A watch in developments of intelligent tire inspection and monitoring

2005 IEEE International Conference on Vehicular Electronics and Safety Proceedings

Volumn 2005, Issue , 2005, Pages 333-338

  Li, Li ^a,b   Wang, Fei Yue ^a,b,c   Zhou, Qunzhi ^c  

^a IEEE   (United States)

^b University of Arizona   (United States)

^c INSTITUTE OF GEOLOGY AND GEOPHYSICS   (China)

Author keywords

Driving safety; Intelligent tire; Intelligent vehicle; Surface acoustic wave (SAW) sensors

Indexed keywords

DRIVING SAFETY; INTELLIGENT TIRES; SURFACE ACOUSTIC WAVE (SAW) SENSORS;

ACOUSTIC SURFACE WAVE DEVICES; FRICTION; NOISE ABATEMENT; SENSORS; TIRES;

INTELLIGENT VEHICLE HIGHWAY SYSTEMS;

EID: 33846023706     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/ICVES.2005.1563668     Document Type: Conference Paper

References (74)

1. Tyre Pressure Sensor Markets, III-Vs Review, vol. 16, no. 6, pp. 9, 2003.
2. Federal Motor Vehicle Safety Standards; Tire Pressure Monitoring Systems; Controls and Displays, National Highway Traffic Safety Administration, US Department of Transportation, 2004.
3. M. Kowalewski, "Monitoring and managing tire pressure," IEEE Potentials, vol. 23, no. 3, pp. 8-10, 2004.
4. F. S. Conant, "Tire temperature," Rubber Chemistry and Technology, vol. 44, pp. 398-409, 1971.
5. C. Clark, K. Meardon, and D. Russell, Scrap Tire Technology and Markets, Park Ridge, NJ: Noyes Data, 1993.
6. Highway Traffic Noise in the United States - Problem and Response, Federal Highway Administration, US Department of Transportation, 2000.
7. F.-Y. Wang, G.-S. Shan, and L. Li, et. al, "The research of smart tire and correlative core techniques," Tire Industry Sinica, vol. 22, no. 12, pp. 713-719, 2002.
8. R. J. Grogan, "The effect of tyre deflation on vehicle behaviour," Journal of Forensic Science Society, vol. 12, pp. 285-302, 1972.
9. Li, L., F.-Y. Wang, and G. Shan, et. al, "Design of tire fault observer based on estimation of tire/road friction conditions," Automatica Sinica, vol. 28, no. 5, pp. 689-694, 2003.
10. J. Wang, L. Alexander, R. Rajamani, "Friction estimation on highway vehicles using longitudinal measurements," ASME Journal of Dynamic Systems, Measurement, and Control, vol. 126, no. 2, pp: 265-275, 2004.
11. J. Stephant, A. Charara, and D. Meizel, "Virtual sensor: application to vehicle sideslip angle and transversal forces," IEEE Transactions on Industrial Electronics, vol. 51, no. 2, pp: 278-289, 2004.
12. Li, L., F.-Y. Wang, and Q. Zhou, "Integrated longitudinal and lateral tire/road friction modeling and monitoring for vehicle motion control," IEEE Transactions on Intelligent Transportation Systems, 2005.
13. Surface Texture for Asphalt and Concrete Pavements, U.S. Department of Transportation, Federal Highway Administration, Technical Advisory T5040.36, 2005.
14. F. S. Conant, G. L. Hall and J. D. Walter, "Surface temperature of running tires using infrared scanning," SAE# 700475, pp. 1-6, 1970.
15. N. M. Trivisionno, "Thermal analysis of a rolling tire," SAE#700474, pp. 1-5, 1970.
16. Z. Zhao, Y. Li, and Q. Wang, et. al, "Application of infrared thermometer in testing of temperature field for a rolling tire," Proceedings of the IEEE International Vehicle Electronics Conference, pp. 98-101, 1999.
17. Y.-J. Lin and S.-J. Hwang, "Temperature prediction of rolling tires by computer simulation," Mathematics and Computers in Simulation, vol. 67, no. 3, pp. 235-249, 2004.
18. O. Bennerhult, "Acoustical and mechanical impedances of road surfaces and the influence on tire noise," Proceedings of International Tire Noise Conference, pp. 185-197, 1979.
19. U. Sandberg and G. Descomet, "Road surface influence on tire/road noise," Internoise, pp. 259-272, 1980.
20. U. Sandberg, "Tyre/road noise-myths and realities," Proceedings of the Internoise, pp. 35-56, 2001.
21. K. Seid, S. Shin, and T. Tabaru, "Analysis of wavelet correlation between tyre sounds and tread patterns," Proceedings of IEEE Networking, Sensing and Control Conference, pp. 241-246, 2005.
22. J. III Downs, P. Zhang, and M. L. Peterson, "A high-speed high-resolution ultrasonic inspection machine," IEEE/ASME Transactions on Mechatronics, vol. 4, no. 3, pp. 301-311, 1999.
23. N. W. Tschoegl, The Phenomenological Theory of Linear Viscoelastic Behavior, New York: Springer-Verlag, 1989.
24. M. Snow, "Laser triangulation sensors in the tire industry," Sensors Magazine, vol. 19, no. 3, 2002.
25. F. Gustafsson, M. Drevo, and U. Forssell, et. al, "Virtual sensors of tire pressure and road friction," SAE# 2001-01-0796, 2001.
26. M. Hill and J. D. Turner, "Automotive tyre pressure sensing," Proceedings of IEE Colloguium on Automotive Sensors, vol. 5, pp. 1-6, 1992.
27. C. Kolle, W. Scherr, and D. Hammerschmidt, et. al, "Ultra low-power monolithically integrated, capacitive pressure sensor for tire pressure monitoring," Proceedings of IEEE Sensors, vol.1, pp. 244-247, 2004.
28. R. Grossman, J. Michel, and T. Sachs, et. al, "Measurement of mechanical, quantities using quartz sensors," Proceedings of IEE European Frequency and Time Forum Conference, pp. 376-381, 1996.
29. G. Scholl, F. Schmidt, and T. Ostertag, et. al, "Wireless passive SAW sensor systems for industrial and domestic applications," Proceedings of the IEEE International Frequency Control Symposium, pp. 595-601, 1998.
30. L. Reindl, G. Scholl, and T. Ostertag, et. al, "Theory and application of passive SAW radio transponders as sensors," IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 45, no. 5, pp. 1281-1292, 1998.
31. B. Drafts, "Acoustic Wave Technology Sensors," Sensors Magazine, vol. 17, no. 10, 2000.
32. A. Pohl, "A review of wireless SAW sensors," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, vol. 47, no. 2, pp. 317-332, 2000.
33. C. C. W. Ruppel and T. A. Fjeldly, Advances in Surface Acoustic Wave Technology, Systems and Applications, World Scientific Co., Singapore, vol. 1&2, 2001.
34. W.-E. Bulst, G. Fischerauer, and L. Reindl, "State of the art in wireless sensing with surface acoustic waves," IEEE Transactions on Industrial Electronics, vol. 48, no. 2, pp. 265-271, 2001.
35. L. M. Reindl, A. Pohl, and G. Scholl, et. al, "SAW-based radio sensor systems," IEEE Sensors Journal, vol. 1, no. 1, pp. 69-78, 2001.
36. B. De Geeter, O. Nys, and M. Chevroulet, et. al, "A wireless tyre pressure and temperature monitoring system," Proceedings Sensor Expo Conference, pp. 61-63, 1996.
37. W. Buff, M. Rusko, and E. Goroll, "Universal pressure and temperature SAW sensor for wireless applications," Proceedings of IEEE Ultrasonics Symposium, vol. 1, pp. 359-362, 1997.
38. A. Pahl, G. Ostermayer, and L. Reindl, et. al, "Monitor the tire pressure at cars using passive SAW sensors." Proceedings of IEEE Ultrasonics Symposium, pp. 471-474, 1997.
39. A. Pohl and F. Seifert, "Wirelessly interrogable surface acoustic wave sensors for vehicular applications," IEEE Transactions on Instrumentation and Measurement, vol. 46, no. 4, pp. 1031-1038, 1997.
40. W. Buff and S. Klelt, "Passive remote sensing for temperature and pressure using SAW resonator devices," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 45, no. 5, pp. 1388-1392, 1998.
41. A. Pohl and L. Reindl, "Measurement of physical parameters of car tires using passive SAW sensors," Proceedings of the 2nd Conference on Advanced Microsystems for Automotive Applications, pp. 249-262, 1998.
42. R. Grossmann, "Quartz crystals as remote sensors for tire pressure," Proceedings of IEEE Instrumentation and Measurement Technology Conference, vol. 3, pp. 1745-1749, 1999.
43. A. Pohl, R. Steindl, and L. Reindl, "The 'intelligent tire' utilizing passive SAW sensors measurement of tire friction," IEEE Transactions on Instrumentation and Measurement, vol. 48, no. 6, pp. 1041-1046, 1999.
44. G. Schimetta, F. Dollinger, and G. Scholl, "Wireless pressure and temperature measurement using a SAW hybrid sensor," Proceedings of IEEE Ultrasonics Symposium, vol. 1, pp. 445-448, 2000.
45. H. Wunderlich, G. Hettich, and M. Klein, et. al, "Concepts and steps in the development of wireless sensors and actuators for automotive applications," Proceedings of Sensor 99, part 2, pp. 157-162, 1999.
46. J. D. Turner and L. Austin, "Sensors for automotive telematics," Measurement Science and Technology, vol. 11, pp. R58-R79, 2000.
47. G. Schimetta, F. Dollinger, and R. Weigel, "A wireless pressure measurement system using a SAW hybrid sensor," IEEE Transactions on Microwave Theory and Techniques, vol. MTT-48, no. 12, pp. 2730-2735, 2000.
48. A. Stelzer, G. Schimetta, and L. Reindl, et. al, "Wireless SAW-sensors for surface and subsurface sensing applications," Proceedings of SPIE's 46th Annual Meeting, International Conference on Subsurface Sensing Technologies and Applications III, SPIE Proceedings Series, vol. 4491, 2001.
49. X. Zhang, F. Wang, and Z. Wang, "Intelligent tires based on wireless passive surface acoustic wave sensors," Proceedings of IEEE Conference on Intelligent Transportation Systems, pp. 960-964, 2004.
50. S. Basat, K. Lim, and I. Kim, et. al, "Design and development of a miniaturized embedded UHF RFID Tag for automotive tire applications," Proceedings of IEEE Electronic Components and Technology Conference, pp. 867-870, 2005.
51. E. Tonuk and Y. S. Unlusoy, "Prediction of automobile tire cornering force characteristics by finite element modeling and analysis," Computer and Structures, vol. 79, no. 13, pp. 1219-1232, 2001.
52. R. B. Ward, "Temperature coefficients of SAW delay and velocity for Y-Cut and rotated LiNb03," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 31, no. 5, pp. 481-483, 1990.
53. R. M. Taziev and E. A. Kolosqvsky, "Deformation-sensitive cuts for surface acoustic waves in α -quartz," Proceedings of IEEE International Frequency Control Symposium, pp.660-664, 1993.
54. R. M. Taziev, E. A. Kolosovsky, and A. S. Kozlov, "Pressure- sensitive cuts for surface acoustic waves in α -quartz," IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, vol. 42, no. 5, pp. 845-849, 1995.
55. W. Ma and W. Shi, "Temperature-sensitive cuts far surface acoustic wave in Quartz," IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, Vol. 48, no.1, pp. 333-335, 2001.
56. G. Schimetta, F. Dollinger, and G. Scholl, "Optimized design and fabrication of a wireless pressure and temperature sensor unit based on SAW transponder technology," IEEE MTT-S International Microwave Symposium Digest, vol. 1, pp. 355-358, 2001.
57. X. Zhang, F.-Y. Wang, and L. Li, "Optimal selection of Piezoelectric substrates and crystal cuts for SAW-based pressure and temperature sensors," to appear
58. P. Michelberger and D. Szoke, "Speed walking beam model, quarter car model dependent vertical vibrations of elastic vehicle bodies," International Journal of Vehicle Design, vol. 8, no. 1, pp. 87-95, 1985.
59. H. Mayer, "Model based detection of tyre deflation by estimation of a virtual transfer function," Proceedings of IEEE Conference on Control Applications, pp. 285-290, 1995.
60. T. Umeno, K. Asano, and H. Ohashi, et. al, "Pneumatic monitor for a vehicle based on the disturbance observer," Proceedings of IEEE Industry Applications Conference, Thirty-First IAS Annual Meeting, vol. 3, pp. 1687-1691, 1996.
61. T. Umeno, K. Asano, and H. Ohashi, et. al, "Observer based estimation of parameter variations and its application to tyre pressure diagnosis," Control Engineering Practice, vol. 9, no. 6, pp. 639-645, 2001.
62. C. Halfmann, M. Ayoubi and H. Holzmann, "Supervision of vehicles' tyre pressures by measurement of body accelerations," Control Engineering Practice, vol. 5, no. 8, pp. 1151-1159, 1997.
63. L. Li, F.-Y. Wang, and G. Shan, "Automatic tire pressure fault monitor using wavelet-based probability density estimation," Proceedings of IEEE Intelligent Vehicles Symposium, pp. 80-84, 2003.
64. H.-G. Jun, T. R. Way, and B. Lofgren, et. al, "Dynamic load and inflation pressure effects on contact pressures of a forestry forwarder tire," Journal of Terramechanics, vol. 41, no. 4, pp. 209-222, 2004.
65. U. D. Perdok and W. B. M. Arts, "The performance of agricultural tyres in soft soil conditions," Soil and Tillage Research, vol. 10, no. 4, pp. 319-330, 1987,
66. C. W. Fervers, "Improved FEM simulation model for tire-soil interaction," Journal of Terramechanics, vol. 41, no. 2-3, pp. 87-100, 2004.
67. V. Magori, V. R. Magori, and N. Seitz, "On-line determination of tyre deformation, a novel sensor principle," Proceedings of IEEE Ultrasonics Symposium, vol. 1, pp. 485-488, 1998.
68. M. Sergio, N. Manaresi, and M. Tartagni, et. al, "On road tire deformation measurement system using a capacitive-resistive sensor," Proceedings of IEEE Sensors, vol. 2, pp. 1059-1063, 2003.
69. R. Marsili, "Measurement of the dynamic normal pressure between tire and ground using PVDF piezoelectric films," IEEE Transactions on Instrumentation and Measurement, vol. 49, no. 4, pp. 736-740, 2000
70. S. Yamamoto, O. Nakao, and H. Nishimura, "Touch mode capacitive pressure sensor for passive tire monitoring system," Proceedings of IEEE Sensors, vol. 2, pp. 1582-1586, 2002.
71. M. Brandt, V. Bachmann, and A. Vogt, "Highly sensitive AlGaAs/GaAs position sensors for measurement of tyre tread deformation," Electronics Letters, vol. 34, no. 8, pp. 760-762, 1998.
72. O. Yilmazogiu, M. Brandt, and J. Sigmund, et. al, "Integrated InAs/GaSb 3D magnetic field sensors for 'the intelligent tire'," Sensors and Actuators A: Physical, vol. 94, no. 1-2, pp.59-63, 2001.
73. H. Mayer, "Comparative diagnosis of tyre pressures," Proceedings of IEEE Conference on Control Applications, vol. 1, pp. 627-632, 1994.
74. M. Durresi, A. Durresi, and L. Barolli, "Sensor inter-vehicle communication for safer highways," Proceedings of International Conference on Advanced Information Networking and Applications, vol. 2, pp. 599-604, 2005.