevenson, R. and van Luttervelt, C.A., "Towards Predictive Modeling and Optimization of Machining Operations," ASME Keynote Paper, Manuf. Science and Engineering, Dallas, TX, USA (1997) 3-12.
4. van Luttervelt, C. A., Childs, T.H.C., Jawahir, I.S., Klocke, F. and Venuvinod, P.K., "Present Situation and Future Trends in Modeling of Machining Operations," Annals of the CIRP, 47 (1998) 587-626.
5. th CIRP General Assembly, Tianjin, P.R. China (1997).
6. van Luttervelt, C. A., "The Importance of Suitable Models for Machining Operations to Improve Machine Tool Performance," Proc. Int. Seminar on Improving Machine Tools, San Sebastian, Spain (1998) 545-555.
7. van Luttervelt, C.A. and Peng, J., "Symbiosis of Modeling and Sensing to Improve the Accuracy of Workpieces in Small Batch Machining Operations," Int. J. Adv. Manuf. Tech., 15 (1999) 699-710.
8. Jawahir, I.S., Balaji, A.K., Rouch, K.E. and Baker, J.R., "Towards Integration of Hybrid Models for Optimized Machining Performance in Intelligent Manufacturing Systems," Int. Manuf. Conference in China, Hong Kong (2000).
9. Jawahir, I.S., Balaji, A.K. and Stevenson, R., (Editors), Proc. Modeling of Machining Operations, CIRP International Workshop, Atlanta, GA, USA (1998).
10. Venuvinod, P.K., "Computer-Based Literature Database on Modeling of Machining," CIRP Working Group on Modeling of Machining Operations (1998).
11. Young, H.T., Mathew, P., and Oxley, P.L.B., "Allowing for Nose Radius Effects in Predicting the Chip Flow Direction and Cutting Forces in Bar Turning," Proc. Inst. Mech. Engrs., 201(C3) (1987) 213-226.
12. Wang, J. and Mathew, P., "Development of a General Tool Model for Turning Operations based on a Variable Flow Stress Theory," Int. J. of Machine Tools & Manuf., 35(1) (1995) 71-90.
13. Arsecularatne, J.A., Mathew, P., and Oxley, P.L.B., "Prediction of Chip Flow Direction and Cutting Forces in Oblique Machining with Nose Radius Tools," Proc. Inst. Mech. Eng., Part B, 209 (1995) 305-315.
14. Armarego, E.J.A. and Samaranayake, P., "Performance Prediction Models for Turning with Rounded Corner Plane Faced Lathe Tools. I. Theoretical Development, II. Verification of Models," Machining Science and Technology, 3(2) (1999) 143-200.
15. Jawahir, I.S., "An Experimental and Theoretical Study of the Effects of Tool Restricted Contact on Chip Breaking," Ph.D. Thesis, The University of New South Wales, Australia (1986).
16. Arsecularatne, J.A. and Oxley, P.L.B., "Prediction of Cutting Forces in Machining with Restricted Contact Tools," Machining Science and Technology, 1(1) (1998) 95-112.
17. nd CIRP Int. Workshop on Modeling of Machining Operations, Nantes, France (1999) 160-180.
18. Balaji, A.K., Sreeram, G., Jawahir, I.S., Lenz. E., "The Effects of Cutting Tool Thermal Conductivity on Tool-Chip Contact Length and Cyclic Chip Formation in Machining with Grooved Tools," Annals of the CIRP, 48(1) (1999) 33-38.
19. Balaji A.K., Jawahir, I.S., "Effects of Cutting Parameters on Chip Side-Curl Mechanisms and Variable Tool-Chip Contact in Turning," Proc. ASME, Symp. Machining Sc. & Tech., MED-10 (1999) 311-318.
20. Nakayama, K., "Chip Control in Metal Cutting," Bull. Japan. Soc. of Prec. Eng., 18(2) (1984) 97-103.
21. Ghosh, R., Redetzky, M., Balaji, A.K., Jawahir, I.S., "The Equivalent Toolface (ET) Approach for Modeling Chip Curl in Machining with Grooved Tools," Proc. CSME Forum, (1996) 702-711.
22. Fang, N., I.S. Jawahir, and P.L.B. Oxley, "A Universal Slip-line Model With Non-unique Solutions for Machining With Curled Chip Formation and a Restricted Contact Tool," Int. J. of Mechanical Sciences, (2000) (Accepted for publication).
23. Fang, N., and I.S. Jawahir, "Prediction and Validation of Chip Up-curl in Machining Using the Universal Slip-line Model," Trans. NAMRC XXVIII, (2000) 137-142.
24. Fang, N., and I. S. Jawahir, "Analytical Predictions and Experimental Validation of the Universal Slip-line Field for Restricted Contact Machining," Paper submitted to the International Journal of Machine Tools and Manufacture, (2000).
25. Fang, N., and I. S. Jawahir, "Prediction of Chip Back-flow Angles in Restricted Contact Machining with Grooved Tools Using the Universal Slip-line Model," Proc. ASME 2000 International Mechanical and Engineering Congress and Exposition, November 5-10, Orlando, Florida (2000).
26. Shi, T., and S. Ramalingam, "Modeling Chip Formation with Grooved Tools," Int. J. Mech. Sci., 35 (1993) 741-756.
27. Dewhurst, P., "On the Non-uniqueness of the Machining Process," Proc. of R. Soc. Lond., Series A, 360 (1978) 587-610.
28. Kudo, H., "Some New Slip-line Solutions for Two-dimensional Steady-state Machining, Int. J. Mech. Sci., 7 (1965) 43-52.
29. Johnson, W., "Some Slip-line Fields for Swaging or Expanding Indenting, Extruding and Machining for Tools with Curved Dies," Int. J. of Mech. Sci., 4 (1962) 323-347.
30. Usui, E., and Hoshi, K., "Slip-line Fields in Metal Machining Which Involve Centered Fans," Prodn. Engg. Res. Conf. ASME, Pittsburgh (1963) 61-71.
31. Lee, E.H. and Shaffer, B.W., "Theory of Plasticity Applied to a Problem of Machining," Applied Mechanics, 18 (1951) 405-413.
32. Merchant, M.E., "Basic Mechanism of Metal Cutting Process," Applied Mechanics, 11 (1944) A168-175.
33. Powell, M.J.D., "A Fortran Subroutine for Solving Systems of Non-linear Algebraic Equations," in: Rabinowitz, Numerical Methods for Nonlinear Algebraic Equations, Gordon and Breach, London (1970).
34. Dewhurst, P., and Collins, I.F., "A Matrix Technique Constructing Slip-line Field Solutions to a Class of Plane Strain Plasticity Problems," Int. J. for Num. Meth. in Eng., 7 (1973) 357-378.
35. Hill, R., "The Mechanics of Machining: A New Approach," J. Mech. Phy. Soli., 3 (1954) 47-53.
36. Hill, R., "On the state of stress in a plastic-rigid body at the yield point," Phil. Mag., 42 (1951) p868.
37. Hill, R., "On the Limits Set by Plastic Yielding to the Intensity of Singularities of Stress," J. Mech. Phy. Soli., 2 (1954) 278-285.
38. Jawahir, I.S., and C.A. van Luttervelt, "Recent Development in Chip Control Research and Applications," Annals of the CIRP, 42 (1993) 659-693.
39. Pekelharing, A.J., "Why and How does the Chip Curl and Break," Annals of the CIRP, 12(1) (1964) 144-147.
40. Nakayama, K., "Origins of Side Curl of Chip in Metal Cutting," Bulletin JSPE, 6(3) (1972) 99-101.
41. th All India Machine Tool Design Research Conf., Bangalore (1973) 235-242.
42. Shaw, M.C., Thurman, A.L. and Ahlgren, H.J., "A Plasticity Problem involving Plane-Strain and Plane-Stress Simultaneously: Groove Formation in the Machining of High Temperature Alloys," ASME J. of Eng. For Ind., May (1966) p142.
43. Nakayama, K., "Basic Rules on the Form of Chip in Metal Cutting," Annals of the CIRP, 27(1) (1978) 17-21.
44. Nakayama, K. and Arai, M., "Comprehensive Chip Form Classification Based on the Cutting Mechanism," Annals of the CIRP, 41(1) (1992) 71-74.
45. van Luttervelt, C.A. and Pekelharing, A.J., "Chip Formation in Machining Operations on Small Diameters," Annals of the CIRP, (1976) 71-76.
46. Kluft, W., Konig, W., van Luttervelt, C.A., Nakayama, K., and Pekelharing, A.J., "Present Knowledge of Chip Control," keynote Paper, Annals of the CIRP, 28(2) (1979) 441-455.
47. Ghosh, R., Dillon, O.W. and Jawahir, I.S., "An Investigation of 3D Curled Chip in Machining - Part 1: A Mechanics-Based Analytical Model," J. Machining Sci. & Tech., 2(1) (1998)91-116.
48. Nakayama, K., "A Study on Chip Breaker," Bull. JSME, (1962) 142-150.
49. Balaji, A.K., "An Experimental and Theoretical Study of Variable Tool-Chip Interfacial Friction and Cyclic Chip Formation in Machining with Flat-Faced and Grooved Tools," Ph.D. Thesis, University of Kentucky, USA (2000).
50. Jawahir, I.S., O.W. Dillon, A.K. Balaji, M. Redetzky, and N. Fang, "Predictive Modeling of Machining Performance in Turning Operations," J. Machining Science and Technology, 2 (1998) 253-276.
51. Fang, X.D., Jawahir, I.S., "An Analytical Model for Cyclic Chip Formation in 2-D Machining with Chip Breaking," Annals of the CIRP, 45/1 (1996) 53-58.
52. Jawahir, I.S., Zhang, J.P., "An Analysis of Chip Curl Development, Chip Deformation and Chip Breaking in Orthogonal Machining," Trans. NAMRI/SME, 23 (1995) 109-114.
53. Wang, L., Saito, K. and Jawahir, I. S., "Infrared Temperature Measurement of Curled Chip Formation in Metal Machining," Trans. NAMRI, XXIV, (1996) 87-92.
54. Wang, L., "An Investigation of Temperature Effects on Curled Chip Formation in Metal Machining," Ph.D. Thesis, University of Kentucky, USA (1996).
55. Jawahir, I.S., "The Tool Restricted Contact Effect as a Major Influencing Factor in Chip Breaking: An Experimental Analysis," Annals of the CIRP, 37(1) (1998) 121-126.
56. Jawahir, I.S., "On the Controllability of Chip Breaking Cycles and Modes of Chip Breaking in Metal Machining," Annals of the CIRP, 39(1) (1990) 47-51.
57. Jawahir, I.S. and Fei, J., "A Comprehensive Evaluation of Tool Inserts for Chip Control Using Fuzzy Modeling of Machinability Parameters," Trans. NAMRI, XXI, (1993) 205-213.
58. Lin, M., Ghosh, R. and Jawahir, I.S., "An Intelligent Technique for Predictive Assessment of Chip Breakability in Turning Operations for Use in CAPP Systems," Proc. IPMM'97, Australisia-Pacific Forum on Intelligent Processing & Manuf. of Materials, 2 (1997) 1311-1320.
59. Da, Z.J., J.P. Sadler, X.D. Fang, and I.S. Jawahir, "Optimum Machining Performance in Finish Turning with Complex Grooved Tools," Manufacturing Science and Engineering, MED-Vol. 2-1/MH-Vol. 3-1 ASME (1995) 703-714.
60. Da, Z.J., J.P. Sadler, and I.S. Jawahir, "Predicting Optimum Cutting Conditions for Turning Operations at Varying Tool-Wear States," Transactions of NAMRI/SME, XXV, (1997) 75-80.
61. Da, Z.J., Sadler, J.P., and Jawahir, I.S., "A New Performance-Based Criterion for Optimum Cutting Conditions and Cutting Tool Selection in Finish Turning," Trans. NAMRI/SME, XXVI, (1998) 129-134.
62. Fang, X.D. and Jawahir, I.S., "The Effects of Progressive Tool-Wear and Tool Restricted Contact on Chip Breakability in Machining," Wear, 160 (1993) 243-252.