Measurement of pressure distribution in EHL - Development of method and application to dry static contacts

Tribology Transactions

Volumn 48, Issue 4, 2005, Pages 474-483

  Cann, P M ^a   Spikes, H A ^a  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

Author keywords

Contact Mechanics; Elastohydrodynamic Lubrication (EHL); Surface Roughness Effects

Indexed keywords

CALIBRATION; COMPACTION; DATA ACQUISITION; HYDRODYNAMICS; INTERFEROMETRY; SURFACE ROUGHNESS;

CONTACT MECHANICS; ELASTOHYDRODYNAMIC LUBRICATION (EHL); SURFACE ROUGHNESS EFFECTS;

PRESSURE DISTRIBUTION;

EID: 33645991241     PISSN: 10402004     EISSN: None     Source Type: Journal    
DOI: 10.1080/05698190500313460     Document Type: Article

References (27)

1. Hertz, H. (1881), "Über die berührung fester elastischer körper," J. Reine Angew. Math., 92, pp 156-171.
2. Evans, H. P. and Snidle, R. W. (1996). "Analysis of Micro-elastohydrodynamic Lubrication for Engineering Contacts," Tribol. Int., 29, pp 659-667.
3. Liu, G., Wang, Q. and Lin, C. (1999), "A Survey of Current Models for Simulating the Contact between Rough Surfaces," Tribol. Trans., 42, pp 581-591.
4. Mihailidis, A., Bakolas, V. and Drivakos, N. (2001), "Subsurface Stress Field of a Dry Line Contact," Wear, 249, pp 546-556.
5. Hamer, J. C., Sayles, R. S. and Ioannides, E. (1987), "Deformation Mechanisms and Stresses Created by 3rd Body Debris Contacts and Their Effects on Rolling Bearing Fatigue," Proceedings of the 14th Leeds-Lyon Symposium on Tribology, Paper VIII(ii), pp 201-208.
6. Nixon, H. P. and Zantopoulos, H. (1995), "Fatigue Life Performance Comparisons of Tapered Roller Bearings with Debris-Damaged Raceways," Lubr. Eng., 51, pp 732-736.
7. Coulon, S., Ville, F. and Lubrecht, A. A. (2002), "Effect of a Dent on the Pressure Distribution in Dry Point Contacts" ASME J. Tribol., 124, pp 220-226.
8. Kannell, J. W., Bell, J. C. and Allen, C. M. (1965), "Methods for Determining Pressure Distributions in Lubricated Contacts," ASLE Trans., 8, pp 250-270.
9. Safa, M.M., Anderson, J.C. and Leather, J.A. (1982/1983),"Transducers for Pressure, Temperature and Oil Film Thickness Measurement in Bearings," Sensors Actuator, 3, pp 119-128.
10. Mihara, Y., Sekine, K. and Someya, T. (2002), "Study on the Development of a Thin-Film Sensor for Measuring Oil-Film Pressure in Engine Bearing and Piston Pin-Boss," Proceedings 29th Leeds-Lyon Symposium on Tribology, pp 391-401.
11. Marginson, H., Sayles, R. S. and Olver, A. V. (1995), "Limitations of Thin Film Microtransducers in Highly Loaded Contacts," Tribol. Int., 28, pp 517-521,
12. Pau, M., Aymerich, F. and Ginesu, G. F. (2002), "Distribution of Contact Pressure in Wheel-Rail Contact Area," Wear, 253, pp 265-274.
13. Dwyer J. R. S. and Drinkwater, B. W. (1998), "Analysis of Contact Pressure Using Ultrasonic Reflection," Proceedings of the 11th International Conference on Experimental Mechanics. Experimental Mechanics. Adv. Des. Test. Anal., 1, pp 747-60,
14. Gardiner, D. J., Baird, E., Gorvin, A.C., Marshall, W. E. and Dare-Edwards, M. P. (1983), "Raman Spectra of Lubricants in Elastohydrodynamic Entrapments," Wear, 91, pp 111-114.
15. Gardiner, D. J., Baird, E., Craggs, C., Dare-Edwards, M. P. and Bell, J. C. (1989), "Raman Microspectroscopy of a Working Elastohydrodynamic Contact," Lub. Sci., 1, pp 301-313.
16. Mansot, J. L. and Martin, J. M. (1985), "Measurements of Local Pressure in a Static Sphere/Plane Interface Containing Organic Compounds by Means of Raman Spectroscopy." in Proc. 12th Leeds-Lyons Symposium on Tribology, Mechanisms and Surface Distress, pp 234-237.
17. Jublaut, I., Mansot, J. L., Vergne, P. and Mazuyer, D. (2002), "In-situ Pressure Measurements Using Raman Microspectroscopy in a Rolling Elastohydrodynamic Contact," ASME J. Trib., 124, pp 114-120.
18. Astrom, H. and Venner, C. H. (1996), "Soap Thickener Induced Local Pressure Fluctuations in a Grease Lubricated Elastohydrodynamic Point Contact," J. Eng Tribol., 210, pp 259-268.
19. Lee, R.-T., Chu, H.-M. and Chiou, Y.-C. (2002), "Inverse Approach for Calculating Pressure and Viscosity in Elastohydrodynamic Lubrication of Line Contacts," Tribol. Int., 35, pp 809-817.
20. Yamaguchi, K., Uchida, M. and Abraha, P. (1990), "Measurement of Pressure Distribution on Contact Surface By Reflection of Light (Effect of Surface Etching)," in Proceedings of the Japan International Tribology Conference Nagoya, pp 1271-1276.
21. Diaconescu, E. and Glovnea, M. (2003), "A New Experimental Technique to Measure Contact Pressure," ASME Preprint 2003-TRIB-278.
22. Johnston, G. J., Wayte, R. W. and Spikes, H. A. (1991), "Measurement and Study of Very Thin Lubricant Films in Concentrated Contacts," Tribol. Trans., 34, pp 187-194.
23. Cole, S. J. and Sayles, R. S. (1992), "A Numerical Model for the Contact of Layered Elastic Bodies with Real Rough Surfaces," ASM J. Tribol., 114, pp 334-340.
24. Hofrichter, A., Constantinescu, A., Benayoun, S., Bulkin, P. and Drevillon B. (2000), "Study of the Mechanical Behaviour of Plasma-Deposited Silica Films on Polycarbonate and Steel," J. Vac. Sci. Technol. A, 18, pp 2012-2016.
25. 2 Glass at Hydrostatic Pressures up to 5.0 GPa," Glass Phys. Chem., 21, pp 273-278.
26. Johnson, K. L., Kendall, K. and Roberts, A. D. (1971), "Surface Energy and the Contact of Elastic Solids," Proc. Roy. Soc. Lond. A, 324, pp 301-313.
27. Cann, P. M. E., Hamer, J. C., Sayles, R. S., Spikes, H. A. and Ioannides, E. (1996), "Direct Observation of Particle Entry and Deformation in a Rolling EHD Contact," in Proceedings 22nd Leeds-Lyon Symposium on Tribology, pp 127-134.