Theoretical and experimental considerations in representing macroscale flow/damage surfaces for metal matrix composites

International Journal of Plasticity

Volumn 13, Issue 4, 1997, Pages 327-358

  Lissenden, Cliff J ^a   Arnold, Steven M ^b  

^a PENNSYLVANIA STATE UNIVERSITY   (United States)

^b NASA GLENN RESEARCH CENTER   (United States)

Author keywords

A. crack propagation and arrest; B. elastic viscoplastic material; C. mechanical testing; Fibre reinforced composite materials; Micromechanics

Indexed keywords

COMPOSITE MICROMECHANICS; MATHEMATICAL MODELS; RESIDUAL STRESSES; SILICON CARBIDE; SURFACES; TITANIUM; VISCOPLASTICITY;

CONSTITUTIVE MODELS; DEBONDING;

METALLIC MATRIX COMPOSITES;

EID: 0030720635     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0749-6419(97)80003-4     Document Type: Article

References (46)

1. Aboudi, J. (1989) Micromechanical analysis of fibrous composites with coulomb frictional slippage between the phases. Mech. of Mater. 8, 103.
2. Aboudi, J. (1991) Mechanics of Composite Materials: A Unified Micromechanical Approach. Elsevier, Amsterdam.
3. Aboudi, J. (1995) Micromechanical analysis of thermo-inelastic multiphase short-fiber composites. Compos. Eng. 5, 839.
4. Arnold, S. M. and Castelli, M. G. (1995) What constitutes a model material? HITEMP Review 1995, Volume II: Compressor/Turbine Materials, NASA CP-10178, pp. 35A:1-18.
5. Arnold, S. M. and Saleeb, A. F. (1994) On the thermodynamic framework of generalized coupled thermoelastic-viscoplastic-damage modeling. Int. J. Plasticity 10, 263.
6. Arnold, S. M., Wilt T. E., Saleeb, A. F. and Castelli, M. G. (1993) An investigation of macro and micromechanical approaches for a model MMC system. HITEMP Review 1993, Volume II: Compressor/Turbine Materials. NASA CP-19117, pp. 52:1-12.
7. Arnold, S. M., Saleeb, A. F. and Wilt, T. E. (1995) A modeling investigation of thermal and strain induced recovery and nonlinear hardening in potential based viscoplasticity. J. Eng. Mater. Technol. 117, 157.
8. Arnold, S. M., Saleeb, A. F. and Castelli, M. G. (1996a) A fully associative, nonisothermal, nonlinear kinematic, unified viscoplastic model for titanium alloys. In Thermo-Mechanical Fatigue Behavior of Materials: Second Volume, eds M. J. Verrilli and M. G. Castelli, pp. 146-173. ASTM STP-1263, American Society for Testing and Materials, Philadelphia.
9. Arnold, S. M., Saleeb, A. F. and Castelli, M. G. (1996b) A fully associative, nonlinear kinematic, unified viscoplastic model for titanium based matrices. In Life Prediction Methodology for Titanium Matrix Composites, eds W. S. Johnson, J. M. Larsen and B. N. Cox, pp 231-256. ASTM STP-1253, American Society for Testing and Materials, Philadelphia.
10. Battiste, R. L. and Ball, S. J. (1986) Determination of surfaces of constant inelastic strain rate at elevated temperatures. In Proc. Turbine Engine Hot Section Technology, NASA CP-2444, Oct. 1986. NASA Lewis Research Center, Cleveland, pp. 307-325.
11. Bodner, S. R. (1987) Review of a unified elastic-viscoplastic theory. In Unified Constitutive Equations for Creep and Plasticity, ed. A. K. Miller, pp. 273-301. Elsevier, New York.
12. Brayshaw, J. B. (1994) Consistent formulation of the method of cells micromechanics model for transversely isotropic metal matrix composites. Ph.D. thesis, University of Virginia, Charlottesville.
13. Chan, K. S., Bodner, S. R. and Lindholm, U. S. (1988) Phenomenological modeling of hardening and thermal recovery in metals. J. Eng. Mater. Technol. 110, 1.
14. Chan, K. S. and Lindholm, U. S. (1990) Inelastic deformation under nonisothermal loading. J. Eng. Mater. Technol. 112, 15.
15. Clinard, J. A. and Lacombe, C. (1988) Determination of Multiaxial Flow Surfaces at Elevated Temperatures Using the Concept of Dissipation Potential. ORNL TM-10787, Oak Ridge National Laboratory, Tennessee.
16. Dvorak, G. J. (1991) Plasticity theories for fibrous composite materials. In Metal Matrix Composites: Mechanisms and Properties, eds R. K. Everett and R. J. Arsenault, pp. 1-77. Academic Press, Boston.
17. Dvorak, G. J. and Bahei-El-Din, Y. A. (1987) Bimodal plasticity theory of fibrous composite materials. Acta Mech. 69, 219.
18. Dvorak, G. J., Rao, M. S. M and Tarn, J. Q. (1973) Yielding in unidirectional composites under external loads and temperature changes. J. Compos. Mater. 7, 194.
19. Ellis, J. R., Robinson, D. N. and Pugh, C. E. (1978) Behavior of annealed type 316 stainless steel under monotonic and cyclic loading at room temperature. J. Nuclear Engng. Design 47, 115.
20. Freed, A. D. and Walker, K. P. (1995) Viscoplastic model development with an eye toward characterization. J. Eng. Mater. Technol. 117, 8.
21. Helling, D. E. and Miller, A. K. (1987) The incorporation of yield surface distortion into a unified constitutive model, Part 1: Equation development. Acta Mech. 69, 9.
22. Helling, D. E., Miller, A. K. and Stout, M. G. (1986) An experimental investigation of the yield loci of 1100-0 aluminum, 70:30 brass, and an overaged 2024 aluminum alloy after various prestrains. J. Eng. Mater. Technol. 108, 313.
23. 3 theory of viscoplasticity for high-temperature isotropic materials. Masters thesis, University of Akron, OH.
24. Jansson, S., Deve, H. E. and Evans, A. G. (1991) The anisotropic mechanical properties of a Ti matrix composite reinforced with SiC fibers. Metall. Trans., A 22A, 2975.
25. 6/Ti-15-3 metal matrix composites at room temperature. In Thermal and Mechanical Behavior of Metal Matrix and Ceramic Matrix Composites, eds J. M. Kennedy, H. H. Moeller and W. S. Johnson, pp. 193-218. ASTM STP 1080, American Society for Testing and Materials, Philadelphia.
26. Kroupa, J. L. and Neu, R. W. (1993) Implementation of a Nonisothermal Unified Inelastic-Strain Theory into ADIN A6.0 for a Titanium Alloy-User Guide. Wright Laboratory WL-TR-93-4005, University of Dayton, Dayton.
27. Lerch, B. A. and Saltsman, J. F. (1993) Tensile deformation of SiC/Ti-15-3 laminates. In Composite Materials: Fatigue and Fracture, eds W. W. Stinchcomb, and N. E. Ashbaugh, Fourth Volume, ASTM STP 1156, pp. 161-175. American Society for Testing and Materials, Philadelphia.
28. Lissenden, C. J. (1996) Fiber-matrix interfacial constitutive relations for viscoplastic composites (Submitted for publication)
29. Lissenden, C. J., Lerch, B. A. and Herakovich, C. T. (1996) Response of SiC/Ti under combined loading - Part III. Microstructutal evaluation. J. Compos. Mater. 30, 84.
30. Lissenden, C. J., Lerch, B. A., Ellis, J. R. and Robinson, D. N. (1997) Experimental determination of yield and flow surfaces under axial-torsional loading. In Multiaxial Fatigue and Deformation Testing Techniques, eds S. Kalluri and P. J. Bonacuse, pp. 92-112. ASTM STP 1280, American Society of Testing and Materials, Philadelphia.
31. Liu, K. C. and Greenstreet, W. L. (1976) Experimental studies to examine elastic-plastic behavior of metal alloys used in nuclear structures. In Constitutive Equations in Viscoplasticity: Computational and Engineering Aspects, ed. K. C. Valanis, AMD-Vol. 20, pp. 35-56. American Society of Mechanical Engineers, New York.
32. Majumdar, B. S. and Newaz, G. M. (1992) Inelastic deformation of metal matrix composites: plasticity and damage mechanisms. Philos. Mag. A 66, 187.
33. McGee, J. D. (1992) Micromechanics of fiber/matrix debonding. Thesis, University of Virginia, Charlottesville.
34. Needleman, A. (1987) A continuum model for void nucleation by inclusion debonding. J. Appl. Mech. 54, 525.
35. Oytana, C., Delobelle, P. and Mermet, A. (1982) Constitutive equations study in biaxial stress experiments. J. Eng. Mater. Technol. 104, 1.
36. Paley, M. and Aboudi, J. (1992) Micromechanical analysis of composites by the generalized cells model. Mech. of Mater. 14, 127.
37. Phillips, A. (1974) The foundations of thermoplasticity - experiment and theory. In Topics in Applied Continuum Mechanics, eds J. L. Zemen, F. Ziegler and H. Parkus, pp. 1-21. Springer-Verlag, Wien-New York.
38. Phillips, A., Liu, C. S. and Justusson, J. W. (1972) An experimental investigation of yield surfaces at elevated temperature. Acta Mech. 14, 119.
39. Pindera, M. J. and Aboudi, J. (1988) Micromechanical analysis of yielding of metal matrix composites. Int. J. Plasticity 4, 195.
40. Robinson, D. N. (1985) On Thermomechanical Testing in Support of Constitutive Equation Development for High-Temperature Alloys. NASA CR-174879, NASA Lewis Research Center, Cleveland.
41. Robinson, D. N. and Duffy, S. F. (1990) Continuum deformation theory for high-temperature metallic composites. J. Eng. Mech. 116, 832.
42. Robinson, D. N. and Ellis, J. R. (1986) A multiaxial theory of viscoplasticity for isotropic materials. In Proc. Turbine Engine Hot Section Technology, NASA CP-2444, Oct. 1986. NASA Lewis Research Center, Cleveland, pp. 283-292.
43. Saleeb, A. F. and Wilt, T. E. (1993) Analysis of the anisotropic viscoplastic-damage response of composite laminates - continuum basis and computational algorithms. Int. J. Numer. Methods Engng. 36, 1629.
44. Spencer, A. J. M. (1972) Deformations of Fiber-Reinforced Materials. Clarendon Press, Oxford.
45. Tvergaard, V. (1990) Effect of fibre debonding in a whisker-reinforced metal. Mater. Sci. Eng. A125, 203.
46. Walker, K. P. (1981) Research and Development Program for Nonlinear Structural Modeling with Advanced Time-Temperature Dependent Constitutive Relationships. NASA CR-165533, NASA Lewis Research Center, Cleveland.