Structural evolution of spray-formed Al-70wt.%Si alloys during isothermal holding in the semi-solid state

Rare Metals

Volumn 24, Issue 4, 2005, Pages 317-324

  Zhang, Di ^a   Cui, Hua ^a   Wei, Yanguang ^b   Zhang, Jishan ^a   Zhang, Yongan ^b   Xiong, Baiqing ^b  

^a UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING   (China)

^b GENERAL RESEARCH INSTITUTE FOR NONFERROUS METALS   (China)

Author keywords

Al 70wt. Si alloys; Grain growth behavior; Materials science; Semi solid processing; Spray forming

Indexed keywords

ALUMINUM ALLOYS; CHARACTERIZATION; GRAIN GROWTH; ISOTHERMS; POROSITY; SILICON ALLOYS; SPRAYING; STRUCTURE (COMPOSITION); TEMPERATURE;

ISOTHERMAL HOLDING; ISOTHERMALLY HEAT-TREATED; SEMI-SOLID PROCESSING; SPRAY FORMING;

MICROSTRUCTURE;

EID: 33644937262     PISSN: 10010521     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (21)

1. Spencer D.B., Mehrabian R., and Flemings M.C., Rheological behavior of Sn-15%Pb in the crystallization range, Metall Trans. A., 1972, 3: 1925.
2. Brown S.B. and Flemings M.C., Net-shape forming via semi-solid processing, Adv. Mater. Processes, 1993, 1: 36.
3. Flemings M.C., Behavior of metals and alloys in the semi-solid state, Metall Trans. A, 1991, 22: 957.
4. Flemings M.C., Rick R.U., and Yong K.P., Rheocasting, Mater. Sci. Eng., 1976, 125(1-2): 103.
5. Ward P.J., Atkinson H.V., and Anderson P.R.G., Semi-solid processing of novel MMCs based on hypereutectic aluminium-silicon alloys, Acta. Metall, 1996, 44(5): 1717.
6. Tzimas E. and Zavaliangos A., Mechanical behavior of alloys with equiaxed microstructures in the semi-solid state at high solid content, Acta. Metall., 1999, 47(2): 517.
7. Kopp R., Choi J., and Dag N., Simple compression test and simulation of Sn-15%Pb alloys in the semi-solid state, J. Mater. Process. Technol., 2003, 135(3): 317.
8. Kang C.G., Choi J.S., and Kim K.H., The effect of strain rate on microscopic behavior in the compression forming of semi-solid aluminium alloy, J. Mater. Process. Technol., 1999, 88(2): 159.
9. Jacobson D.M., Lightweight electronic packaging technology based on spray formed Si-Al, Powder Metall., 2000, 43: 200.
10. Sangha S.P.S., Jacobson D.M., and Ogilvy A.J.W., Novel aluminium-silicon alloys for electronics packaging, Eng. Sci. Educ. J., 1997, 10: 195.
11. Jacobson D.M., Spray-formed silicon-aluminium alloys, Adv. Mater. Processes, 2000, 3: 36.
12. Gebelin J.C., Suery M., and Favier D., Characterization of the rheological behavior in the semi-solid state of grain-refined AZ91 magnesium alloys, Mater. Sci. Eng. A, 1999, 272(1): 134.
13. Manson-Whitton E.D., Stone I.C., and Jones J.R., Isothermal grain coarsening of spray-formed alloys in the semi-solid state, Acta. Metall., 2002, 50(10): 2517.
14. Evangelos T. and Antonios Z., Evolution of near-equiaxed microstructure in the semi-solid state, Mater. Sci. Eng. A, 2000, 289(2): 228.
15. Liu H.M., Cui H., Yang B., and Zhang J.S., Isothermal grain growth of reactive spray-formed 7075 alloys in the semi-solid state, J. Univ. Sci. Technol. Beijing, 2004, 11(5): 411.
16. Wang J.L., Su Y.H., and Tsao C.Y.A., Structural evolution of conventional cast dendritic and spray-cast nondendritic structures during isothermal holding in the semi-solid state, Scripta Mater., 1997, 37(12): 2003.
17. 3 composite in the present of a liquid phase, Mater. Sci. Eng. A, 1997, 230(1): 1.
18. Lavernia E.J. and Wu Y., Spray Atomization and Deposition, John Wiley and Sons, New York, 1996: 343.
19. p composite influence of porosity, Mater. Sci. Eng. A, 2003, 360(2): 365.
20. Duncan A.J., Hans Q., and Viswanathan S., Measurement of liquid permeability in the mushy zone of aluminium-copper alloys, Metall. Mater. Trans. B, 1999, 30(4): 745.
21. Rough S.L., Bridgwater J., and Wilson D.I., In-situ measurements of porosities and permeabilities of alumina pastes, Powder Technol., 2002, 123(3): 262.