Pole piece effect on improvement of magnetic controllability for noncontact micromanipulation

IEEE Transactions on Magnetics

Volumn 43, Issue 2, 2007, Pages 533-542

  Khamesee, Mir Behrad ^a   Shameli, Ehsan ^a  

^a UNIVERSITY OF WATERLOO   (Canada)

Author keywords

Magnetic control; Magnetic devices; Magnetic levitation; Mechatronics; Microelectromechanical systems; Micromanipulation; Microrobotics

Indexed keywords

COMPUTER SIMULATION; ELECTROMAGNETISM; MAGNETIC LEVITATION; MAGNETIC VARIABLES CONTROL; MECHATRONICS; MICROELECTROMECHANICAL DEVICES; MOBILE ROBOTS;

FOCAL POINT; MAGNETIC CONTROL; MICROROBOTICS; POLE PIECE EFFECT;

MICROMANIPULATORS;

EID: 33846623802     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2006.887058     Document Type: Article

References (31)

1. A. V. Filatov and E. H. Maslen, "Passive magnetic bearing for flywheel energy storage systems," IEEE Trans. Magn., vol. 37, no. 6, pp. 3913-3924, Nov. 2001.
2. M. Komori and C. Shiraishi, "A levitated motor with superconducting magnetic bearings assisted by self-sensing AMBs," IEEE Trans. Appl. Supercond., vol. 13, no. 2, pp. 2189-2192, Jun. 2003.
3. S. C. Mukhopadhyay, T. Ohji, M. Iwahara, and S. Yamada, "Modeling and control of a new horizontal-shaft hybrid-type magnetic bearing," IEEE Trans. Ind. Electron., vol. 47, no. 1, pp. 100-108, Feb. 2000.
4. S. C. Mukhopadhyay, J. Donaldson, G. Sengupta, S. Yamada, C. Chakraborty, and D. Kacprzak, "Fabrication of a repulsive-type magnetic bearing using a novel arrangement of permanent magnets for vertical-rotor suspension," IEEE Trans. Magn., vol. 39, no. 5, pp. 3220-3222, Sep. 2003.
5. C. Bonivento, L. Gentili, L. Marconi, and R. Naldi, "Robust regulation for a magnetic levitation system," in Proc. 42nd IEEE Conf. Decision and Control, Dec. 2003, vol. 5, pp. 4499-4504.
6. Q. Kun-Xi, Z. Pei, R. Wei-Min, and Y. Hai-Yu, "Novel magnetic spring and magnetic bearing," IEEE Trans. Magn., vol. 39, no. 1, pp. 559-561, Jan. 2003.
7. B. Unger and R. Hollis, "Design and operation of a force-reflecting magnetic levitation coarse-fine teleoperation system," in Proc. 2004 IEEE Int. Conf. Robotics and Automation, May 2004, vol. 4, pp. 4147-4152.
8. C. E. Lin and C. K. Yang, "Force and moment calibration for NCKU 10 cm × 10 cm magnetic suspension wind tunnel," in Proc. IEEE Instrumentation and Measurement Technology Conf., May 2004, vol. 2, pp. 1060-1065.
9. M. R. smith, Y. M. Eyssa, and S. W. Van Scivrr, "Design of a superconducting magnetic suspension system for a liquid helium flow experiment," IEEE Trans. Appl. Supercond., vol. 7, no. 2, pp. 382-385, Aug. 1996.
10. R. Boom, Y. Eyssa, G. McIntosh, M. Abdelsalam, R. Scurlock, Y. Wu, M. Goodyer, K. Balcerek, J. Eskins, and C. Britcher, "Superconducting electromagnets for large wind tunnel magnetic suspension and balance systems," IEEE Trans. Magn., vol. MAG-21, no. 2, pp. 444-447, Mar. 1985.
11. S. E. Salcudean, N. M. Wong, and R. L. Hollis, "Design and control of a force-reflecting teleoperation system with magnetically levitated master and wrist," IEEE Trans. Robot. Autom., vol. 11, no. 6, pp. 844-858, Dec. 1995.
12. T. Nakagawa, M. Hama, and T. Furukawa, "Study of magnetic levitation technique applied to steel plate production line," IEEE Trans. Magn., vol. 36, no. 5, pp. 3686-3689, Sep. 2000.
13. S. J. Kwang and S. B. Yoon, "Contact-free moving-magnet type of micropositioner with optimized specification," IEEE Trans. Magn., vol. 38, no. 3, pp. 1539-1548, May 2002.
14. W. J. Kim and D. L. Trumper, "High-precision magnetic levitation stage for photolithography," J. Precis. Eng., vol. 22, pp. 66-77, 1998.
15. M. Holmes, R. Hocken, and D. L. Trumper, "Long-range scanning stage: A novel platform for scanned-probe microscopy," J. Precis. Eng., vol. 24, no. 3, pp. 191-209, 2000.
16. K. Won-Jong, D. L. Trumper, and J. H. Lang, "Modeling and vector control of planar magnetic levitator," IEEE Trans. Ind.. Appl., vol. 34, no. 6, pp. 1254-1262, Dec. 1998.
17. O. Tsukamoto, K. Yasuda, and J. Z. Chen, "A new magnetic levitation system with AC magnets," IEEE Trans. Magn., vol. 24, no. 2, pp. 1497-1500, Mar. 1988.
18. K. H. Park, K. Y. Ahn, S. H. Kim, and Y. K. Kwak, "Wafer distribution system for a clean room using a novel magnetic suspension technique," IEEE/ASME Trans. Mechatronics, vol. 3, no. 1, pp. 73-78, Mar. 1998.
19. T. Morizane, N. Kimura, and K. Taniguchi, "Simultaneous control of propulsion and levitation of linear induction motor in a novel Maglev system," in Proc. 3rd Int. Power Electronics and Motion Control Conf., Aug. 2000, vol. 1, pp. 127-131.
20. I. Y. A. Wang, S. H. Li, and I. Busch-Vishniac, "A magnetic levitation transport path," IEEE Trans. Semicond. Manuf., vol. 4, no. 2, pp. 145-154, May 1991.
21. M. Y. Chen, M. J. Wang, and L. C. Fu, "Dual-axis Maglev guiding system modeling and controller design for wafer transportation," in Proc. 38th IEEE Conf. Decision and Control, Dec. 1999, vol. 3, pp. 2623-2628.
22. M. B. Khamesee, N. Kato, and Y. Nomura, "Design and control of a microrobotic system using magnetic levitation," IEEE/ASME Trans. Mechatronics, vol. 7, no. 1, pp. 1-14, Mar. 2002.
23. H. E. Knoepfel, Magnetic Fields, A Comprehensive Theoretical Treatise for Practical Use. New York: Wiley, 2000.
24. S. Kiener, "Eddy current in bodies with sharp edges by the MMP method," IEEE Trans. Magn., vol. 26, no. 2, pp. 482-485, Mar. 1990.
25. E. M. Deeley, "Avoiding surface impedance modification in BE methods by singularity-free representations," IEEE Trans. Magn., vol. 28, no. 5, pp. 2814-2816, Sep. 1992.
26. E. M. Deeley and J. Xiang, "The use of modified surface impedance in a minimum-order boundary element method," IEEE Trans. Magn., vol. 26, no. 5, pp. 2762-2764, Sep. 1992.
27. S. Kato and M. Kobayashi, "Magnetic charge densities around edges of circular cylinders," IEEE Trans. Magn., vol. 32, no. 3, pp. 1880-1887, May 1996.
28. T. Nakamura and M. B. Khamesee, "A prototype mechanism for three-dimensional levitated movement of a small magnet," IEEE/ASME Trans. Mechatronics, vol. 32, no. 1, pp. 41-50, Mar. 1997.
29. E. Pardo, D. X. Chen, and A. Sanchez, "Demagnetizing factors for square bars," IEEE Trans. Magn., vol. 40, no. 3, pp. 1491-1498, May 2004.
30. N. Soda, M. Kobayashi, and G. Rowlands, "Charge densities and inclination angles of magnetization on various surfaces of rotational symmetry," IEEE Trans. Magn., vol. 40, no. 4, pp. 1763-1768, Jul. 2004.
31. E. Shameli, D. G. Craig, and M. B. Khamesee, "Design and implementation of a magnetically suspended microrobotic pick-and-place system," J. Appl. Phys., vol. 99, p. 08P509, 2006.