Surface characteristics of machined aluminium metal matrix composites

International Journal of Machine Tools and Manufacture

Volumn 46, Issue 15, 2006, Pages 2017-2025

  Kannan, S ^a   Kishawy, H A ^a  

^a UNIVERSITY OF NEW BRUNSWICK   (Canada)

Author keywords

Composite; Cutting; Microhardness

Indexed keywords

ALUMINUM; DEFORMATION; EQUIPMENT TESTING; MACHINING; METAL CUTTING; MICROHARDNESS; PARTICLE SIZE ANALYSIS; SCANNING ELECTRON MICROSCOPY; SURFACE PROPERTIES; TRANSMISSION ELECTRON MICROSCOPY; VOLUME FRACTION;

ALUMINIUM METAL MATRIX COMPOSITES; GEOMETRICAL DEFECTS; MICROHARDNESS VARIATIONS; ORTHOGONAL CUTTING;

METALLIC MATRIX COMPOSITES;

EID: 33748953138     PISSN: 08906955     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijmachtools.2006.01.003     Document Type: Article

References (42)

1. Ejiofor J.U., and Reddy R.G. Developments in the processing and properties of particulate Al-Si composites. Journal of Material Science 49 11 (1997) 31-37
2. Zhang Zhu, A literature survey on fabrication methods of cast reinforced metal composites", Proceedings of the International Conference on Advances in Cast Reinforced Metal Composites, ASM, Chicago, 1988, pp. 93-99.
3. J. Dinwoodie, Automotive applications for MMCs based on short staple alumina fibres, SAE Technical Paper Series, International Con. Exp., Detroit, Michigan, 1987, pp. 23-27.
4. Jaspers S.P.F.C. Metal Cutting Mechanics and Material Behavior (1999), Eindhoven, Netherlands
5. Liu C.R., and Barash M.M. Variables governing patterns of mechanical residual stress in a machined surface. Journal of Engineering for Industry 104 (1982) 257-264
6. Surappa M.K., and Rohatgi P.K. Preparation and properties of aluminium alloy ceramic particle composites. Journal of Material Science 16 (1981) 983-993
7. Maruyama B. Progress and promise in aluminium metal matrix composites. The AMPTIAC, NewsLetters 2 (1998) 3
8. Chambers A.R., and Stephens S.E. Machining of Al-5 Mg reinforced with 5 vol% Saffil and 15 vol% SiC fibres. Journal of Material Science and Engineering A 135 (1990) 287-290
9. Clyne T.W. Comprehensive composite materials. In: Kelly A., and Zweben C. (Eds). Metal Matrix Composites vol. 3 (2000), Pergamon, Oxford
10. R. Asthana, Solidification processing of reinforced metals (Trans. Tech. Publ.), 1998.
11. Lloyd D.J. Particle reinforced aluminium and magnesium matrix composites. International Metallurgical Reviews 39 (1999) 1-23
12. Gomez de Salazar J.M., and Barrena M.I. The influence of Si and Mg rich phases on the mechanical properties of 6061 Al matrix composites reinforced with aluminium oxide. Journal of Materials Science 37 (2002) 1497-1502
13. Arsenault R.J., and Taya M. Thermal residual stress in metal matrix composite. Acta Metallurgica 35 3 (1987) 651-659
14. Christman T., Needleman A., and Suresh S. An experimental and numerical study of deformation in metal matrix composites. Acta Metallurgica 37 11 (1989) 3029-3050
15. Davis L.C., and Allison J.E. Residual stresses and other effects on deformation in particle reinforced metal matrix composites. Metallurgical Transactions A 24A (1993) 2487-2496
16. Bao G., Hutchinson J.W., and McMeeking. Particle reinforcement of ductile matrices against plastic flow and creep. Acta Metallurgica et Materialia 39 (1991) 1871-1882
17. Miller W.S., and Humphreys F.J. Strengthening mechanisms in particulate metal matrix composites. Scripta Metallurgica et Materialia 25 1 (1991) 33-38
18. Pandey A.B., Mishra R.S., and Mahajan Y.R. Creep behaviour of an Al-SiC particulate composites. Scripta Metallurgica et Materialia 24 (1990) 1565-1570
19. Leskovar P., and Peklenik J. Influences affecting surface integrity in the cutting process. Annals of the CIRP 31 1 (1982) 447
20. Jeelani S., and Bailey J.A. Residual stress distribution in machining annealed 18 percent nickel maraging steel. Journal of Engineering Materials and Technology 108 (1986) 93
21. Coelho R.T., Yamada S., and Aspinwall D.K. The application of polycrystalline diamond (PCD) tool materials when drilling and reaming aluminum based alloys including MMC. International Journal of Machining Tools Manufacture 15 5 (1995) 761-774
22. Quigley Q., Monaghan J., and O'Reilly P. Factors affecting the machinability of an Al/SiC metal matrix composites. Journal of Materials Processing Technology 43 (1994) 21-36
23. Sahin M., Kok M., and Celik H. Tool wear and surface roughness of alumina particle reinforced aluminium alloy composites. Journal of Materials Processing Technology 128 (2002) 280-291
24. Ibrahim C., Turker M., and Seker U. Evaluation of tool wear when machining SiC reinforced Al-2014 alloy matrix composites. Materials and Design 25 (2004) 251-255
25. N.P. Hung, S. Jana, L.J. Yang, C.H. Heng, Laser drilling of cast metal matrix composites, Proceedings on Machining of Advanced Materials, ASME, AMD 208, Los Angeles, 1995, pp. 87-92.
26. Hung N.P., Boey F.Y.C., Khor K.A., Oh C.A., and Lee H.F. Machinability of cast and powder formed aluminium alloys reinforced with SiC particles. Journal of Materials Processing Technology 48 (1995) 291-297
27. Brinksmeier E., Cammett J.T., Konig W., Leskovar P., and Tonshoff H.K. Residual stresses-measurements and causes in machining processes. Annals of the CIRP 131 2 (1982) 491-510
28. Quan Y., and Bangyan Ye. The effect of machining on the surface properties of SiC/Al composites. Journal of Materials Processing Technology 138 (2003) 464-467
29. Quan Y.M., and Zhou Z.H. Deformation of cutting zone of the hard particle-reinforced metal matrix composites. Journal of South China University Technology 26 4 (1998) 27-31
30. Lee R.S., Hwang G.A., and Bing H. Thermal and grinding induced residual stresses in a silicon carbide particle-reinforced aluminum metal matrix composite. Composites 26 6 (1995) 425-429
31. El-Gallab M., and Sklad M. Machining of Al/SiCp metal matrix composites. Part 2. Workpiece integrity. Journal of Material Processing Technology 83 (1998) 277-283
32. Songmene V., and Balazinski M. Machinability of graphitic metal matrix composites as a function of reinforcing particles. Annals of the CIRP 48 1 (1999) 77-80
33. Hung N.P., Yeo S.H., and Lee K.K. Chip formation in machining particle reinforced metal matrix composites. Materials and Manufacturing Processes 13 1 (1998) 85-100
34. Kishawy H.A., Kannan S., and Balazinski M. An energy based force model for orthogonal cutting of metal matrix composites. Annals of the CIRP 53 1 (2004) 91-94
35. S. Kannan, H.A. Kishawy, Microstructure based force analysis during machining metal matrix composites: TEM analysis, Journal of Machining Science and Technology, submitted for publication.
36. Matsumoto Y., Barash M.M., and Liu C.R. Effect of hardness on the surface integrity of the AISI 4340 steel. Journal of Engineering for Industry 108 (1986) 169-175
37. El-Wardany T.I., Kishawy H.A., and Elbestawi M.A. Surface integrity of die material in high speed hard machining, Part 1 & Part 2. Transaction of ASME 122 (2000) 620 632
38. Thiele J.D., Melkote S.N., Peascoe R.A., and Watkins T.R. Effect of cutting edge geometry and workpiece hardness on the surface residual stress in finish hard turning of AISI 52100 steel. Transactions of the ASME 122 (2000) 642
39. Wu D.W., and Matsumoto Y. The effects of hardness on residual stresses in orthogonal machining of AISI 4340 steel. Journal of Engineering for Industry 112 (1990) 245-252
40. Henrikson E.K. Residual stresses in machined surfaces. Transactions of the ASME 73 (1951) 69-76
41. Colwell L.V., Sinnitt M.J., and Tobin J.C. Transactions of the ASME 77 (1955) 1099
42. El-Khabeery M.M., and Fattouh M. Residual stress distribution caused by milling. International Journal of Machine Tools and Manufacture 29 3 (1988) 391-401