Contamination of electronic assemblies

Contamination of Electronic Assemblies

Volumn , Issue , 2002, Pages 1-217

  Pecht, Michael ^c   Bumiller, Elissa M ^a   Douthit, David A ^b   Pecht, Joan ^a  

^a UNIVERSITY OF MARYLAND   (United States)

^b LoCan LLC   (United States)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

EID: 33750099473     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (150)

1. Grayson, M., Encyclopedia of composite materials and components, John Willey & Sons: New York, 1983. pp. 193.
2. Turlik, I., Advanced packaging technology. Microelectronics Center of North Carolina: North Carolina, 1994.
3. IPC Standard EG-140 Specification for Finished Fabric Woven E-glass for Printed Boards. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, March 1988.
4. Tautscher, C. J. Contamination effects on electronic products. Marcel Dekker, Inc.: New York, 1991.
5. Mayo, R., Nanni, A., Watkins, S., “Strengthening of Bridge G-270 with externally bonded carbon fiber reinforced polymer (CFRP),” Research Investigation RI98-02, Missouri Department of Transportation, December 1999. p. 4.
6. th Edition. Hawley G., revised. Van Nostrand Reinhold Company: New York. 1971.
7. Fullwood, L. “Removing negative acting photoresists,” Electronic Packaging and Production. December 1971.
8. Tautscher, C., The contamination of printed wiring boards and assemblies. Omega Science Services: Washington, 1976.
9. “Adhesives for composite materials used in printed circuitry.” U.S. Department of Commerce, OTS, PB 121960.
10. Zado, F., “Insulation resistance degradation caused by nonionic water soluble flux residues,” Proceedings of the Technical Program Nepcon, 1979. p. 374-376.
11. Ellis, B. N., “New aspects on the solderability of printed circuits,” Proceedings of the Technical Program, Nepcon, 1969.
12. Boudreau, R. J., “Glass fabric finishes: Effects on the kinetics of water, absorption, and laminate physical and electrical properties,” Proceedings of the Printed Circuit World Convention II, 1. 1981.
13. Ellis, B. N., “Contamination on components and small assemblies,” Proceedings of the Technical Program, Internepcon. 1984.
14. Lea, C., Howie, F., H., “Controlling the quality of soldering of PTH solder joints.” Circuit World, Vol.11, No.3, 1985. pp. 5-7.
15. Matthaes, G., “The technique of surface cleaning of professional printed circuit boards and multilayers,” Technical Data Sheet. 1981.
16. Toms, K. R., “…but what are we doing to the copper?” Circuit World, Vol. 8, No. 1. 1981. p. 24.
17. ASM Handbook, Volume 5, Surface Engineering. Choosing a Cleaning Process. ASM International. Materials Park. 1996.
18. ASM Handbook, Volume 5, Surface Engineering. Guide to Mechanical Cleaning Systems. ASM International. Materials Park. 1996.
19. ASM Handbook, Volume 5, Surface Engineering. Guide to Alkaline, Emulsion, and Ultrasonic Cleaning. ASM International. Materials Park. 1996.
20. Crawford, T., “Conformal coating adhesion over no-clean fluxes,” Annual Electronics Manufacturing Seminar, 1995. pp. 21-30.
21. Ritchie, B., Conformal coating over soldermask, no-clean soldering and alternate cleaning technologies. Proceedings of the Technical Program, NEPCON West '94. Vol. 2, 1994. pp. 1312-1331.
22. Christou, A. Electromigration and electronic device degradation. John Wiley & Sons: New York, 1994.
23. Scully, J. C. The fundamentals of corrosion. Pergamon Press: Oxford, 1990.
24. Bennington, L. D., Crossan, D., “Conformal coating overview,” Proceedings of the Technical Program, NEPCON West '95, Vol. 3, 1995. pp. 1757-1761.
25. Cantor, S. “Solvent-free aerobic adhesives and coating III novel multi-cure conformal coating provides complete shadow cure at room temperature,” Proceedings of the Technical Program Nepcon West ‘96, 1996. pp. 443-457.
26. Crain, K. “Conformal coatings in microns,” Surface Mount Technology, Vol. 9, 1995. pp. 50-52.
27. Crum, S. “Solvent-free conformal coatings impact application techniques,” Electronic Packaging and Production, Vol. 37, June 1997. pp. 61-70.
28. Cummings, R. J., “Conformal coatings: An overview of processes and removal methods,” http://arioch.gsfc.gov/eee_links/vol_02/no_03/eee2-3r.htm, as viewed on July 8 1998.
29. Frost, G. T., “Making a choice: no VOC/low VOC [PCB conformal coatings],” Proceedings of the Technical Program, Nepcon West '95, Vol. 3, 1995. pp. 1745-1748.
30. Horrocks, H., “Conformal coating removal-what is the best method,” Proceedings of the Technical Program, Nepcon West '96, 1996. pp. 1064-1075.
31. Martin, V. D., “Stripping conformal coatings [PCB repair],” Electronic Packaging and Production, Vol. 35, 1996. pp. 51-52.
32. Naisbitt, G., “Conformal coating coverage.” TECHNET news group posting. September 25 1997.
33. Olson, R. “High performance, non-ODC/VOC conformal coating,” Proceedings of the Technical Program, NEPCON West ’95, Vol. 3, 1995. pp. 1762-1767.
34. Olson, R., “Vacuum-deposited conformal coatings…PCB protection option,” Surface Mount Technology, Vol. 5, 1991. pp. 37-43.
35. Quade, R., “Conformal coatings and process options,” NEPCON West ’95, Vol. 3, 1995. pp. 1749-1756.
36. Rybczyk, J., “Conformal coating process improvement,” Circuits Assembly, Vol. 7, No. 8, 1996. pp. 44, 46, 48, 50, 52.
37. Studd, R., “A conformal coating evol.ution,” Surface Mount Technology, Vol. 11, No. 4, April 1997. pp. 48-50.
38. Tautscher, C. J., “Conformal coatings selection criteria,” Surface Mount Technology, Vol. 12, No. 7, July 1998. p. 64.
39. Tautscher, C. J., “A focus on conformal coating,” Circuits Assembly, Vol. 8, No. 5, 1996. pp. 30-2, 34, 37.
40. Brous, J., “Cleaning materials,” Soldering and Mounting Technology. Alpha Metals, Inc. 1996.
41. Hymes, L., Cleaning printed wiring assemblies in today’s environment. Van Nostrand Reinhold: New York, 1991.
42. Constance, J. D., Controlling in-plant airborne contaminants. Marcel Dekker, Inc.: New York, 1983.
43. Clark, R. H. Printed circuit engineering. Van Nostrand Reinhold: New York, 1989.
44. Bogenschütz, A. F., Analysis and testing in production of circuit boards and plated plastics. Finishing Publications, Ltd.: Teddington, 1985.
45. Shineldecker, C. L., Handbook of environmental contaminants: a guide for site assessment. Lewis Publishers: Boca Raton, 1992.
46. Prasad, R. P., Surface mount technology: principles and practice. Van Nostrand Reinhold: New York, 1989.
47. Manko, H. H., Soldering handbook for printed circuits and surface mounting. Van Nostrand Reinhold: New York, 1995.
48. Geragosian, G., Printed circuit fundamentals. Reston Publishing Company: Reston, 1985.
49. Boswell, D., Wickham, M., Surface Mount Guidelines for Process Control, Quality, and Reliability. McGraw-Hill: London, 1992.
50. Matthew, L. C., Rath, D. L., The waterdrop test highly accelerated migration testing. IBM T.J. Watson Research Center: New York, 1991.
51. Tegehall, P. E., “Reliability verification of printed board assemblies: a critical review of test methods and future test strategy,” Surface Mount International Exposition. August, 1998. pp.359-382.
52. Kenyon, W. G., “Ionic testing: questions and concerns,” Surface Mount Technology, Vol. 12, No. 5, May 1998.
53. Kenyon, W. G., “Borrowing from the semiconductor industry,” Surface Mount Technology, Vol. 11, No. 10, October 1997.
54. Munson, T., “Understanding residues,” Surface Mount Technology, Vol. 11, No. 10, October 1997. pp. 66.
55. Tautscher, C. J., “The evolution of electronic cleaning,” Circuits Assembly. Vol. 9, No. 3, March 1998. pp. 74, 76, 78.
56. Benedict, H., Yuen, M., “A batch cleaner optimization study,” Circuits Assembly. Vol. 9, No. 10, October 1998. pp. 52, 54-7, 59.
57. Finch, K., “Comparison of synthetic semi-aqueous alcohol cleaning technology,” Surface Mount Technology, Vol. 13, No. 2, February 1999. p. 82.
58. Kelly, L., “Removing contamination, improving yield the just-in-time solution,” Electronic Packaging and Production, Vol. 38, No. 15, December 1998. pp. 38-42.
59. Markstein, H. W., “Cleaning assembled circuit boards,” Electronic Packaging and Production, Vol. 38, No. 12, October 1998. pp. 26-34.
60. McCall, P. “No-clean no hazard?” Surface Mount Technology. Vol. 12, No. 8, October 1998. pp. 68-71.
61. Crawford, T. “Cleaning,” Special Supplement to SMT: Back to Basics. July 1998.
62. Kohman, G., Hermance, H., Downes, G., “Silver migration in electrical insulation,” The Bell System Technical Journal, 1955. pp. 1115-1147.
63. Lando, D., Mitchell, J., Welsher, T., “Conductive anodic filament in reinforced polymeric dielectrics: formation and prevention,” Proceedings of the Seventeenth International Reliability Physics Symposium, 1979. pp. 51-63.
64. Pecht, M., Wu B., Jennings, D., “Conductive filament formation in printed wiring boards,” Thirteenth IEEE/CHMT International Electronics Manufacturing Technology Symposium, 1992. pp. 74-79.
65. Lahti, J., Delaney, R., Hines, J., “The characteristic wearout process in epoxy-glass printed circuits for high density electronic packaging,” Proceedings of the Seventeenth International Reliability Physics Symposium, 1979. pp. 39-43.
66. Krumbein, S., “Metallic electromigration phenomena.” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 11, No. 1, 1988. pp. 5-15.
67. Rudra, B., Pecht, M., Jennings, D., “Assessing time-to-failure due to conductive filament formation in multi-layer organic laminates,” IEEE Transactions on Components, Packaging, and Manufacturing Technology, Part B, Vol. 17, No. 3, 1994. pp. 269-276.
68. Rudra B., Jennings, D., “Failure-mechanism models for conductive-filament formation,” IEEE Transactions on Reliability, Vol. 43, No. 3, 1994. pp. 354-360.
69. Shukla, A., Pecht, M., Jordan, J., Rogers, K., Jennings, D., “Hollow fibers in PCB, MCM-L and PBGA laminates may induce reliability degradation,” Circuit World, Vol. 23, No. 2, 1997. pp. 5-6.
70. Shukla, A., Dishongh, T., Pecht, M., Jennings, D., “Hollow fibers in woven laminates,” Printed Circuit Fabrication, Vol. 20, No. 1, 1997. pp. 30-32.
71. Pecht, M., Hillman, C., Rogers, K., Jennings, D., “Conductive filament formation: A potential reliability issue in laminated printed circuit cards with hollow fibers,” IEEE Transactions on Electronics Packaging Manufacturing, Vol. 22, No. 1, 1999. pp. 80-84.
72. ANSI/IPC-A-600 Acceptability of printed boards. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, August 1995.
73. Acceptability of electronic assemblies: Revision B. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, December 1994.
74. Post solder solvent cleaning handbook. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, 1987.
75. Post solder aqueous cleaning handbook. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, 1996.
76. Ferlauto, E., “A study of the effect of acid rain on alkyd, polyester and silicone-modified high-solids coatings,” Federation of Societies for Coatings Technology. October 1994.
77. Tegehall, P.E., “Evaluation of the capability of conformal coatings to percent degradation of printed circuit assemblies in harsh environments part one,” IVF Research Publication 93803, 1993.
78. Tegehall, P. E., “Influence of application method on the reliability of conformal coated circuit assemblies,” IVF Research Publication 96809, 1996.
79. Tegehall, P. E., “Evaluation of the effect of various combinations of solder masks and flux residues on the reliability of conformal coated circuit assemblies,” IVF Research Publication 96808, 1996.
80. Tegehall, P. E., “Evaluation of the capability of conformal coatings to prevent degradation of printed circuit assemblies in harsh environments part two,” IVF Research Publication 96807, 1996.
81. Tegehall, P. E., “Evaluation of the influence of flux residues on the reliability of conformally coated PCB assemblies,” IVF Research Publication 93811, 1993.
82. Tegehall, P. E., “Evaluation of test methods and the impact of contamination from production processes on the reliability of printed circuit board assemblies,” IVF Research Publication 96846, 1996.
83. Fukuda, Y., Fukushima, T., Sulaiman, A., Musalam, I., Yap, L. C., Chotimongkol, L., Judabong, S., Potianart, A. Keowkangwal, O., Yoshihara, K., Tosa, M., “Indoor corrosion of copper and silver exposed in Japan and ASEAN countries,” The Journal of the Electrochemical Society, Vol. 138, No. 5, May 1991. pp. 1238-1242.
84. IPC (1989). PWB Design Workshop, Lincolnwood, IL.
85. White, D. F., Fornes, R. E., Gilbert, R. D., Speer, J. A., “Investigation of the formation of Physical Damage on Automotive Finishes Due to Acidic Reagent Exposure,” Journal of Applied Polymer Science, Vol. 50, 1993. pp. 541-549.
86. Miller, V. M., “Characterization of component failure modes and associated causes,” Advances in Electronic Packaging-ASME, November 1999. pp. 1341-1347.
87. Agnew, J., “Choose cleaning solvents carefully,” Electronic Design 5, March 1974. pp. 54-57.
88. Capillo, Carmen. Surface Mount Technology. McGraw-Hill: New York, 1990.
89. Cordes, F., Huemoeller, R., “Electroless Ni/Au plating capability study of BGA packages,” Future Circuits International. Issue 4. pp. 131–134.
90. Biunno, N., “A root cause failure mechanism for solder joint integrity of electronic Ni/Au surface finishes,” Future Circuits International. Issue 5. pp. 133–139.
91. Gudeczauskas, D., Hashimoto, S., Kiso, M., “Gold Plating,” PC Fabrication. Vol 22, No. 7, July 1999. pp. 30-3.
92. Mei, A., Johnson, P., Eslambolchi, A., Kaufmann M., “The effect of electroless Ni/Au plating parameters on PBGA solder joint attachment reliability,” Proceedings of the ECTC, 1998. pp. 952-961.
93. Zribi, A., Chromik, R.R., Presthus, R., Clum, J., Zavalig, L., Cotts, E.J. “Effect of Au-intermetallic compounds on mechanical reliability of Sn-Pb/Au-Ni-Cu joints,” Advances in Electronic Packaging. Vol. 26-2, no.2, 1999. pp. 1573-1577.
94. Hayes, Michael E., “Semi-Aqueous defluxing using closed-loop processes,” Paper IPC-TP-898: Second International Conference on Flux Technology, 1990.
95. Lowell, Charles R., Sterritt, Janet R., “An aqueous cleaning alternative to CFCs for rosin flux removal,” Paper IPC-TP-893: Second International Conference on Flux Technology, 1990.
96. Marczi, M., Bandyopadhay, N., Adams, S., “No-clean, no-residue soldering process,” Circuits Manufacturing, Vol. 30, February 1990. pp. 42-46.
97. Murray, J., “Ultrasonic cleaning: what's the buzz?” Circuits Manufacturing, Vol. 30, January 1990. pp. 72-74.
98. Parikh, G., “AT&T achieving environmental and quality goals,” Circuits Assembly, Vol. 2, December 1991. pp. 60-62.
99. Pickering, R., “Digital's microdroplet aqueous cleaning project,” Paper IPC-TP-82: Second International Conference on Flux Technology, 1990.
100. Digital Equipment Corporation. “Aqueous microdroplet module cleaning process.” ICOLP, 1990.
101. Russo, John F., and Fischer, Martin S., “Recycling boosts aqueous cleaners,” Circuits Manufacturing, Vol. 29, July 1989. pp. 34-39.
102. Sinclair, J. D., “The relevance of particle contamination to corrosion of electronics in processing and field environments”, Bell Laboratories, Electrochemical Society Semiannual International Meeting, Honolulu, HI, Oct. 1999.
103. Specialty Coating Systems. “Parylene conformal coatings specifications and properties.” http://www.scscookson.com/parylene/properties.htm, as viewed on February 8 2002.
104. Virmani, N., “Understanding the effectiveness of parylene coatings in the protection of plastic encapsulated microcircuits and assemblies from moisture initiated failure mechanisms,” http://epims.gsfc.nasa.gov/ctre/ct/techdocs/parylene/parylene.html, as viewed on 26 August 2001
105. Neale, R., “COTS and performance based specifications – the blind leading the blind?” Electronic Engineering, October 2001. pp. 17-20.
106. Ritchie, B. “New conformal coatings combine protection with environmental safety,” Surface Mount Technology, April 2000. pp. 16-19.
107. IPC-HDBK-830. Guidelines for Design, Selection, and Application of Conformal Coatings. The Institute for Interconnecting and Packaging Electronic Circuits: Northbrook, IL, October 1999.
108. Licari, James J., Hughes, Laura A., Handbook of Polymer Coatings for Electronics. Second Edition, Noyes Publications: Park Ridge, New York, 1990.
109. Wong, C. P., Pike, Randy T., and Wu, J., “Interface-adhesion-enhanced bilayer conformal coating for avionics application,” Proceedings of the International Symposium on Advanced Packaging Materials, 1999. pp. 302-10.
110. Dietrich, Tim. “Deep recess penetration,” Surface Mount Technology, February 2002, pp. 15-18.
111. Para Tech Coating, “Typical engineering properties of commercial parylenes,” http://www.hpetch.se/paratech/parylene_properties.html, as viewed on February 13 2002.
112. Parylene Coating Services Inc, “Properties of parylene,” http://www.paryleneinc.com/images_s/%20PDS%20Dimer%20Internation al.pdf, as viewed on February 13 2002.
113. Donges, Bill, “Conformal Coating Optimization,” Surface Mount Technology, August 2001.
114. Graedel, T.E., Leygraf, C., Atmospheric Corrosion, John Wiley & Sons, Inc.: New York, 2000.
115. Technical Follow-up Bulletin Number 212600011, Airbus Industries, June 1993.
116. Service Bulletin Number M21-3341-037-00, Honeywell, Inc., February 1997.
117. Taylor, S.R., “Assessing the moisture barrier properties of polymeric coatings using electrical and electrochemical methods”, Proceeding IEEE Transactions on Electrical Insulation, vol. 24(5), 1989. pp. 787-806.
118. Comizzoli, R.B., Frankenthal, R.P., Milner, P.C., Sinclair, J.D., “Corrosion of electronic materials and devices”, Science, vol. 234, 1986, pp. 340-345.
119. Hnatek, E.R., Integrated Circuit Quality and Reliability, Marcel Dekker, New York, 1995.
120. Belton, D.J., Sullivan, E.A., Molter, M.J., “Moisture sorption and its effect upon the microstructure of epoxy molding compounds,” Proceedings IEEE/CHMT International Electronic Manufacturers Technology Symposium, 1987, pp. 158-169.
121. Belton, D.J., Sullivan, E.A., Molter, M.J., “Moisture transport in epoxies for microelectronics applications,” Polymers for Electronics Packaging and Interconnection, American Chemical Society, 1989. pp. 286-320.
122. Aronhime, M.T., Peng, X., Gillham, J.K., “Effect of time-temperature path of cure on the water absorption of high Tg epoxy resins,” Journal of Applied Polymer Science, vol. 32, 1986. pp. 3589-3626.
123. Best, M., Halley, J.W., Johnson, B., Valles, J.L., “Water penetration in glassy polymers: experiment and theory,” Journal of Applied Polymer Science, vol. 48, 1993. pp. 319-334.
124. Zheng, Q., Morgan, R.J., “Synergistic thermal-moisture damage mechanisms of epoxies and their carbon fiber composites,” Journal of Composite Materials, vol. 27(15), 1993. pp. 1465-1478.
125. Day, D.R., Shepard, D.D., Craven, K.J., “A microdielectric analysis of moisture diffusion in thin epoxy/amine films of varying cure state and mix ratio,” Polymer Engineering and Science, vol. 32(8), 1992. pp. 524-528.
126. Maffezzoli, A.M., Peterson, L., Seferis, J.C., “Dielectric characterization of water sorption in epoxy resin matrices”, Polymer Engineering and Science, vol. 33(2), 1993. pp. 75-82.
127. Gupta, V.B., Drzal, L.T., Rich, M.J., “The physical basis of moisture transport in a cured epoxy resin system,” Journal of Applied Polymer Science, vol. 30, 1985. pp. 4467-4493.
128. Dycus, D.W., “Moisture uptake and release by plastic molding compounds its relationship to system life and failure mode,” Proceeding IEEE, 1980. pp. 293-300.
129. Gale, R.J., “Epoxy degradation induced Au-Al intermetallic void formation in plastic encapsulated MOS memories,” Proceeding IEEE International Reliability Physics Symposium, 1984. pp. 37-47.
130. Gallo, A.A., “Effect of mold compound components on moisture-induced degradation of gold-aluminum bonds in epoxy encapsulated devices,” Proceeding IEEE International Reliability Physics Symposium, 1990. pp. 244-251.
131. Khan, M.M., Fatemi, H., “Gold-aluminum bond failure induced by halogenated additives in epoxy molding compounds,” Proceeding IEEE International Symposium on Microelectronics, 1986. pp. 420-428.
132. Lum, R.M., Feinstein, L.G., “Investigation of the molecular processes controlling corrosion failure mechanisms in plastic encapsulated semiconductor devices,” Proceedings of the 30th IEEE Electronics Components Conference, 1980. pp. 113-120.
133. Gallo, A.A., “Effectors of high temperature reliability in epoxy encapsulated devices,” Technical Paper-Delco Electronic Materials Division, 1993. pp. 1-27.
134. Berg, H.M., Paulson, W.M., “Chip corrosion in plastic packages”, Microelectronic Reliability, vol. 20, 1980. pp. 247-263.
135. Dunn, C.F., McPherson, J.W. “Recent observations on VLSI bond pad corrosion kinetics,” Journal of the Electrochemical Society: Solid State Science and Technology, vol. 135(3), 1988. pp. 661-665.
136. Hopfenbergh, H.B., Permeability of Plastic Films and Coatings to Gases, Vapors and Liquids, Plenum Press: New York, 1974.
137. Crank, J., Park, G.S., Diffusion in Polymers, Academic Press: London, 1968.
138. Comyn, J., Polymer Permeability, Elsevier: London, 1985.
139. Boa, T., Tanaka, J., “The diffusion of ions in polyethylene,” Proceedings of the Third International Conference on Properties and Applications of Dielectric Materials, 1991. pp. 236-239.
140. Manzione, L.T., Plastic Packaging Of Microelectronic Devices, Van Nostrand Reinhold: New York, 1990.
141. Pecht, M.G., Nguyen, L.T., Hakim, E.B., Plastic-Encapsulated Microelectronics, John Wiley & Sons: New York, 1995.
142. Zhang, H., Davidson, W., “Performance characteristics of diffusion gradients in thin films for the in situ measurement of trace metals in aqueous solution,” Analytical Chemistry, vol. 67(19), 1995. pp. 3391-3400.
143. Zamanzadeh, M., Liu, Y.S., Wynblatt, P., Warren, G.W., “Electrochemical migration of copper in adsorbed moisture layers,” Journal of Science and Engineering Corrosion, vol. 45, no. 8, August 1989.
144. IPC Publication IPC-TR-476A, “Electrochemical Migration: Electrically Induced Failures in Printed Wiring Assemblies,” Northbrook, IL, May 1997.
145. IPC Publication IPC-SM-840C “Qualification and Performance of Permanent Solder Mask,” Northbrook, IL, January 1996.
146. Hernefjord, Ingemar, Cut-out from Report about SBGA Soldering Problems Support from US Companies/Simple Mechanical Tests, January 29, 2001.
147. Ward, Pamela, “Plasma cleaning techniques and future applications in environmentally conscious applications,” Sandia National Laboratories supported by the U.S. Department of Energy under contract #DE-AC04-94AL85000.
148. “How clean is clean? Definition and measurement of cleanliness project final report,” NCMS Report 0173RE96, National Center for Manufacturing Sciences: Ann Arbor, MI, June 1998.
149. Henry, Mark, “A Methodology for Determining Root Causes of Failures Due to Contamination of Electronic Assemblies,” Master of Science Thesis, University of Maryland, 1999.
150. Straus, Isidor, (2000), “Understanding the NEBS airborne contaminant requirements,” http://www.conformity.com/0008reflections.html, accessed on 1 July 2002.