The generalized method of cells and high-fidelity generalized method of cells micromechanical models - A review

Mechanics of Advanced Materials and Structures

Volumn 11, Issue 4-5, 2004, Pages 329-366

  Aboudi, Jacob ^a  

^a TEL AVIV UNIVERSITY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE MATERIALS; DEFORMATION; THERMOELASTICITY; VISCOELASTICITY;

MICROMECHANICAL THEORIES; MULTIPHASE MATERIALS;

COMPOSITE MICROMECHANICS;

EID: 16344370344     PISSN: 15376494     EISSN: 15376532     Source Type: Journal    
DOI: 10.1080/15376490490451543     Document Type: Review

References (128)

1. J. Aboudi, Mechanics of Composite Materials: A Unified Micromechanical Approach, Elsevier, Amsterdam, 1991.
2. S. Nemat-Nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, North-Holland, Amsterdam, 1999.
3. J. Aboudi, Micromechanical Analysis of Composites by the Method of Cells - Update, Appl. Mech. Rev., vol. 49, pp. S83-S91, 1996.
4. B. A. Bednarcyk and S. M. Arnold, MAC/GMC 4.0 User's Manual, NASA/TM-2002-212077, 2002.
5. J. Aboudi, Generalized Effective Stiffness Theory for the Modeling of Fiber-Reinforced Composites, Int. J. Solid Struct., vol. 17, pp. 1005-1018, 1981.
6. J. Aboudi, A Continuum Theory for Fiber-Reinforced Elastic Viscoplastic Composites, Int. J. Eng. Sci., vol. 20, pp. 605-621, 1982.
7. M. Paley and J. Aboudi, Micromechanical Analysis of Composites by the Generalized Cells Model, Mech. Mater., vol. 14, pp. 127-139, 1992.
8. J. Aboudi, Micromechanical Analysis of Thermoinelastic Multiphase Short-Fiber Composites, Compos. Eng., vol. 5, pp. 839-850, 1995.
9. C. T. Herakovich, Mechanics of Fibrous Composites, Wiley, New York, 1998.
10. V. M. Levin, On the Coefficients of Thermal Expansion of Heterogeneous Materials, Mech. Solid, vol 2, pp. 58-61, 1967.
11. G. J. Dvorak, Transformation Field Analysis of Inelastic Composite Materials, Proc. R. Soc. Lond. A, vol. 437, pp. 311-327, 1992.
12. M.-J. Pindera and B. A. Bednarcyk, An Efficient Implementation of the Generalized Method of Cells for Unidirectional, Multi-Phased Composites with Complex Microstructures, Compos. Part B - Eng., vol. 30, pp. 87-105, 1999.
13. T. O. Williams and J. Aboudi, A Fully Coupled Thermomechanical Micromechanics Model, J. Them. Stresses, vol. 22, pp. 841-873, 1999.
14. D. H. Allen, Thetmo-Mechanical Coupling in Inelastic Solids, Appl. Mech. Rev., vol. 44, pp. 361-373, 1991.
15. J. G. Bennett and K. S. Haberman, An Alternate Unified Approach to the Micromechanical Analysis of Composite Materials, J. Compos. Mater., vol. 30, pp. 1732-1747, 1996.
16. B. A. Bednarcyk and M.-J. Pindera, Inelastic Thermal Response of Gr/Cu with Nonuniform Fiber Distribution, J. Aerospace Eng., vol. 9, pp. 93-105, 1996.
17. A. D. Freed, K. P. Walker, and M. J. Verrilli, Extending the Theory of Creep to Viscoplasticity, J. Press. Vess., vol. 116, pp. 67-75, 1996.
18. T. O. Williams and M.-J. Pindera, An Analytical Model for the Inelastic Axial Shear Response of Unidirectional Metal Matrix Composites, Int. J. Plasticity, vol. 13, pp. 261-289, 1997.
19. S. C. Baxter and M.-J. Pindera, Stress and Plastic Strain Fields During Unconstrained and Constrained Fabrication Cool Down of Fiber-Reinforced IMCs, J. Compos. Mater., vol. 33, pp. 351-376, 1999.
20. A. M. Roerden and C. T. Herakovich, The Inelastic Response of Porous, Hybrid-Fiber Composites, Compos. Sci. Technol., vol. 60, pp. 2443-2454, 2000.
21. P. C. Upadhyay and J. S. Lyons, Elastic Constants of Uniaxially Fiber Reinforced Multiphase Composites Using Recursive Cell Model, J. Reinf. Plast. Compos., vol. 19. pp. 569-603, 2000.
22. H. Mahiou and A. Béakou, Modelling of Interfacial Effects on the Mechanical Properties of Fibre-Reinforced Composites, Compos. Part A - Appl. Sci., vol. 29, pp. 1035-1048, 1998.
23. C. J. Lissenden, Fiber-Matrix Interfacial Constitutive Relations for Metal Matrix Composites, Compos. Part B - Eng., vol. 30, pp. 267-278, 1999.
24. A. Needleman, A Continuum Model for Void Nucleation by Inclusion Debonding. J. Appl. Mech., vol. 54, pp. 525-531, 1987.
25. C. J. Lissenden and S. M. Arnold, Theoretical and Experimental Considerations in Representing Macroscale Flow/Damage Surfaces for Metal Matrix Composites, Int. J. Plasticity, vol. 13, pp. 327-358, 1997.
26. C. J. Lissenden and S. M. Arnold, Effect of Microstructural Architecture on Flow/Damage Surfaces for Metal Matrix Composites, in G. Z. Voyiadjis, J. L. Chaboche, and J. W. Ju (eds.), Damage Mechanics in Engineering Materials, pp. 385-400, Elsevier, Amsterdam 1998.
27. S. K. Iyer, C. J. Lissenden, and S. M. Arnold, Local and Overall Flow in Composites Predicted by Micromechanics, Compos. Part B - Eng., vol. 31, pp. 327-343, 2000.
28. C. J. Lissenden, S. M. Arnold, and S. K. Iyer, Flow/Damage Surfaces for Fiber-Reinforced Metals Having Different Periodic Microstructures, Int. J. Plasticity, vol. 16, pp. 1049-1074, 2000.
29. S. M. Arnold, A. F. Saleeb, and M. G. Castelli, A Fully Associative, Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Based Matrices, Life Prediction Methodology for Titanium Matrix Compsites, pp. 231-256, ASTM-STP 1253, Philadelphia 1996.
30. R. K. Goldberg and S. M. Arnold, A Study of Influencing Factors on the Tensile Response of a Titanium Matrix Composite with Weak Interfacial Bonding, NASA/TM-2000-209798, 2000.
31. M. M. Aghdam, D. J. Smith, and M. J. Pavier, Finite Element Micromechanical Modelling of Yield and Collapse Behaviour of Metal Matrix Composites, J. Mech. Phys. Solid, vol. 48, pp. 499-528, 2000.
32. N. K. Naik and V. K. Ganesh, Failure Behavior of Plain Weave Fabric Laminates Under Inplane Shear Loading, J. Compos. Tech. Res., vol. 16, pp. 3-20, 1994.
33. N. K. Naik and V. K. Ganesh, Failure Behavior of Plain Weave Fabric Laminates Under On-Axis Uniaxial Tensile Loading. 2. Analytical Predictions, J. Compos. Mater., vol. 30, pp. 1779-1822, 1996.
34. H. Mahiou and A. Béakou, Local Stress Concentration and the Prediction of Tensile Failure in Unidirectional Composites, Compos. Sci. Technol., vol. 57, pp. 1661-1672, 1997.
35. D. D. Robertson and S. Mall, Incorporating Fiber Damage in a Micromechanical Analysis of Metal Matrix Composite Laminates, J. Compos. Tech. Res., vol. 18, pp. 265-273, 1996.
36. W. A. Curtin, Theory of Mechanical Properties of Ceramic-Matrix Composites, J. Am. Ceram. Soc., vol. 74, pp. 2837-2845, 1991.
37. B. A. Bednarcyk and S. M. Arnold, Micromechanics-Based Deformation and Failure Prediction for Longitudinally Reinforced Titanium Composites, Compos. Sci. Technol., vol. 61, pp. 705-729, 2001.
38. W. A. Curtin, Ultimate Strengths of Fiber-Reinforced Ceramics and Metals, Composites, vol. 24, pp. 98-102, 1993.
39. B. A. Bednarcyk and S. M. Arnold, Transverse Tensile and Creep Modeling of Continuously Reinforced Titanium Composites with Local Debonding, Int. J. Solid Struct., vol. 39, pp. 1987-2017, 2002.
40. M. A. Foringer, D. D. Robertson, and S. Mail, A Micromecanistic-Based Approach to Fatigue Life Modeling of Titanium-Matrix Composites, Compos. Part B - Eng., vol. 28, pp. 507-521, 1997.
41. S. R. Bodner, Unified Plasticity for Engineering Applications, Kluwer, New York, 2002.
42. W. J. Fleming and A. L. Dowson, Prediction of the Fatigue Life of an Aluminium Metal Matrix Composite Using the Theory of Cells, Sci. Eng. Compos., vol. 8, pp. 181-189, 1999.
43. T. E. Wilt, S. M. Arnold, and A. F. Saleeb, A Coupled/Uncoupled Computational Scheme for Deformation and Fatigue Damage Analysis of Unidirectional Metal-Matrix Composites, pp. 65-82, ASTM STP 1315, Philadelphia 1997.
44. S. M. Arnold and S. Kruch, Differential Continuum Damage Mechanics Models for Creep and Fatigue of Unidirectional Metal Matrix Composites, Int. J. Damage Mech., vol. 3, pp. 170-191, 1994.
45. B. A. Bednarcyk and S. M. Arnold, Fully Coupled Micro/Macro Deformation, Damage, and Failure Prediction for SiC/Ti-15-3 Laminates, J. Aerospace Eng., vol. 15, pp. 74-83, 2002.
46. G. Z. Voyiadjis and Z. Deliktas, Damage in MMCs Using the GMC: Theoretical Formulation, Compos. Part B - Eng., vol. 28, pp. 597-611, 1997.
47. G. Z. Voyiadjis and Z. Guelzim, A Coupled Incremental Damage and Plasticity Theory for Metal Matrix Composites, J. Mech. Beh. Mater., vol. 6, pp. 193-219, 1996.
48. G. Z. Voyiadjis and P. I. Kattan, Advances in Damage Mechanics: Metal and Metal Matrix Composites, Elsevier, Amsterdam, 1999.
49. A. P. Raynolds and S. C. Baxter, Kinematic Hardening in a Dispersion Strengthened Aluminum Alloy: Experiment and Modeling, Mater. Sci. Tech., vol. A285, pp. 265-279, 2000.
50. C. T. Herakovich and S. C. Baxter, Influence of Pore Geometry on the Effective Response of Porous Media, J. Mater. Sci., vol. 34, pp. 1595-1609, 1999.
51. D. H. Pahr and S. M. Arnold, The Applicability of the Generalized Method of Cells for Analyzing Discontinuously Reinforced Composites, Compos. Part B - Eng., vol. 33, pp. 153-170, 2002.
52. B. A. Bednarcyk and M.-J. Pindera, Inelastic Response of a Woven Carbon/Copper Composite Part I: Experimental Characterization, J. Compos. Mater., vol. 33, pp. 1807-1836, 1999.
53. B. A. Bednarcyk and M.-J. Pindera, Inelastic Response of a Woven Carbon/Copper Composite Part II: Micromechanics Model, J. Compos. Mater., vol. 34, pp. 299-331, 2000.
54. B. A. Bednarcyk and M.-J. Pindera, Inelastic Response of a Woven Carbon/Copper Composite Part III: Model-Experiment Correlation, J. Compos. Mater., vol. 34, pp. 352-378, 2000.
55. B. A. Bednarcyk, Modeling Woven Polymer Matrix Composites with MAC/GMC, NASA/CR-2000-210370, 2000.
56. See also: B. A. Bednarcyk and S. M. Arnold, Micromechanics-Based Modeling Woven Polymer Matrix Composites, AIAA J., vol. 41, pp. 1788-1796, 2003.
57. B. A. Bednarcyk, Discussion of "Woven Fabric Composite Material Model with Material Non-Linearity for Non-Linear Finite Element Simulation" by Tabiei and Jiang, Int. J. Solid Struct., vol. 38, pp. 8585-8588, 2001.
58. R. S. Salzar, Influence of Autofrettage on Metal Matrix Composite Reinforced Armaments, Compos. Part B - Eng., vol. 30, pp. 841-847, 1999.
59. R. S. Salzar, Design Considerations for Rotating Laminated Metal Matrix Composite Shafts, Compos. Sci. Technol., vol. 59, pp. 883-897, 1999.
60. S. C. Baxter and L. L. Graham, Characterization of Random Composites Using Moving-Window Technique, J. Eng. Mech., vol. 126, pp. 389-397, 2000.
61. S. C. Baxter, M. I. Hossain, and L. L. Graham, Micromechanics Based Random Material Property Fields for Particulate Reinforced Composites, Int. J. Solid Struct., vol. 38, pp. 9209-9220, 2001.
62. L. L. Graham and S. C. Baxter, Simulation of Local Material Properties Based on Moving-Window GMC, Probabilist. Eng. Mech., vol. 16, pp. 295-305, Charlottesville 2001.
63. E. Siragy, Characterization of Local Response of Heterogeneous Materials Using Moving-Window GMC and Finite Element Analysis, Ph. D. dissertation, University of Virginia, 2002.
64. See also: L. L. Graham-Brady, E. F. Siragy, and S. C. Baxter, Analysis of Heterogeneous Composites Based on Moving-Window Techniques, J. Eng. Mech., vol. 129, pp. 1054-1064, 2003.
65. C. E. Orozco, Computational Aspects of Modeling Complex Microstructure Composites Using GMC, Compos. Part B - Eng., vol. 28, pp. 167-175, 1997.
66. C. E. Orozco and M.-J. Pindera, Plastic Analysic of Complex Microstructure Composites Using the Generalized Method of Cells, AIAA J., vol. 37, pp. 482-488, 1999.
67. C. E. Orozco and M.-J. Pindera, Viscoelastic Analysis of Multi-Phase Composites Using the Generalized Method of Cells, AIAA J., vol. 40, pp. 1619-1626, 2002.
68. S. Kumar and R. N. Singh, The Creep Response of Uni-Directional Fiber-Reinforced Ceramic Composites: A Theoretical Study, Compos. Sci. Technol., vol. 61, pp. 461-473, 2001.
69. A. K. Noor, J. H. Starnes, and J. M. Peters, Nonlinear and Postbuckling Responses of Curved Composite Panels with Cutouts, Compos. Struct., vol. 34, pp. 213-240, 1996.
70. A. K. Noor and J. M. Peters, Nonlinear and Postbuckling Analyses of Curved Composite Panels Subjected to Combined Temperature Change and Edge Shear, Comput. Struct., vol. 60, pp. 853-874, 1996.
71. A. K. Noor and Y. H. Kim, Buckling and Postbuckling of Composite Panels with Cutouts Subjected to Combined Edge Shear and Temperature Change, Comput. Struct., vol. 60, pp. 203-222, 1996.
72. A. K. Noor and Y. H. Kim, Buckling and Postbuckling of Composite Panels with Cutouts Subjected to Combined Loads, Finite Elem. Anal. Des., vol. 22, pp. 163-185, 1996.
73. A. K. Noor, Recent Advances in Sensitivity Analysis for Thermomechanical Postbuckling of Composite Panels, J. Eng. Mech., vol. 122, pp. 300-307, 1996.
74. S. C. Baxter and M.-J. Pindera, Degradation of Elastic Response of MMC Laminated Tubes due to Internal Fiber Cracks, J. Aerospace Eng., vol. 10, pp. 43-48, 1997.
75. E. Feldman and I. Belostotsky, On the Response of MMC Laminated Plates to Non-Uniform Temperature Loading: The Effect of Temperature-Dependent Material Properties, Compos. Struct., vol. 38, pp. 83-89, 1997.
76. E. Feldman and R. Gilat, On the Dynamic Response of Metal Matrix Composite Panels to Uniform Temperature Loading, Compos. Struct., vol. 47, pp. 619-624, 1999.
77. R. Gilat and J. Aboudi, Parametric Stability of Non-Linearly Elastic Composite Plates by Lyapunov Exponents, J. Sound Vib., vol. 235, pp. 727-637, 2000.
78. R. Gilat, T. O. Williams, and J. Aboudi, Buckling of Composite Plates by Global-Local Theory, Compos. Part B - Eng., vol. 32, pp. 229-236, 2001.
79. R. Gilat and J. Aboudi, The Lyapunov Exponents as a Quantitative Criterion for the Dynamic Buckling of Composite Plates, Int. J. Solid Struct., vol. 39, pp. 467-481, 2002.
80. R. Gilat and J. Aboudi, Buckling Analysis of Composite Plates, in D. Durban, D. Givoli, and J. G. Simmonds (eds.), Advances in the Mechanics of Plates and Shells, pp. 135-150, Kluwer, Dordrecht 2001.
81. M.-J. Pindera, J. Aboudi, and S. M. Arnold, Thermomechanical Analysis of Functionally Graded Thermal Barrier Coatings with Different Microstructural Scales, J. Am. Ceram. Soc., vol. 81, pp. 1525-1536, 1998.
82. M.-J. Pindera, J. Aboudi, and S. M. Arnold, The Effect of Interface Roughness and Oxide Film Thickness on the Inelastic Response of Thermal Barrier Coatings to Thermal Cycling, J. Mater. Sci. Eng. A, vol. 284, pp. 158-175, 2000.
83. M.-J. Pindera, J. Aboudi, and S. M. Arnold, Analysis of Spallation Mechanism in Thermal Barrier Coatings with Graded Bond Coats Using the Higher-Order Theory for FGM's, Eng. Fract. Mech., vol. 69, pp. 1587-1606, 2002.
84. L. Banks-Sills, R. Eliasi, and Y. Berlin, Modeling of Functionally Graded Materials in Dynamic Analyses, Compos. Part B - Eng., vol. 33, pp. 7-15, 2002.
85. M. B. Fuchs, M. Paley, and E. Miroshny, The Aboudi Micromechanical Model for Topology Design of Structures, Comput. Struct., vol. 73, pp. 355-362, 1999.
86. C. S. Collier, HITEMP Material and Structural Optimization Technology Transfer, NASA CR-2001-211166, 2001.
87. M. Assaad and S. M. Arnold, An Analysis of the Macroscopic Tensile Behavior of a Nonlinear Nylon Reinforced Elastomeric Composite System Using MAC/GMC, NASA/TM-1999-209066, 1999.
88. J. Aboudi, Micromechanical Prediction of the Effective Behavior of Fully Coupled Electro-Magneto-Thermo-Elastic Multiphase Composites, NASA/CR-2000-209787, 2000.
89. J. Aboudi, Micromechanical Prediction of the Effective Coefficients of Thermo-Piezoelectric Multiphase Composites, J. Intel. Mater. Syst. Struct., vol. 9, pp. 713-722, 1998.
90. J. Aboudi, Micromechanical Prediction of the Response of Electrostrictive Multiphase Composites, Smart Mater. Struct., vol. 8, pp. 663-671, 1999.
91. A. Goldstein, The Prediction of the Behavior of Composite Materials with Embedded SMA Fibers, M. Sc. thesis, Tel Aviv University, Tel Aviv, Israel, 2000.
92. B. A. Bednarcyk, An Inelastic Micro/Macro Theory for Hybrid Smart/Metal Composites, Compos. Part B - Eng., vol. 34, pp. 175-197, 2003.
93. C. L. Horn and N. Shankar, A Fully Coupled Constitutive Model for Electrostrictive Ceramic Materials, J. Intel. Mater. Syst. Struct., vol. 5, pp. 795-801, 1994.
94. E. J. Graesser and F. A. Cozzarelli, A Proposed Three-Dimensional Constitutive Model for Shape Memory Alloys, J. Intel. Mater. Syst. Struct., vol. 5, pp. 78-89, 1994.
95. P. R. Witting and F. A. Cozzarelli, Experimental Determination of Shape Memory Alloy Constitutive Model Parameters, Active Materials and Smart Structures, SPIE - Int. Soc. Opt. Eng., vol. 2477, pp. 260-275, 1995.
96. M. E. Lauermann, Temperature Dependence of Shape Memory Material Parameters in Constitutive Law for Nitinol, M. Sc. thesis, State University of New York at Buffalo, New York, 1994.
97. J. G. Boyd and D. C. Lagoudas, Thermomechanical Response of Shape Memory Composites, J. Intel. Mater. Syst. Struct., vol. 5, pp. 333-346, 1994.
98. D. C. Lagoudas, Z. Bo, and M. A. Qidwai, A Unified Thermodynamic Constitutive Model for SMA and Finite Element Analysis of Active Metal Matrix Composites, Mech. Compos. Mater. Struct., vol. 3, pp. 153-179, 1996.
99. R. Gilat and J. Aboudi, Dynamic Response of Active Composite Plates: Shape Memory Alloy Fibers in Polymeric/Metallic Matrices, Int. J. Solid Structure, 2004.
100. M. Kawai, H. Ogawa, V. Baburaj, and T. Koga, Micromechanical Analysis for Hysteretic Behavior of Unidirectional TiNi SMA Fiber Composites, J. Intel. Mater. Syst. Struct., vol. 10, pp. 14-28, 1999.
101. J. Aboudi and S. M. Arnold, Micromechanical Modeling of the Finite Deformation of Thermoelastic Multiphase Composites, Math. Mech. Solid, vol. 5, pp. 75-99, 2000.
102. J. Aboudi, Micromechanical Prediction of the Finite Thermoelastic Response of Rubberlike Matrix Composites, J. Appl. Math. Phys. (ZAMP), vol. 52, pp. 823-846, 2001.
103. J. Aboudi, Micromechanical Modeling of Finite Viscoelastic Multiphase Composites, J. Appl. Math. Phys. (ZAMP), vol. 51, pp. 114-134, 2000.
104. J. Aboudi, Overall Finite Deformation of Elastic and Elastoplastic Composites, Mech. Mater., vol. 5, pp. 73-86, 1986.
105. P. J. Blatz and W. L. Ko, Application of Finite Elastic Theory to the Deformation of Rubbery Materials, Trans. Soc. Rheol., vol. 6, pp. 223-251, 1962.
106. C. O. Horgan, On Axisymmetric Solutions for Compressible Nonlinearly Elastic Solids, J. Appl. Math. Phys. (ZAMP), vol. 46, pp. S107-S125, 1995.
107. P. Chadwick, Thermo-Mechanics of Rubberlike Materials, Philos. Trans. R. Soc. A., vol. A276, pp. 372-403, 1974.
108. P. Chadwick and C. F. M. Creasy, Modified Entropie Elasticity of Rubberlike Material, J. Mech. Phys. Solid, vol. 32, pp. 337-357, 1984.
109. K. N. Morman, A. Thermomechanical Model for Amorphous Polymers in the Glassy, Transition, and Rubber Regions, AMD vol. 203, Current Research in the Thermo-Mechanics of Polymers in the Rubbery-Glassy Range, ASME, New York 1995.
110. J. C. Simo, On a Fully Three-Dimensional Finite-Strain Viscoelastic Damage Model: Reforulation and Computational Aspects, Comput. Method Appl. Mech., vol. 60, pp. 153-173, 1987.
111. T. O. Williams and J. Aboudi, A Generalized Micromechanics Model with Shear-Coupling, Acta Mech., vol. 138, pp. 131-154, 1999.
112. H. Gan, C. E. Orozco, and C. T. Herakovich, A Strain-Compatible Method for Micromechanical Analysis of Multi-Phase Composites, Int. J. Solid Struct., vol. 37, pp. 5097-5122, 2000.
113. C. E. Orozco and H. Gan, Viscoplastic Response of Multiphase Composites Using a Strain-Compatible Volume-Averaging Method, Compos. Part B - Eng., vol. 33, pp. 301-313, 2002.
114. T. O. Williams, A Two-Dimensional, Higher-Order, Elasticity-Based Micromechanics Model, Compos. Sci. Technol., to appear.
115. T. O. Williams, A. Three-Dimensional, Higher-Order, Elasticity-Based Micromechanics Model, Compos. Sci. Technol., to appear.
116. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Higher-Order Theory for Functionally Graded Materials, Compos. Part B - Eng., 30, pp. 777-832, 1999.
117. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Linear Thermoelastic Higher-Order Theory for Periodic Multiphase Materials, J. Appl. Mech., vol. 68, pp. 697-707, 2001.
118. J. Aboudi, M.-J. Pindera, and S. M. Arnold, Higher-Order Theory for Periodic Multiphase Materials with Inelastic Phases, Int. J. Plasticity, vol. 19, pp. 805-847, 2003.
119. J. Aboudi, M.-J. Pindera, and S. M. Arnold, High-Fidelity Generalized Method of Cells for Inelastic Periodic Multiphase Materials, NASA TM-2002-211469, 2002.
120. R. Hill, Elastic Properties of Reinforced Solids: Some Theoretical Principles, J. Mech. Phys. Solid, vol. 11, pp. 357-372, 1963.
121. B. A. Bednarcyk, S. M. Arnold, J. Aboudi, and M.-J. Pindera, Local Field Effects in Titanium Matrix Composites Subjected to Fiber-Matrix Debondig, Int. J. Plasticity, 2004.
122. J. Aboudi, Micromechanical Analysis of Fully Coupled Electro-Magneto- Thermo-Elastic Multiphase Composites, Smart Mater. Struct., vol. 10, pp. 867-877, 2001.
123. J. Y. Li and M. L. Dunn, Micromechanics of Magnetoelectroelastic Composite Materials: Average Field and Effective Behavior, J. Intel. Mater. Syst. Struct., vol. 9, pp. 404-416, 1998.
124. T. Mori and K. Tanaka, Average Stresses in Matrix and Average Energy of Materials with Misfitting Inclusions, Acta Metall., vol. 21, pp. 571-574, 1973.
125. J. Aboudi, Micromechanical Analysis of the Fully Coupled Finite Thermoelastic Response of Rubberlike Matrix Composites, Int. J. Solid Struct., vol. 39, pp. 2587-2612, 2002.
126. J. Aboudi and M.-J. Pindera, High-Fidelity Micromechanical Modeling of Continuously Reinforced Elastic Multiphase Materials Undergoing Finite Deformation, Math. Mech. Solid, 2004.
127. J. Aboudi, Micromechanical Analysis of the Finite Elastic-Viscoplastic Response of Multiphase Composites, Int. J. Solid Struct., vol. 40, pp. 2793-2817, 2003.
128. M. B. Rubin, An Elastic-Viscoplastic Model Exhibiting Continuity of Solid and Liquid States, Int. J. Eng. Sci., vol. 25, pp. 1175-1191, 1987.