메뉴 건너뛰기




Volumn 22, Issue 2, 1996, Pages 163-185

Buckling and postbuckling of composite panels with cutouts subjected to combined loads

Author keywords

[No Author keywords available]

Indexed keywords

ASPECT RATIO; BUCKLING; COMPOSITE MATERIALS; DYNAMIC RESPONSE; GEOMETRY; LOADS (FORCES); NUMERICAL METHODS; SENSITIVITY ANALYSIS; STABILITY; STIFFNESS; STRAIN; THERMAL LOAD;

EID: 0030168228     PISSN: 0168874X     EISSN: None     Source Type: Journal    
DOI: 10.1016/0168-874X(95)00052-U     Document Type: Article
Times cited : (21)

References (33)
  • 1
    • 0023163980 scopus 로고
    • On buckling of orthotropic compressed plates with circular hole
    • P. Larsson, 'On buckling of orthotropic compressed plates with circular hole", Compos. Struct. 7, pp. 103-121, 1987.
    • (1987) Compos. Struct. , vol.7 , pp. 103-121
    • Larsson, P.1
  • 2
    • 0023439439 scopus 로고
    • Postbuckling response of isotropic and laminated composite square plates with circular holes
    • D.J. Vanderbrink and M.P. Kamat, "Postbuckling response of isotropic and laminated composite square plates with circular holes", Finite Elements Anal. Des. 3, pp. 165-174, 1987.
    • (1987) Finite Elements Anal. Des. , vol.3 , pp. 165-174
    • Vanderbrink, D.J.1    Kamat, M.P.2
  • 3
    • 0023983992 scopus 로고
    • Buckling behavior of compression-loaded symmetrically laminated angle-ply plates with holes
    • M.P. Nemeth, "Buckling behavior of compression-loaded symmetrically laminated angle-ply plates with holes", AIAA J. 26, pp. 330-336, 1988.
    • (1988) AIAA J. , vol.26 , pp. 330-336
    • Nemeth, M.P.1
  • 5
    • 0024865228 scopus 로고
    • Buckling analysis of composite laminates
    • Y.J. Lee, H.J. Lin and C.C. Lin, "Buckling analysis of composite laminates", Compos. Struct. 12, pp. 133-148, 1989.
    • (1989) Compos. Struct. , vol.12 , pp. 133-148
    • Lee, Y.J.1    Lin, H.J.2    Lin, C.C.3
  • 6
    • 84970392984 scopus 로고
    • Measurements of the stress supported by the crush zone in open hole composite laminates loaded in compression
    • E.G. Guynn and W.L. Bradley, "Measurements of the stress supported by the crush zone in open hole composite laminates loaded in compression", J. Reinforced Plastics Compos. 8, pp. 133-149, 1989.
    • (1989) J. Reinforced Plastics Compos. , vol.8 , pp. 133-149
    • Guynn, E.G.1    Bradley, W.L.2
  • 7
    • 0024929891 scopus 로고
    • A study on the buckling behavior of an orthotropic square plate with a central circular hole
    • Y.J. Lee, H.J. Lin and C.C. Lin, "A study on the buckling behavior of an orthotropic square plate with a central circular hole", Compos. Struct. 13, pp. 173-188, 1989.
    • (1989) Compos. Struct. , vol.13 , pp. 173-188
    • Lee, Y.J.1    Lin, H.J.2    Lin, C.C.3
  • 8
    • 84970110582 scopus 로고
    • An experimental study of the initiation and progression of damage in compressively loaded composite laminates in the presence of a circular cutout
    • April 3-5, 1989, Mobile, AL, A Collection of Technical Papers, Part 4
    • A.M. Wass, CD. Babcock, Jr. and W.G. Knauss, "An experimental study of the initiation and progression of damage in compressively loaded composite laminates in the presence of a circular cutout", Proc. 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 3-5, 1989, Mobile, AL, A Collection of Technical Papers, Part 4, pp. 1000-1011, 1989.
    • (1989) Proc. 30th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf. , pp. 1000-1011
    • Wass, A.M.1    Babcock C.D., Jr.2    Knauss, W.G.3
  • 9
    • 0001485654 scopus 로고
    • Buckling of laminated plates with holes
    • C. Lin and C. Kuo, "Buckling of laminated plates with holes", J. Compos. Mater. 23, pp. 536-553, 1989.
    • (1989) J. Compos. Mater. , vol.23 , pp. 536-553
    • Lin, C.1    Kuo, C.2
  • 10
    • 0025225808 scopus 로고
    • Thermal buckling analysis of isotropic and composite plates with a hole
    • J. Chang and F. Shiao, "Thermal buckling analysis of isotropic and composite plates with a hole", J. Thermal Stresses 13, pp. 315-332, 1990.
    • (1990) J. Thermal Stresses , vol.13 , pp. 315-332
    • Chang, J.1    Shiao, F.2
  • 11
    • 0025233297 scopus 로고
    • Effect of cutouts or low-speed impact damage on the postbuckling behavior of composite plates loaded in shear
    • April 2-4, 1990, Long Beach, CA, A Collection of Technical Papers, Part 2
    • M. Rouse, "Effect of cutouts or low-speed impact damage on the postbuckling behavior of composite plates loaded in shear", Proc. 31st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 2-4, 1990, Long Beach, CA, A Collection of Technical Papers, Part 2, pp. 877-891, 1990.
    • (1990) Proc. 31st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 877-891
    • Rouse, M.1    Conf, M.2
  • 12
    • 0025462270 scopus 로고
    • Stability analysis of a thick plate with interior cutout
    • C.N. Chang and F.K. Chiang, "Stability analysis of a thick plate with interior cutout", AIAA J. 28, pp. 1285-1291, 1990.
    • (1990) AIAA J. , vol.28 , pp. 1285-1291
    • Chang, C.N.1    Chiang, F.K.2
  • 14
    • 0025157369 scopus 로고
    • An experimental study of compression failure of fibrous laminated composites in the presence of stress gradients
    • A.M. Wass, C.D. Babcock, Jr. and W.G. Knauss, "An experimental study of compression failure of fibrous laminated composites in the presence of stress gradients", Internat. J. Solids Struct. 26, pp. 1071-1098, 1990.
    • (1990) Internat. J. Solids Struct. , vol.26 , pp. 1071-1098
    • Wass, A.M.1    Babcock C.D., Jr.2    Knauss, W.G.3
  • 15
    • 0026107657 scopus 로고
    • Buckling and postbuckling behavior of compression-loaded isotropic plates with cutouts
    • M.P. Nemeth, "Buckling and postbuckling behavior of compression-loaded isotropic plates with cutouts", AIAA J. 29, pp. 313-314, 1991.
    • (1991) AIAA J. , vol.29 , pp. 313-314
    • Nemeth, M.P.1
  • 16
    • 0025794908 scopus 로고
    • The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes
    • M.W. Hyer and H.H. Lee, "The use of curvilinear fiber format to improve buckling resistance of composite plates with central circular holes", Compos. Struct. 18, pp. 239-261, 1991.
    • (1991) Compos. Struct. , vol.18 , pp. 239-261
    • Hyer, M.W.1    Lee, H.H.2
  • 17
    • 0025757727 scopus 로고
    • Thermal buckling behavior of composite laminated plates with a circular hole
    • W.J. Chen, P.D. Lin and L.W. Chen, "Thermal buckling behavior of composite laminated plates with a circular hole", Compos. Struct. 18, pp. 379-397, 1991.
    • (1991) Compos. Struct. , vol.18 , pp. 379-397
    • Chen, W.J.1    Lin, P.D.2    Chen, L.W.3
  • 18
    • 0041520377 scopus 로고
    • Postbuckling response and failure prediction of flat rectangular graphite-epoxy plates loaded in axial compression
    • April 8-10, 1991, Baltimore, MD, A Collection of Technical Papers, Part 2
    • S.P. Engelstad, J.N. Reddy and N.F. Knight, Jr., "Postbuckling response and failure prediction of flat rectangular graphite-epoxy plates loaded in axial compression", Proc. 32nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 8-10, 1991, Baltimore, MD, A Collection of Technical Papers, Part 2, pp. 888-895, 1991.
    • (1991) Proc. 32nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf. , pp. 888-895
    • Engelstad, S.P.1    Reddy, J.N.2    Knight N.F., Jr.3
  • 19
    • 0026851428 scopus 로고
    • Stability of laminated composite plates with cutouts
    • K.S. Srivatsa and A.V. Krishna Murty, "Stability of laminated composite plates with cutouts", Comput. Struct. 43, pp. 273-279, 1992.
    • (1992) Comput. Struct. , vol.43 , pp. 273-279
    • Srivatsa, K.S.1    Murty, A.V.K.2
  • 20
    • 0042522212 scopus 로고
    • Compression failure mechanisms of uni-ply composite plates with a circular cutout
    • April 13-15, 1992, Dallas, TX, A Collection of Technical Papers, Part 1
    • A.R. Khamseh and A.M. Wass, "Compression failure mechanisms of uni-ply composite plates with a circular cutout", Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 13-15, 1992, Dallas, TX, A Collection of Technical Papers, Part 1, pp. 163-173, 1992.
    • (1992) Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 163-173
    • Khamseh, A.R.1    Wass, A.M.2    Conf, M.3
  • 21
    • 0042021293 scopus 로고
    • Buckling analysis of fully anisotropic plates containing cutouts and elastically restrained edges
    • April 13-15, 1992, Dallas, TX, A Collection of Technical Papers, Part 1
    • K.M. Jones and E.C. Klang, "Buckling analysis of fully anisotropic plates containing cutouts and elastically restrained edges", Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 13-15, 1992, Dallas, TX, A Collection of Technical Papers, Part 1, pp. 190-200, 1992.
    • (1992) Proc. 33rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 190-200
    • Jones, K.M.1    Klang, E.C.2    Conf, M.3
  • 22
    • 0026923723 scopus 로고
    • Vibration and buckling of laminated plates with a cutout in hygrothermal environment
    • K.S.S. Ram and P.K. Sinha, "Vibration and buckling of laminated plates with a cutout in hygrothermal environment", AIAA J. 30, pp. 2353-2355, 1992.
    • (1992) AIAA J. , vol.30 , pp. 2353-2355
    • Ram, K.S.S.1    Sinha, P.K.2
  • 23
    • 0027313768 scopus 로고
    • Shear and compression buckling analysis for anisotropic panels with centrally located elliptical cutouts
    • April 19-22, 1993, La Jolla, CA, A Collection of Technical Papers, Part 4
    • V.O. Britt, "Shear and compression buckling analysis for anisotropic panels with centrally located elliptical cutouts", Proc. 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 19-22, 1993, La Jolla, CA, A Collection of Technical Papers, Part 4, pp. 2240-2249, 1993.
    • (1993) Proc. 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 2240-2249
    • Britt, V.O.1    Conf, M.2
  • 24
    • 0028700069 scopus 로고
    • Thermomechanical buckling of multilayered composite panels with cutouts
    • April 19-22, 1993, La Jolla, CA, A Collection of Technical Papers, Part 1
    • A.K. Noor and J.H. Starnes, Jr. and J.M. Peters, "Thermomechanical buckling of multilayered composite panels with cutouts", Proc. 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 19-22, 1993, La Jolla, CA, A Collection of Technical Papers, Part 1, pp. 336-350, 1993.
    • (1993) Proc. 34th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 336-350
    • Noor, A.K.1    Starnes J.H., Jr.2    Peters, J.M.3    Conf, M.4
  • 25
    • 0027624013 scopus 로고
    • Postbuckling failure of composite plates with holes
    • H.H. Lee and M.W. Hyer, "Postbuckling failure of composite plates with holes", AIAA J. 31, pp. 1293-1298, 1993.
    • (1993) AIAA J. , vol.31 , pp. 1293-1298
    • Lee, H.H.1    Hyer, M.W.2
  • 26
    • 0028336467 scopus 로고
    • Buckling and failure characteristics of compression-loaded stiffened composite panels with a hole, compos
    • S. Nagendra, Z. Gurdal, R.T. Haftka and J.H. Starnes, Jr., "Buckling and failure characteristics of compression-loaded stiffened composite panels with a hole", Compos. Struct. 28, pp. 1-17, 1994.
    • (1994) Struct. , vol.28 , pp. 1-17
    • Nagendra, S.1    Gurdal, Z.2    Haftka, R.T.3    Starnes J.H., Jr.4
  • 27
    • 0027150257 scopus 로고
    • Thermomechanical postbuckling of multilayered composite panels with cutouts
    • April 18-20, 1994, Hilton Head, SC, A Collection of Technical Papers, Part 1
    • A.K. Noor, J.H. Starnes, Jr. and J.M. Peters, "Thermomechanical postbuckling of multilayered composite panels with cutouts", Proc. 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conf., April 18-20, 1994, Hilton Head, SC, A Collection of Technical Papers, Part 1, pp. 466-484, 1994.
    • (1994) Proc. 35th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and , pp. 466-484
    • Noor, A.K.1    Starnes J.H., Jr.2    Peters, J.M.3    Conf, M.4
  • 28
    • 0028763559 scopus 로고
    • A computational procedure to calculate stress-strain field around simple shape holes in composite laminates
    • N. Bonora, M. Costanzi and M. Marchetti, "A computational procedure to calculate stress-strain field around simple shape holes in composite laminates", Comput. Struct. 53, pp. 1167-1179, 1994.
    • (1994) Comput. Struct. , vol.53 , pp. 1167-1179
    • Bonora, N.1    Costanzi, M.2    Marchetti, M.3
  • 29
    • 0000357867 scopus 로고
    • A solid element formulation for large deflection analysis of composite shell structures
    • Y.H. Kim and S.W. Lee, "A solid element formulation for large deflection analysis of composite shell structures", Comput. Struct. 30, pp. 269-274, 1988.
    • (1988) Comput. Struct. , vol.30 , pp. 269-274
    • Kim, Y.H.1    Lee, S.W.2
  • 30
    • 85029982914 scopus 로고    scopus 로고
    • Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change
    • A.K. Noor and Y.H. Kim, "Buckling and postbuckling of composite panels with cutouts subjected to combined edge shear and temperature change", Comput. Struct. (to appear).
    • Comput. Struct.
    • Noor, A.K.1    Kim, Y.H.2
  • 31
    • 0024701321 scopus 로고
    • Micromechanical analysis of composites by the method of cells
    • J. Aboudi, "Micromechanical analysis of composites by the method of cells", Appl. Mech. Rev. 42, pp. 193-221, 1989.
    • (1989) Appl. Mech. Rev. , vol.42 , pp. 193-221
    • Aboudi, J.1
  • 33
    • 0028445523 scopus 로고
    • Transverse shear stresses and their sensitivity coefficients in multilayered composite panels
    • A.K. Noor, Y.H. Kim and J.M. Peters, "Transverse shear stresses and their sensitivity coefficients in multilayered composite panels", AIAA J. 32, pp. 1259-1269, 1994.
    • (1994) AIAA J. , vol.32 , pp. 1259-1269
    • Noor, A.K.1    Kim, Y.H.2    Peters, J.M.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.