Monazite coatings on SiC fibers I: Fiber strength and thermal stability

Journal of the American Ceramic Society

Volumn 89, Issue 11, 2006, Pages 3475-3480

  Boakye, E E ^a   Mogilevsky, P ^a   Parthasarathy, T A ^a   Hay, R S ^b   Welter, J ^b   Kerans, R J ^b  

^a UES INC   (United States)

^b AIR FORCE RESEARCH LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COATED FIBERS; MONAZITE FIBER COATINGS; SILICA SCALE THICKNESS; THERMOMECHANICAL STABILITY;

FIBERS; HEAT TREATMENT; OXIDATION; SCANNING ELECTRON MICROSCOPY; SILICON CARBIDE; TENSILE STRENGTH; THERMODYNAMIC STABILITY; TRANSMISSION ELECTRON MICROSCOPY;

MONAZITE;

EID: 33750263402     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2006.01288.x     Document Type: Article

References (53)

1. P. E. D. Morgan and D. B. Marshall, "Ceramic Composites of Monazite and Alumina," J. Am. Ceram. Soc., 78 [6] 1553-63 (1995).
2. P.-Y. Lee, M. Imai, and T. Yano, "Fracture Behavior of Monazite-Coated Alumina Fiber-Reinforced Alumina-Matrix Composites at Elevated Temperature," J. Ceram. Soc. Jpn., 112 [12] 628-33 (2004).
3. K. A. Keller, T. Mah, T. A. Parthasarathy, E. E. Boakye, P. Mogilevsky, and M. K. Cinibulk, "Effectiveness of Monazite Coatings in Oxide/Oxide Composites after Long Term Exposure at High Temperature," J. Am. Ceram. Soc., 86 [2] 325-32 (2003).
4. 4 at High Temperatures," J. Eur. Ceram. Soc., 21, 751-7 (2001).
5. P. E. D. Morgan, D. B. Marshall, and R. M. Housley, "High Temperature Stability of Monazite-Alumina Composites," Mater. Sci. Eng., A195, 215-22 (1995).
6. Z. Li and R. C. Bradt, "Thermal Expansion and Thermal Expansion Anisotropy of SiC Polytypes," J. Am. Ceram. Soc., 70 [7] 445-8 (1987).
7. E. E. Boakye, R. S. Hay, P. Mogilevsky, and L. M. Douglas, "Monazite Coatings on Fibers: II, Coating without Strength Degradation," J. Am. Ceram. Soc., 84 [12] 2793-801 (2001).
8. 4 Coated Nextel™ 720," J. Am. Ceram. Soc. 87 [2] 314-6 (2004).
9. T. A. Parthasarathy, C. A. Folsom, and L. P. Zawada, "Combined Effects of Exposure to Salt (NaCl) Water and Oxidation on the Strength of Uncoated and BN-Coated Nicalon Fibers," J. Am. Ceram. Soc., 81 [7] 1812-8 (1998).
10. 2O," J. Am. Ceram. Soc., 83 [3] 657-9 (2000).
11. I. Spitsberg and J. Steibel, "Thermal and Environmental Barrier Coatings for SiC/SiC CMCs in Aircraft Engine Applications," App. Ceram. Tech., 1 [4] 291-301 (2004).
12. K. N. Lee, D. S. Fox, J. I. Eldridge, D. Zhu, R. C. Robinson, N. P. Bansal, and R. A. Miller, "Upper Temperature Limit of Environmental Barrier Coatings Based on Mullite and BSAS," J. Am. Ceram. Soc., 86 [8] 1299-306 (2003).
13. P. Mogilevsky, E. E. Boakye, R. S. Hay, J. Welter, and R. J. Kerans, "Monazite Coatings on SiC Fiber Tows II: Oxidation Protection"; J. Am. Ceram. Soc., 89, 3481-3490 (2006).
14. K. Kumagawa, H. Yamaoka, M. Shibuya, and T. Yamamura, "Fabrication and Mechanical Properties of New Improved Si-M-C-(O) Tyranno Fiber," Ceram. Eng. Sci. Proc., 19 [3] 65-72 (1998).
15. K. Kumagawa, H. Yamaoka, M. Shibuya, M. Suzuki, and T. Yamamura, "Fabrication and Mechanical Properties of Si-M-C-(O) Tyranno Fibers," Ceram. Eng. Sci. Proc., 21 [4] 291-8 (2000).
16. K. Kumagawa, H. Yamaoka, M. Shibuya, and T. Yamamura, "Development of Si-M-C-(O) Tyranno Fiber Containing a Small Amount of Sol-Gel-Derived Oxide," Ceram. Eng. Sci. Proc., 22 [3] 399-406 (2001).
17. R. E. Jones, D. Petrak, J. Rabe, and A. Szweda, "Sylramic™ SiC Fibers for CMC Reinforcement," J. Nuclear Mater., 283-287, 556-9 (2000).
18. A. R. Bunsell and M. H. Berger, "Fine Diameter Ceramic Fibres," J. Eur. Ceram. Soc., 20, 2249-60 (2000).
19. E. Boakye, R. S. Hay, and M. D. Petry, "Continuous Coating of Oxide Fiber Tows Using Liquid Precursors: Monazite Coatings on Nextel 720," J. Am. Ceram. Soc., 82 [9] 2321-31 (1999).
20. R. S. Hay, "Sol-Gel Coating of Fiber Tows," Ceram. Eng. Sci. Proc., 12 [7-8] 1064-71 (1991).
21. M. K. Cinibulk, J. R. Welch, and R. S. Hay, "Preparation of Thin Sections of Coated Fibers for Characterization by Transmission Electron Microscopy," J. Am. Ceram. Soc., 79 [9] 2481-4 (1996).
22. M. D. Petry and T.-I. Mah, "Effect of Thermal Exposures on the Strength of Nextel 550 and 720 Filaments," J. Am. Ceram. Soc., 82 [10] 2801-7 (1999).
23. T. A. Parthasarathy, "Extraction of Weibull Parameters of Fiber Strength from Means and Standard Deviations of Failure Loads and Fiber Diameters," J. Am. Ceram. Soc., 84 [3] 588-92 (2001).
24. M. D. Petry, T. Mah, and R. J. Kerans, "Validity of Using Average Diameter for Determination of Tensile Strength and Weibull Modulus of Ceramic Filaments," J. Am. Ceram. Soc., 80 [10] 2741-4 (1997).
25. D. M. Wilson and L. R. Visser, "High Performance Oxide Fibers for Metal and Ceramic Composites." Composites A, A32, 1143-53 (2001).
26. R. J. Kerans, R. S. Hay, T. A. Parthasarathy, and M. K. Cinibulk, "Interface Design for Oxidation Resistant Ceramic Composites," J. Am. Ceram. Soc., 85 [11] 2599-632 (2002).
27. A. G. Evans and J. W. Hutchinson, "Overview No. 120, The Thermomechanical Integrity of Thin Films and Multilayers," Acta Metall. Mater., 43 [7] 2507-30 (1995).
28. R. S. Hay and E. Boakye, "Monazite Coatings on Fibers: I, Effect of Temperature and Alumina Doping on Coated Fiber Tensile Strength," J. Am. Ceram. Soc., 84 [12] 2783-92 (2001).
29. A. P. Roborts and E. J. Garboczi, "Elastic Properties of Model Porous Ceramics," J. Am. Ceram. Soc., 83 [12] 3041-8 (2000).
30. T. Ostrowski and J. Rodel, "Evolution of Mechanical Properties of Porous Alumina during Free Sintering and Hot-Pressing," J. Am. Ceram. Soc., 82 [11] 3080-6 (1999).
31. D. C. C. Lam, F. F. Lange, and A. G. Evans, "Mechanical Properties of Partially Dense Alumina Produced from Powder Compacts," J. Am. Ceram. Soc., 77 [8] 2113-7 (1994).
32. K. K. Phani and S. K. Niyogi, "Elastic Modulus-Porosity Relation in Polycrystalline Rare-Earth Oxides," J. Am. Ceram. Soc., 70 [12] C362-6 (1987).
33. E. Vagaggini, J. M. Domergue, and A. G. Evans, "Relationship Between Hysteresis Measurements and the Constituent Properties of Ceramic Matrix Composites: I. Theory," J. Am. Ceram. Soc., 78 [10] 2709-20 (1995).
34. J. M. Domergue, E. Vagaggini, and A. G. Evans, "Relationship between Hysteresis Measurements and the Constituent Properties of Ceramic Matrix Composites: II, Experimental Studies in Unidirectional Materials," J. Am. Ceram. Soc., 78 [10] 2721-31 (1995).
35. D. R. Clarke and W. Pompe, "Critical Radius for Interface Separation of a Compressively Stressed Film from a Rough Surface," Acta Mater., 47 [6] 1749-56 (1999).
36. T. Hinoki, L. L. Snead, E. Lara-Curzio, J. Park, and A. Kohyama, "Effect of Fiber Properties on Mechanical Properties of Crystalline Silicon Carbide Composites," Ceram. Eng. Sci. Proc., 23 [3] 511-8 (2002).
37. L. A. Bonney and R. R. Cooper, "Reaction-Layer Interfaces in SiC-Fiber-Reinforced Glass-Ceramics: A High Resolution Scanning Transmission Electron Microscopy Analysis," J. Am. Ceram. Soc., 73 [10] 2916-21 (1990).
38. G. Qi, K. E. Spear, and C. G. Pantano, "Carbon-Layer Formation at Silicon-Carbide-Glass Interfaces," Mater. Sci. Eng., A162, 45-52 (1993).
39. H.-E. Kim and A. J. Moorhead, "Strength of Nicalon Silicon Carbide Fibers Exposed to High-Temperature Gaseous Environments," J. Am. Ceram. Soc., 74 [3] 666-9 (1991).
40. Y. G. Gogotsi and M. Yoshimura, "Low Temperature Oxidation, Hydrothermal Corrosion, and Their Effects on Properties of SiC (Tyranno) Fibers," J. Am. Ceram. Soc., 78 [6] 1439-50 (1995).
41. M. Takeda, A. Urano, J. Sakamoto, and Y. Imai, "Microstructure and Oxidation Behavior of Silicon Carbide Fibers Derived from Polycarbosilane," J. Am. Ceram. Soc., 83 [5] 1171-6 (2000).
42. D. J. Srolovitz and S. A. Safran, "Capillary Instabilities in Thin Films. I. Energetics," J. Appl. Phys., 60 [1] 247-54 (1986).
43. R. S. Hay, E. E. Boakye, and M. D. Petry, "Effect of Coating Deposition Temperature on Monazite Coated Fiber," J. Eur. Ceram. Soc., 20, 589-97 (2000).
44. E. E. Boakye, R. S. Hay, and P. Mogilevsky, "Spherical Rhabdophane Sols II. Fiber Coating," J. Am. Ceram. Soc., submitted.
45. P. Baldus, M. Jansen, and D. Sporn, "Ceramic Fibers for Matrix Composites in High-Temperature Engine Applications," Science, 285, 699-703 (1999).
46. K. Suzuki, K. Kumagawa, T. Kamiyama, and M. Shibuya, " Characterization of the Medium-Range Structure of Si-Al-C-O, Si-Zr-C-O and Si-Al-C Tyranno Fibers by Small Angle X-Ray Scattering," J. Mater. Sci., 37, 949-53 (2002).
47. K. Kumagawa, Personal Communication, 2000.
48. W. Yang, A. Kohyama, T. Noda, Y. Katoh, T. Hinoki, H. Araki, and J. Yu, "Interfacial Characterization of CVI-SiC/SiC Composites," J. Nucl. Mater., 307-311, 1088-92 (2002).
49. H. M. Yun and J. A. DiCarlo, "Comparison of the Tensile, Creep, and Rupture Strength Properties of Stoichiometric SiC Fibers," Ceram. Eng. Sci. Proc., 20 [3] 259-72 (1999).
50. G. N. Morscher and J. Martinez-Fernandez, "Fiber Effects on Minicomposite Mechanical Properties for Several Silicon Carbide Fiber - Chemically Vapor-Infiltrated Silicon Carbide Matrix Systems," J. Am. Ceram. Soc., 82 1] 145-55 (1999).
51. N. Chawla, J. W. Holmes, and J. F. Mansfield, "Surface Roughness Characterization of Nicalon and Hi-Nicalon Ceramic Fibers by Atomic Force Microscopy," Mater. Charact., 35, 199-206 (1995).
52. E. Vanswijgenhoven, K. Lambrinou, M. Wevers, and O. V. D. Biest, "Comparative Study of the Surface Roughness of Nicalon and Tyranno Silicon Carbide Fibres," Composites A, 29A, 1417-23 (1998).
53. J. J. Sha, T. Nozawa, J. S. Park, Y. Katoh, and A. Kohyaman, "Effect of Heat-Treatment on the Tensile Strength and Creep Resistance of Advanced SiC Fibers," J. Nucl. Mater., 329-333, 5992-602 (2004).