Artificial neural network based prediction of flank wear in turning

International Journal of Materials and Product Technology

Volumn 22, Issue 4, 2005, Pages 328-338

  Bisht, H ^a   Gupta, J ^a   Pal, S K ^b   Chakraborty, P ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY GUWAHATI   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY   (India)

Author keywords

Artificial neural network; Flank wear; Turning

Indexed keywords

BACKPROPAGATION; CONDITION MONITORING; CUTTING TOOLS; NEURAL NETWORKS; STEEL; SURFACE ROUGHNESS; TURNING; VIBRATIONS (MECHANICAL);

BACK PROPAGATION NEURAL NETWORKS; FEED-RATE; FLANK WEAR; HIGH SPEED STEEL (HSS);

WEAR OF MATERIALS;

EID: 17044410568     PISSN: 02681900     EISSN: None     Source Type: Journal    
DOI: 10.1504/IJMPT.2005.006462     Document Type: Article

References (28)

1. Monostori, L. (1993) 'A step towards intelligent manufacturing: modelling and monitoring of manufacturing processes through artificial neural network', Annals of CIRP, Vol. 42, No. 1, pp.485-493.
2. Lim, G.H. (1995) 'Tool wear monitoring in machine turning', J. Materials Processing Technology, Vol. 51, pp.25-36.
3. Das, S., Roy, R. and Chottopadhyay, A.B. (1996) 'Evaluation of wear of turning carbide inserts using neural network', Int. J. Machine Tools Manufacture, Vol. 36, pp.789-797.
4. Saini, D.P. and Park, Y.J. (1996) 'A quantitative model of acoustic emissions in orthogonal cutting operations', J. Materials Processing Technology, Vol. 58, pp.343-350.
5. Dimla, D.E., Lister, J.P.M. and Leighton, N.N.J. (1997) 'Neural network solutions to the tool condition monitoring problem in metal cutting - a critical review of methods', Int. J. Machine Tools and Manufacture, Vol. 37, No. 9, pp.1219-1241.
6. Jemielniak, K. and Otman, O. (1998) 'Tool failure detection based on analysis of acoustic emission signals', J. Materials Processing Technology, Vol. 76, pp.192-197.
7. Choudhury, S.K., Jain, V.K. and Rama-Rao, C.H.V.V. (1999) 'Online monitoring of tool wear in turning using neural network', Int. J. Machine Tools and Manufacture, Vol. 39, pp.489-504.
8. Choi, D., Kwon, W.T. and Chu, C.N. (1999) 'Real time monitoring of tool fracture in turning using sensor fusion', Int. J. Advanced Manufacturing Technology, Vol. 15, pp.305-310.
9. Li, X., Dong, S. and Venuvinod, P.K. (2000), 'Hybrid learning of tool wear monitoring', Int. J. Advanced Manufacturing Technology, Vol. 16, pp.303-307.
10. Govekar, E., Gradisek, J. and Grabec, I. (2000) 'Analysis of acoustic emission signals and monitoring of machining processes', Ultrasonics, Vol. 38, pp.598-603.
11. Dimla Sr., D.E. (2000) 'Sensor signals for tool wear monitoring in metal cutting operations - a review of methods', Int. J. Machine Tools and Manufacture, Vol. 40, pp.1073-1098.
12. Dimla Sr., D.E. and Lister, P.M. (2000) 'Online metal cutting tool condition monitoring I: force and vibration analyses', Int. J. Machine Tools and Manufacture, Vol. 40, pp.739-768.
13. Li, X. (2002) 'A brief review : acoustic emission method for tool wear monitoring during turning', Int. J. Machine Tools and Manufacture, Vol. 42, pp.157-165.
14. Chien, W.T. and Tsai, C.S., (2003) 'The investigation on prediction of tool wear and the determination of optimum cutting conditions in machining 17-4 PH stainless steel', J. Materials Processing Technology, Vol. 140, pp.340-345.
15. Rangwala, S.S. and Dornfield, D.A. (1989) 'Learning and optimisation of machining operations using computing abilities of neural networks', IEEE Trans. Systems Man and Cybernetics, Vol. 19, No. 2, 299-214.
16. Azouzi, A. and Guillot, M. (1990) 'Online optimisation of turning process using an inverse process neuro controller', Trans. ASME, J. Manufacturing Science and Engg., Vol. 120, pp.101-108.
17. Fang, X.D. and Jawahir, I.S. (1994) 'Predicting total machining performance in finish turning using integrated fuzzy-set models of the machinability parameters', Int. J. Production Research, Vol. 32, No. 4, pp.833-849.
18. Grezsik, W. (1996) 'A revised model for predicting surface roughness in turning', Wear, Vol. 194, pp.143-148.
19. Thomas, M., Beauchamp, Y., Youssef, A.Y. and Masounave, J. (1996) 'Effect of tool vibrations on surface roughness during lathe dry turning process', Computers Ind. Engng., Vol. 31, Nos. 3-4, pp.637-644.
20. Abouelatta, O.B. and Madl, J. (2001) 'Surface roughness prediction based on cutting parameters and tool vibrations in turning operations', J. Materials Processing Technology, Vol. 118, pp.269-277.
21. Lee, B.Y. and Tarng, Y.S. (2001) 'Surface roughness inspection by computer vision in turning operations', Int. J. Machine Tools and Manufacture, Vol. 41, pp.1251-1263.
22. Lin, W.S., Lee, B.Y. and Wu, C.L. (2001) 'Modeling the surface roughness and cutting force for turning', J. Materials Processing Technology, Vol. 108, pp.286-293.
23. Ho, S.Y., Lee, K.C., Chen, S.S. and Ho, S.J. (2002) 'Accurate modeling and prediction of surface roughness by computer vision in turning operations using an adaptive neuro-fuzzy inference system', Int. J. Machine Tools and Manufacture, Vol. 42, pp.1441-1446.
24. Grezsik, W. and Brol, S. (2003) 'Hybrid approach to surface roughness evaluation in multistage machining processes', J. Materials Processing Technology, Vol. 134, pp.265-272.
25. Puertas-Arbizu, I. and Luis-Pérez, C.J. (2003) 'Surface roughness prediction by factorial design of experiments in turning processes', J. Materials Processing Technology, Vol. 143-144, pp.390-396.
26. Risbood, K.A., Dixit, U.S. and Sahasrabudhe, A.D. (2003) 'Prediction of surface roughness and dimensional deviation by measuring cutting forces and vibrations in turning process', J. Materials Processing Technology, Vol. 132, pp.203-214.
27. Lee, S.S. and Chen, J.C. (2003) 'Online surface roughness recognition system using artificial neural network system in turning operations', Int. J. Advanced Manufacturing Technology, Vol. 22, pp.498-509.
28. Kohli, A. and Dixit, U.S. (2004) 'A neural-network-based methodology for the prediction of surface roughness in a turning process', Int. J. Advanced Manufacturing Technology, Vol. 25, pp. 118-129.