Differences of the mechanical setup of hip simulators and their consequences on the outcome of hip wear testing

Journal of ASTM International

Volumn 3, Issue 8, 2006, Pages

  Reinisch, Georg ^a,b   Schoerg, Joachim ^c   Leder, Eva ^b   Judmann, Kurt P ^a   Plitz, Wolfgang ^d   Franek, Friedrich ^a  

^a VIENNA UNIVERSITY OF TECHNOLOGY   (Austria)

^b Biomechanische Forschungs Gesellschaft mbH   (Austria)

^c Otto Bock HealthCare GmbH   (Austria)

^d LUDWIG MAXIMILIANS UNIVERSITY   (Germany)

Author keywords

Artificial hip joint; Hip simulator; Tribology; Wear

Indexed keywords

BIOMATERIALS; BIOMEDICAL ENGINEERING; DATA REDUCTION; GAIT ANALYSIS; JOINTS (ANATOMY); STANDARDS; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE;

ARTIFICIAL HIP JOINT; HIP SIMULATORS; LOAD CURVES; WEAR TESTING;

HIP PROSTHESES;

EID: 33748522740     PISSN: None     EISSN: 1546962X     Source Type: Journal    
DOI: 10.1520/JAI100257     Document Type: Article

References (30)

1. Charnley, J., Low Friction Arthroplasty of the Hip - Theory and Practice, Springer-Verlag, Berlin, 1979.
2. Schmalzried, T. P., Jasty, M., and Harris, W. H., "Periprosthetic Bone Loss in Total Hip Arthroplasty: The Role of Polyethylene and the Concept of the Effective Joint Space," J. Bone Jt. Surg., Am. Vol. Vol. 74A, 1992, pp. 849-856.
3. Harris, W. H., "The Problem Is Osteolysis," Clin. Orthop. Relat. Res. Vol. 311, 1995, pp. 46-53.
4. ASTM Standard F 1714, "Standard Guide for Gravimetric Wear Assessment of Prosthetic Hip-Designs in Simulator Devices," Annual Books of ASTM Standards, Section 13, Vol. 13.01, West Conshohocken, PA, 1996 (reapproved 2002).
5. ISO Standard 14242, "Implants for Surgery-Wear of Total Hip Joint Prosthesis-Part 1: Loading and Displacement Parameters for Wear Testing Machines and Corresponding Environmental Conditions for Test," ISO, CH 1211, Geneva 20, 2000.
6. Johnston, R. C., and Smidt, G. L., "Measurement of Hip-Joint Motion During Walking. Evaluation of an Electrogoniometric Method," J. Bone Jt. Surg., Am. Vol. Vol. 51A, No. (6), 1969, pp. 1082-1094.
7. Paul, J. P., "Forces Transmitted by Joints in the Human Body," Proc. Inst. Mech. Eng. Vol. 181, 1966/67, pp. 8-15.
8. Woltring, H. J., "3-D Attitude Representation of Human Joints: A Standardization Proposal," J. Biomech. Vol. 27, No. (12), 1994, pp. 1399-1414.
9. BIOMCH-L. Various discussions in the archives (February, March 1990, January-May 1992) retrievable by sending commands of the form SEND BIOMECH-LOGyymm in the main body of an e-mail note to LISTERV@HEARN.BITNETor LISTSERV@NIC.SURFNET.NL, 1990, 1992.
10. Wittenburg, J., Dynamics of Systems of Rigid Bodies, Stuttgart: B. G. Teubner, 1977.
11. ISO Standard 10328, "Prosthetics - Structural Testing of Lower-Limb Prostheses," ISO, CH 1211, Geneva 20, 1996.
12. Wu, G., and Cavanagh, P. R., "ISB Recommendations for a Standardization in the Reporting of Kinematic Data," J. Biomech., Vol. 28, No. (10), 1995, pp. 1257-1261.
13. Wu, G., Siegler, S., Allard, P., Kirtley, C., Leardini, A., Rosenbaum, D., Whittle, M., D'Lima, D. D., Cristofolini, L., Witte, H., Schmid, O., and Stokes, I., "ISB Recommendation on Definitions of Joint Coordinate System of Various Joints for the Reporting of Human Joint Motion - Part 1 : Ankel, Hip, and Spine," J. Biomech., Vol. 35, No. (4), 2002, pp. 543-548.
14. Grood, E. S., and Suntay, W. J., "A Joint Coordinate System for the Clinical Description of Three-Dimensional Motions: Application to the Knee," J. Biomech. Eng., Vol. 105, 1983, pp. 136-144.
15. Andriacchi, T. P., and Hurwitz, D. E., "Gait Biomechanics and the Evolution of Total Joint Replacement," Gait and Posture, Vol. 5, 1997, pp. 256-264.
16. Medley, J. B., Krygier, J. J., Bobyn, J. D., Chan, F. W., Lippincott, A., and Tanzer, M., "Kinematics of the MATCO™ Hip Simulator and Issues Related to Wear Testing of Metal-Metal Implants," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 211, 1997, pp. 89-99.
17. Saikko, V., "A Three Axis Hip Joint Simulator for Wear and Friction Studies on Total Hip Prostheses," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 210, 1996, pp. 175-185.
18. Viceconti, M., Cavallotti, G., Andrisano, A. O., and Toni, A., "Discussion on the Design of a Hip Joint Simulator," Med. Eng. Phys., Vol. 18, No. (3), 1996, pp. 234-240.
19. Bergmann, G., Deuretzbacher, G., Heller, M., Graichen, F., Rohlmann, A., Strauss, J., and Duda, G. N., "Hip Contact Forces and Gait Patterns From Routine Activities," J. Biomech., Vol. 34, No. (7), 2001, pp. 859-871.
20. ISO Standard 14242, "Implants for Surgery-Wear of Total Hip Joint Prosthesis-Part 2: Methods of Measurement," ISO, CH 121.1, Geneva 20, 2000.
21. Bragdon, C. R., O'Connor, D. O., Lowenstein, J. D., Jasty, M., and Syniuta, W. D., "The Importance of Multidirectional Motion on the Wear of Polyethylene," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 210, 1996, pp. 157-165.
22. Wang, A., Polineni, V. K., Essner, A., Sokol, M., Sun, D. C., Stark, C., and Dumbleton, J. H., "The Significance of Nonlinear Motion in the Wear Screening of Orthopaedic Implant Materials," J. Test. Eval., Vol. 25, No. (2) 1997, pp. 239-245.
23. ISO/TR Technical Report 9326, "Implants for Surgery - Partial and Total Hip Joint Prostheses - Guidance for Laboratory Evaluation of Change of Form of Bearing Surfaces," ISO, CH 1211, Geneva, 20, 1989.
24. Saikko, V., and Calonius, O., "Slide Track Analysis of the Relative Motion Between Femoral Head and Acetabular Cup in Walking and in Hip Simulators," J. Biomech., Vol. 35, No. (4), 2002, pp. 455-464.
25. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., "3-Dimensional Sliding/Contact Computational Simulation of Total Hip Wear," Clin. Orthop. Relat. Res., Vol. 333, 1996, pp. 41-50.
26. Saikko, V., Calonius, O., and Keranen, J., "Effect of Extent of Motion and Type of Load on the Wear of Polyethylene in a Biaxial Hip Simulator,", Vol. 65B, No. (1), 2003, pp. 186-192.
27. Chan, F. W., Bobyn, J. D., Medley, J. B., Krygier, J. J., Tanzer, M., "Wear and Lubrication of Metal-on-Metal Hip Implants," Clin. Orthop. Relat. Res., Vol. 369, 1999, pp. 10-24.
28. Schey, J. A., "Systems View of Optimizing Metal on Metal Bearings," Clin. Orthop. Relat. Res., Vol. 329S, 1996, pp. S115-S127.
29. Lu, B., and McKellop, H., "Frictional Heating of Bearing Materials Tested in a Hip Joint Wear Simulator," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., Vol. 211, 1997, pp. 101-108.
30. Liao, Y. S., McKellop, H., Lu, Z., Campbell, P., and Benya, P., "The Effect of Frictional Heating and Forced Cooling on the Serum Lubricant and Wear of UHMW Polyethylene Cups Against Cobalt-Chromium and Zirconia Balls," Biomaterials, Vol. 24, No. (18), 2003, pp. 3047-3059.