Japanese research and development on metallic biomedical, dental, and healthcare materials

JOM

Volumn 57, Issue 4, 2005, Pages 18-24

  Niinomi, Mitsuo ^a   Hanawa, Takao ^b   Narushima, Takayuki ^c  

^a TOYOHASHI UNIVERSITY OF TECHNOLOGY   (Japan)

^b TOKYO MEDICAL AND DENTAL UNIVERSITY   (Japan)

^c TOHOKU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

BIOCOMPATIBILITY; BIOMATERIALS; COBALT ALLOYS; DENTAL ALLOYS; DENTAL PROSTHESES; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; RESEARCH AND DEVELOPMENT MANAGEMENT; STAINLESS STEEL; TITANIUM ALLOYS; TOXICITY;

CYTO-TOXICITY; HEALTHCARE MATERIALS; JAPAN INSTITUTE OF METALS (CO); METALLIC BIOMEDICAL MATERIALS;

MATERIALS SCIENCE;

EID: 19844376749     PISSN: 10474838     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11837-005-0076-3     Document Type: Article

References (88)

1. M. Niinomi et al., "Development of Low Rigidity β-type Titanium Alloy for Biomedical Applications," Mater. Trans., 43 (12) (2002).
2. M. Niinomi, T. Hattori, and S. Niwa, "Material Characteristics and Biocompatibility of Low Rigidity Titanium Alloys for Biomedical Applications," Biomaterials in Orthopedics, ed. M.J. Yaszemski et al. (New York: Marcel Dekker, Inc., 2004), pp. 41-62.
3. M. Niinomi et al., "Dental Precision Casting of Ti29Nb-13Ta-4.6Zr Using Calcia Mold," Mater. Sci. Forum, 475-479 (2005), pp. 2303-2308.
4. M. Niinomi et al., "Mechanical Properties and Cytotoxicity of Newly Designed Beta Type Titanium Alloys with Low Melting Points for Dental Applications," Mater. Sci. and Eng. C, in press.
5. A. Ozawa et al., J. Jpn Soc. Dental Mater. Dev., Special Issue 38, 20 (2001).
6. H. Kawasaki et al., "Mechanical Properties of Ti-Fe-Ta System Alloys for Biomedical Applications," Proc. Fall Meet. Jpn. Inst. Met. (2003), p. 130.
7. A. Ou et al., "Properties of Ti-Zr-Nb-Ta System Bio-Soft Titanium Alloy," Proc. Annl. Meet. Jpn. Inst. Met. (Sendai, Japan: Japan Institute of Metals, 2003), p. 326.
8. Y.L. Zhou et al., "Effect of Ta Content on Young's Modulus and Microstructure of Binary Ti-Ta Alloys," Proc. ATEM'03 (2003), CD-ROM.
9. Y.L. Zhou, M. Niinomi, and T. Akahori, "Decomposition of Martensite α" during Aging Treatments and Resulting Mechanical Properties of Ti-Ta Alloys," Mater. Sci. Eng. A., A371 (2004), pp. 283-290.
10. Y.L. Zhou, M. Niinomi, and T. Akahori, "Dynamic Young's Modulus and Mechanical Properties of Ti-Hf Alloys," Mater. Transactions, 45 (5) (2004), pp. 1549-1554.
11. P.J. Uggowitzer, W.F. Bähre, and M.O. Speidel, "Metal Injection Molding of Ni-Free Stainless Steels," Proc. Adv. Powder Metal, Part Mater., vol. 3 (1997), pp. 18-113-18-121.
12. T. Yoneyama et al., "Mechanical Properties and Phase Transformation of Ti-Ni Super Elastic Alloy for Dental Application," Proc. of 4th Asian International Symposium on Biomaterials (AISB4) and 2nd International Symposium on Fusion of Nano and Bio TechnologiesISB4 and FNB2004, Tsukuba, Japan, pp. 241-242.
13. M. Okuyama et al., "Effect of Plasma Spray and Surface Sealing Treatment of Ni-Ti Shape Memory Alloy Applying to Biomaterials," Mater. Trans., 45 (4) (2004), pp. 1045-1053.
14. Y. Ogata et al., "Tensile Strength and Pseudoelasticity of YAG Laser Spot Melted Ti-Ni Shape Memory Alloy Wire," Mater. Trans., 45 (4) (2004), pp. 1070-1076.
15. K. Nitta et al., "Ni-Free Ti-Nb-Sn Shape Memory Alloys," Structural Biomaterials for the 21st Century, ed. M. Niinomi et al. (Warrendale, PA: TMS, 2001).
16. H.Y. Kim et al., "Mechanical Properties and Shape Memory Behavior of Ti-Mo-Ga Alloys," Mater. Trans., 45 (4) (2004), pp. 1090-1095.
17. T. Inamura et al., "Relationship between Texture and Macroscopic Transformation Strain in Severely Cold-Rolled Ti-Nb-Al Super Elastic Alloy," Mater. Trans., 45 (4)(2004), pp. 1083-1089.
18. H. Hosoda, N. Hosoda, and S. Miyazaki, "Mechanical Properties of Ti-Mo-Al Biomedical Shape Memory Alloys," Trans. MRSJ, 26 (1) (2001), pp. 243-246.
19. M. Ikeda, S. Komatsu, and Y. Nakamura, "Effects of Sn and Zr Additions on Phase Constitution and Aging Behavior of Ti-50 Mass% Ta Alloys Quenched from Single Phase Region," Mater. Trans., 45 (4) (2004), pp. 1106-1112.
20. K. Toyoshima, T. Hirasawa, and M. Ikeda, "Effect of Zr Addition on Phase Constitution and Heat Treatment Behavior of Ti-35 Mass% Nb Alloy," Proc. Ann. Meet. Jpn. Inst. Met. (Sendai, Japan: Japan Institute of Metals, 2003), p. 130.
21. T. Maeshima and M. Nishida, "Shape Memory and Mechanical Properties of Biomedical Ti-Sc-Mo Alloy," Mater. Trans., 45 (4) (2004), pp. 1101-1105.
22. T. Maeshima and M. Nishida, "Shape Memory Properties of Biomedical Ti-Mo-Ag and Ti-Mo-Sn Alloys," Mater. Trans., 45 (4) (2004), pp. 1096-1100.
23. N. Sakaguchi, M. Niinomi, and T. Akahori, "Deformation Behaviors of Ti-Nb-Ta-Zr System Alloys for Biomedical Applications," Mater. Trans., 45 (4) (2004), pp. 1113-1119.
24. H. Hosoda and S. Miyazaki, "Recent Topics of Shape Memory Materials and Related Technology," J. Jpn. Soc. Mechanical Engineers, 107 (1028) (2004), pp. 5O9-52O.
25. M. Niinomi, "Recent Research and Development in Titanium Alloys for Biomedical Applications and Healthcare Goods," Science and Technology for Advanced Materials, 4 (2003), pp. 445-454.
26. Y. Okazaki, "Implant Applications of Highly Corrosion-resistant Ti-15Zr-4Nb-4Ta Alloy," Mater. Trans., 43 (12) (2002), pp. 2936-2942.
27. Y. Okazaki, "Dental Casting Properties of Ti-15Zr-4Nb-4Ta Alloy," Mater. Trans., 43 (12) (2002), pp. 3134-3141.
28. V. Srimaneepong et al., "Strain and Displacement of Pt-6Al-7Nb Alloy Casting for Removable Partial Denture Frameworks," Proc. of 4th Asian International Symposium on Biomaterials (AISB4) and 2nd International Symposium on Fusion of Nano and Bio Technologies, Tsukuba, Japan, pp. 237-238.
29. M. Ikeda, "The Effect of Cooling Rate from Solution Treatment Temperature on Phase Constitution and Tensile Properties of Pt-4.3Fe-7.1Cr-3.0Al Alloy," Mater. Trans., 45 (5) (2004), pp. 1566-1576.
30. T. Hanawa et al., "Properties of Ni-Free Stainless Steel for Biomedical and Dental Use," Proc. of 4th Asian International Symposium on Biomaterials (AISB4) and 2nd International Symposium on Fusion of Nano and Bio Technologies, Tsukuba, Japan, pp. 67-69.
31. D. Kuroda et al., "Characterization of the Surface Oxide Film of Nickel-free Austenitic Stainless Steel Located in Simulated Body Environments," Mater. Trans., 43 (12) (2002), pp. 3093-3099.
32. D. Kuroda et al., "Corrosion Behavior of Nickel-Free Nitrogen Austenitic Stainless Steel in Simulated Body Environment," Mater. Trans., 43 (12) (2002), pp. 3100-3104.
33. A. Yamamoto et al., "Cytotoxicity Evaluation of Ni-free Stainless Steel Manufactured by Nitrogen Absorption Treatment," Mater. Sci. Eng., C24 (2004), pp. 737-744.
34. K. Uenishi et al., "Microstructure and Tensile Strength of Stainless Steel Wires Micro Spot Melted by YAG Laser," Mater. Trans., 43 (12) (2002), pp. 3065-3071.
35. A. Chiba et al., "Mechanical Properties of Forged Low Ni and C-Containing Co-Cr-Mo Biomedical Implant Alloy," Mater. Sci. Forum, 475-479 (2005), pp. 2317-2322.
36. A.J.T. Clemow and B.L. Daniell, Wear, 61 (1980) 291-231.
37. C.V. Cooper et al., Transactions of the ASME, 111 (1989), 668.
38. T. Mizumoto et al., "Fatigue Properties of Cast Ag-Pd-Cu-Au-Zn Alloy for Dental Applications in the Relation with Casting Defects," Mater. Trans., 43 (12) (2002), pp. 3160-3166.
39. S. Takahashi et al., "Effect of Precipitated β Phase on Fracture Toughness of Ag-Pd-Cu-Au Alloy," Jpn. J. Dent. Mater., 19 (2) (2000), pp. 162-169.
40. A. Inoue, "Stabilization of Metallic Supercooled Liquid and Bulk Amorphous Alloys," Acta Mater., 48 (2000), pp. 279-306.
41. S. Hiromoto et al., "Corrosion Behavior of Zirconium Based Amorphous Alloys for Biomedical Use," Mater. Trans., 42 (4) (2001), pp. 656-659.
42. x Amorphous Alloys in Phosphate Buffered Saline Solution," Corros. Sci., 43 (2001), pp. 1767-1779.
43. S. Hiromolo et al., "Surface Characterization of Amorphous Zr-Al-(Ni,Cu) Alloys Immersed in Cell-Culture Medium," Mater. Trans., 43 (2) (2002), pp. 261-266.
44. T. Hanawa and M. Ota, "Calcium Phosphate Naturally Formed on Titanium in Electrolyte Solution," Biomaterials, 12 (1991), pp. 767-774.
45. T. Hanawa, "Titanium and Its Oxide Film: a Substrate for Formation of Apatite," The Bone-Biomaterial Interface, ed. J.E. Davies (Toronto, Canada: University of Toronto Press, 1991), pp. 49-61.
46. T. Hanawa and M. Ota, "Characterization of Surface Film Formed on Titanium in Electrolyte," Appl. Surf. Sci., 55 (1992), pp. 269-276.
47. T. Hanawa, O. Okuno, and H. Hamanaka, "Compositional Change in Surface of Pt-Zr Alloys in Artificial Bioliquid," J. Jpn. Inst. Met., 56 (1992), pp. 1168-1173.
48. T. Hanawa et al., "Surface Oxide Films on Titanium Alloys Regenerated in Hanks' Solution," Mater. Trans., 43 (2002), pp. 3000-3004.
49. S. Hiromoto et al., "Comparison of Surface Oxide Film of Titanium with Culturing Murine Fibroblasts L929," Biomaterials, 25 (2004), pp. 979-986.
50. T. Hanawa, S. Hiromoto, and K. Asami, "Characterization of the Surface Oxide Film of a Co-Cr-Mo Alloy after Being Located in Quasi-biological Environments using XPS," Appl. Surf. Sci., 183 (2001), pp. 68-75.
51. T. Hanawa et al., "XPS Characterization of the Surface Oxide Film of 316L Stainless Samples that Were Located in Quasi-biological Environments," Mater. Trans., 43 (2002), pp. 3088-3092.
52. Y. Okazaki and E. Gotoh, "Comparison of Metal Release from Various Metallic Biomaterials in Vitro," Biomaterials, 26 (2005), pp. 11-21.
53. Y. Okazaki et al., "Comparison of Metal Concentrations in Rat Tibia Tissues with Various Metallic Implants," Biomaterials, 25 (2004), pp. 5913-5920.
54. T. Hanawa et al., "Effect of Biological Factors on the Repassivation Current of Titanium," Mater. Trans., 45 (5) (2004), pp. 1635-1639.
55. S. Hiromoto, K. Noda, and T. Hanawa, "Development of Electrolytic Cell with Cell-culture for Metallic Biomaterials," Corros. Sci., 44 (2002), pp. 955-965.
56. S. Hiromoto, K. Noda, and T. Hanawa, "Electrochemical Properties of an Interface between Titanium and Fibroblasts L929," Electrochim. Acta, 48 (2002), pp. 387-396.
57. A. Yamamoto et al., "Cytotoxicity Evaluation of 43 Metal Salts Using Murine Fibroblasts and Osteoblastic Cells," J. Biomed. Mater. Res., 39 (1998), pp. 331-340.
58. A. Yamamoto et al., "Mutagenicity Evaluation of Forty-one Metal Salts by the Umu Test," J. Biomed. Mater. Res., 59 (2002), pp. 176-183.
59. Y. Okazaki and E. Gotoh, "Effect of Metal Released from Pt Alloy Wear Powder on Cell Viability," Mater. Trans. JIM, 41 (9) (2000), pp. 1247-1255.
60. A. Yamamoto et al., "Cytotoxicity Evaluation of Ceramic Particles of Different Sizes and Shapes," J. Biomed. Mater. Res., 68A (2004), pp. 244-256.
61. Y. Mu et al., "Metal Ion Release from Titanium with Active Oxygen Species Generated by Rat Macrophages in vitro," J. Biomed. Mater. Res., 49 (2000), pp. 238-243.
62. A. Yamamoto et al., "Cytotoxicity of Pseudo-Body Fluids as Environment of Fretting Fatigue Test of Metallic Biomaterials," Proc. 4th Jpn. International SAMPE Symp. (Covina, California: SAMPE 1995), p. 638.
63. M. Yoshinari et al., "Dry-Process Surface Modification for Titanium Dental Implants," Metall. Mater. Trans. A, 33A (2002), pp. 511-519.
64. T. Kasuga et al., "Calcium Phosphate Invert Glass-Ceramic Coatings Joined by Self-Development of Compositionally Gradient Layers on a Titanium Alloy," Biomaterials, 22 (2001), pp. 577-582.
65. M. Okido et al., "Hydroxyapatite Coating on Titanium by Means of Thermal Substrate Method in Aqueous Solutions," Solid State Ionics, 151 (2002), pp. 47-52.
66. K. van Dijk et al., "Measurement and Control of Interface Strength of RF Magnetron-Sputtered Ca-PO Coatings on Pt-6Al-4V Substrates Using a Laser Spallation Technique," J. Biomed. Mater. Res., 41 (1998), pp. 624-632.
67. R. Takamura et al., "The Bone Response of Titanium Implant with Calcium Ion Implantation," J. Dent. Res., 76 (5) (1997), p. 1177.
68. 3 Thin Films in Simulated Body Fluids," Mater. Trans., 45 (5) (2004), pp. 1778-1781.
69. T. Nakano et al., "Unique Alignment and Texture of Biological Apatite Crystallites in Typical Calcified Tissue Analyzed by Microbeam X-ray Diffractometer System," Bone, 31 (4) (2002), pp. 479-487.
70. T. Nakano et al., "Synthesis of Apatite Ceramics with Preferential Crystal Orientation," Mater. Sci. Forum, 449-452 (2004), pp. 1289-1292.
71. K. Inoue et al., "Control of Crystal Orientation of Hydroxyapatite by Using a High Magnetic Field," Key Eng. Mater., 240-2 (2003), pp. 513-516.
72. M. Niinomi, "Fatigue Characteristics and Microstructure of Titanium Alloys for Biomedical Applications," Proc. Fatigue 2002, Vol. 3/ 5, ed. A.F Blom (Barnsley, England: EMAS Publishing, 2002), pp. 2073-2083.
73. M. Niinomi, "Cyto-toxicity and Fatigue Performance of Low Rigidity Titanium Alloy, Pt-29Nb-13Ta-4.6Zr, for Biomedical Applications," Biomaterials, 24 (2003), pp. 2673-2683.
74. M. Niinomi et al., "Fretting Fatigue Characteristics in Air and Simulated Body Environment of Newly Developed β Type Titanium Alloy for Biomedical Applications," J. Iron and Steel Inst. Jpn., 88 (9) (2002), pp. 553-560.
75. N. Mruyama et al., "Effect of Stress Frequency of Fatigue and Fretting Fatigue Life for Commercially Pure Pt and Pt-6Al-4V Alloy in Pseudo-Body Fluid," J. Jpn. Inst. Biomaterials, 18 (1) (2000), pp. 17-23.
76. S.J. Li et al., "Wear Characteristics of Pt-Nb-Ta-Zr and Pt-6Al-4V Alloys for Biomedical Applications," Wear, 257 (2004), pp. 869-876.
77. K. Ueda et al., "Wear Loss and Elution of C.P. Pt and Titanium Alloys in Simulated Body Fluid," Mater. Sci. Forum, 475-479 (2005), pp. 2333-2336.
78. Y. Tamura et al., "Mechanical Properties of Surface Nitrided Titanium for Abrasion Resistant Implant Materials," Mater. Trans., 43 (12) (2002), pp. 3043- 3051.
79. T. Akahori et al., "Effect of Thermomechanical Treatment on Fatigue Characteristics of Pt-29Nb-13Ta-4.6Zr Alloy for Biomedical Applications," J. Jpn. Inst. Met., 67 (11) (2003), pp. 652-660.
80. M. Niinomi et al., "Fretting Fatigue Characteristics of Newly Developed β Type Titanium Alloy in Air and Simulated Body Environment," J. Iron and Steel Inst. Jpn., 88 (9) (2002), pp. 553-660.
81. T. Akahori et al., "Fatigue, Fretting Fatigue and Corrosion Characteristics of Biocompatible Beta Type Titanium Alloy Conducted with Various Thermo-Mechanical Treatments," Mater. Trans., 45 (5) (2004), pp. 1540-1548.
82. K. Nakazawa, "Fatigue and Fretting Fatigue of Austenite and Ferritic Stainless Steels in Pseudo-Body Fluid," J. Jpn. Inst. Met., 63 (12) (1999), pp. 1600-1608.
83. N. Maruyama et al., "Fatigue and Fretting Fatigue of Ni Free Co-Cr Alloy in a Pseudo-Body Fluid," J. Jpn. Biomaterials Inst., 17 (4) (1999), pp. 172-179.
84. T. Akahori et al., "Microstructure and Fatigue Characteristics of Newly Developed β Type Pt-29Nb-13Ta-4.6Zr Alloy for Biomedical Applications," J. Jpn. Inst. Met., 66 (7) (2002), pp. 715-722.
85. M. Niinomi et al., "Friction Wear of Surface Oxidized Newly Developed β Type Titanium Alloy for Biomedical Applications in Simulated Body Environment," J. Iron Steel Inst. Jpn., 88 (9) (2002), pp. 567-574.
86. T. Mano et al., "Formation of Diamond-like Carbon Based Double-Layer Film on Pt-6Al-4V Substrate by Ionization Deposition," Mater. Trans., 45 (5) (2004), pp. 1601-1606.
87. K. Nishio et al., "Surface Modification of Titanium Using Laser Beam," Mater. Trans., 45 (5) (2004), pp. 1613-1619.
88. M. Okazaki, "Standardization and Activation of Industry," Materia Japan, 43 (3) (2004), pp. 182-185.