Sixty years of EHL

Lubrication Science

Volumn 18, Issue 4, 2006, Pages 265-291

  Spikes, H A ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTER SIMULATION; INTEGRAL EQUATIONS; LAPTOP COMPUTERS; MATHEMATICAL MODELS; PRESSURE MEASUREMENT; PROBLEM SOLVING; SURFACE ROUGHNESS; TEMPERATURE MEASUREMENT;

FILM THICKNESS; NUMERICAL MODELLING; ROLLING CONTACTS; SLIDING CONTACTS;

ELASTOHYDRODYNAMIC LUBRICATION;

EID: 33750533968     PISSN: 09540075     EISSN: None     Source Type: Journal    
DOI: 10.1002/ls.23     Document Type: Review

References (166)

1. Cameron A. Righting a 40-year-old wrong. A. M. Eitel - the true author of 'Grubin ehl' solution. Tribology International 1985; 18:82.
2. Von Mohrenstein-Ertel A. Die Berechnung der hydrodynamischen Schmierung gekrümmter Oberflächen unter hoher Belastung und Relativbewegung (OR Lang, P Oster, eds). Fortschrittsberichte VDI, Ser. 1, No. 115. VDI Verlag: Düsseldorf. 1984. First published in 1945 in Russian under the name A. M. Ertel.
3. Grubin AN, Vinogradova IE. Investigation of the Contact of Machine Components, Book No. 30 (in Russian). Central Scientific Research Institute for Technology and Mechanical Engineering: Moscow, 1949. DSIR Trans. No. 337.
4. Cameron A. Written discussion on Session VII. Elastohydrodynamics '96 (Dowson D et al., eds). Elsevier: Amsterdam, 1997; 720-721.
5. Dowson D. Elastohydrodynamic and microelastohydrodynamic lubrication. Wear 1995; 190:125-138.
6. Dowson D, Ehret P. Past, present and future studies in elastohydrodynamics. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1999; 213:317-333.
7. Hamrock BJ, Dowson D. Ball Bearing Lubrication. The Elastohydrodynamics of Elliptical Contacts. John Wiley & Sons, Inc.: New York, 1981.
8. Gohar R. Elastohydrodynamics, 2nd edition. Imperial College Press: London, 2001.
9. Martin HM. Lubrication of gear teeth. Engineering 1916; 102:119-121.
10. Peppler W. Druckübertragung an geschmiert zylindrischen Gleit und Walzflächen. VDI Verlag: Berlin, 1938.
11. Gatcombe EK. Lubrication characteristics of involute spur gears - a theoretical investigation. Transactions of the ASME 1945; 67:177-185.
12. Petrusevitch AI. Fundamental conclusions from the contact-hydrodynamic theory of lubrication. Izvestiya Akademii Nauk SSSR (OTN) 1951; 2:209-233. MOD Trans. No. 293.
13. Dowson D, Higginson GR. A numerical solution to the elastohydrodynamic problem. Journal of Mechanical Engineering Science 1959; 1:6-15.
14. Dowson D, Higginson GR. Elastohydrodynamic Lubrication, SI edition. Pergamon Press: Oxford, 1977.
15. Lane TB, Hughes JR. A study of the oil film formation in gears by electrical resistance measurements. British Journal of Applied Physics 1952; 3:315-318.
16. MacConochie IO, Cameron A. The measurement of oil film thickness in gear teeth. Transactions of the ASME, Journal of Basic Engineering 1960; 82D:29-34.
17. Cheng HS, Sternlicht B. A numerical solution for the pressure, temperature and film thickness between two infinitely long, lubricated rolling and sliding cylinders under heavy loads. Transactions of the ASME, Journal of Basic Engineering 1965; 87:695-797.
18. Cheng HS. A refined solution of the thermal-elastohydrodynamic lubrication of rolling and sliding cylinders. ASLE Transactions 1965; 8:397-410.
19. Fowles PE. Application of elastohydrodynamic lubrication theory to individual asperity-asperity collisions. Transactions of the ASME, Journal of Lubrication Technology 1969; 91:464-476.
20. rd September 1965.
21. rd September 1965.
22. Crook AW. The lubrication of rollers, II. Film thickness with relation to viscosity and speed. Philosophical Transactions of the Royal Society of London A 1961 ; 254:223-236.
23. Archard JF, Kirk MT. Lubrication at point contacts. Proceedings of the Royal Society of London A 1961; 261:532-550.
24. Kirk MT. Hydrodynamic lubrication of 'perspex'. Nature 1962; 194:965-966.
25. Gohar R, Cameron A. Optical measurement of oil film thickness under elastohydrodynamic lubrication. Nature 1963; 200:458-459.
26. Cameron A, Gohar R. Theoretical and experimental studies of the oil film in lubricated point contact. Proceedings of the Royal Society of London A 1966; 291:520-536.
27. Foord CA, Hammann WC, Cameron A. Evaluation of lubricants using optical elasto-hydrodynamics. ASLE Transactions 1968; 11:31-43.
28. Crook AW. The lubrication of rollers, IV. Measurements of friction and effective viscosity. Philosophical Transactions of the Royal Society of London A 1963; 255:281-312.
29. Smith FW. The effect of temperature in concentrated contact lubrication. ASLE Transactions 1962; 5:142-148.
30. Plint MA. Traction in elastohydrodynamic contacts. Proceedings of the Institution of Mechanical Engineers 1967-68; 182:300-306.
31. Johnson KL, Cameron R. Shear behaviour of elastohydrodynamic oil films at high rolling contact pressures. Proceedings of the Institution of Mechanical Engineers 1967-68; 182:307-319.
32. Ranger AP, Ettles CMM, Cameron A. Solution of the point contact elastohydrodynamic problem. Proceedings of the Royal Society of London A 1973; 346:227-244.
33. Hamrock BJ, Dowson D. Isothermal elastohydrodynamic lubrication of point contacts. Part I. Theoretical formulation. Transactions of the ASME, Journal of Lubrication Technology 1976; 98:223-229.
34. Hamrock BJ, Dowson D. Isothermal elastohydrodynamic lubrication of point contacts. Part II. Ellipticity parameter results. Transactions of the ASME, Journal of Lubrication Technology 1976; 98:375-383.
35. Hamrock BJ, Dowson D. Isothermal elastohydrodynamic lubrication of point contacts. Part III. Fully flooded results, Transactions of the ASME, Journal of Lubrication Technology 1977; 99:264-276.
36. Hamrock BJ, Dowson D. Isothermal elastohydrodynamic lubrication of point contacts. Part IV. Starvation results. Transactions of the ASME, Journal of Lubrication Technology 1977; 99:15-23.
37. Vakilzadeh V, Gohar R. Oil-film starvation in elastohydrodynamic circular contacts. Journal of Mechanical Engineering Science 1977; 19:22-29.
38. Johnson KL, Greenwood JA, Poon SY. A simple theory of asperity contact in elastohydrodynamic lubrication. Wear 1972; 19:91-108.
39. Patir N, Cheng HS. An average flow model for determining effects of three dimensional roughness on partial hydrodynamic lubrication. Transactions of the ASME, Journal of Lubrication Technology 1978; 100:2-17.
40. Johnson KL. Regimes of elastohydrodynamic lubrication. Journal of Mechanical Engineering Science 1970; 12:9-16.
41. Hamrock BJ, Dowson D. Minimum film thickness in elliptical contacts for different regimes of fluid film lubrication. Elastohydrodynamic Lubrication and Related Topics (Dowson D et al., eds). Mechanical Engineering Publications: London, 1979.
42. Wymer DG, Cameron A. Elastohydrodynamic lubrication of a line contact. Proceedings of the Institution of Mechanical Engineers 1974; 188:221-238.
43. Wedeven LD, Evans D, Cameron A. Optical analysis of ball bearing starvation. Transactions of the ASME, Journal of Lubrication Technology 1971; 93:349-361.
44. Jackson A, Cameron A. An interferometric study of the EHL of rough surfaces. ASLE Transactions 1976; 19:50-60.
45. Hamaguchi H, Spikes HA, Cameron A. Elastohydrodynamic properties of water in oil emulsions. Wear 1977; 43:17-24.
46. Wedeven LD. Optical Measurements of Elastohydrodynamics in Rolling-Contact Bearings. PhD thesis, University of London, 1970.
47. Johnson KL, Tevaarwerk JL. Shear behaviour of elastohydrodynamic films. Proceedings of the Royal Society of London A 1972; 356:215-238.
48. Johnson KL, Roberts AD. Observations of viscoelastic behaviour of an elastohydrodynamic lubricant film. Proceedings of the Royal Society of London A 1974; 337:217-242.
49. Hirst W, Moore AJ. Elastohydrodynamic lubrication at high pressures. II. Non-Newtonian behaviour. Proceedings of the Royal Society of London A 1979; 365:537-565.
50. Bair S, Winer WO. Shear strength measurement of lubricants at high pressure. Transactions of the ASME, Journal of Lubrication Technology 1979; 101:251-257.
51. Bair S, Winer W. A rheological model for elastohydrodynamic contacts based on primary laboratory data. Transactions of the ASME, Journal of Lubrication Technology 1979; 101:258-265.
52. Aushermann VK, Nagaraj HS, Sanborn DM, Winer WO. Infrared temperature mapping in elastohydrodynamic lubrication. Transactions of the ASME, Journal of Lubrication Technology 1976; 98:236-243.
53. Nagaraj HS, Sanborn DM, Winer WO. Direct surface temperature measurement by infrared radiation in elastohydrodynamic contacts and the correlation with the Blok flash temperature theory. Wear 1978; 49:43-59.
54. Conry TF, Wand S, Cusano C. A Reynolds-Eyring equation for elastohydrodynamic lubrication in line contacts. Transactions of the ASME, Journal of Tribology 1987; 109:648-654.
55. Houpert LG, Hamrock BJ. Fast approach for calculating film thicknesses and pressures in elastohydrodynamically lubricated contacts at high loads. Transactions of the ASME, Journal of Tribology 1988; 108:411-420.
56. Lubrecht AA. The Numerical Solution of the Lubricated Line- and Point Contact Problem Using Multigrid Techniques. PhD Thesis, University of Twente, 1987.
57. Lubrecht AA, Venner CH, ten Napel WE, Bosma R. Film thickness calculations in elastohydrodynamically lubricated circular contacts using a multigrid method. Transactions of the ASME, Journal of Tribology 1988; 110:503-507.
58. Crook AW. Developments in elastohydro-dynamic lubrication. Journal Institute of Petroleum 1963; 49:295-305.
59. Mokhtar MOA, Abdel Ghany AA. Elastohydrodynamic behaviour of rolling elliptical contacts. Part I: Pressure, temperature distributions. Transactions of the ASME, Journal of Tribology 1985; 107:343-351.
60. Safa MMA. Elastohydrodynamic Studies Using Thin Film Transducers. PhD Thesis, Imperial College, University of London, 1982.
61. Safa MMA, Gohar R. Pressure distribution under a ball impacting a thin lubricant layer. Transactions of the ASME, Journal of Tribology 1986; 108:372-376.
62. Johns-Rahnejat PM, Gohar R. Measuring contact pressure distributions under elastohydrodynamic point contacts. Tribotest 1994; 1:33-53.
63. Lauer JL, Ahn Y-J. Lubricants and lubricant additives under shear studied under operating conditions by optical and infrared spectroscopic methods. Tribology Transactions 1988; 31:120-127.
64. Gardiner DJ, Baird E, Gorvin AC, Marshall WE, Dare-Edwards MP. Raman spectra of lubricants in elastohydrodynamic entrapments. Wear 1983; 91:111-114.
65. Gardiner DJ, Baird E, Craggs C. Raman microspectroscopy of a working elasto-hydrodynamic contact. Lubrication Science 1989; 1:301-313.
66. Cann PM, Spikes HA. In lubro studies of lubricants in EHD contacts using FTIR absorption spectroscopy. STLE Transactions 1991; 34:248-256.
67. Venner CH, ten Napel WE. Multilevel solutions of the elastohydrodynamically lubricated circular contact. Part 1. Theory and numerical algorithm. Wear 1992; 152:351-367.
68. Venner CH, ten Napel WE. Multilevel solutions of the elastohydrodynamically lubricated circular contact. Part 2. Smooth surface results. Wear 1992; 152:369-381.
69. Venner CH, Lubrecht AA. Multilevel Methods in Lubrication. Elsevier: Amsterdam, 2000.
70. Evans HP, Hughes TG. Evaluation of deflection in semi-infinite bodies by a differential method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2000; 214:563-584.
71. Hughes TG, Elcoate CD, Evans HP. Coupled solution of the elastohydrodynamic line contact problem using a differential deflection method. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2000; 214:585-598.
72. Ai X, Cheng HS. A transient EHL analysis for line contacts with measured roughness using multigrid technique. Transactions of the ASME, Journal of Tribology 1994; 116:549-558.
73. Venner CH, Lubrecht AA. Numerical analysis of waviness on the film thickness if a circular contact. Transactions of the ASME. Journal of Tribology 1996; 118:153-161.
74. Hooke CJ. Surface roughness modification in EHL line contacts operating in the piezoviscous regime. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1998; 212:145-162.
75. Spikes HA. The borderline of elastohydrodynamic and boundary lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2000; 214:23-37.
76. Johnston GJ, Wayte R, Spikes HA. The measurement and study of very thin lubricant films in concentrated contacts. Tribology Transactions 1991; 34:187-194.
77. Gustafsson L, Höglund E, Marklund O. Measuring lubricant film thickness with image analysis. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1994; 208:199-205.
78. Cann PH, Hutchinson J, Spikes HA. The development of a Spacer Layer Imaging Method (SLIM) for mapping elastohydrodynamic contacts. Tribology Transactions 1996; 39:915-921.
79. Hartl M, Krupka I, Liska M. Differential colorimetry: a tool for evaluation of chromatic interference patterns. Optical Engineering 1997; 36:1-8.
80. Guangteng G, Spikes HA. Boundary film formation by lubricant base fluids. Tribology Transactions 1996; 39:448-454.
81. Smeeth M, Gunsel S, Spikes HA. Boundary film formation by viscosity index improvers. Tribology Transactions 1996; 39:726-734.
82. Anghel V, Bovington C, Spikes HA. Thick film formation by friction modifier additives. Lubrication Science 1999; 11:313-335.
83. Spikes HA, Ratoi M. Molecular scale liquid lubricating films. Thinning Films and Tribological Interface (Dowson D et al., eds). Elsevier: Amsterdam, 2000.
84. Hu Y-Z, Zhu D. A full numerical solution to the mixed lubrication in point contacts. Transactions of the ASME, Journal of Tribology 2000; 122:1-9.
85. Zhao J, Sadeghi F, Hoeprich MH. Analysis of EHL circular contact start up: Part I. Mixed contact model with pressure and film thickness results. Transactions of the ASME, Journal of Tribology 2001; 123:67-74.
86. Holmes MJA, Evans HP, Snidle RW. Analysis of mixed lubrication effects in simulated gear tooth contacts. Transactions of the ASME, Journal of Tribology 2005; 127:61-69.
87. Popovici G, Venner CH, Lugt PM. Effect of load system dynamics on the film thickness in EHL contacts during start up. Transactions of the ASME, Journal of Tribology 2004; 126:258-266.
88. Zhao J, Sadeghi F. Analysis of EHL circular contact shut down. Transactions of the ASME, Journal of Tribology 2003; 125:76-90.
89. Jacod B, Lugt PM, Dumont ML, Tripp JH, Venner CH. Amplitude reduction of waviness in elastohydrodynamic lubrication using an Eyring fluid model. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2000; 214:343-350.
90. Wang QJ, Zhu D. Virtual texturing: modeling the performance of lubricated contact of engineering surfaces. Transactions of the ASME, Journal of Tribology 2005; 127:722-728.
91. Guangteng G, Cann PM, Olver AV, Spikes HA. An experimental study of film thickness between rough surfaces in EHL contact. Tribology International 2000; 33:183-189.
92. Choo JW, Glovnea RP, Olver AV, Spikes HA. The effects of three-dimensional model surface roughness features on lubricant film thickness in EHL contacts. Transactions of the ASME, Journal of Tribology 2003; 125:533-542.
93. Glovnea RP, Spikes HA. Elastohydrodynamic film formation at the start-up of the motion. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2001; 215:125-138.
94. Glovnea RP, Spikes HA. Behaviour of EHL films during reversal of entrainment in cyclically accelerated/decelerated motion. Tribology Transactions 2002; 45:177-184.
95. Chiu YP, Sibley LB. Contact shape and non-Newtonian effects in elastohydrodynamic point contacts. Lubrication Engineering 1972; 28:48-60.
96. Kaneta M, Nishikawa H, Kameishi K, Sakai T, Ohne N. Effects of elastic moduli of contact surfaces in elastohydrodynamic lubrication. Transactions of the ASME, Journal of Tribology 1992; 144:75-80.
97. Yagi K, Kyogoku K, Nakahara T. Mechanism of dimple formation under elastohydrodynamic conditions. Tribological Research and Design for Engineering Systems (Dowson D et al., eds). Elsevier: Amsterdam, 2004; 111-120.
98. Dwyer-Joyce RS, Drinkwater BW, Donohoe CJ. The measurement of lubricant-film thickness using ultrasound. Proceedings of the Royal Society of London A 2003; 459:957-796.
99. Cann PM, Spikes HA. The measurement of pressure distribution in EHL - development method and application in dry, static contact. Tribology Transactions 2005; 48:474-483.
100. 2 and 149°C. ASLE Transactions 1975; 18:249-262.
101. Dyson A, Wilson AR. Film thicknesses in elastohydrodynamic lubrication by silicone fluids. Proceedings of the Institution of Mechanical Engineers 1965-66; 180:97-112.
102. Bair S. Shear thinning correction for rolling/sliding elastohydrodynamic film thickness. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2005; 219:69-74.
103. Bair S, Winer WO. A simple formula for EHD film thickness of non-Newtonian liquids. Elastohydrodynamics '96 (Dowson D et al., eds). Elsevier: Amsterdam, 1997; 235-241.
104. Evans HP, Snidle RW. Inverse solution of Reynolds' equation of lubrication under point-contact elastohydrodynamic conditions. Transactions of the ASME, Journal of Lubrication Technology 1981; 103:539-546.
105. Elcoate CD, Evans HP, Hughes TG. On the coupling of the elastohydrodynamic problem. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1998; 212:307-318.
106. Liu SB, Wang Q, Liu G. A versatile method of discrete convolution and FFT (DC-FFT) for contact analyses. Wear 2000; 243:101-110.
107. Okamura H. A contribution to the numerical analysis of isothermal elastohydrodynamic lubrication. Tribology of Reciprocating Engines (Dowson D et al., eds). Butterworths: Guildford, 1982; 313-320.
108. Dowson D, Wang D. An analysis of the normal bouncing of a solid elastic ball on an oily plate. Wear 1994; 179:29-37.
109. Bair S, Qureshi F, Winer WO. Observations of shear localization in liquid lubricants under pressure. Transactions of the ASME, Journal of Tribology 1993; 115:507-514.
110. Bair S, McCabe C. A study of mechanical shear bands in liquids at high pressures. Tribology International 2004; 37:783-789.
111. Evans CR, Johnson KL. The rheological properties of elastohydrodynamic lubricants. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1986; 200:303-312.
112. Evans CR, Johnson KL. Regimes of traction in elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1986; 200:313-324.
113. Muraki M, Dong D. Derivation of basic theological parameters from experimental lubrication traction curves of low viscosity lubricants. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1999; 213:53-61.
114. ASME Research Committee on Lubrication. Pressure Viscosity Report. Viscosity and Density of over 40 Lubricating Fluids of Known Composition at Pressures to 150000psi and Temperatures to 425°F. ASME: New York, 1953.
115. Kuss E, Taslimi M. p, V, T-Messungen an zwanzig organischen Flüssigkeiten. Chemie Ingenieur Technik 1970; 42:1073-1081.
116. So BY, Klaus EE. Viscosity-pressure correlation of liquids. ASLE Transactions 1980; 23:409-421.
117. Yasutomi S, Bair S, Winer WO. An application of a free volume model to lubricant rheology I. Dependence of viscosity on pressure and temperature. Transactions of the ASME, Journal of Tribology 1984; 106:291-303.
118. Bair S. Pressure-viscosity behavior of lubricants to 1.4 GPa and its relation to EHL traction. Tribology Transactions 2000; 43:91-99.
119. Gold PW, Schmidt A, Dicke H, Loos J, Assmann C. Viscosity-pressure- temperature behaviour of mineral and synthetic oils. Journal of Synthetic Lubrication 2001; 18:51-79.
120. Bair S. The variation of viscosity with temperature and pressure for various real lubricants. Transactions of the ASME, Journal of Tribology 2001; 123:433-436.
121. Bair S, Winer WO. Shear strength measurements of lubricants at high pressure. Transactions of the ASME, Journal of Tribology 1979; 101:251-261.
122. Bair S, Winer WO. Some observations in high pressure rheology of lubricants. Transactions of the ASME, Journal of Tribology 1982; 104:357-364.
123. Bair S, Winer WO. The high shear stress rheology of liquid lubricants at pressures of 2 to 200 MPa. Transactions of the ASME, Journal of Tribology 1991; 114:1-13.
124. Bair S. The nature of the logarithmic traction gradient. Tribology International 2002; 35:591-597.
125. Bair S. Discussion: 'Quantitative comparisons between measured and solved EHL dimples in point contacts' (Yang P, Kaneta M, Masuda S, 2003, ASME Journal of Tribology 125:210-214),
126. Transactions of the ASME, Journal of Tribology 2005; 127:456.
127. Bair S. Discussion: 'Modeling of film thickness and traction in variable ratio traction drive rig' (Sharif KJ, Evans HP, Snidle RW, Newall JP, ASME Journal of Tribology 126:92-104),
128. Transactions of the ASME, Journal of Tribology 2005; 127:458.
129. Bair S, Winer WO, Qureshi F. Lubricant rheological properties at high pressure. Lubrication Science 1993; 5:189-203.
130. Bair S. Measurement of real non-Newtonian response for liquid lubricants under moderate pressures. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2001; 215:223-233.
131. Bair S, Qureshi F. The generalised Newtonian fluid model and elastohydrodynamic film thickness. Transactions of the ASME, Journal of Tribology 2003; 125:70-75.
132. Guangteng G, Spikes HA. The control of friction by molecular fractionation of base fluid mixtures at metal surfaces. Tribology Transactions 1997; 40:461-469.
133. Elrod HD. A review of theories of the fluid dynamic effects of roughness in laminar lubricating films. Surface Roughness Effects in Lubrication (Dowson D et al., eds). MEP: London, 1978; 11-26.
134. Cheng HS. The lubrication of rough surfaces. Mixed Lubrication and Lubricated Wear (Dowson D et al., eds). Butterworths, London, 1985; 11-20.
135. Spikes HA. Mixed lubrication - an overview. Lubrication Science 1997; 9:221-253.
136. Zhu D, Hu Y-Z. Effects of rough surface topography and orientation on the characteristics of EHD and mixed lubrication in both circular and elliptical contacts. Tribology Transactions 2001; 44:391-398.
137. Holmes MJA, Evans HP, Hughes TO, Snidle RW. Transient elastohydrodynamic point contact analysis using a new coupled differential deflection method Part 2: Results. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2003; 217:305-321.
138. Wang W-Z, Liu Y-C, Wang H, Hu Y-Z. A computer thermal model of mixed lubrication in point contact. Transactions of the ASME. Journal of Tribology 2004; 126:162-170.
139. Holmes MJA, Evans HP, Snidle RW. DISCUSSION-Elastohydrodynamic lubrication in extended parameter ranges part II: load effect, published in: Tribology Transactions 2003; 46:282-288.
140. Venner CH. EHL film thickness computations at low speeds: the risk of artificial trends as a result of poor accuracy and implications for mixed lubrication modelling. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2005; 219:285-289.
141. Kaneta M, Cameron A. Effects of asperities in elastohydrodynamic lubrication. Transactions of the ASME, Journal of Lubrication Technology 1980; 102:374-379.
142. Kaneta M, Nishikawa H. The effects of a transversely oriented bump on point contact EHL in reciprocating motion with a small stroke length. Lubrication at the Frontier (Dowson D et al., eds). Elsevier: Amsterdam, 1999.
143. Guangteng G, Cann PM, Olver AV, Spikes HA. Lubricant film thickness in rough surface, mixed elastohydrodynamic contact. Transactions of the ASME, Journal of Tribology 2000; 122:65-76.
144. Glovnea RP, Choo JW, Olver AV, Spikes HA. Compression of a single transverse asperity in an EHD contact. Transactions of the ASME, Journal of Tribology 2003; 125:275-282.
145. Félix-Quiñones A, Ehret P, Summers JL. New experimental results of a single ridge passing through an EHL conjunction. Transactions of the ASME, Journal of Tribology 2003; 125:253-259.
146. Choo JW, Glovnea RP, Olver AV, Spikes HA. The effects of three-dimensional model surface roughness features on lubricant film thickness in EHL contacts. Transactions of the ASME, Journal of Tribology 2003; 125:533-542.
147. Spikes HA, Olver AV. Basics of mixed lubrication. Lubrication Science 2003; 16:3-28.
148. Venner CH, Lubrecht AA. Amplitude reduction of non-isotropic harmonic patterns in circular EHL contacts under pure rolling. Lubrication at the Frontier (Dowson D et al., eds). Elsevier: Amsterdam, 1999.
149. Hooke CJ, Venner CH. Surface roughness attenuation in line and point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 2000; 214:439-444.
150. Tao J, Hughes TG, Evans HP, Snidle RW. Elastohydrodynamic response of transverse ground gear teeth. Boundary and Mixed Lubrication (Dowson D et al., eds). Elsevier: Amsterdam, 2002; 447-458.
151. Mobil EHL Guidebook, Mobil Oil Co., 1979.
152. Zaretsky EV (ed.). STLE Life Adjustment Factors for Ball and Roller Bearings. STLE: Park Ridge, IL, 1992.
153. Olver AV, Spikes HA. Prediction of traction in elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 1998; 212:321-332.
154. Nanbu T, Chiba N, Kano M, Ushijima K. Effect of surface roughness on elastohydro-dynamic traction: Part 1. Lubrication Science 2005; 17:281-293.
155. Ushijima K, Nanbu T, Chiba N, Kano M, Aoyama S. Effect of surface roughness on elastohydrodynamic traction. Part 2. Lubrication Science 2005; 17:403-418.
156. Reynolds O. On the theory of lubrication and its application to Mr Beauchamp Tower's experiments, including an experimental determination of the viscosity of olive oil. Philosophical Transactions of the Royal Society of London 1886; 177:157-234.
157. Dowson D. History of Tribology, 2nd edition. PEP: London, 1998.
158. Almqvist T, Larsson R. A comparison between computational fluid dynamic and Reynolds approaches for simulating transient EHL line contact. Tribology International 2004; 37:61-69.
159. Bair S, McCabe C, Cummings PT. Calculation of viscous EHL traction for squalane using molecular simulation and rheometry. Tribology Letters 2002; 13:251-254.
160. Spikes HA, Anghel V, Glovnea R. Measurement of the rheology of lubricant films within elastohydrodynamic contacts. Tribology Letters 2004; 17:589-600.
161. Israelachvili J. Intermodular and Surface Forces, 2nd edition. Academic Press: London, 1992.
162. Abd-AlSamieh, MF Rahnejat H. Nano-lubricant film formation due to combined elastohydrodynamic and surface force action under isothermal conditions. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 2001; 215:1019-1030.
163. Jianping G, Luedtke WD, Landman U. On the effects of roughness on structures, solvation forces and shear of molecular films in a nano-confinement. Fundamentals of Tribology - Bridging the Gap between Macro- Micro- and Nanoscales (Bhushan B, ed.). Kluwer Academic: Dordrecht, 2001; 583-605.
164. Wolveridge PE, Baglin KP, Archard JE The starved lubrication for cylinders in line contact. Proceedings of the Institution of Mechanical Engineers 1971; 185:1159-1169.
165. Glovnea RP, Spikes HA. Elastohydrodynamic film collapse during rapid deceleration. Part II: Theoretical analysis and comparison of theory and experiment. Transactions of the ASME, Journal of Tribology 2001; 123:262-267.
166. Morales-Espejel GE, Dumont ML, Lugt PM, Olver AV. A limiting solution for the dependence of film thickness on velocity in EHL contacts with very thin films. Tribology Transactions 2005; 48:317-327.