Tool wear and surface roughness of Al2O3 particle-reinforced aluminium alloy composites

Journal of Materials Processing Technology

Volumn 128, Issue 1-3, 2002, Pages 280-291

  Sahin, Y ^a   Kok, M ^b   Celik, H ^c  

^a GAZI UNIVERSITY   (Turkey)

^b KAHRAMANMARAS SUTCU IMAM UNIVERSITY   (Turkey)

^c FIRAT UNIVERSITY   (Turkey)

Author keywords

Al2O3; Coated tools; Composites; Roughness; Tool life; Wear

Indexed keywords

ALUMINA; CARBIDE TOOLS; COATINGS; CUTTING TOOLS; METALLIC MATRIX COMPOSITES; SURFACE ROUGHNESS; WEAR OF MATERIALS;

COATED TOOLS;

ALUMINUM ALLOYS;

EID: 0037032165     PISSN: 09240136     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0924-0136(02)00467-3     Document Type: Article

References (56)

1. P. Rohatgi, Cast aluminium matrix composites for automotive applications, J. Organomet. Chem. (1991) 10-15.
2. J. Dinwoodie, Automotive applications for MMCs based on short staple alumina fibres, SAE Technical Paper Series, Int. Con. Exp., Detroit, Michigan, February 1987, pp. 23-27.
3. S.S. Joshi, N. Ramakrishnan, D. Sarathy, P. Ramakrishnan, Development of the technology for discontinuously reinforced aluminium composites, in: Integrated Design and Process Technology, The First Wold Conference on Integrated Design and Process Technology, Austin, Vol. 1, 1995, pp. 492-497.
4. M.J. Kocazac, S.C. Khatri, J.E. Allison, M.G. Bader, MMCs for ground vehicle, aerospace and industrial applications, in: Süresh et al. (Eds.), Fundamentals of Metal Matrix Composites, Butterworth, Guildford, UK, 1993, p. 297.
5. Chadwich G.A., Heath P.J. Machining of metal matrix composites Met. Mater. 2-6 1990 73-76.
6. C.T. Lane, Drilling and tapping of SiCp reinforced Al, in: Proceedings of the Machining of Composite Materials Conference, ASM International, Pittsburgh, PA, October 1993.
7. C. Lane, Machining discontinuously reinforced Al composites, in: Tool and Manufacturing Engineers, Handbook, Vol. 7, Society of Manufacturing Engineers, 1983.
8. C.T. Lane, Machining characteristics of particle-reinforced aluminium, in: Proceedings of the Conference Fabrication of Particulate Reinforced Metal Composites, 17-19 September 1990, Montreal, Canada.
9. Monaghan J., O'Reilly P. Machinability of Al alloy/SiC metal matrix composite Process. Adv. Mater. 2 1992 37-46.
10. Monaghan J., O'Reilly P. The drilling of an Al/SiC metal matrix composite J. Mater. Process. Technol. 33 1992 469-480.
11. Brun M.K., Lee M., Gorsler F. Wear characteristics of various hard materials for machining SiCp reinforced aluminium alloy Wear 104 1985 21-29.
12. R.T. Coelho, S. Yamada, T.L. Roux, D.K. Aspinwall, M.L.H. Wise, Conventional machining of an Al based SiC reinforced MMCs, in: Proceedings of 30th International Mattador Conference, Menchester, UK, 1993, p. 125.
13. Winert K. A consideration of tool wears mechanism when machining metal matrix composites Ann. CIRP 42 1 1993 95-98.
14. Tomac N., Tonnesson K. Machining of particulate Al matrix composites Ann. CIRP 41 1 1992 55-58.
15. M. Finn, A. Srivastava, Machining of advanced and engineered materials, in: Proceedings of the CSME Symposium, McMaster University, 1996, pp. 616-623.
16. L. Cronjager, D. Meister, Turning of MMCs, in: Proceedings of the Second European Conference on Advanced Materials and Processes, Cambridge, Vol. 2, 1982, pp. 73-80.
17. C. Lane, Machinability of Al composites as a function of matrix alloy and heat treatment, in: Proceedings of the Machining of Composites Materials Symposium, ASM Materials Week, Chicago, IL, 1992, pp. 3-15.
18. Yanming Q., Zehna Z. Tool wear and its mechanism for cutting SiCp reinforced Al matrix composites J. Mater. Process. Technol. 100 2000 194-199.
19. Quan Y.M., Zhou Z.H., Ye B.Y. Cutting process and chip appearance of Al matrix composites reinforced by SiC particles J. Mater. Process. Technol. 91 1999 231-235.
20. Joshi S.S., Ramakrishnan N., Ramakrishnan P. Analysis of chip breaking during orthogonal machining of Al/SiCp composites J. Mater. Process. Technol. 88 1999 90-96.
21. El-Gallab M., Sklad M. Machining of Al/SiCp metal matrix composites. Part I. Tool performance J. Mater. Process. Technol. 83 1998 151-158.
22. Looney L.A., Monaghan J.M., O'Reilly P., Taplin D.M.R. The turning of an Al/SiC metal composite J. Mater. Process. Technol. 33 1992 453-468.
23. Hung N.P., Boey F.Y.C., Khor K.A., Oh C.A., Lee H.F. Machinability of cast and powder formed aluminium alloys reinforced with SiC particles J. Mater. Process. Technol. 48 1-4 1995 291-297.
24. N.P. Hung, F.Y.C. Boey, K.A. Boey, K.A. Khor, Y.S. Phung, H.F. Lee, Machinability of cast and powder Al alloys reinforced with SiC, in: Proceedings of the Second Asia-Pacific Continental Conference on Material Processing, Singapore, 1994.
25. Chambers A.R., Stephens S.E. Machining of Al-5 Mg reinforced with 5 vol.% Saffil and 15 vol.% SiC fibres J. Mater. Sci. Eng. A 135 1990 287-290.
26. Lin J.T., Bhattacharya D., Lane C. Machinability of a silicon carbide reinforced aluminium metal matrix composite Wear 181 1995 883-888.
27. Cornjager L., Tonhessen K. Machinability of fibre-particulate aluminium matrix composites Ann. CIRP 41 1 1992 63-66.
28. C. Lane, M. Lennox, Economics of machining cast MMCs brakes rotors, Duralcan Report, 1994, pp. 1-8.
29. Caroline J.E., Hsi-Yung Feng A., Lau W.M. Machining of an aluminium/SiC composites using diamond inserts J. Mater. Process. Technol. 102 2000 25-29.
30. Hocheng H., Yen S.B., Ishihara T., Yen B.K. Fundamental turning characteristics of a tribology-favoured graphite Al alloy composites Mater. Sci. Eng. A 28 1997 883-997.
31. C. Lane, The effect of different reinforcements on PCD tool life for aluminium composite, Duralcan Report, 1995, pp. 1-6.
32. Yang B.-H., Wang C.-C. Machinability of SiCp reinforced Al alloy composite materials Light Met. 43 4 1993 187-192.
33. P. Chen, Y. Miyake, Machining characteristics of SiCw reinforced Al, in: Proceedings of the 1989 ASM International Conference Workshop on Machinability, Cincinnati, pp. 69-75.
34. 3-SiC short fibre-reinforced Al alloy composites J. Jpn. Int. Light Met. 41 4 1991 264-269.
35. Guu Y.Y., Lin J. Comparison of the tribological characteristics of titanium and titanium carbon nitride coating films Surf. Coat. Technol. 85 1996 146-155.
36. K. Weinert, D. Biermann, Turning of fibre and particulate reinforced aluminium, in: Processing of International Conference on Machining of Advanced Materials, Gaithersburg, MD, July 1993, pp. 437-453.
37. C. Lane, M. Finn, A comparison of PCD and CVD diamond in milling MMCs, in: Proceedings of the Symposium on Advances in Production and Fabrication of Light Metals and MMCs, CIM, Edmonton, Alta., Canada, August 1992.
38. Quigley Q., Monaghan J., O'Reilly P. Factors affecting the machinability of an Al/SiC metal matrix composites J. Mater. Process. Technol. 43 1994 21-36.
39. C. Lane, M. Finn, Observations on using CVD diamond in milling MMCs, in: Proceedings of the Symposium on Materials Issues in Machining and the Physics of the Machining Processes, TMS, Chicago, IL, November 1992.
40. Barnes S., Pashby I.R., Mok D.K. The effect of workpiece temperature on the machinability of an Al/SiC composites Trans. ASME, J. Manuf. Sci. Eng. 118 1996 422-427.
41. Berganann E., Kaufmoin H., Schmid R., Vogel J. Ion-plate titanium carbon nitride films Surf. Coat. Technol. 42 1990 237-251.
42. Durante S., Ruttelli G., Rabezzana F. Al-based MMC machining with diamond coated cutting tools Surf. Coat. Technol. 94-95 1997 623-640.
43. Cho S.S., Komvopoulos K. Wear mechanisms of multi-layer coated cemented carbide cutting tools Trans. ASME J. Tribol. 119 1997 8-17.
44. M. Kok, Ph.D. Thesis, Firat University, Institute of Science and Technology of Elazig, Turkey, 1999.
45. Oden M., Ericson T. Wear surface deformation in Alumina-SiCw composite due to surface machining J. Am. Ceram. Soc. 79 8 1996 2134-2140.
46. El-Gallab M., Sklad M. Machining of Al/SiCp metal matrix composites. Part II. Workpiece integrity J. Mater. Process. Technol. 83 1998 277-283.
47. A. Jawaid, S. Barnes, S.R. Ghadimzadeh, Drilling of particulate Al/SiCp MMCs, in: Proceedings of the Machining of Composite Materials Symposium Conference, Chicago, 1992, p. 35.
48. L. Cronjager, D. Meister, Drilling of fibre and particle-reinforced Al, in: Proceedings of the 14th ETCT Composite Material Technology, ASME, Houston, TX, 1991, pp. 20-33.
49. Cronjager L. Machining of fibre and particles reinforced aluminium Ann. CIRP 41 1992 63-66.
50. M.J. McGinty, C.W. Preus, in: V.K. Sarin (Ed.), Machining Ceramic Fibre Metal Matrix Composites, ASM Conference on High Productivity Machining, Materials and Processes, Cleveland, OH, 1985, pp. 231-240.
51. Duralcan Composites-Machining Guidelines, Duralcan Report, 1995, pp. 1-6.
52. Hung N.P., Yeo S.H., Qon B.E. Effects of cutting fluid on the machinability of metal matrix composites J. Mater. Process. Technol. 67 1997 157-161.
53. Seah K.H.W., Li X., Lee K.S. The effect of applying coolant on tool wear it metal machining J. Mater. Process. Technol. 48 1995 495-501.
54. Batzer S.A., Haan D.M., Rao D.D., Olun W.W., Sutherland J.W. Chip morphology and hole surface texture in the drilling of cast Al alloys J. Mater. Process. Technol. 79 1998 72-78.
55. Y. Sahin, Ph.D. Thesis, Aston University, Birmingham, UK, 1994.
56. Zhao Z., Zhijian S., Yingkun X. Effect of microstructure on the mechanical properties of an Al alloy 6061-SiC particle reinforced composite Mater. Sci. Eng. 132 1991 88-93.