Particle reinforced aluminium and magnesium matrix composites

International Materials Reviews

Volumn 39, Issue 1, 1994, Pages 1-23

  Lloyd, D J ^a  

^a ALCAN INTERNATIONAL LIMITED   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

ALUMINUM; MAGNESIUM PRINTING PLATES; REINFORCEMENT;

PARTICLE REINFORCEMENT;

METALLIC MATRIX COMPOSITES;

EID: 0028201653     PISSN: 09506608     EISSN: 17432804     Source Type: Journal    
DOI: 10.1179/imr.1994.39.1.1     Document Type: Review

References (157)

1. A. Kelly: Compos. Sci. Technol., 1985, 23, 171-199.
2. T. W. Chou, A. Kelly, and A. Okura: Composites, 1985, 16, 187-206.
3. J. DINWOODIE, E. MOORE, C. A. J. LANGMAN, and W. R. SYMES: In Proc. 5th Int. Conf. On ‘Composite Materials - ICCM-V’, (Ed. W. C. Harrigan, Jr Et Al), 671-685; 1985, Warrendale, PA, The Metallurgical Society Of AIME.
4. S. V. Nair, J. K. Tien, and R. C. Bates: Int. Met. Rev., 1985, 30, 275-290.
5. T. DONOMOTO, K. FUNATANI, N. MIURA, and N. MIYAKE: SAE Technical Paper 830252, Detroit, MI, 1983.
6. M. H. Stacey: Mater. Sci. Technol., 1988, 4, 227-230.
7. DEONATH Aand P. K. Rohatgi: J. Mater. Sci., 1980, 15, 2777-2784.
8. M. K. Surappa and P. K. Rohatgi: J. Mater. Sci., 1981, 16, 983-993.
9. A. Banerji, M. K. Surappa, and P. K. Rohatgi: Metall. Trans., 1983, 14B, 273-283.
10. B. P. Krishnan and P. K. Rohatgi: Met. Technol, 1984, 11, 41-44.
11. W. Kai, J. M. Yang, and W. C. Harrigan, Jr; Scr. Metall., 1989, 23, 1277-1281.
12. B. Roebuck and A. E. J. Forno: In ‘Modern Developments In Powder Metallurgy’, Vol. 20, 451-465; 1988, Princeton, NJ, Metal Powder Industries Federation, American Powder Metallurgy Institute.
13. J. J. Lewandowski, C. Liu, and W. H. Hunt, Jr: In ‘Processing and Properties For Powder Metallurgy Composites’, (Ed. P. Kumar Et Al.), 117-137; 1987, Warrendale, PA, The Metallurgical Society Of AIME.
14. D. J. Lloyd, H. P. Lagace, and A. D. Mcleod: In ‘Controlled Interphases In Composite Materials - ICCM-III’, (Ed. H. Ishida), 359-376; 1990, London, Elsevier Applied Science.
15. D. J. Lloyd and B. Chamberlain: In ‘Cast Reinforced Metal Composites’, (Ed. S. G. Fishman and A. K. Dhingra), 263-269; 1988, Metals Park, OH, ASM International.
16. C. M. Adams and R. E. Lewis: In ‘Rapidly Solidified Crystalline Alloys’, (Ed. S. K. Das Et Al), 157-183; 1985, Warrendale, PA, The Metallurgical Society Of AIME.
17. M. S. Zedalis, J. M. Peltier, and P. S. Gilman: In ‘Light-Weight Alloys For Aerospace Applications’, (Ed. E. W. Lee Et Al), 323-334; 1989, Warrendale, PA, The Metallurgical Society Of AIME.
18. F. A. Badia and P. K. Rohatgi: Trans. AFS, 1969, 76, 402-406.
19. A. M. Patton: J. Inst. Met., 1972, 100, 197-201.
20. A. W. Neumann, C. J. Van Oss, and J. Szekely: Kolloid-Z.U.Z. Polym., 1973, 251, 415-423.
21. P. K. Rohatgi: In ‘Interfaces In Metal-Matrix Composites’, (Ed. A. K. Dhingra and S. G. Fishman), 185-202; 1986, Warrendale, PA, The Metallurgical Society Of AIME.
22. K. C. Russell, J. A. Cornie, and S.-Y. Oh: In ‘Interfaces In Metal-Matrix Composites’, (Ed. A. K. Dhingra and S. G. Fishman), 61-91; 1986, Warrendale, PA, The Metallurgical Society Of AIME.
23. P. K. Rohatgi and R. Asthana: In ‘Cast Reinforced Metal Composites’, (Ed. S. G. Fishman and A. K. Dhingra), 61-66; 1988, Metals Park, OH, ASM International.
24. F. Delannay, L. Froyen, and A. Deruyterre: J. Mater. Scl, 22, 1-16.
25. M. K. Surappa and P. K. Rohatgi: Met. Technol, 1978, 5, 358-361.
26. V. G. Gorbunov, U. D. Parshin, and V. V. Panin: Russ. Cast. Prod., Aug. 1974, 348.
27. J. TAFTO, K. KRISTIANSEN, H. WESTENGEN, A. NYGARD, J. B. Borradaile, and D. O. Karlsen: In ‘Cast Reinforced Metal Composites’, (Ed. S. G. Fishman and A. K. Dhingra), 71-75; Metals Park, OH, ASM International.
28. F. A. Badia: Trans AFS, 1971, 79, 347-350.
29. Alcan Aluminum Corp.: US Pat. 4 786 467, 1988.
30. J. B. Borradaile, S. Skjervold, and W. Ruch: In Extended Abstracts Of Conf. ‘Metal Matrix Composites: Property Optimisation and Applications’, London, 1989, The Institute Of Metals, Paper 10.1.
31. T. SRITHARAN, K. XIA, H. HEATHCOCK, and J. MIHELICH: In ‘Metal and Ceramic Matrix Composites: Processing, Modeling and Mechanical Behavior’, (Ed. R. B. Bhagat Et Al), 13-22; 1990, Warrendale, PA, The Metallurgical Society Of AIME.
32. D. J. Lloyd: In ‘High Performance Composites For The 1990s’, (Ed. S. K. Das), 33-45; 1990, Warrendale, PA, The Metallurgical Society Of AIME.
33. J. A. Cornie, H.-K. Moon, and M. C. Flemings: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 63-78; 1990, Materials Park, OH, ASM International.
34. R. Mehrabian, R. G. Riek, and M. C. Flemings: Metall. Trans., 1974, 5, 1899-1905.
35. R. Mehrabian, A. Sato, and M. C. Flemings: Light Met., 1975, 38, 177-193.
36. P. R. Gibson, A. J. Clegg, and A. A. Das: Foundry Trade J., Feb. 1982, 253-263.
37. Dow Chemical Co.: US Pat. 4 432 936.
38. E. M. Klier: SM Thesis, Massachusetts Institute Of Technology, 1988.
39. S. Caron and J. Masounave: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 107-113; 1990, Materials Park, OH, ASM International.
40. J. A. Cornie: Personal Communication, Kingston, ON, 1990.
41. A. W. Urquhart: Mater. Sci. Eng., 1991, A144, 75.
42. M. K. AGHAJANIAN, M. A. ROCAZELLA, J. T. BURKE, and S. D. Keck: J. Mater. Sci., 1991, 26, 447.
43. A. R. E. Singer: US Pat. 4 515 864, 1985.
44. Osprey Metals: UK Pat. 1 379 261, 1975.
45. Osprey Metals: UK Pat. 1 472 939, 1977.
46. United Kingdom Atomic Energy Authority: US Pat. 4 928 745, 1990.
47. T. C. Willis: Met. Mater., 1988, 4, (8), 485-488.
48. J. White, I. R. Hughes, T. C. Willis, and R. M. Jordan: In ‘Proc. 4th Int. Conf. On Aluminium-Lithium Alloys’, J. Phys., 1987, 48, (9), C3, 347-353.
49. Martin Marietta Corp.: US Pat. 4 915 908, 1990.
50. Martin Marietta Corp.: US Pat. 4 710 348, 1987.
51. R. M. Aikin, Jr: ‘The Mechanism Of Dispersion Strengthening and Fracture In Al-Based XD™ Alloys’, Contract Report 4276, National Aeronautics and Space Administration, Feb. 1990. US Pat. 4 808 372.
52. A. G. Metcalfe: ‘Composite Materials, Vol. 1 - Interfaces In Metal Matrix Composites’; 1974, New York, Academic Press.
53. A. Mortensen: In ‘Mechanical and Physical Behaviour Of Metallic and Ceramic Composites’, 9th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, (Ed. S. I. anderson Et Al), 141-155.
54. D. J. Lloyd and I. Jin: Metall. Trans., 1988, 19A, 3107-3109.
55. R. Warren and C. H. andersson: Composites, 1984, 15, 101-111.
56. D. J. Lloyd and E. Dewing: In Proc. Int. Symp. On ‘Advanced Structural Materials’, (Ed. D. S. Wilkinson), 71-77; 1988, Montreal, PQ, Pergamon Press.
57. D. J. Lloyd: Compos. Sci. Technol, 1989, 35, 159-179.
58. C. M. Gabryel and A. D. Mcleod: Metall Trans., 1992, 23A, 1279-1283.
59. K. L. Mampel: Z. Phys. Chem., 1940, A187, 43-57; 235-249.
60. J. G. Legoux, G. L’espérance, L. Salvo, and M. Suéry: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 31-39; 1990, Materials Park, OH, ASM International.
61. H. Ribes and M. Suéry: Scr. Metall, 1989, 23, 705-709.
62. M. C. Flemings: ‘Solidification Processing’; 1974, New York, Mcgraw-Hill.
63. D. G. THOMAS: J. Colloid Sci., 1965, 20, 267-277.
64. H.K. Moon: Phd Thesis, Massachusetts Institute Of Technology, 1990.
65. M. K. Surappa and P. K. Rohatgi: Metall Trans., 1981, 12B, 327-332.
66. J. A. Cornie: Personal Communication, Boston, MA, 1991.
67. W. H. Hunt, D. Richmond, and R. D. Young: In Proc. 6th Int. Conf. On ‘Composite Materials - ICCM VI’, (Ed. F. L. Matthews Et Al), 2.209-2.203; 1987, London, Elsevier Applied Science.
68. T. M. Osman, J. J. Lewandowski, and W. H. Hunt, Jr: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 209-216; 1990, Materials Park, OH, ASM International.
69. C. A. Rogers: ‘Packing and Covering’, Cambridge Mathematical Tracts, Vol. 54; 1964, Cambridge University Press.
70. J. F. Richardson and W. N. Zaki: Chem. Eng. Sci., 1954, 3, 65.
71. G. H. Geiger and D. R. Poirier: ‘Transport Phenomena In Metallurgy’; 1973, New York, Addison-Wesley.
72. I. Jin and D. J. Lloyd: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 47-52; 1990, Materials Park, OH, ASM International.
73. P. K. Rohatgi, R. Asthana, and S. Das: Int. Met. Rev., 1986, 31, 115-139.
74. D. M. Stefanescu and B. K. Dhindaw: In ‘Metals Handbook’, 9 Edn, Vol. 15, 142-147; 1988, Metals Park, OH, ASM International.
75. M. Taya, K. Muramatsu, D. J. Lloyd, and R. Watanabe: JSME Int. J., Ser. 1, 1991, 34, 198-206.
76. D. J. Lloyd: In ‘Metal Matrix Composites - Processing, Microstructure and Properties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 81-99.
77. F. J. HUMPHREYS: Acta Metall, 1977, 25, 1323-1344.
78. W. S. Miller and F. J. Humphreys: In ‘Fundamental Relationships Between Microstructures and Mechanical Properties Of Metal Matrix Composites’, (Ed. M. N. Gungor and P. K. Liaw), 517-541; 1989, Warrendale, PA, The Metallurgical Society Of AIME.
79. M. Ferry, P. Munroe, A. Crosky, and T. Chandra: In ‘Metal Matrix Composites - Processing, Microstructure and Prop-, Erties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 337-342.
80. M. W. Mahoney and A. K. Ghosh: Metall. Trans., 1987, 18A, 653-661.
81. M. MABUCHI, K. HIGASHI, Y. OKADA, S. TANIMURA, T. Imal, and K. Kubo: Scr. Metall. Mater., 1991, 25, 2003-2006.
82. M. MABUCHI, K. HIGASHI, S. WADA, and S. TANIMURA: Scr. Metall. Mater., 1992, 26, 1269-1274.
83. J. Pilling: Scr. Metall, 1989, 23, 1375-1380.
84. K. HIGASHI, T. OKADA, T. MUKAI, S. TANIMURA, T. G. NIEH, and J. Wadsworth: Scr. Metall. Mater., 1992, 26, 185-190.
85. G. NUSSBAUM, P. SAINFORT, G. REGAZZONI, and H. GJESTLAND: Scr. Metall, 1989, 23, 1079-1084.
86. T. G. NIEH and R. F. Karlek: Scr. Metall, 1984, 18, 25-28.
87. S. Nutt and R. W. Carpenter: Mater. Sci. Eng., 1985, 75, 169-177.
88. H. J. Rack: In Proc. 6th Int. Conf. On ‘Composite Materials - ICCM-VI’, (Ed. F. L. Matthews Et Al), 2.382-2.389; 1987, London, Elsevier Applied Science.
89. J. M. Papazian: Metall. Trans., 1988, 19A, 2945-2953.
90. P. B. Pragnell and W. M. Stobbs: In Proc. 7th Int. Symp. On ‘Composite Materials - ICCM-VIF, (Ed. Yunshu Et Al), 573-578; 1989, Oxford, Pergamon.
91. S. Suresh, T. Christman, and Y. Sugimura: Scr. Metall, 1989, 1599-1602.
92. K. K. CHAWLA, A. H. ESMAELI, A. K. DATYE, and A. K. VASUDEVAN: Scr. Metall. Mater., 1991, 25, 1315-1319.
93. E. Hunt, P. D. Pitcher, and P. J. Gregson: Scr. Metall, 1990, 937-941.
94. P. B. Prangnell and W. M. Stobbs: In ‘Metal Matrix Composites - Processing; Microstructure and Properties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 603-610.
95. S. Ceresara and P. Fiorini: Powder Metall., 1979, 22, (1), 1-4.
96. M. STRANGWOOD, C. A. HIPPSLEY, and J. J. LEWANDOWSKE: Scr. Metall, 1990, 24, 1483-1487.
97. I. Dulta, S. M. Allen, and J. L. Hafley: Metall. Trans., 1991, 22A, 2553-2563.
98. H. J. Rack and P. K. Chaudhury: In ‘Light-Weight Alloys For Aerospace Applications’, (Ed. E. W. Lee Et Al), 345-357; 1989, Warrendale, PA, The Minerals, Metals and Materials Society.
99. R. J. Arsenault and S. B. Wu: Mater. Sei. Eng., 1987, 96, 77-88.
100. J. C. Halpin: ‘Primer On Composite Materials: Analysis’, Rev. Edn, 130; 1984, Lancaster, PA, Technomic Publ.
101. M. Taya and R. J. Arsenault: Scr. Metall, 1987, 21, 349-354.
102. D. L. Mcdanels: Metall. Trans., 1985, 16A, 1105-1115.
103. F. J. Humphreys: In ‘Mechanical and Physical Behaviour Of Metallic and Ceramic Composites’, 9th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, (Ed. S. I. anderson Et Al), 51-74.
104. F. J. Humphreys, H. Basu, and M. R. Djazeb: In ‘Metal Matrix Composites - Processing, Microstructure and Properties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 51-66.
105. T. Christman, A. Needleman, and S. Suresh: Acta Metall, 1989, 37, 3029-3050.
106. V. Tvergaard: In ‘Metal Matrix Composites - Processing, Microstructure and Properties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 173-188.
107. A. Levy and J. M. Papazian: In ‘Metal Matrix Composites - Processing, Microstructure and Properties’, 12th Riso Int. Symp. On Metallurgy and Materials Science, Riso National Laboratory, Roskilde, Denmark, 1991, (N. Hansen Et Al), 475-482.
108. M. R. Piggott: ‘Load Bearing Fibre Composites’; 1980, Oxford, Pergamon Press.
109. V. C. Nardone and K. M. Prewo: Scr. Metall, 1986, 20, 43-48.
110. R. J. ARSENAULT and N. Shi: Mater. Sei. Eng., 1986, 81, 175-187.
111. M. TAYA, K. E. Lulay, and D. J. Lloyd: Acta Metall. Mater., 1991, 39, 73-87.
112. P. J. Withers, W. M. Stobbs, and O. B. Pedersen: Acta Metall, 37, 3061-3084.
113. M. Taya, K. E. Lulay, and D. J. Lloyd: In ‘Morris E. Fine Symp.’, (Ed. P. K. Liaw Et Al), 153-164; 1990, Warrendale, PA, The Metallurgical Society Of AIME.
114. M. S. Zedalis, P. S. Gilman, and S. K. Das: In ‘High Performance Composites For The 1990s’, (Ed. S. K. Das Et Al), 61-81; 1990, Warrendale, PA, The Metallurgical Society Of AIME.
115. R. DWIVEDI, G. ALTLand, P. BARRONANATOLIN, J. LEIGHTON, and F. G. Hamel: In ‘Int. Off Highway and Powerplant Cong.’, Milwaukee, WI, 1991, SAE Technical Paper 911770.
116. Y. Flom: Phd Thesis, University Of Maryland, 1987.
117. Y. Flom and R. J. Arsenault: In Proc. 6th Int. Conf. On ‘Composite Materials - ICCM-VT, (Ed. F. L. Matthews Et Al.), 2.189-2.208; 1987, London, Elsevier Applied Science.
118. D. J. Lloyd: Acta Metall Mater., 1991, 39, 59-71.
119. D. J. Lloyd, P. L. Morris, and E. Nehme: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 235-243; 1990, Materials Park, OH, ASM International.
120. D. C. Drucker: In ‘High Strength Materials’, (Ed. V. Zackay), 795-830; 1965, New York, Wiley.
121. G. BAO, J. W. HUTCHINSON, and R. M. Mcmeeking: Acta Metall. Mater., 1991, 39, 1871-1882.
122. P. F. Thomason: ‘Ductile Fracture Of Metals’; 1990, Oxford, Pergamon Press.
123. A. S. ARGON, J. IM, and R. Safoglu: Metall. Trans., 1975, 6A, 825-837.
124. T. MOCHIDA, M. Taya, and D. J. Lloyd: J. Jpn Inst. Met., 1991, 32,(10) 931.
125. A. Mortensen: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 235-243; Materials Park, OH, ASM International.
126. D. L. Davidson: In ‘Metal Matrix Composites: Mechanisms and Properties’, (Ed. R. K. Everett and R. J. Arsenault), 217-234; 1991, Boston, MA, Academic Press.
127. G. T. Hahn and A. R. Rosenfield: Metall. Trans., 1975, 6A, 653-668.
128. T. F. Klimowicz and K. S. Vecchio: In ‘Fundamental Relationships Between Microstructures and Mechanical Properties’, (Ed. M. N. Gungor and P. K. Liaw), 255-267; 1989, Warrendale, PA, The Metallurgical Society Of AIME.
129. M. Manoharan and J. J. Lewandowski: Acta Metall. Mater., 1990, 38, 489-496.
130. T. B. Cox and J. R. Low: NASA Tech. Rep. No. 3, NGR 38-087-003, 1972.
131. J. J. Stephens, J. P. Lucas, and F. M. Hoskins: Scr. Metall, 1988, 22, 1307-1312.
132. G. T. Krafft: Appl. Mater. Res., 1964, 1, 88-101.
133. E. E. Topur: Msc Thesis, Lehigh University, Bethlehem, PA, 1990.
134. P. F. Thomason: Acta Metall. Mater., 1992, 40, 241-249.
135. B. P. SOMERDAY, Y. LENG, F. E. WAWNER, and R. P. GANGLOFF: In ‘Advanced Metal Matrix Composites For Elevated Temperature’, (Ed. M. N. Gungor), 167-182; 1992, Materials Park, OH, ASM International.
136. B. Roebuck and J. D. Lord: Mater. Sci. Technol, 1990, 6, 1199-1209.
137. W. A. Logsdon and P. K. Liaw: Eng. Fract. Mech., 1986, 24, 737-751.
138. D. L. Davidson: Eng. Fract. Mech., 1989, 33, 965-977.
139. D. L. Davidson: Metall. Trans., 1991, 22A, 97-112.
140. J. K. Shang and R. O. Ritchie: In ‘Metal Matrix Composites: Mechanisms and Properties’, (Ed. R. K. Everett and R. J. Arsenault), 255-285; 1991, Boston, MA, Academic Press.
141. J. J. Bonnen, J. E. ALLISON, and J. E. Jones: Metall. Trans., 22A, 1007-1019.
142. D. R. Williams and M. E. Fine: In Proc. 5th Int. Conf. On ‘Composite Materials - ICCM-V’, (Ed. W. C. Harrigan, Jr Et Al), 639-670; 1985, Warrendale, PA, The Metallurgical Society Of AIME.
143. C. P. You and J. E. Allison: In Proc. 7th Int. Conf. On ‘Fracture’, 3005-3012; 1989, Pergamon Press.
144. J. K. SHANG, W. YU, and R. O. Ritchie: Mater. Sci Eng. A, 1988, 102, 181-192.
145. J. P. Bailon, J. Masounave, and C. Bathias: Scr. Metall, 1977, 11, 1101-1106.
146. T. G. Nieh, K. Xia, and T. G. Langdon: J. Eng. Mater. Technol. (Trans. ASME), 1988, 110, 77-82.
147. K. XIA, T. G. NIEH, J. WADSWORTH, and T. G. LANGDON: In ‘Fundamental Relationship Between Microstructure and Mechanical Properties Of Metal Matrix Composites’, (Ed. M. N. Gungor and P. K. Liaw), 543-556; 1989, Warrendale, PA, The Metallurgical Society Of AIME.
148. S. Pickard and B. Derby: In ‘Developments In The Science and Technology Of Composite Materials (ECCM3)’, (Ed. A. A. Bunsell Et Al), 199-204; 1989, Amsterdam, The Netherlands, Elsevier.
149. W. C. Oliver and W. D. Nix: Acta Metall, 1982, 30, 1335-1347.
150. K.T. Park, E. J. Lavernia, and F. A. Mohamed: Acta Metall. Mater., 1990, 38, 2149-2159.
151. A. B. Pandey, R. S. Misra, and Y. R. Mahajan: Acta Metall. Mater., 1992, 40, 2045-2052.
152. O. D. SHERBY, R. H. Klundt, and A. K. Miller: Metall. Trans., 1977, 8A, 843-850.
153. C. T. Lane: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 195-201; 1990, Materials Park, OH, ASM International.
154. ‘Machining Guidelines’, 1992, Duralcan Composites, San Diego, CA.
155. S. Brusethang, O. Reiso, and W. Ruch: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 173-179; 1990, Materials Park, OH, ASM International.
156. P. W. Jeffrey and S. Holcomb: In ‘Fabrication Of Particulates Reinforced Metal Composites’, (Ed. J. Masounave and F. G. Hamel), 181-186; 1990, Materials Park, OH, ASM International.
157. S. V. Prasad and P. K. Rohatgi: J. Met., 1987, 39, (1), 22-26.