Micromechanical analysis of composites by the method of cells - Update

Applied Mechanics Reviews

Volumn 49, Issue 10, 1996, Pages S83-S91

  Aboudi, Jacob ^a  

^a TEL AVIV UNIVERSITY   (Israel)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITE STRUCTURES; ELASTICITY; MATHEMATICAL MODELS; STIFFNESS; STRESS ANALYSIS; STRUCTURAL ANALYSIS;

GENERALIZED METHOD OF CELLS; METHOD OF CELLS;

COMPOSITE MICROMECHANICS;

EID: 0030258281     PISSN: 00036900     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.3101981     Document Type: Article

References (101)

1. Aboudi J (1989), Micromechanical analysis of composites by the method of cells, Appl Mech Rev 42, 193-221.
2. Aboudi J (1991), Mechanics of Composite Materials: A Unified Micromechanical Approach, Elsevier, Amsterdam.
3. Aboudi J (1993), Constitutive behavior of multiphase metal matrix composites with interfacial damage by the generalized cell model, in Damage in Composite Materials, Voyiadjias GZ (ed), Elsevier, Amsterdam, 3-22.
4. Aboudi J (1994), Interfacial Damage, in Damage Mechanics of Composite Materials, Talreja R (ed), Elsevier, Amsterdam, 245-294.
5. Aboudi J (1995), Micromechanical analysis of thermo-inelastic multiphase short-fiber composite, Composites Eng 5, 839-850.
6. Aboudi J and Herakovich CT (1996), An interfacial damage model for titanium matrix composites, in Damage and Interfacial Debonding in Composites, Voyadjis GZ and Allen DH, (eds), Elsevier, Amsterdam, 149-165.
7. Aboudi J and Pindera M-J (1992), Micromechanics of Metal Matrix Composites Using the Generalized Method of Cells Model (GMC): User's Guide, NASA CR 190756.
8. Aidun JB and Addessio FL (1995), Cell Model for Homogenization of Fiber-Reinforced Composites: General Theory and Nonlinear Elasticity Effects, LA-12904-MS, LANL.
9. Aidun JB and Addessio FL (1996), Enhanced Cell Model with Nonlinear Elasticity, J Composite Mat 30, 248-280.
10. Arenburg RT and Reddy, JN (1991a), Analysis of metal matrix composite structures - I: Micromechanics constitutive theory, Comput Struct 40, 1369-1385.
11. Arenburg RT and Reddy JN (1991b), Analysis of metal matrix composite structures - II: Laminate analysis, Comput Struct 40, 1369-1385.
12. Arnold SM and Castelli MG (1994), Continuum-based theoretical and experimental studies in deformation and damage of MMCs at NASA-LEWIS: Progress and Trends, Composites Eng 4, 811-828.
13. Arnold SM, Pindera M-J, and Wilt TE (1995), Influence of fiber architecture on the elastic and inelastic response of metal matrix composites, NASA TM 106705 (to appear also in Int J Plasticity).
14. Arnold SM, Robinson DN, and Bartolotta PA (1992), Unified Viscoplastic Behavior of Metal Matrix Composites, NASA TM 105819.
15. Arnold SM and Saleeb AF (1994), Thermodynamic framework of generalized Coupled thermoelastic viscoplastic: Damage modeling, Int J Plasticity 10, 263-278.
16. Arnold SM, Saleeb AF, and Castelli MG (1994), Fully Associative Nonlinear Kinematic, Unified Viscoplastic Model for Titanium Based Matrices, NASA TM 106609; ASTM STP 1253, 231-256
17. Arnold SM, Saleeb AF, and Wilt TE (1995), Modeling investigation of thermal and strain induced recovery and nonlinear hardening in potential based viscoplasticity, JEng Mat and Tech 117, 157-167.
18. Arnold SM, Wilt TE, Saleeb AF, and Castelli MG (1993), Investigation of Macro and Micromechanical Approaches for a Model MMC System, NASA CP 19117, Vol II, pp (52. l)-(52.12).
19. Balasubramaniam K, Ji Y, and Gardner S (1995), Study of the influence of fiber-matrix interphase properties on ultrasonic wave behavior using effective elastic property models, Composites Eng 5, 675-695.
20. Bednarcyk BA and Pindera M-J (1994), Micromechanical Modeling of the Thermal Expansion of Graphite/Copper Composites with Nonuniform Microstructure, NASA CR 195368.
21. Benveniste Y, Dvorak GJ, and Chen T (1989), Stress fields in composites with coated inclusions, Mech Mat 7, 305-317.
22. Binienda WK., Robinson DN, Arnold SM, and Bartolotta PA (1990), Creep Model for Metallic Composites Based on Matrix Testing: Application to Kanthal Composites, NASA TM 103172.
23. Bodner SR and Partom Y (1975), Constitutive equations for elastic viscoplastic strain-hardening materials, J Appl Mech 42, 385-389.
24. Brayshaw JB (1994), Consistent Formulation of the Method of Cells for Transversely Isotropic Metal Matrix Composites PhD dissertation, Univ of Virginia.
25. Brayshaw JB and Pindera MJ (1990), Effect of Temperature and Time-Dependent Matrix Properties on Residual Thermal Stresses in MMC, PVP 203, AMD 110, ASME, 35-41.
26. Brayshaw JB and Pindera MJ (1994), Effect of matrix constitutive model on residual thermal stresses in MMC, J Eng Mat Tech 116, 505-511.
27. Cederbaum G (1990), Random vibrations of viscoelastic laminated plates, J Appl Mech 57,688-693.
28. Cederbaum G and Aboudi J (1989), Micro-to-Macro Analysis of Laminated Plates in Composite Structures, Vol 5, Marshall IH, (ed), Elsevier, London
29. Cederbaum G, Aboudi J, and Elishakoff I (1991), Dynamic instability of shear deformable viscoelastic laminated plates by Lyapunov exponents, Int J Solids Struct 18, 317-327.
30. Cederbaum G, Elishakoff I, Aboudi J, and Librescu L (1992), Random Vibration and Reliability of Composite Structures, Technomic, Lancester, PA.
31. Chandiramani NK and Librescu L (1989), Dynamic stability of unidirectional fiber-reinforced viscoelastic composite plates, Appl Mech Rev 42, S39-S47.
32. Chandiramani NK, Librescu L, and Aboudi J (1989), Theory of orthotropic viscoelastic shear deformable composite flat panels and their dynamic stability, Int J Solids Struct 25, 465-482.
33. Devries F (1993), Bounds on elastic moduli of unidirectional composites with imperfect bonding, Composites Eng 3, 349-382.
34. Duva JM, Aboudi J, and Herakovich CT (1994), Probabilistic Micromechanical Model for Damaged Composites AMD-Vol 185 Damage Mechanics in Composites, Allen DH and Ju JE, (eds), 1-20, ASME, to appear also in J Eng Mat Tech (1996).
35. Engelstad SP and Reddy JN (1993), Probabilistic nonlinear FE analysis of composite structures, AIAA 731, 362-369.
36. Feldman E (1995a), Response of metal matrix laminated cylindrical panels to combined uniform temperature change and edge displacements, Acta Mech.
37. Feldman E (1995b), Postbuckling analysis of laminated plates made of discontinuous metal matrix composites, Composite Struct 32, 89-96.
38. Feldman E and Aboudi J (1993), Postbuckling analysis and imperfection densitivity of metal matrix laminated cylindrical panels, Composite Struct 25, 241-248.
39. Feldman E and Aboudi J (1994), Postbuckling analysis of metal matrix laminated plates, Composites Eng A, 151-167.
40. Feldman E and Aboudi J (1995), Thermal postbuckling of metal matrix laminated plates, J Thermal Stresses 18, 197-218.
41. Ferrari M (1991), Asymmetry and high concentration limit of the Mori-Tanaka medium theory, Mech Mat 11, 251-256.
42. Gardner JP (1994), Micromechanical Modeling of Composite Materials in Finite Element Analysis Using an Embedded Cell Approach, MSc Thesis, MIT.
43. Gardner SD, Pittman CU, and Hackett RM (1993a), Polymeric composite materials incorporating an elastomeric interphase: A mathematical assessment, Composite Sci Tech 46, 307-318.
44. Gardner SD, Pittman CU, and Hackett RM (1993b), Residual thermal stresses in filamentary polymer-matrix composites containing an elastomeric interphase, J Composite Mat 27, 830-860.
45. Gardner SD, Pittman CU, Chang TC, Low BY, and Hackett RM (1995), Microstress distribution in graphite fiber/epoxy composites containing an elastomeric interphase: Response to uniaxial and biaxial loading conditions, Composites 26, 269-280.
46. Gilat R and Aboudi J (1994), Dynamic buckling of metal matrix composite plates and shells under cylindrical bending, Composite Struct 28, 459-469.
47. Gilat R and Aboudi J (1995a), Dynamic inelastic response and buckling of metal matrix composite infinitely wide plates due to thermal shocks, Mech Composite Mat Struct 2, 257-271.
48. Gilat R and Aboudi J (1995b), Dynamic buckling of nonlinear resin matrix composite structures, Composite Struct 31, 81-88.
49. Gilat R and Aboudi J (1996), Thermomechanical coupling effects on the dynamic inelastic response and buckling of metal matrix composite infinitely wide plates, Composite Struct (to appear).
50. Herakovich CT and Hidde JS (1992), Response of metal matrix composites with imperfect bonding, Ultramicroscopy 40, 215-228.
51. Jasiuk I and Kouider MW (1993), Effect of an inhomogeneous interphase on the elastic constants of transversely isotropic composites, Mech Mat 15, 53-63.
52. Jayaraman K and Reifsnider KL (1992), Residual stresses in a composite with continuously varying Young’s modulus in the fiber/matrix interphase, J Composite Mat 26, 770-791.
53. Jayaraman K and Reifsnider KL (1993), Interphase in unidirectional fiber-reinforced epoxies: Effect on residual thermal stresses, Composite SciTech 47, 119-129.
54. Kaliske M and Rothert H (1995), Damping characterization of unidirectional fiber reinforced polymer composites, Composites Eng 5, 551-567.
55. Kroupa JL, Neu RW, Nicholas T, Coker D, Robertson DD, and Mall S (1995), Comparison of analysis tools for predicting the inelastic cyclic response of cross-ply titanium matrix composites, ASTM Symp on Life Prediction Methodology for Titanium Matrix Composites, ASTM STP 1253, 297-327.
56. Librescu L and Chandiramani NK (1989), Recent results concerning the stability of viscoelastic, shear-deformable plates under compressive edge loading, Solid Mech Arch 14, 215-250.
57. Lissenden CJ and Herakovich CT (1992), Comparison of Micromechanical Models for Elastic Properties, in Space 92, Proc 3rd Int Conf Engineering, Construction, and Operations in Space III, Sadeh WZ and Miller RJ, Ed, Denver CO, pp 1309-1322.
58. Lissenden CJ, Herakovich CT, and Pindera M-J (1995), Response of SiC/Ti under combined loading -Part I: Theory and experiment for imperfect bonding, J Composite Mat 29, 130-155.
59. Lissenden CJ, Pindera M-J, and Herakovich CT (1992), Response of SiC/Ti Tubes under Biaxial Loading in the Presence of Damage, AMD-Vol. 150/AD-Vol 32, Damage Mechanics in Composites, Allen DH, and Lagoudas DC, Eds, ASME, New York, 73-90.
60. Lissenden CJ, Pindera M-J, and Herakovich CT (1994), Stiffness degradation of Sic/Ti tubes subjected to biaxial loading, Composite Sei Tech 50, 23-36.
61. Low BY, Anderson KL, Vincent M and Gardner SD (1995), Toughened carbon fiber/epoxy composites: The relative influence of an elastomer interphase and elastomer dispersed in the matrix, Composite Eng 5, 437-457.
62. Low BY, Gardner SD, Pittman, CU, and Hackett RM (1994), Micromechanical characterization of graphite fiber/epoxy composites containing a heterogeneous region, Composite Sei Tech 52, 589-606.
63. Low BY, Gardner SD, Pittman CU, and Hackett RM (1995), Micromechanical characterization of residual thermal stresses in carbon fiber/epoxy composites containing a non-uniform interphase region, Composites Eng 5, 375-396.
64. McGee JD and Herakovich CT (1992), Micromechanics of Fiber/Matrix Debonding, Am-92-01, Appl Mech Program, Univ of Virginia.
65. Mikata Y and Taya M (1985), Stress field in a coated continuous fiber composite subjected to thermomechanical loadings, J Composite Mat 19, 554-578.
66. Mori T and Tanaka K (1973), Average stresses in matrix and average energy of materials with misfitting inclusions, Acta Metall 21, 571-574.
67. Needleman A (1992), Micromechanical modeling of interfacial decohesion, Ultramicroscopy 40, 203-214.
68. Nimmer RP, Bankert ES, Smith GA and Wright PK (1991), Micromechanical modeling of fiber/matrix interface effects in transversely loaded SiC/Ti-6-4 metal matrix composites, J Composite Tech Res 13, 3-13.
69. Noor AK and Shah RS (1993), Effective thermoelastic and thermal properties of unidirectional fiber-reinforced composites and their sensitivity coefficients, Composite Struct 26, 7-23.
70. Pagano NJ and Tandon GP (1988), Elastic response of multi-directional coated-fiber composites, Composite Sei Tech 31, 273-293.
71. Pagano NJ and Tandon GP (1990), Thermoelastic model for multidirectional coated-fiber composites: Traction formulation, Composite Sci Tech 38, 247-269.
72. Paley M and Aboudi J (1991a), Overall instantaneous properties of metal matrix composites, Composite Sei Tech 41,411-429.
73. Paley M and Aboudi J (1991b), Plastic buckling of metal matrix laminated plates, Int J Solids Struct 28, 1139-1154.
74. Paley M and Aboudi J (1991c), Inelastic thermal buckling of metal matrix laminated plates, J Thermal Stresses 14, 479-497.
75. Paley M and Aboudi J (1992), Micromechanical analysis of composites by the generalized cell model, Mech Mat 14, 127-139.
76. Pindera M-J (1991), Local/global stiffness matrix formulation for composite materials and structures, Composites Eng 1, 69-83.
77. Pindera M-J and Freed AD (1994), Effect of matrix microstructure on thermally induced residual stresses in SiC/titanium aluminide composites, J Eng Mat Tech 116,215-221.
78. Pindera M-J, Williams TO, and Arnold SM (1994), Thermoplastic response of metal matrix composites with homogenized and functionally graded interfaces, Composites Eng, 4, 129-145.
79. Pleitner J and Kossira H (1993), Micromechanical Analysis of continuous fiber-reinforced ceramic matrix composites at elevated temperatures, Int Conf on High Temperature Ceramic Matrix Composites, EACM-6, pp 565-572, Bordeaux, France.
80. Ramaswamy VG, Stouffer DC, and Laflen JH (1990), Unified constitutive model for the inelastic uniaxial response of René 80 at temperatures between 538C and 982C, J Eng Mat Tech 112, 280-286.
81. Robertson D and Mall S (1993), Micromechanical relations for fiber-reinforced composites using the free transverse shear approach, J CompTech Res 15, 181-192.
82. Robertson DD and Mall S (1994a), Micromechanical analysis for thermoviscoplastic behavior of unidirectional fibrous composites, Composite Sei Tech 50, 483-496.
83. Robertson DD and Mall S (1994b), Micromechanical analysis of metal matrix composite laminates with fiber/matrix interfacial damage, Composites Eng 4, 1257-1274.
84. Robertson DD and Mall S (1994c), Nonlinear micromechanics-based analysis of metal matrix composite laminates, Composite Sei Tech 52, 319-331.
85. Robertson DD and Mall S (1995), Analysis of the thermo-mechanical fatigue response of metal matrix composite laminates with interfacial normal and shear failure, ASTM Symp on the Thermo-Mechanical Fatigue Behavior of Materials: 2nd Volume, ASTM STP 1263.
86. Salzar RS (1995), Functionally graded metal matrix composite tubes, Composites Eng 5, 891-900.
87. Salzar RS, Pindera M-J, and Barton FW (1994), Optimization of Layered Metal Matrix Composite Cylinders, AM-94-01, Appl Mech Program, Univ of Virginia.
88. Salzar RS, Pindera M-J, and Barton FW (1996a), Elastoplastic analysis of layered metal matrix composite cylinders - Part 1: Theory, J Pressure Vessel Tech 118,13-20.
89. Salzar RS, Pindera M-J, and Barton FW (1996b), Elastoplastic analysis of layered metal matrix composite cylinders - Part II: Numerical results, J Pressure Vessel Tech 118, 21-26.
90. Sankurathri A (1995), Effect of Fiber Architecture on the Response of MMCs with Internal Damage, MSc Thesis, Univ of Virginia.
91. Sankurathri A, Baxter S, and Pindera M-J (1996), Effect of fiber architecture on the inelastic response of metal matrix composites with interfacial and fiber damage, in Damage and Interfacial Debonding in Composites, Voyadjis GZ, and Allen DH, (eds), Elsevier, Amsterdam.
92. Shalev D and Aboudi J (1991), Postbuckling analysis of viscoelastic laminated plates using higher-order theory, Int J Solids Struct 27, 1747-1755.
93. Stouffer DC and Bodner SR (1979), Constitutive model for the deformation induced anisotropic plastic flaw of metals, Int J Eng Sci 17, 757-764.
94. Teply JL and Reddy JN (1990), Unified formulation of micromechanics models of fiber-reinforced composites, in Inelastic Deformation of Composite Materials, Dvorak GJ, Ed, Springer-Veriag, New York, 341-370.
95. Urquhart ED, Arnold SM Pindera M-J, Aikin BJM (1993), Simulation of Experimentally Observed Thermal Expansion Behavior of FeCrAlY Based Composites, NASA CP 19117, Vol II, pp (54.1)-(54.12).
96. Williams TO and Pindera M-J (1995a), TMF modeling of advanced metal matrix composites in the presence of microstructural details, Mat Sci Eng, A200, 156-172.
97. Williams TO and Pindera M-J (1995b), Inelastic microstructural modeling of metal matrix composites, Appl Mech Program AM-95-01, Univ of Virginia.
98. Wilt TE and Arnold SM (1994), Micromechanics Analysis Code ß(AC) User Guide: Version 1.0, NASA TM 106706; Version 2.0 NASA TM 107290 (1996).
99. Wilt TE (1995), Finite Element Implementation of the Generalized Method of Cells Micromechanics Constitutive Model, NASA CR 195451.
100. Yancey RN (1993), Micromechanical Constitutive Damage Model For Use With Computed Tomography Data, Final Report, Natl Sci Found, Grant No III-9260829.
101. Yancey RN (1994), Using computed tomography (CT) data for the micromechanical and structural modeling of advanced composites, Proc of the First Int Conf on Composites Eng (ICCE/1), 577-578.