A dynamic wall shear stress sensor based on ionic polymers

Proceedings of 2005 ASME Fluids Engineering Division Summer Meeting, FEDSM2005

Volumn 2005, Issue , 2005, Pages 2475-2484

  Etebari, A ^a   Benne, M D ^b   Leo, D J ^a   Vlachos, P P ^a  

^a Virginia Polytechnic Institute and State University   (United States)

^b Discover Technologies   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVE IONIC POLYMER TRANSDUCERS; FLUCTUATING SHEAR; MEASUREMENT RESPONSE; TIME-RESOLVED DIRECT SKIN FRICTION;

FREQUENCY RESPONSE; IONS; POLYMERS; PRESSURE MEASUREMENT; SENSORS; TRANSDUCERS;

SHEAR STRESS;

EID: 33646538466     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/FEDSM2005-77484     Document Type: Conference Paper

References (40)

1. Akle, B.J., Hickner, M., Leo, D.J., and McGrath, J.E., 2003, "Electroactive polymers based on novel ionomers," in Proceedings of 2003 ASME International Mechanical Engineering Congress & Exposition, (IMECE2003- 43561).
2. Arik, E., Modarress, D., Fourguette, D., Koochesfahani, M. and Gonzalez, P., 2004, "Optical Measurements of Wall Shear Stress with Emphasis on Flows Near Separation," 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, Portland, Oregon, June 28-1, AIAA-2004-2394.
3. Bennett, M. D. and Leo D. J., 2003, "Manufacture and characterization of ionic polymer transducers employing non-precious metal electrodes." Smart Materials and Structures, 12:424-436.
4. Bennett, M. D. and Leo, D. J., 2004, "Ionic liquids as stable solvents for ionic polymer transducers," Sensors and Actuators A: Physical, 115:79-90.
5. Bowersox, R.D.W., Schetz, J.A., Chadwick, K., Deiwert, S., "Measurement of skin friction in high enthalpy impulsive scramjet flow fields," AIAA Journal, 1995.
6. Chadwick, K.M., DeTurris, D.J., Schetz, J.A., 1992, "Direct measurements of skin friction in supersonic combustion flow fields, ASME, International Gas Turbine and Aeroengine Congress and Exposition, 37th, Cologne, Germany.
7. Chew, Y. T.; Khoo, B. C.; Lim, P. C.; and Teo, C. J., 1998, "Dynamic response of a hot-wire anemometer: Part II: A flush-mounted hot-wire and hot-film probes for wall shear stress measurements," Measurement Science and Technology, 9:764-778
8. Etebari, A., Akle, B., Farinholt, K., Bennett, M.D., Leo, D.J., Vlachos, P.P., 2004, "The use of active ionic polymers in dynamic skin friction measurements," Proceedings of the 2004 ASME HTFED, paper#: HT-FED2004-56837.
9. Farinholt, K. and Leo, D.J., 2004, "Modeling of electromechanical charge sensing in ionic polymer transducers," Mechanics of Materials, 36:421-433.
10. Farinholt, K. M. Newbury, M. Bennett, D. J. Leo, 2003, "An Investigation into the Relationship between Charge and Strain in Ionic Polymer Sensors", Proceedings of the First World Congress on Biomimetics and Artificial Muscles.
11. Fourgette, D., Modarress, D., Taugwalder, F., Wilson, D., Koochesfahani, M., Gharib, M., 2001, "Miniature and MOEMS Flow Sensors," 31st Fluid Dynamics Conference & Exhibit Anaheim, CA, AIAA-2001-2982.
12. th Aerospace Sciences Meeting and Exhibit: AIAA-03-0742.
13. th Aerospace Sciences Meeting and Exhibit: AIAA-02-0252.
14. Huang, J.B., Jiang, F.K., Tai, Y.C., Ho, C.M., 1999, "A micro-electro-mechanical-system based thermal shear-stress sensor with serf-frequency compensation," Measurement Science and Technology, 10:687-696.
15. Lofdahl, L., Chernoray, V., Haasl, S., Stemme, G., Sen, M., 2003, "Characteristics of a hot-wire microsensor for time-dependent wall shear stress measurements," Experiments in Fluids, 35:240-251.
16. Lofdahl, L., Gad-el-Hak, M., 1999, "MEMS-based pressure and shear stress sensors for turbulent flows," Measurement Science and Technology, 10:665-686.
17. MacLean, M. and Schetz, J. A., 2003, "Numerical study of detailed flow affecting a direct measuring skin-friction guage," AIAA Journal, 41:1271-1281
18. th International Symposium - Applications of Laser Techniques to Fluid Mechanics, 10-13, July 2002, paper 7.2.
19. Modarress, D., Taugwalder, F., Koochesfahani, M., 2003, "Optical Measurement of Wall Shear in High Reynolds Number Flows," American Physical Society, Division of Fluid Dynamics 56th Annual Meeting, November 23-25, 2003, East Rutherford, New Jersey, MEETING ID: DFD03, abstract #MA.006.
20. Naughton, J. W. and Sheplak, M., 2002, "Modern developments in shear stress measurements," AIAA paper 515-570.
21. Nemat-Nasser, S. and Li, J., 2000 "Electromechanical response of ionic polymer metal composites," in Proceedings of the SPIE, 3987, pp. 82-91.
22. Nemat-Nasser, S., 2002, "Micro-mechanics of actuation of ionic polymer-metal composites," Journal of Applied Physics 92(5), pp. 2899-2915.
23. Newbury, K.M. and Leo, D.J., 2001, "Mechanical work and electromechanical coupling in ionic polymer bender actuators," 2001 ASME International Mechanical Engineering Congress and Exposition, New York, NY, 11-16 Nov., pp. 53-62.
24. Newbury, K.M. and Leo, D.J., 2002, "Electromechanical modeling and characterization of ionic polymer benders," Journal of Intelligent Material Systems and Structures 13(1), pp. 51-60.
25. Newbury, K.M. and Leo, D.J., 2003a, "Linear electromechanical model of ionic polymer transducers part I: Model development," Journal of Intelligent Material Systems and Structures, 14(6), pp. 333-342.
26. Newbury, K.M. and Leo, D.J., 2003b "Linear electromechanical model of ionic polymer transducers part II: Experimental validation," Journal of Intelligent Material Systems and Structures, 14(6), pp. 343-358.
27. Novean, M.G., Schetz, J.A., Bowersox, R.D.W., 1997, "Measurement of skin friction in complex supersonic flows," AIAA Paper 97-0394, 35th Aerospace Sciences Meeting & Exhibit, January 1997.
28. Nowak, M., 2002, "Wall shear stress measurement in a turbulent pipe flow using ultrasound Doppler velocimetry," Experiments in Fluids, 33:249-255.
29. Oguro, K., 1993, "Actuator element," US Patent 5,268,082.
30. Ruedi, J.-D., Nagib, H., Osterlund, J., Monkewitz, P.A., "Evaluation of three techniques for wall-shear measurements in three-dimensional flows," Experiments in Fluids, 35:389-396.
31. Ruedi, J.-D., Nagib, H., Osterlund, J., Monkewitz, P.A., 2004, "Unsteady wall-shear measurements in turbulent boundary layers using MEMS," Experiments in Fluids, 36:393-398.
32. Sadeghipour, K., Salomon, R., Neogi, S., 1992, "Development of an electrochemically active and 'smart' material based vibration sensor/damper," Smart Materials and Structures, 1:172-179.
33. Schetz, J.A., 1997, "Direct measurements of skin friction in complex flows," Applied Mechanics Review, Vol. 50, No. 11, Pt. 2, Nov.
34. Schetz, J.A., Diller, T.E., Wicks, A.L., 1992, "Skin friction measurements in high temperature high speed flows," The 1992 NASA Langley Measurement Technology Conference: Measurement Technology for Aerospace Applications in High-Temperature Environments p 171-188.
35. Schober, M., Obermeier, E., Pirskawetz, S., Fernholz, H.-H., 2004, "A MEMS skin-friction sensor for time resolved measurements in separated flows," Experiments in Fluids, 36:593-599.
36. Shahinpoor, M., Bar-Cohen, Y., Simpson, J., and Smith, J., 1998, "Ionic polymer-metal composites (IPMCs) as biomimetic sensors, Actuators and Artificial Muscles - a Review," Smart Materials and Structures Int. Journal, 7, pp. R15-R30.
37. Sheplak, M., Chandrasekaran, V., and Cain, A., 2002, " Characterization of a silicon-micromachined thermal shear-stress sensor," AIAA Journal, 50:6:1099-1104.
38. Sheplak, M., Padmanabhan, A., Schmidt, M.A., Breuer, K.S., 2001, "Dynamic calibration of a shear-stress sensor using Stokes-layer excitation," AIAA Journal, 39:5:819-823.
39. Smith, T.B., Schetz, J.A., 2000, "Direct skin friction measurement in a rocket-based-combined-cycle scramjet combustor," AIAA-2000-3724, 36th Joint Propulsion Conference, July 2000.
40. White, F.M., 1991, Viscous Fluid Flow, WCB/McGraw-Hill.