Earthquake Risk Reduction

Earthquake Risk Reduction

Volumn , Issue , 2005, Pages 1-506

  Dowrick, David J ^a  

^a GNS SCIENCE   (New Zealand)

Author keywords

[No Author keywords available]

Indexed keywords

ARCHITECTURE; CONSTRUCTION EQUIPMENT; EARTHQUAKES; LOSSES; MASONRY MATERIALS; RISK ASSESSMENT; RISK MANAGEMENT; SOIL MECHANICS; SOILS; STRUCTURAL GEOLOGY;

ARCHITECTURAL COMPONENTS; CONCRETE , REINFORCED; CONSTRUCTION PROCEDURES; EARTHQUAKE-RESISTANT DESIGN; HAZARD AND RISK ASSESSMENTS; MULTI-DISCIPLINARY PROCESS; POSTGRADUATE STUDENTS; PROFESSIONAL EXPERIENCES;

EARTHQUAKE ENGINEERING;

EID: 1542363048     PISSN: None     EISSN: None     Source Type: Book    
DOI: 10.1002/0470869356     Document Type: Book

References (559)

1. Dowrick DJ (2002) Earthquake risk reduction actions for New Zealand. Technical Conference of NZ Soc Earthq Eng, Napier.
2. EERI Committee on Seismic Risk (1984) Glossary of terms for probabilistic seismic-risk and hazard analysis. Earthq Spectra 1: 33-40.
3. Elms DG and Silvester D (1978) Cost effectiveness of code base shear requirements for reinforced concrete frame structures. Bull NZ Nat Soc for Earthq Eng 11(2): 85-93.
4. Hollings JP (1971) The economics of earthquake engineering. Bull NZ Soc for Earthq Eng 4(2): 205-21.
5. NZSEE (2002) Assessment and improvement of the structural performance of buildings in earthquake. Recommendations of an NZSEE Study Group on Earthquake Risk Buildings, prepared for the Building Industry Authority. Draft for Comment 4 September 2002.
6. Smolka A (2000) Earthquake research and the insurance industry. NZ Geophys Soc Newsletter No 55: 22-5.
7. Steinbrugge KV (1982) Earthquakes, Volcanoes, and Tsunamis-an Anatomy of Hazards. Skandia America Group, New York.
8. Whitman RV, Biggs JM, Brennan J, Cornell CA, de Neufville R and Vanmarcke EH (1974) Seismic design analysis, Structures Publication No. 381, Massachusetts Institute of Technology.
9. Ambraseys NN and Free MW (1997) Surface-wave magnitude calibration for European region earthquakes. J Earthq Eng 1(1): 1-22.
10. Barazangi M and Dorman J (1969) World seismicity map of ESSA coast and geodetic survey epicentre data for 1961-67. Bull Seism Soc Amer 59: 369-80.
11. Bolt B (1999) Earthquakes. WH Freeman & Co, New York, 4th Edn.
12. Chopra AK and Chakrabarti P (1973) The Koyna earthquake and damage to Koyna dam. Bull Seism Soc Amer 63(2): 381-97.
13. Dowrick DJ (1996) The Modified Mercalli earthquake intensity scale-Revisions arising from recent studies of New Zealand earthquakes. Bull NZ Nat Soc Earthq Eng 29(2): 92-106.
14. Dowrick DJ and Rhoades DA (1998) Magnitudes of New Zealand earthquakes, 1901-1993. Bull NZ Soc Earthq Eng 31(4): 260-80.
15. Ekström G and Dziewonski AM (1988) Evidence of bias in estimations of earthquake size. Nature 332: 319-323.
16. Hanks TC and Kanamori H (1979) A moment magnitude scale. J Geophys Res B 84: 2348-50.
17. Kanamori H (1977) The energy release in great earthquakes. J Geophys Res 82: 2981-87.
18. Karnik V (1969) Seismicity of the European Area, Part 1. Reidel, Dordrecht, Holland.
19. Lay T and Wallace TC (1995) Modern Global Seismology. Academic Press, San Diego.
20. Richter CF (1958) Elementary Seismology. Freeman, San Francisco.
21. Stevens GR (1980) New Zealand Adrift. AH & AW Reed, Wellington.
22. Walcott RI (1981) The gates of stress and strain. In: Large Earthquakes in New Zealand. The Royal Society of New Zealand, Miscellaneous Series No 5.
23. Wyss M and Brune J (1968) Seismic moment, stress and source dimensions. J Geophys Res 73:4681-94.
24. Cluff LS (1971) Peru earthquake of May 31, 1970; engineering geology observations. Bull Seism Soc Amer 61(3): 5111-33.
25. Espinosa AF and Algermissen (1972) Soil amplification studies in areas damaged by the Caracas earthquake of July 29, 1967. Proc Microzonation Conf. Seattle, Washington II: 455-64.
26. Henkel DJ (1970) The role of waves in causing submarine landslides. Geotechnique 20: 75-80.
27. Housner GW and Jennings PC (1972) The San Fernando California earthquake. Int J Of Earthq Eng Struc Dyn 1: 5-32.
28. Kramer SL (1996) Geotechnical earthquake engineering. Prentice Hall, Upper Saddle River, USA.
29. Kulhawy FW and Mayne PW (1990) Manual for estimating soil properties for foundation design. Research Report EL-6800, Geotechnical Eng Group, Civil Eng Dept, Cornell University.
30. Nakamura Y (1989) A method for dynamic characteristics estimation of subsurface using microtremors on the ground surface. Quarterly Report of the Railway Technical Research Institute, Tokyo, 30: 25-33.
31. Ove Arup and Partners (1980) Earthquake effects on platforms and pipelines in the UK offshore area. Report to the UK Dept of Energy OT-R 7950.
32. Ravarra A, Pereira J, Oliveira C and Lourtie P (1971) Estudos estruturais dos edificíos de Parque Central-2° Relatóniò: Análise dinamica dos edeficíos de apartamentos. LNEC Report, Lisbon.
33. Romo MP and Seed HB (1986) Analytical modelling of dynamic soil response in the Mexico earthquake of September 19, 1985. In The Mexico earthquakes 1985-Factors involved and lessons learned. ASCE: 148-162.
34. Rosenblueth E (1960) Earthquake of 28th July, 1957 in Mexico City. Proc. World Conf Earthq Eng, Japan 1: 359-79.
35. Schmertmann JH (1970) Static cone to compute static settlement of sand. J Soil Mech Found Divn, ASCE 96(SM3): 1011-43.
36. Seed HB (1968) Landslides during earthquake due to soil liquefaction. J Soil Mech Found Divn 94 (SM5): 1053-122.
37. Seed HB, Ugas C and Lysmer J (1974) Site dependent spectra for earthquake resistant design. Report No EERC 74-12, Earthquake Engineering Research Center, University of California, Berkeley.
38. Seed HB, Whitman RV, Dezfulian H, Dobry R and Idriss IM (1972) Soil conditions and building damage in the 1967 Caracas earthquake. J Soil Mech Found Divn 90(SM8): 787-806.
39. Suzuki Z (Ed) (1971) General Report on the Tokachi-Oki earthquake of 1968. Keigaki Publishing Co, Tokyo.
40. Wiegel RL (1976) Tsunamis. In Seismic risk and engineering decisions (Ed. C Lomnitz and E Rosenblueth). Elsevier, Amsterdam.
41. Wilson SD and Dietrich RJ (1960) Effect of consolidation pressure on elastic and strength properties of clay. Proc. ASCE Res Conf on Shear Strength of Cohesive Soils, University of Colorado: 419-35, discussion: 1086-92.
42. Wood SH et al. (1985) The Borah Peak, Idaho earthquake of October 28, 1983-Hydrologic effects. Earthquake Spectra 2(1): 127-50.
43. Aagaard BT, Hall JF and Heaton TH (2001) Characterization of near-source ground motions with earthquake simulations. Earthq Spectra 17(2): 177-207.
44. Abrahamson N and Silva W (1997) Empirical response attenuation relations for shallow crustal earthquakes. Seism Res Letters 68(1): 94-117.
45. Abrahamson NA and Somerville PG (1996) Effects of hanging wall and foot wall on ground motions recorded during the Northridge earthquake. Bull Seism Soc Am 86: S93-9.
46. Aki K (1984) Prediction of strong motion using physical models of earthquake faulting. Proc. 8th World Conf Earthq Eng, San Francisco II: 433-40.
47. Allen CR (1976) Geological criteria for evaluating seismicity. In Seismic Risk and Engineering Decisions (Eds. C Lomnitz and E Rosenblueth). Elsevier, Amsterdam.
48. Ambraseys NN (1971) Value of historical records of earthquakes. Nature 232(5310): 375-9.
49. Ambraseys NN, Simpson KA and Bommer JJ (1996) Prediction of horizontal response spectra in Europe. Earthq Eng Struc Dyn 25: 371-400.
50. Anderson JG (1979) Estimating the seismicity from geological structure for seismic risk studies. Bull Seism Soc Am 69(1): 135-58.
51. Anderson JG and Luco JE (1983) Consequences of slip rate constraints on earthquake occurrence relations. Bull Seism Soc Amer 73(2): 471-96.
52. Anderson JG, Wesnousky SG and Stirling MW (1996) Earthquake size as a function of fault slip rate. Bull Seis Soc Am 86: 683-90.
53. Arias A (1970) A measure of earthquake intensity. In Seismic Design for Nuclear Power Plants (Ed. Hanson R). MIT Press, Cambridge Massachusetts, 438-83.
54. Atkinson GM and Boore DM (1995) Ground-motion relations for eastern North America. Bull Seism Soc Am 85: 17-30.
55. Atkinson G and Somerville P (1994) Calibration of time history simulation methods. Bull Seism Soc Am 84: 400-14.
56. Bak P and Tang C (1989) Earthquakes as a self-organized critical phenomenon. J Geophys Res 94: 15635-7.
57. Beanland S and Fellows DL (1984) Late quaternary tectonic deformation in the Kawarau River area, Central Otago. NZ Geol Survey/EDS Immediate Report 84/019, Dept Scientific and Industrial Research, New Zealand.
58. Berrill JB, Priestley NJM and Peek R (1981) Further comments on seismic design loads for bridges. Bull NZ Nat Soc Earthq Eng 14: 3-11.
59. Bolt B (1999) Earthquakes. WH Freeman and Co, New York, 4th Edn.
60. Bommer J (2002) Deterministic vs. probabilistic hazard assessment: an exaggerated and obstructive dichotomy. J Earthq Eng 6 (Special Issue 1): 43-73.
61. Bommer JJ and Martínez-Pereira A (1999) The effective duration of earthquake strong motion. J Earthq Eng 3: 127-72.
62. Bommer JJ, Elnashai AS, Chliminatzas GO and Lee D (1998) Review and development of response spectra for displacement-based design. ESEE Research Rept No 98-3, Imperial College, London.
63. Bonilla MG (1970) Surface faulting and related effects. In Earthquake Engineering (Ed. RL Wiegel). Prentice-Hall, Englewood Cliffs, New Jersey.
64. Boore DM (1983) Stochastic simulation of high-frequency ground motions based on seismological model of radiated spectra. Bull Seism Soc Am 73(6): 1865-94.
65. Boore DM and Atkinson G (1987) Stochastic prediction of ground motion and spectral response parameters at hard-rock sites in eastern North America. Bull Seism Soc Am 73: 1865-94.
66. Bowman DD, Ouillon G, Sammis CG, Sornette A and Sornette D (1998) An observational test of the critical earthquake concept. J Geophys Res 103: 24359-72.
67. Brune JN (1970) Tectonic stress and spectra of shear waves from earthquakes. J Geophys Res 75: 4997-5009.
68. Brune JN (1976) The physics of earthquake strong motion. In Seismic Risk and Engineering Decisions (Eds. C Lomnitz and E Rosenblueth). Elsevier, Amsterdam.
69. Burger RW, Somerville PG, Barker JS, Hermann RB and Helmberger DV (1987) The effect of crustal structure on strong ground motion attenuation relations in eastern North America. Bull Seism Soc Am 77: 420-39.
70. Burridge R and Knopoff L (1967) Model and theoretical seismicity. Bull Seism Soc Am 57:341-71.
71. Carmona JS and Castano JC (1973) Seismic risk in South America to the south of 20 degrees. Proc. 5th World Conf Earthq Eng, Rome 2: 1644-53.
72. Chinnery MA and North RJ (1975) The frequency of very large earthquakes. Science 190:1197-8.
73. Chopra AK and Goel RK (2001) Direct displacement-based design: Use of inelastic vs. elastic design spectra. Earthq Spectra 17(1): 47-64.
74. Cifuentes IL (1989) The 1960 Chilean earthquakes. J Geoph Res 94(B1): 665-80.
75. Clark RH, Dibble RR, Fyle HE, Lensen GJ and Suggate RP (1965) Tectonic and earthquake risk zoning in New Zealand. Proc. 3rd World Conf Earthq Eng. New Zealand 1: I-107-I-124.
76. Console R and Murru M (2001) A simple and testable model for earthquake clustering. J Geophys Res 106(B5): 8699-711.
77. Cornell CA (1968) Engineering seismic risk analysis. Bull NZ Nat Soc Am 58(5): 1583-606.
78. Cousins WJ, Zhao JX and Perrin ND (1999) A model for the attenuation of peak ground accelerations in New Zealand earthquakes based on seismograph and accelerographic data. Bull NZ Soc Earthq Eng 32(4): 193-220.
79. Davenport PN (2003) Instrumental measures of earthquake intensity in New Zealand. Proc. Pacific Conf on Earthq Eng, Christchurch.
80. Dewey JW, Reagor BG, Dengler L and Moley K (1995) Intensity distribution and isoseismal maps for the Northridge, California, earthquake of July 17, 1994. US Geological Survey, Open-File Report 95-2.
81. Donovan NC (1973) A statistical evaluation of strong motion data including the February 9, 1971 San Fernando earthquake. Proc. 5th World Conf Earthq Eng, Rome 1: 1252-61.
82. Dowrick DJ (1981) Earthquake risk and design ground motions in the UK offshore area. Proc Inst Civ Engrs 71: 305-21.
83. Dowrick DJ (1996) The Modified Mercalli earthquake intensity scale-Revisions arising from recent studies of New Zealand earthquakes. Bull NZ Nat Soc Earthq Eng 29(2): 92-106.
84. Dowrick DJ and Cousins WJ (2003) Historical incidence of Modified Mercalli intensity in New Zealand and comparisons with hazard models. Bull NZ Nat Soc Earthq Eng 36(1): 1-24.
85. Dowrick DJ and Rhoades DA (1999) Attenuation of Modified Mercalli intensity in New Zealand earthquakes. Bull NZ Soc Earthq Eng 32: 55-89.
86. Dowrick DJ and Rhoades DA (in prep, 2003a) Relationships between earthquake magnitude and fault rupture dimensions-How reliable are they? (to be submitted to Bull Seism Soc Am).
87. Dowrick DJ and Rhoades DA (in prep, 2003b) Attenuation of Modified Mercalli intensity in New Zealand earthquakes-II. (to be submitted to Bull NZ Soc Earthq Eng).
88. Dowrick DJ, Berryman KR, McVerry GH and Zhao JX (1998) Earthquake hazard in Christchurch. Bull NZ Nat Soc Earthq Eng 31(1): 1-23.
89. EERI Committee on Scientific Risk (1984) Glossary of terms for probabilistic seismic-risk and hazard analysis. Earthquake Spectra 1(1): 33-40.
90. Ellsworth WL, Matthews MV, Nadeau RM, Nishenko SP, Reasenberg PA and Simpson RW (1999) A physically based earthquake recurrence model for estimation of long-term probabilities. US Geological Survey Open File Report #99-522.
91. Evison F and Rhoades D (2001) Model of long-term seismogenesis. Annali di Geofisica 44:81-93.
92. Evison FF and Rhoades DA (2002) Demarcation and scaling of long-term seismogenesis. Pure Appl Geophys (submitted 2002).
93. Grapes R and Downes G (1997) The 1855 Wairarapa, New Zealand, earthquake-analysis of historical data. Bull NZ Natl Soc Earthq Eng 30: 271-368.
94. Graves RW, Pitarka A and Somerville PG (1998) Ground motion amplification in the Santa Monica area: effects of shallow basin edge structure. Bull Seism Soc Am 88: 1224-42.
95. Gubin IE (1967) Earthquakes and seismic zoning. Bull Int Institute of Seism Earthq Eng 4:107-26.
96. Gutenberg B and Richter CF (1965) Seismicity of the Earth. Hafner, New York.
97. Hall WJ, Nau JM and Zahrah FT (1984) Sealing of response spectra and energy dissipation in SDOF systems. Proc. 8th World Conf Earthq Eng, San Francisco IV: 7-14.
98. Hancox GT, Beanland S and Brown IR (1985) Seismotectonic hazard evaluation for the Kawarau River Power Development, NZ Geol Survey Rept EG 384, Dept Scientific and Industrial Res, Lower Hutt, New Zealand.
99. Hanks TC (1982) fmax. Bull Seism Soc Am 72(6): Part A, 1867-79.
100. Hatton JW and Foster PF (1987) Seismic considerations for the Clyde Dam. IPENZ Trans 14(3/CE): 129-40.
101. Hermann RB and Nuttli OW (1984) Scaling and attenuation relations for strong ground motion in eastern North America. Proc. 8th World Conf Earthq Eng, San Francisco II: 305-9.
102. Housner GW (1959) Behaviour of structures during earthquakes. J Eng Mech Divn ASCE 85(EM4): 109-29.
103. Housner GW (1973) Important features of earthquake ground motions. Proc. 5th World Conf Earthq Eng, Rome 1: CLIX-CLXVIII.
104. Husid LR (1969) Características de terremotos. Análysis general. Revista Del IDIEM 8, Santiago de Chile, 21-42.
105. Kasahara K (1981) Earthquake Mechanics. Cambridge University Press, Cambridge.
106. Kijko A and Sellevoll MA (1989) Estimation of earthquake hazard parameters from incomplete data files. Part I, Utilization of extreme and incomplete catalogues with different threshold magnitudes. Bull Seism Soc Am 79: 645-54.
107. Kiremidjian A and Anagnos T (1984) Stochastic slip-predictable model for earthquake occurrences. Bull Seism Soc Am 74: 739-55.
108. Klimkiewicz GC, Leblanc G, Holt RJ and Thiruvengodam TR (1984) Relative seismic hazard assessment for the north central United States. Proc. 8th World Conf Earthq Eng I: 149-56.
109. Kostrov BV (1974) Seismic moment and energy of earthquakes, and seismic flow of rock. Izv Acad Sci USSR Phys Solid Earth 1: 23-40.
110. Lam NTK (1993) Assessment of torsion in regular multi-storey buildings subjected to earthquake ground motion. PhD thesis, The University of Melbourne.
111. Lam NTK (1999) Program "GENQKE" users guide: Program for generating accelerograms based on stochastic simulation of seismological models. Dept Civil and Environmental Eng, The University of Melbourne.
112. Lam N, Wilson J and Hutchinson G (2000) Generation of synthetic earthquake accelerograms using seismological modelling: a review. J Earthq Eng 4: 321-54.
113. Leyendecker EV, Hunt RJ, Frankel AD and Ruckstales KS (2000) Development of maximum considered earthquake ground motion maps. Earthq Spectra 16: 21-40.
114. Lomnitz C (1974) Global tectonics and earthquake risk. Elsevier, Amsterdam.
115. McCann MW and Boore DM (1983) Variability in ground motions: root mean square acceleration and peak acceleration for the 1971 San Francisco earthquake. Bull Seism Soc Am 73(2): 615-32.
116. McGuire RK (1979) Adequacy of simple probabilistic models for calculating felt-shaking hazard, using the Chinese earthquakes catalogue. Bull Seism Soc Am 69(3): 877-92.
117. McVerry GH, Zhao JX, Abrahamson NA and Somerville PG (2000) Crustal and subduction zone attenuation relations for New Zealand earthquakes. Proc. 12th World Conf Earthq Eng. Auckland.
118. Mei Shi-yun (1960) Characteristics of earthquake activity in China. Acta Geophys Sin 9: 1-9 (in Chinese).
119. Menu J-HM (1991) Influence de la prise en compte des mouvements forts des seismes. Rapport CEA/SM009/F.
120. Midorikawa S (1993) Semi-empirical estimation of peak ground acceleration from large earthquake. Tectonophysics 218: 287-95.
121. Murphy JR and O'Brien JL (1977) The correlation of peak ground acceleration amplitude with seismic intensity and other physical parameters. Bull Seism Soc Am 67(3): 877-915.
122. Newmark NM and Hall WJ (1982) Earthquake Spectra and Design. Earthquake Engineering Research Institute, Berkeley, California.
123. Nuttli OW (1983) Average seismic source-parameter relations for mid-plate earthquakes. Bull Seism Soc Am 73(2): 519-35.
124. NZ Geological Survey (1984) Seismotectonic hazard evaluation for Upper Clutha lower development. NZGS Rept EG 377, Dept Scientific and Industrial Research, New Zealand.
125. Ogata Y (1989) Statistical models for standard seismicity and detection of anomalies by residual analysis. Tectonophysics 169: 159-74.
126. Pitarka A, Irikura K, Iwata T and Sekiguchi H (1998) Three-dimensional simulation of the nearfault ground motion for the 1995 Hyogo-ken Nanbu (Kobe), Japan, earthquake. Bull Seism Soc Am 88: 428-40.
127. Rhoades DA (1996) Estimation of the Gutenberg-Richter relation allowing for individual earthquake uncertainties. Tectonophysics 258: 71-83.
128. Rhoades DA and Dowrick DJ (2000) Effects of magnitude uncertainties on seismic hazard estimates. Proc. 12th World Conf Earthq Eng. Auckland.
129. Rhoades DA and Evison FF (2002) Long-range earthquake forecasting with every earthquake a precursor according to scale. Pure Appl. Geophys (submitted 2002).
130. Rhoades DA, Van Dissen RJ and Dowrick DJ (1994) On the handling of uncertainties in estimating the hazard of rupture on a fault segment. J Geophys Res 99: 13701-12.
131. Richter CF (1958) Elementary Seismology. Freeman, San Francisco.
132. Sadigh K, Chang C-K, Egan JA, Makidisi F and Youngs RR (1997) Attenuation relationships for shallow crustal earthquakes based on Californian strong motion data. Seism Res Letters 68(1): 180-9.
133. Scholz CH (1968) The frequency-magnitude relationships of microfacturing in rock and its relationship to earthquakes. Bull Seism Soc Am 58(2): 399-415.
134. Scholz CH (1990) The Mechanics of Earthquakes and Faulting. Cambridge University Press, Cambridge, UK.
135. Scholz CH, Aviles C and Wesnousky S (1986) Scaling differences between large intraplate and interplate earthquakes. Bull Seism Soc Am 76: 65-70.
136. SIMQKE-1 (1976) A program for artificial motion generation: User's Manual and Documentation. Dept Civil Eng, Massachusetts Institute of Technology (Revised 1990).
137. Somerville P (2000a) Seismic hazard evaluation. Bull NZ Soc Earthq Eng 33: 371-86 (and figures in 33: 484-91).
138. Somerville (2000b) Reducing uncertainty in strong motion prediction. Proc. 12th World Conf Earthq Eng. Auckland.
139. Somerville M, McCue K and Sinadinovski C (1998) Response spectra recommended for Australia. Proc. Australasian Struc Eng Conf. Auckland, 439-44.
140. Somerville PG, Smith NF and Graves RW (1994) The effect of critical Moho reflections on the attenuation of strong motion from the 1989 Loma Prieta earthquake. In The Loma Prieta, California, earthquake of October 17, 1989-Strong ground motion, US Geol Survey Prof Paper 1555-A, A67-A75.
141. Somerville PG, Smith NF, Graves RW and Abrahamson NA (1997) Modification of empirical strong motion attenuation relations to include the amplitude and duration effects of rupture directivity. Seism Res Letters 68(1): 199-222.
142. Somerville PG, Irikura K, Graves R, Sawada S,Wald D, Abrahamson N, Iwasaki Y, Kagawa T, Smith N and Kowada A (1999) Characterizing earthquake slip models for the prediction of strong ground motion. Seism Res Letters 70: 59-80.
143. Spellman HA, Stellar JR and Shlemon RJ (1984) Risk evaluation for construction over an active fault, Sylmar, California. Proc. 8th World Conf Earthq Eng, San Francisco I: 15-22.
144. Stirling M, Rhoades D and Berryman K (2002) Comparison of earthquake scaling relations derived from data of the instrumental and pre-instrumental eras. Bull Seism Soc Am 92(2): 812-30.
145. Stirling M, McVerry G, Berryman K, McGinty P, Villamor P, Van Dissen R, Dowrick D, Cousins J and Sutherland R (2000) Probabilistic seismic hazard assessment of New Zealand. Report prepared for Earthquake Commission Research Foundation, Institute Of Geological and Nuclear Sciences Client Report 2000/53.
146. Trifunac MD (1989) Dependence of Fourier amplitude spectrum amplitudes of record earthquake accelerations on magnitude, local soil conditions and on depth of sediments. Earthq Engrg Struct Dyn 18: 999-1016.
147. Trifunac MD and Brady AG (1975) A study on the duration of strong earthquake ground motion. Bull Seism Soc Am 65(3): 581-626.
148. Utsu T (1961) A statistical study on the occurrence of aftershocks. Geophys Mag 30: 521-605.
149. Valera JE and Donovan NC (1973) Incorporation of uncertainties in the seismic response of soils. Proc. 5th World Conf Earthq Eng, Rome 1: 370-9.
150. Vere-Jones D (1970) Stochastic models for earthquake occurrence (with discussion). J Roy Stat Soc B 32 1-62.
151. Wald DJ and Heaton TH (1994) A dislocation model of the 1994 Northridge, California, earthquake determined from strong ground motions. US. Geol Surv Open-File Rept 94-278.
152. Waldron HH and Galster RW (1984) Comparative seismic hazards study of western Montana. Proc. 8th World Conf Earthq Eng, San Francisco I: 31-8.
153. Ward SN (1998) On the consistency of earthquake moment rates, geological fault data, and space geodetic strain: the United States. Geophys J Int 134: 172-86.
154. Wells D and Coppersmith K (1994) New empirical relationships among magnitude, rupture length, rupture width, rupture area and surface displacement. Bull Seis Soc Am 84: 974-1002.
155. Wyllie LA, Chamorro F, Cluff LS and Niccum MR (1977) Performance of Banco Central relating to faulting. Proc. 6th World Conf Earthq Eng, New Delhi: 2417-22.
156. Wyss M, Shimazaki K and Ito A (Eds) (1999) Special issue: Seismicity patterns: their statistical significance and physical meaning. Pure Appl Geophys 155: 203-726.
157. Youngs RR and Coppersmith KJ (1985) Implications of fault slip rates and earthquake recurrence models to probabilistic seismic hazard estimates. Bull Seism Soc Am 75: 939-64.
158. Zhao JX, Dowrick DJ and McVerry GH (1997) Attenuation of peak ground accelerations in New Zealand earthquakes. Bull NZ Nat Soc Earthq Eng 30(2): 133-58.
159. Zheng X and Vere-Jones D (1991) Application of stress-release models to historical earthquakes from North China. Pure Appl Geophys 135: 559-76.
160. Ambraseys NN (1973) Dynamics and response of foundation materials in epicentral regions of strong earthquakes. Proc. 5th World Conf on Earthq Eng, Rome 1: CXXVI-CXLVIII.
161. Ambraseys NN (1988) Engineering seismology. Earthq Eng Struc Dyn 17: 1-105.
162. Ang AH and Newmark NM (1971) Development of a transmitting boundary for numerical wave motion calculations. Report to Defence Atomic Support Agency, Contract DASA-01-0040, Washington DC.
163. ATC (1978) Tentative provisions for the development of seismic regulations for buildings. ATC 3-06, National Bureau of Standards, USA.
164. Bielak J (1975) Dynamic behaviour of structures with embedded foundations. Earthq Eng Struc Dyn 3(3): 259-74.
165. Blake RE (1961) Basic vibration theory. In Shock and Vibration Handbook. (Eds CM Harris and CE Crede), Vol. 1, McGraw-Hill, New York.
166. Blakeley RWG (1973) Prestressed concrete seismic design. Bull NZ Soc Earthq Eng 6(1): 2-21.
167. Boore DM (1973) The effect of simple topography on seismic waves: Implications for the recorded accelerations at Pacoima Dam. Bull Seis Soc Amer 63: 1603-9.
168. Borcherdt R (1994) Estimates of site-dependent response spectra for design (Methodology and justification). Earthquake Spectra 10(4): 617-53.
169. Brune JN (1984) Preliminary results on topographic seismic amplification effect on a foam rubber model of the topography near Pacoima Dam. Proc. 8th World Conf on Earthq Eng, San Francisco II: 663-70.
170. Bycroft GN (1956) Forced vibrations of a rigid circular plate on a semi-infinite elastic space and on an elastic stratum. Phil Trans Roy Soc, London, Series A 248: 327-68.
171. Carr AJ (1994) Dynamic analysis of structures. Bull NZ Nat Soc for Earthq Eng 27: 129-46.
172. Chopra AK and Goel RK (2000) Building period formulas for estimating seismic displacements. Earthq Spectra 16(2): 533-6.
173. Christafulli FJ, Carr A and Park R (2000) Analytical modelling of infilled frame structures-a general review. Bull NZ Soc for Earthq Eng 33: 30-47.
174. Clough RW and Penzien J (1993) Dynamics of Structures. 2nd Edn, McGraw-Hill, New York.
175. Danay A (1977) Vibrations of rigid foundations. The Arup Jnl, London 12(1): 19-27.
176. Dobry R and Vucetic M (1987) Dynamic properties and seismic response of soft clay deposits. Proc. Int Symp on Geotech Eng of Soft Soils, Mexico City 2: 51-87.
177. Dowrick DJ (1985) Preliminary field observations on the Chilean earthquake of 3 March, 1985. Bull NZ Nat Soc for Earthq Eng 18(2): 119-27.
178. Elnashai AS (2002) Do we really need inelastic dynamic analysis? J Earthq Eng 6(Special Issue 1): 123-30.
179. Gazetas G and Dobry R (1984) Simple radiation damping model for piles and footings. J Eng Mech 110(6): 937-56.
180. Geli L, Bard P-Y and Jullien B (1988) The effect of topography on earthquake ground motion:A review and new results. Bull Seis Soc Amer 78: 42-63.
181. Goel RK and Chopra AK (1998) Period formulas for concrete shear wall buildings. J Struc Eng 124(4): 426-33.
182. Hart GC and Vasudevan R (1975) Earthquake design of buildings: damping. J Struc Divn 101(ST1): 11-30.
183. Housner GW and Jennings PC (1977) The capacity of extreme earthquake motions to damage structures. In Structural and Geotechnical Mechanics-A Volume Honoring NM Newmark. (Ed. WJ Hall), Prentice-Hall, Englewood Cliffs, New Jersey, 112-16.
184. Ishibashi I (1992) Discussion to: Effect of soil plasticity on cyclic response, by M Vucetic and R Dobry (1991), J Geotech Eng 118: 830-832.
185. Kausel E (1974) Forced vibrations of circular foundations on layered media. Research Report R74-11, Dept of Civil Eng, Massachusetts Institute of Technology.
186. Kausel E (1976) Nonlinear behaviour of soil-structure interaction. J Geotech Eng Divn 102(GT11): 1159-70.
187. Kramer SL (1996) Geotechnical Earthquake Engineering. Prentice Hall, New Jersey.
188. Kramer SL and AW Elgamal (2001) Modeling soil liquefaction hazards for performance-based earthquake engineering. Pacific Center for Earthq Eng Report PEER 2001/13, Berkeley, California.
189. Lai SSP and Biggs JM (1980) Inelastic response spectra for aseismic building design. J Struc Divn 106(ST6): 1295-1310.
190. Lam N and Wilson J (1999) Estimation of site natural period from a borehole record. Australian J Struc Eng SEI(3): 179-99.
191. Lamar S and Fortoul C (1969) Brick masonry effect in vibration of frames. Proc. 4th World Conf Earthq Eng, Chile II(A3): 91-8.
192. Liao SSC, Veneziano D and Whitman RV (1988) Regression models for evaluating liquefaction probability. J Geotech Eng 114: 389-411.
193. Luco JE (1974) Impedance functions for a rigid foundation on a layered medium. Nuclear Eng and Design 31(2): 204-17.
194. Luco JE and Westmann RA (1971) Dynamic response of circular footings. J Eng Mechanics Divn 97: 1381-95.
195. Luco JE, Wong HL and Trifunac MD (1975) A note on dynamic response of rigid embedded foundations. Earthq Eng Struc Dyn 4(2): 119-27.
196. Lysmer J and Kuhlemeyer RL (1969) Finite dynamic model for infinite media. J Eng Mech Divn 95(EM4): 859-77.
197. McVerry GH, Hodder SB, Hefford RT and Heine AJ (1984) Records of engineering significance from the New Zealand strong-motion network. Proc. 8th World Conf on Earthq Eng, San Francisco II: 199-206.
198. Moss PW, Carr AJ and Buchanan AH (1986) Seismic design loads for low-rise steel buildings. Proc. Pacific Struc Steel Conf, Auckland 1: 149-65.
199. Mylonakis G and Gazetas G (2000) Seismic soil-structure interaction: beneficial or detrimental? J Earthq Eng 4: 277-302.
200. Newmark NM and Hall WJ (1973) Rational approach to seismic design standard for structures. Proc. 5th World Conf Earthq Eng, Rome 2: 2266-75.
201. Newmark NM and Rosenblueth E (1971) Fundamentals of Earthquake Engineering. Prentice-Hall, Englewood Cliffs, New Jersey.
202. Park R, Kent DC and Sampson RA (1972) Reinforced concrete members with cyclic loading. J Struc Divn 98(ST7): 1341-60.
203. Penzien J and Tseng WS (1976) Seismic analysis of gravity platforms under soil-structure interaction effects. Proc. Offshore Technology Conference, Houston, Texas, Paper No 2674.
204. Poulos HG and Davis EH (1974) Elastic Solutions for Soil and Rock Mechanics. John Wiley & Sons, New York.
205. Roesset JM (1972) Fundamentals of soil amplification. In Seismic Design of Nuclear Reactors. (Ed. RJ Hansen), MIT Press, 183-244.
206. Schnabel PB, Seed HB and Lysmer J (1971) Modification of seismograph records for effects of local soil conditions. Report No EERC 71-8, Earthq Eng Research Center, University of California, Berkeley.
207. SEAOC (1980) Recommended lateral force requirements and commentary. Structural Engineers Association of California.
208. Seed HB (1975) Earthquakes effects of soil-foundation systems. In Foundation Engineering Handbook. (Eds HF Winterborn and HY Fang), Van Nostrand Reinhold Company, New York, 700-32.
209. Seed HB and Idriss IM (1969) Influence of soil conditions on ground motions during earthquakes. J Soil Mech and Found Divn 95(SM1): 99-137.
210. Seed HB and Idriss IM (1970) Soil moduli and damping factors for dynamic response analysis. Report No EERC 70-10, Earthq Eng Research Center, University of California, Berkeley.
211. Seed HB and Romo MP (1986) Analytical modelling of dynamic soil response. Proc. Int Conf on the 1985 Mexico Earthquakes. Mexico City, American Soc Civil Engineers.
212. Seed HB, Whitman RV, Dezfulian H, Dobry R and Idriss IM (1972) Soil conditions and building damage in 1967 Caracas earthquake. J Soil Mech and Found Divn 98(SM8): 787-806.
213. Seed HB,Wong RT, Idriss IM and Tokimatsu K (1984) Moduli and damping factors for dynamic analyses of cohesionless soils. Report No UCB/EERC-84/14, Earthq Eng Research Center, University of California, Berkeley.
214. Seed HB,Wong RT, Idriss IM and Tokimatsu K (1986) Moduli and damping factors for dynamic analyses of cohesionless soils. J Geotech Eng 112: 1016-1032.
215. Silver ML and Seed HB (1969) The behaviour of sands under seismic loading conditions. Report No EERC 69-16, Earthq Eng Research Center, University of California, Berkeley.
216. Sinha BP, Gerstle KH and Tulin LG (1964) Stress-strain relationships for concrete under cyclic loading. J Amer Conc Inst 61(2): 195-211.
217. Smith IC, Spring KCF and Sidwell GK (1975) The design and construction of the Bank of New Zealand, Wellington, New Zealand. Bull NZ Nat Soc for Earthq Eng 8(2): 142-168.
218. Sritharan S and Dowrick DJ (1994) Response of low-rise buildings to moderate ground shaking, particularly the May 1990 Weber earthquake. Bull NZ Nat Soc Earthq Eng 27(3): 205-21.
219. Stratta JL and Feldman J (1971) Interaction of infill walls and concrete frames during earthquakes. Bull Seis Soc Amer 61(3): 609-12.
220. Sugimara Y and Ohkawa I (1984) Seismic microzonation of Tokyo area. Proc. 8th World Conf on Earthq Eng, San Francisco II: 721-8.
221. Takanashi K (1973) Inelastic lateral buckling of steel beams subjected to repeated and reversed loadings. Proc. 5th World Conf Earthq Eng, Rome 1: 795-8.
222. Tang DT and Clough RW (1979) Shaking table earthquake response of steel frames. J Struc Divn 105(ST1): 221-43.
223. Tani K (1995) General report: Measurement of shear deformation of geomaterials-Field tests. Proc. Int Symp Pre-Failure Def Charac Geomaterials, Sapporo 2: 1115-35.
224. Tazoh T, Nakahi S, Shimizu K and Yokata H (1984) Vibration characteristics of soil and their applicability to the field. Proc. 8th World Conf on Earthq Eng, San Francisco II: 679-86.
225. Thompson KJ and Park R (1978) Stress-strain model for prestressing steel with cyclic loading. Bull NZ Nat Soc Earthq Eng 11(4): 209-18.
226. Vaish AK and Chopra AK (1974) Earthquake finite element analysis of structure-foundation systems. J Eng Mechanics Divn 100(EM6): 1101-16.
227. Valera JE and Donovan NC (1973) Incorporation of uncertainties in the seismic response of soils. Proc. 5th World Conf on Earthq Eng, Rome 1: 370-79.
228. Veletsos AS and Meek JW (1974) Dynamic behaviour of building-foundation systems. Earthq Eng Struc Dyn 3(2): 121-38.
229. Veletsos AS and Nair VVD (1975) Seismic interaction of structures on hysteretic foundations. J Struc Divn 101(ST1): 109-29.
230. Veletsos AS and Verbic B (1973) Vibration of viscoelastic foundations. Earthq Eng Struc Dyn 2(1): 87-102.
231. Veletsos AS and Wei YT (1971) Lateral and rocking vibrations of footings. J Soil Mech and Found Divn 97(SM9): 1227-48.
232. Vucetic M and Dobry R (1991) Effect of soil plasticity on cyclic response. J Geotech Eng 117(1): 89-107.
233. Watt BJ, Boaz IB and Dowrick DJ (1976) Response of concrete gravity platforms to earthquake excitations. Proc. Offshore Tech Conf, Houston, Texas, Paper No 2673.
234. Watt BJ, Boaz IB, Ruhl JA, Shipley SA, Dowrick DJ and Ghose A (1978) Earthquake survivability of concrete platforms. Proc. Offshore Techn Conf, Houston, Texas, Paper No 3159, 957-73.
235. Werkle H and Waas G (1986) Dynamic stiffness of foundations in inhomogeneous soils. Proc. 8th Euro Conf Earthq Eng, Lisbon.
236. Whitman RV and Richart FE (1967) Design procedures for dynamically loaded foundations. J Soil Mech and Found Divn 93(SM6): 169-91.
237. Whitman RV, Roesset JM, Dobry R and Ayestaran L (1972) Accuracy of modal superposition for one-dimensional soil amplification analysis. Proc. Int Conf on Microzonation, Seattle 2:483-98.
238. Williams D and Scrivener JE (1973) Response of reinforced masonry shear walls to static and dynamic cyclic loading. Proc. 5th World Conf Earthq Eng, Rome 2: 1491-4.
239. Wilson EL, Der Kiureghian A and Bayo EP (1981) A replacement for the SSRS method in seismic analysis. Earthq Eng Struct Dyn 9: 187-94.
240. Wolf JP (1985) Dynamic Soil-Structure Interaction. Prentice-Hall, Englewood Cliffs, New Jersey.
241. Wolf JP (1988) Soil-Structure-Interaction in the Time Domain. Prentice-Hall, Englewood Cliffs, New Jersey.
242. Wolf JP and Song C (1996) Finite-Element Modelling of Unbounded Media. John Wiley & Sons, Chichester.
243. Wolf JP and Song C (1999) The guts of soil-structure interaction. International Symposium on Earthquake Engineering. Budva, Montenegro.
244. Yasuda S, Nagase H, Oda S, Masuda T and Morimoto I (1994) A study of appropriate number of cyclic shear tests for seismic response analyses. Proc. Int Symp Pre-Failure Def Charac Geomaterials Sapporo 1: 197-202.
245. Youd TL (1991) Mapping of earthquake-induced liquefaction for seismic zonation. Eeri, Stanford University 1: 111-147.
246. Zaslavsky Y and Shapira A (2000) Experimental study of topographic amplification using the Israel seismic network. J Earthq Eng 4: 43-65.
247. Zhao Z (1990) Seismic soil-structure interaction. PhD Thesis, Dept of Civil Engineering, University of Canterbury, New Zealand.
248. Dowrick DJ (1991) Damage costs for houses and farms as a function of intensity in the 1987 Edgecumbe earthquake. Earthq Eng and Struc Dyn 20: 455-69.
249. Dowrick DJ (1996) The Modified Mercalli earthquake intensity scale-Revisions arising from recent studies of New Zealand earthquakes. Bull NZ Nat Soc Earthq Eng 29(2): 92-106.
250. Dowrick DJ (1998) Earthquake risk for property and people in New Zealand. Proc. NZ Nat Soc Earthq Eng Tech Conf, Wairakei, 43-50.
251. Dowrick DJ (2003) Earthquake risk reduction actions for New Zealand. Bull NZ Soc Earthq Eng (submitted).
252. Dowrick DJ and Rhoades DA (1993) Damage costs for commercial and industrial property as a function of intensity in the 1987 Edgecumbe earthquake. Earthq Eng and Struc Dyn 22:869-84.
253. Dowrick DJ and Rhoades DA (1995) Damage ratios for plant, equipment and stock in the 1987 Edgecumbe, New Zealand earthquake. Bull NZ Nat Soc Earthq Eng 28(4): 265-78.
254. Dowrick DJ and Rhoades DA (1997a) Inferences for design, insurance and planning from damage evaluation in past New Zealand earthquakes. J Earthq Eng 1(1): 77-91.
255. Dowrick DJ and Rhoades DA (1997b) Vulnerability of different classes of low-rise buildings in the 1987 Edgecumbe, New Zealand, earthquake. Bull NZ Nat Soc Earthq Eng 30(3): 227-41.
256. Dowrick DJ and Rhoades DA (1999) Attenuation of Modified Mercalli intensity in New Zealand earthquakes. Bull NZ Soc Earthq Eng 35(2): 55-89.
257. Dowrick DJ and Rhoades DA (2002) Damage ratios for low-rise non-domestic brick buildings in the magnitude 7.1 Wairarapa, New Zealand, earthquake of 24 June 1942. Bull NZ Soc Earthq Eng 35(3): 135-48.
258. Dowrick DJ and Rhoades DA (2003) Risk of casualties in New Zealand earthquakes. Proc. 7th Pacific Conf on Earthq Eng, Christchurch (CD Rom).
259. Dowrick DJ, Rhoades DA and Davenport PN (2001) Damage ratios for domestic property in the magnitude 7.2 1968 Inangahua, New Zealand, earthquake. Bull NZ Soc Earthq Eng 34(3): 191-213.
260. Dowrick DJ, Rhoades DA and Davenport PN (2003) Effects of microzoning and foundations on damage ratios for domestic property in the magnitude 7.2 1968 Inangahua, New Zealand, earthquake. Bull NZ Soc for Earthq Eng 36(1): 25-46.
261. Dowrick DJ, Rhoades DA, Babor J and Beetham RD (1995) Damage ratios and microzoning effects for houses in Napier at the centre of the magnitude 7.8 Hawke's Bay, New Zealand, earthquake of 1931. Bull NZ Nat Soc Earthq Eng 28(2): 134-45.
262. Idriss IM (1990) Response of soft soil sites during earthquakes. Proc. H Bolton Seed Memorial Symp, Berkeley, 273-89.
263. Kircher CA, Nassar AA, Kustu O and Holmes WT (1997a) Development of building damage functions for earthquake loss estimation. Earthq Spectra 13: 663-82.
264. Kircher CA, Reitherman RK, Whitman RV and Arnold C (1997b) Estimation of earthquake losses to buildings. Earthq Spectra 13: 703-20.
265. McGuire RK and Toro GR (2000) Models of residential loss based on non-linear instrumental ground motion. Paper 1141, Proc. 12th World Conf Earthq Eng, Auckland NZGS 85, NZ Geol Surv, Dept Scientific and Indust Res, New Zealand.
266. Park R and others (1995) The Hyogo-ken Nanbu earthquake of 17 January 1995. Bull NZ Nat Soc Earthq Eng 28(1): 1-98.
267. Rhoades DA and Dowrick DJ (1999) Variability of damage ratios for property in earthquakes. Earthq Spectra 15(2): 297-316.
268. Steinbrugge KV (1982) Earthquakes, Volcanoes, and Tsunamis-an Anatomy of Hazards. Skandia America Group, New York.
269. Steinbrugge KV and Algermissen ST (1990) Earthquake losses to single-family dwellings: California experience. US Geol Surv Bull 1939, US Govt Printing Office.
270. Suggate RP and Wood PR (1979) Inangahua earthquake-damage to houses. Report.
271. Van de Vorstenbosch G, Charleson AW and Dowrick DJ (2002). Performance of reinforced concrete buildings in the 1931 Hawke's Bay, New Zealand, earthquake. Bull NZ Soc Earthq Eng 35(3): 149-64.
272. Whitman RV, Anagnos T, Kircher CA, Lagorio HJ, Lawson RS and Schneider P (1997) Development of a national earthquake loss estimation methodology. Earthq Spectra 13(4): 643-61.
273. Cardona DM (1999) Multidisciplinary Risk Mitigation Project of Bogota, Columbia. Paper prepared for Earthquakes and Megacities Initiative (EMI) Twin Cities Meeting, Seeheim, Germany, March 14-16.
274. Coburn A and Spence R (1992) Earthquake Protection. John Wiley & Sons, Chichester.
275. Cousins WJ, Heron D, Jensen S, Kozuch M and Savage J (2000) Integrated and Interactive Risk Assessment Platform for Wellington, New Zealand. Paper No. 1624, Proc. 12th World Conference on Earthquake Eng, Auckland.
276. Dowrick DJ and Rhoades DA (1999) Attenuation of Modified Mercalli Intensity in New Zealand earthquakes. Bull N Z Soc Earthquake Eng 32(2): 55-89.
277. Dowrick DJ, Cousins WJ and Sritharan S (1990) Report on Potential Losses to the EQC due to fire following large earthquakes in Central New Zealand. Report for Marsh & McLennan Ltd for Treasury, DSIR Physical Sciences, DSIR, Lower Hutt.
278. Durkin ME (1996) Casualties patterns in the 1994 Northridge, California Earthquake. Eleventh World Conference on Earthquake Engineering. Paper No. 979, Elsevier.
279. EERI (2000) Financial Management of Earthquake Risk. EERI Endowment Fund White Paper. Earthquake Engineering Research Institute, Oakland, California.
280. Fawcett BA (1988) The Insurance of Profits. Robins MBS (NZ) Ltd, Auckland.
281. FEMA 313 (1998) Promoting the Adoption and Enforcement of Seismic Building Codes: A Guidebook for State Earthquake and Mitigation Managers. Federal Emergency Management Agency, USA.
282. Fernandez J and Yepes H (1997) Knowledge and Technology Transfer: Improving the Urban Seismic Risk Management in Quito-Ecuador. First International Earthquakes and Megacities Workshop, Seeheim, Germany, Release II, The United Nations University: 295-300.
283. Haimes YY (1998) Risk Modelling, Assessment and Management. John Wiley & Son, New York.
284. HAZUS (1999) Earthquake Loss Estimation. Technical Manual. National Institute of Building Sciences, Washington DC.
285. Jones BG (editor) (2000) Economic Consequences of Earthquakes: Preparing for the Unexpected. NCEER-SP-0001. National Center for Earthquake Engineering Research, Buffalo, New York.
286. Killip RE (2001) "Fell It Like It Is": How to Communicate Your Future Vision for Earthquake Engineering to Clients and Building Owners. Paper No. 7.03.01, Proc. Tech Conf of New Zealand Earthquake Engineering, Wairakei, New Zealand.
287. Kiremidjian AS, Moore J, Fan Y, Hortacsu A, Burnell K and Legnie J (2001) Earthquake Risk Assessment for Transportation Systems: Analysis of pre-retrofitted System. PEER Center News 4(1): 1-5.
288. Mattingly S (2000) Advances in Seismic Risk Management in Developing Countries. Paper No. 2829. Proc. 12th World Conf on Earthq Eng, Auckland.
289. May PJ and Feeley TJ (1999) Earthquake Risk Reduction in the Western United States. PEER Center News 2(4): 7-9.
290. Okasaki K (1997) RADIUS-A Seismic Risk Assessment Project for IDNDR. First International Earthquakes and Megacities Workshop, Seeheim, Germany, Release II, The United Nations University: 319-328.
291. Ordaz M, Miranda E Reinose E and Perez-Rocha LE (2000) Seismic Loss Estimation for Mexico City. Paper No. 1902, Proc. 12th World Conference on Earth Eng, Auckland.
292. Scawthorn C (1987) Fire Following Earthquake: Estimates of the Conflagration risk to insured party in greater Los Angeles and San Francisco. All Industry Research Council, Oak Brook, Illinois.
293. Smith WD and Cousins WJ (2002) Effective ways to model earthquake risk. Technical Conf of the Soc for Earthq Eng, Napier, Paper No 2.2.
294. Smolka A (2000) Earthquake Research and the Insurance Industry. New Zealand Geophysical Society Newsletter, No. 55: 22-5.
295. Spence RJS, Pomonis A, Dowrick DJ and Cousins WJ(1998) Estimating Human Casualties in Earthquakes: The Case of Wellington. In Seismic Design Practice into the Next Century. Booth E (ed.), Balkema, Rotterdam, 277-286.
296. Tsai Y-B, Yu T-M, Chao H-L and Lee chien-ping (2001) Spatial distribution and age dependence of human-fatality rates from the Chi-Chi, Taiwan, earthquake of 21 September 1999. Bull Seism Soc Am 91: 1298-309
297. Walker GR (1997) Prediction of Insurance Loss from Earthquakes. Bull NZ Nat Soc Earthq Eng 30(1): 40-45.
298. Woo G (1999) The Mathematics of Natural Catastrophes. Imperial College Press, London.
299. Amin NR and Louie JJC (1984) Design of multiple framed tube high rise steel structures in seismic regions. Proc. 8th World Conf Earthq Eng, San Francisco V: 347-54.
300. Applied Technology Council (1982) An investigation of the correlation between earthquake ground motion and building performance ATC-10, Berkeley, California.
301. Arnold C and Reitherman R (1982) Building Configuration and Seismic Design. John Wiley & Sons, New York.
302. Beck JL and Skinner RI (1974) The seismic response of a reinforced concrete bridge pier designed to step. Earthq Eng Struc Dyn 2: 343-58.
303. Boardman PR, Wood BJ and Carr AJ (1983) Union House-cross braced structure with energy dissipators. Bull NZ Nat Soc Earthq Eng 16(2): 83-97.
304. Buckle, IG (2000) Passive control of structures for seismic loads. Bull NZ Soc Earthq Eng 33:209-21.
305. Charleson AW and Taylor M (2000) Towards an earthquake architecture. Paper 858, Proc. 12th World Conf Earthq Eng, Auckland.
306. Charleson AW, Wright PD and Skinner RI (1987) Wellington Central Police Station, base isolation of an essential facility. Proc. Pacific Conf Earthq Eng, New Zealand 2: 378-88.
307. Clifton GC, Butterworth JW and Pantke M (2001) Proc. Tech Conf NZ Soc Earthq Eng, Wairakei, Paper No 4.13.01.
308. Dowrick, DJ (1977) Structural form for earthquake resistance. Proc. 6th World Conf Earthq Eng, New Delhi 2: 1826-33.
309. Dowrick DJ (1985) Preliminary field observations of the Chilean earthquake of 3 March 1985. Bull NZ Nat Soc Earthq Eng 18(2): 119-27.
310. Dowrick DJ and Rhoades DA (2000) Earthquake damage and risk experience and modelling in New Zealand. Proc. 12th World Conf Earth Eng, Auckland.
311. FEMA (1997) NEHRP guidelines for the seismic rehabilitation of buildings. Federal Emergency Management Agency, Report FEMA-273, Washington, DC.
312. Flores R (1969) An outline of earthquake protection criteria for a developing country. Proc. 4th World Conf Earthq Eng, Chile III J4: 1-14.
313. Ghoubhir ML (1984) Earthquake resistance of structural systems for tall buildings. Proc. 8th World Conf Earthq Eng, San Francisco V: 491-8.
314. Giuliani H (2000) Seismic resistant architecture: a theory for the architectural design of buildings in seismic design. Proc. 12th World Conf Earthq Eng, Auckland, Paper No 2456.
315. Hanson RD and Soong TT (2001) Seismic design with supplemental energy dissipating devices. Earthquake Engineering Research Institute, Oakland, California.
316. He Guangquian, Wei Lian, Zhong Yicun and Dai Guoying (1984) New procedure for aseismic design of multi-storey shear type building based upon deformation checking. Proc. 8th World Conf Earthq Eng, San Francisco V: 483-90.
317. Hoover CA and Greene MR (1996) Construction quality, education and seismic safety. EERI Publication EF 96-02, Earthquake Engineering Research Institute, Oakland, California.
318. Kelly JM, Skinner RI and Heine AJ (1972) Mechanisms of energy absorption in special devices for use in earthquake resistant structures. Bull NZ Nat Soc Earthq Eng 5(3): 63-88.
319. Leyendecker EV, Hunt RJ, Frankel AD and Ruckstales KS (2000) Development of maximum considered earthquake ground motion maps. Earthq Spectra 16: 21-40.
320. Mayes RL, Jones LR, Kelly TE and Button MR (1984) Design guidelines for base-isolated buildings with energy dissipators. Earthq Spectra 1(1): 41-74.
321. Meek JL (1975) Effects of foundation tipping on dynamic response. J Struc Divn 101(ST7):1297-311.
322. Megget LM (1978) Analysis and design of a base-isolated reinforced concrete frame building. Bull NZ Nat Soc Earthq Eng 11(4): 245-54.
323. Monti MD, Zhao JX, Gannon CR and Robinson WH (1998) Experimental results and dynamic parameters for the Penguin Vibration Damper (PVD) for wind and earthquake loading. Bull NZ Nat Soc Earthq Eng 31: 177-93.
324. Pall AS and Marsh C (1982) Response of friction damped braced frames. J StrucDivn 108(ST6):1313-23.
325. Park R et al. (1995) The Hyogo-ken Nanbu earthquake of 17 January 1995. Bull NZ Nat Soc Earthq Eng 28: 1-98.
326. Paulay T (1979) Capacity design of earthquake resisting ductile multi-storey reinforced concrete frames. Proc. 3rd Canadian Conf Earthq Eng, Montreal 2: 917-48.
327. Priestley MJN and Kowalsky MJ (2000) Direct displacement-based seismic design of concrete buildings. Bull NZ Nat Soc Earthq Eng 33: 421-44.
328. Restrepo JI, Mander J and Holden TJ (2001) New generation of structural systems for earthquake resistance. Proc. Tech Conf NZ Soc Earthq Eng, Wairakei, Paper No 7.04.01.
329. Robinson WH (1998) Passive control of structures, the New Zealand experience. ISET J Earthq Technology 35: 63-75.
330. Robinson WH (2000) Two developments in seismic isolation-A 'centre drive' and 'friction ball'. Proc. 12th World Conf Earthq Eng, Auckland, Paper No 1178.
331. Robinson WH and Tucker AG (1977) A lead-rubber shear damper. Bull NZ Nat Soc Earthq Eng 10(3): 151-3.
332. Scawthorn C, Celebi M and Prince J (1986) Performance characteristics of structures, 1985 Mexico City earthquake. In The Mexico Earthquakes-1985-Factors Involved and Lessons Learned. ASCE, 217-32.
333. Sharpe RD and Carr AJ (1975) The seismic resistance of inelastic structures. Bull NZ Nat Soc Earthq Eng 8(3): 192-203.
334. Sharpe RD and Skinner RI (1983) The seismic design of an industrial chimney with rocking base. Bull NZ Nat Soc Earthq Eng 16(2): 98-106.
335. Skinner RI, Robinson WH and McVerry GH (1993) An introduction to seismic isolation. (Updated and Modified in Chinese and Japanese.) (1998) John Wiley & Sons, Chichester, UK.
336. Skinner RI, Taylor RG and Robinson WH (1980) Hysteretic dampers for protection of structures from earthquakes. Bull NZ Nat Soc Earthq Eng 13(1): 22-36.
337. Sritharan S and Dowrick DJ (1994) Response of low-rise buildings to moderate earthquake shaking, particularly the May 1990 Weber earthquake. Bull NZ Nat Soc Earthq Eng 27(3): 205-21.
338. Stratta JL and Feldman J (1971) Interaction of infill walls and concrete frames during earthquakes. Bull Seis Soc Amer 61(3): 609-12.
339. Tyler RG and Robinson WH (1984) High strain tests on lead-rubber bearings for earthquake loadings. Bull NZ Nat Soc Earthq Eng 17(2): 90-105.
340. UNAM (1985) Efectos de los sismos de Sept de 1985 en las Constructtiones de la Ciudad de Mexico. Aspectos Estructurales, Segundo informe del Inst de Ing de la Univ Nac Auton de Mexico.
341. Van de Vorstenbosch G, Charleson AW and Dowrick D (2002) Performance of reinforced concrete buildings in the 1931 Hawke's Bay, New Zealand, earthquake. Bull NZ Nat Soc Earthq Eng 35: 149-64.
342. Wada A, Shinozaki Y and Nakamura N (1984) Collapse of building with expansion joints through collision caused by earthquake motion. Proc. 8th World Conf Earthq Eng, San Francisco IV: 855-62.
343. Berrill J and Yasuda S (2002) Liquefaction and piled foundations: Some issues. Jnl Earthq Eng 6 (Special Issue): 1-41.
344. Blaney GW, Kausel E and Roesset JM (1976) Dynamic stiffness of piles. 2nd Int Conf on Numerical Methods in Geomech, Blacksburg, USA, ASCE.
345. Broms BB (1964a) Lateral resistance of piles in cohesive soils. Proc. ASCE, J Soil Mech and Found Div 90(SM2): 27-63.
346. Broms BB (1964b) Lateral resistance of piles in cohesionless soils. Proc. ASCE, J Soil Mech and Found Div 90(SM3): 123-56.
347. Budhu M and Davies TG (1987) Nonlinear analysis of laterally loaded piles in cohesionless soils. Canadian Geotech Jnl 24: 286-96.
348. Budhu M and Davies TG (1988) Analysis of laterally loaded piles in soft clays. Proc. ASCE, J Geotech Eng 114(1): 21-39.
349. Davies TG and Budhu M (1986) Nonlinear analysis of laterally loaded piles in heavily overconsolidated clays. Geotechnique 36(4): 527-38.
350. Gazetas G and Dobry R (1984) Simple radiation damping model for piles and footings. J Eng Mech 110(6): 937-56.
351. Iai S, Noda S and Tsuchida H (1988) Basic considerations for designing the area of the ground compaction as a remedial measure against liquefaction. Proc. US-Japan Joint Workshop on Remedial Measures for Liquefiable Soils.
352. Ishihara K, Koyamachi N and Kasuda K (1974) Strength of cohesive soil in irregular loading. Proc. 8th World Conf on Earthq Eng, San Francisco III: 7-14.
353. Kishida H (1967) Ultimate bearing capacity of piles driven in loose sand. Soils and Found 7(3): 20-29.
354. Kramer SL (1996) Geotechnical Earthquake Engineering. Prentice Hall, New Jersey.
355. Mathewson MB, Wood JH and Berrill JB (1980) Earth retaining structures. Bull NZ Nat Soc for Earthq Eng 13(3): 280-93.
356. Mononobe N (1929) Earthquake-proof construction of masonry dams. Proc. World Eng Conf 9:275.
357. NAVFAC (1982) Foundations and Earth Structures. Design Manual 7.2. Naval Facilities Engineering Command, Department of the Navy, Alexandra, Virginia, USA.
358. Nishizawa T, Tajiri S and Kawamura S (1984) Excavation and response analysis of damaged rc piles by liquefaction. Proc. 8th World Conf on Earthq Eng, San Francisco III: 593-600.
359. NZMOW (1970) Design of Public Buildings. Code of Practice PW 81/10/1, New Zealand Ministry of Works.
360. Ohsaki Y (1970) Effects of sand compaction on liquefaction during the Tokachioki earthquake. Soils and Found 10(2): 112-28.
361. Okabe S (1926) General theory of earth pressures. J Jap Soc of Civil Engrs 12(1).
362. Pender MJ (1993) Aseismic pile foundation design analysis. Bull NZ Nat Soc Earthq Eng 26(1): 49-160.
363. Pender MJ (1996) Earthquake resistant design of foundations. Bull NZ Nat Soc Earthq Eng 29(3): 155-71.
364. Penzien J (1970) Soil-pile foundation interaction. In Earthquake Engineering. (Ed. RL Wiegel). Prentice-Hall, Englewood Cliffs, NJ, 349-81.
365. Poulos HG and Davis EH (1980) Pile Foundation Analysis and Design. John Wiley & Sons, New York.
366. Richards R and Elms DG (1979) Seismic behaviour of gravity retaining walls. J Geot Eng Div 105(GT4): 449-64.
367. Seed HB (1960) Soil strength during earthquakes. Proc. 2nd World Conf on Earthq Eng, Tokyo, 1: 183-94.
368. Seed HB and Booker JR (1977) Stabilization of potentially liquefiable sand deposits using gravel drains. J Geot Eng Div 103(GT7): 757-68.
369. Seed HB and Whitman RV (1970) Design of earth retaining structures for dynamic loads. ASCE Specialty Conf on Lateral Stresses and the Design of Earth Ret Struc, New York 103-18.
370. Solymar ZV and Reed DJ (1986) A comparison of foundation compaction techniques. Can Geotech Jnl 23(3): 271-80.
371. Taylor PW and Williams RL (1979) Foundations for capacity designed structures. Bull NZ Nat Soc for Earthq Eng 12(2): 101-113.
372. Whitman RV and Liao S (1984) Seismic design of gravity retaining walls. Proc 8th World Conf on Earthq Eng, San Francisco III: 533-40.
373. Wyllie LA, McClure FE and Degenkolb HJ (1973) Performance of underground structures at the Joseph Jensen filtration plant. Proc. 5th World Conf on Earthq Eng, Rome 1: 66-73.
374. Zeevaert L (1983) Foundation Engineering for Difficult Sub-Soil Conditions. Van Nostrand Reinhold, New York (2nd edn).
375. Amrhein JE (1994) Reinforced Masonry Engineering Handbook. The Masonry Institute of America, Los Angeles (5th edition).
376. Asteneh-Asl A, Goel SC and Hanson RD (1984) Cyclic behaviour of double angle bracing members with bolted connections. Proc. 8th World Conf on Earthq Eng, San Francisco VI:249-56.
377. ATC-7 (1981) Guidelines for the Design of Horizontal Wood Diaphragms. Applied Technology Council, California.
378. Bertero VV and Popov EP (1985) Effect of large alternating strains on steel beams. J Struc Div 91(ST1): 1-12.
379. Bertero VV, Anderson JC and Krawinkler H (1994) Performance of steel structures during the Northridge earthquake. Report No. UCB/EERC-94/09, Earthq Eng Res Center, Univ of Calif, Berkeley.
380. Bertero VV, Popov EP, Wang TY and Vallenas J (1977) Seismic design implications of hysteretic behaviour of reinforced concrete structural walls. Proc. 6th World Conf on Earthq Eng, New Delhi 5: 159-65.
381. Blakeley RWG (1973) Prestressed concrete seismic design. Bull Nat Soc for Earthq Eng 6(2): 2-21.
382. Blakeley RWG and Park R (1971) Ductility of prestressed concrete members. Bull NZ Nat Soc for Earthq Eng. 4(1): 145-70.
383. Blume JA, Newmark NM and Corning LH (1961) Design of Multi-Storey Reinforced Concrete Buildings for Earthquake Motions. Postland Cement Association Skokie, Illinois.
384. Buchanan AH (1984a) Strength model and design methods for bending and axial board interaction in timber members. PhD thesis, Dept of Civil Engineering, University of British Columbia.
385. Buchanan AH (1984b) Wood properties and seismic design of timber structures. Proc. Pacific Timber Eng Conf, Auckland II: 462-9.
386. Buchanan AH (2001) Structural Design for Fire Safety. John Wiley & Sons, Chichester, UK.
387. Buchanan AH (ed) (1999) Timber Design Guide. NZ Timber Industry Federation.
388. Buchanan AH and Fairweather RH (1993) Seismic design of glulam structures. Bull NZ Nat Soc for Earthq Eng 26(4): 415-36.
389. Buchanan A, Moss P and Wong N (2001) Ductile moment-resisting connections in glulam beams. Technical Conf NZ Soc for Earthq Eng, Wairakei, Paper No. 6.02.01.
390. Cardenas AE, Hanson JM, Corley WG and Hognestad E (1973) Design provisions for structural walls. AcI J 70(3): 221-30.
391. CCANZ (1995) New Zealand Reinforced Concrete Design Handbook. Cement and Concrete Association of New Zealand, Porirua.
392. Chopra AK and Goel AK (1999) Capacity-demand-diagram methods for estimating seismic deformation of inelastic structures: SDF systems. Report No PEER-1999/02, Pacific Earthquake Engineering Research Center, University of California, Berkeley.
393. Chopra AK and Goel RK (2001) Direct displacement-based design: Use of inelastic vs. elastic design spectra. Earthq Spectra 17(1): 47-64.
394. Clifton GC (1985) Composite design. Bull NZ Nat Soc for Earthq Eng 18(4): 381-96.
395. Clough DP (1984) Development of seismic design criteria for connections in jointed precast prestressed structures. Proc. 8th World Conf on Earthq Eng, San Francisco V: 645-52.
396. Coe FR (1973) Welding Steels without Hydrogen Cracking. The Welding Institute, Cambridge.
397. Cooney RC (1979) The structural performance of houses in earthquakes. Bull NZ Nat Soc for Earthq Eng 12(3): 223-37.
398. Corley WG (1966) Rotational capacity of reinforced concrete beams. J Struct Divn 92(ST5):121-46.
399. Dean JA, Moss PJ and Stewart W (1984) A design procedure for rectangular openings in shear walls and diaphragms. Proc. Pacific Timber Eng Conf, Auckland II: 513-8.
400. Dean JA, Stewart WG and Carr AJ (1986) The seismic behaviour of plywood sheathed shearwalls. Bull NZ Nat Soc for Earthq Eng 19(1): 48-63.
401. Dowrick DJ (1986) Hysteresis loops for timber structures. Bull NZ Nat Soc for Earthq Eng 19(2): 143-52.
402. Dowrick DJ and Rhoades DA (1997) Vulnerability of different classes of low-rise buildings in the 1987 Edgecumbe, New Zealand, earthquake. Bull NZ Nat Soc for Earthq Eng 30(3): 227-41.
403. Dowrick DJ and Smith PC (1986) Timber sheathed walls for wind and earthquake resistance. Bull NZ Nat Soc for Earthq Eng 19(2): 123-34.
404. EERL (1973) Engineering features of the San Fernando earthquake. Bull NZ Nat Soc for Earthq Eng 6(1): 22-45.
405. Erasmus L (1984) The mechanical properties of structural steel sections and the relevance of those properties to the capacity design of structures. Trans Inst of Prof Engineers, New Zealand 11(3/CE): 105-11.
406. Fairweather RH (1992) Beam column connections for multi-storey timber buildings. Research Report 92/5, Dept of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
407. Falconer BH (1968) Preliminary comments on damage to buildings in the Managua earthquake. Bull NZ Soc for Earthq Eng 1(2): 61-71.
408. Farrar JCM and Dolby RE (1972) Lamellar Tearing in Welded Steel Fabrication. The Welding Institute, Cambridge.
409. Fenwick RC (1983) Strength degradation of concrete beams under cyclic loading. Bull NZ Nat Soc for Earthq Eng 16(1): 25-38.
410. FIP (1977) Recommendations for the Design of Aseismic Prestressed Concrete Structures. Federation International de la Precontrainte, FIP/7/1.
411. Goodsir WJ, Paulay T and Carr AJ (1984) A design procedure for interacting wall-frame structures under cyclic actions. Proc. 8th World Conf on Earthq Eng, San Francisco V: 621-8.
412. Gulkan P, Mayes RL and Clough RW (1979) Shaking table study of single-storey masonry houses, volume 1: Test structures 1 and 2. Earthq Eng Res Center Report No UCB/EERC-79/23.
413. He Gyuangquian, Wei Lian, Zhong Lican and Dai Guoying (1984) New procedure for aseismic design of multistorey shear type building based upon deformation checking. Proc. 8th World Conference Earthquake Engineering, San Francisco V: 483-90.
414. Hjelmstad KD and Popov EP (1983) Seismic behaviour of active beam links in eccentrically braced frames. Report No UBC/EERC-83/15, Earthq Eng Res Center, Univ of Calif, Berkeley.
415. HERA (1995) Seismic design procedures for steel structures. HERA Manukau City, New Zealand, HERA Report R4-76.
416. HERA (1999) Structural steelwork connections guide. HERA, Manukau City, New Zealand, HERA Report R4-100.
417. Holmes WT and Somers P (eds)(1995) Northridge earthquake of January 17, 1994. Reconnaissance report-Volume 2. Earthquake Spectra, Supplement C to Volume 11.
418. IBC (2000) International building code. International Code Council, USA.
419. Johns KC and Madsen B (1982) Duration of load effects in lumber, Parts I, II, III. Canadian J Civil Eng 9(3): 502-36.
420. Kasai K and Popov EP (1984) On seismic design of eccentrically braced steel frames. Proc. 8th World Conf on Earth Eng, San Francisco V: 387-94.
421. Kato B (1974) A criteria of beam-to-column joint panels. Bull NZ Nat Soc for Earthq Eng 7(1): 14-26.
422. Kato B and Nako M (1973) The influence of elastic plastic deformation of beam-to-column connections on the stiffness, ductility and strength of open frames. Proc. 5th World Conf on Earthq Eng, Rome 1: 825-8.
423. Kent DC and Park R (1971) Flexural members with confined concrete. Proc. ASCE 97(ST7):1969-90.
424. Krawinkler H (1996) Earthquake design and performance of steel structures. Bull NZ Nat Soc for Earthq Eng 29(4): 229-41.
425. Lay MG and Galambos TV (1967) Inelastic beams under moment gradient. J Struct Div 93(ST1):389-99.
426. Manos GC, Clough RW and Mayes RL (1984) A three component shaking table study of the dynamic response of a single storey masonry house. Proc. 8th World Conf on Earthq Eng, San Francisco VI: 855-62.
427. Mast RF (1972) Seismic design of a 24-storey building with precast elements. J Prestressed Conc Institute 17: 45-59.
428. McKay GR (1985) Materials and workmanship. Bull NZ Nat Soc for Earthq Eng 18(4): 400-5.
429. Medearis K (1966) Static and dynamic properties of shear structures. Proc Intl Symp effects of repeated loading on Materials and Structures, RILEM-Inst Eng, Mexico VI.
430. Meli R (1973) Behaviour of masonry walls under lateral loads. Proc. 5th World Conf on Earthq Eng, Rome 1: 853-62.
431. NBS (1971) The San Fernando California earthquake of February 9, 1971. NBS Report 10 556, US Dept of Commerce, National Bureau of Standards.
432. Neal BG (1961) The effect of shear and normal forces on the fully plastic moment of an I beam. J Mech Eng Sci 3.
433. Nicholas CJA (1985) Connection design. Bull NZ Nat Soc for Earthq Eng 18(4): 360-8.
434. NZCS (1998) Examples of concrete structural design to New Zealand Standard 3101. Cement and Concrete Association of New Zealand, Porirua (Red Book).
435. NZS 3101 (1995) Concrete structures standard. Standards New Zealand, Wellington, Parts 1 and 2.
436. NZS 3603 (1993) Timber structures standard. Standards New Zealand, Wellington.
437. NZS 4230: Part 1 (1990) Code of practice for the design of masonry structures. Standards New Zealand, Wellington.
438. NZS4230: Part 2 (1990) Commentary on the design of masonry structures. Standard New Zealand, Wellington.
439. NZS3404 (1997) Steel structures standard. Standards New Zealand, Wellington.
440. NZSG (1991) Guidelines for the use of structural precast concrete in buildings. Report of a Study Group of NZ Concrete Soc and the NZ Nat Soc for Earthq Eng.
441. Oesterle RG, Fiorato AE and Corley WG (1980) Reinforcement details for earthquake resistant structural walls. Concrete International Design and Construction 2(12): 55-66.
442. Page AW (1996) Unreinforced masonry structures-An Australian overview. Bull NZ Nat Soc for Earthq Eng 29(4): 242-55.
443. Paparoni M, Ferry Borges J and Whitman RW (1973) Seismic studies of Parque Central buildings. Proc. 5th World Conf on Earthq Eng, Rome 2: 1991-2000.
444. Park R (1980) Ductility of reinforced concrete frames under seismic loading. NZ Engineering 23(11): 427-35.
445. Park et al. (1995) The Hyogo-ken Nanbu earthquake of 17 January 1995. Bull NZ Nat Soc for Earthq Eng 28(1): 1-98.
446. Park R and Paulay T (1980) Concrete Structures. In Design of Earthquake Resistant Structures (Ed E Rosenblueth). Pentech Press, London.
447. Park R, Priestley MJN and Gill WD (1982) Ductility of square confined concrete columns. J Struct Divn 108(ST4): 929-50.
448. Park R, Priestley MJN, Falconer TJ and Joen PH (1984) Detailing of prestressed concrete piles for ductility. Bull NZ Nat Soc for Earthq Eng 17(4): 251-71.
449. Paulay T (1972) Some aspects of shear wall design. Bull NZ Nat Soc for Earthq Eng 5(3): 89-105.
450. Paulay T and Priestley MJN (1992) Seismic design of reinforced concrete and masonry buildings. John Wiley & Sons, New York.
451. Paulay T and Williams RL (1980) The analysis and design of and the evaluation of design actions for reinforced concrete ductile shear wall structures. Bull NZ Nat Soc for Earthq Eng 13(2): 108-43.
452. Petrovic B, Muravljov M and Dimitrievic R (1970) The IMS assembly framework system and its resistance to seismic influences. Earthquake Engineering, Proc. 3rd Europ Symp on Earthq Eng, Sofia, 513-20.
453. Pfrang EO, Seiss CP and Sozen MA (1964) Load-moment-curvature characteristics of r.c. cross sections. ACI J 61: 763-78.
454. Pond WF (1972) Performance of bridges during the San Fernando earthquake. J Prestressed Conc Institute 17(4): 65-75.
455. Popov EP and Pinkney RB (1969) Cyclic yield reversal in steel building connections. J Struct Div 95(ST3): 327-53.
456. Popov EP and Stephen RM (1972) Cyclic loading of full size steel connections. Am Iron and Steel Institute, Steel Research for Constr Bull No 21.
457. Priestley MJN and Calvi GM (1997) Concepts and procedures for direct displacement-based design. In Fajfar and Krawinkler (eds), Seismic design methodologies for the next generation of codes. Balkema, Rotterdam: 171-81.
458. Priestley MJN, Seible, F and Calvi, GM (1996). Seismic design and retrofit of Bridges. John Wiley & Sons, New York.
459. Priestley MJN and Elder DM (1982) Cyclic loading tests of slender concrete masonry shear walls. Bull NZ Nat Soc for Earth Eng 15(1): 3-21.
460. Roeder CW and Popov EP (1978) Eccentrically braced steel frames for earthquakes. J Struct Div 104(ST3): 391-412.
461. Sakamoto I, Ohashi Y and Shibata M (1984) Some problems and considerations on aseismic design of wooden dwelling houses in Japan. Proc. 8th World Conf on Earthq Eng, San Francisco V: 669-76.
462. Salse EAB and Fintel M (1973) Strength, stiffness and ductility properties of slender shear walls. Proc. 5th World Conf on Earthq Eng, Rome 1: 919-28.
463. Sauter F (1984) Earthquake resistant criteria for precast concrete structures. Proc. 8th World Conf on Earthq Eng, San Francisco V: 629-36.
464. Selna L, Martin I, Park R and Wyllie L (1980) Strong and tough concrete columns for seismic forces. J Struct Divn 106(ST8): 1717-34.
465. Sidwell GK (1985) Eccentrically braced frames. Bull NZ Nat Soc for Earthq Eng 18(4): 355-9.
466. Smith PC, Dowrick DJ and Dean JA (1986) Horizontal timber diaphragms for wind and earthquake resistance. Bull NZ Nat Soc for Earthq Eng 19(2): 135-42.
467. Spencer RA (1978) Rate of loading effects for Douglas-fir lumber. First Intl Conf on Wood Fracture, Banff, Canada.
468. Sugiyama H (1984) Japanese experience and research on timber buildings in earthquakes. Proc Pacific Timber Eng Conf, Auckland III: 431-8.
469. Takanashi K, Udugawa K and Tanaka H (1973) Failure of steel beams due to lateral buckling under repeated loads. Symp on Resistance and Ultimate Deformability of Structures Acted on by Well Defined Loads, IABSE, Lisbon, Preliminary Report: 163-9.
470. Tanaka H, Park R and MacNamee B (1985) Anchorage of transverse reinforcement in rectangular reinforced concrete columns in seismic design. Bull NZ Nat Soc for Earthq Eng 18(2): 165-90.
471. Teal EJ (1968) Structural steel seismic frames-draft ductility requirements. Proc. 37th Annual Conv, Struct Engrs Assn of Calif.
472. Thurston FJ and Flack PF (1980) Cyclic load performance of timber sheathed bracing walls. NZ Ministry of works and Development, Central Laboratories, Report No 5-80/10.
473. Timber Engineering Company (1956) Timber design and construction handbook. FW Dodge Corporation, New York.
474. TMS (2001) Masonry Designer's Guide. The Masonry Society, Boulder, Colorado, USA.
475. Tso WK, Pollner E and Heidebrecht AC (1973) Cyclic loading on externally reinforced masonry walls. Proc. 5th World Conf on Earthq Eng, Rome 1: 1177-86.
476. Uang C-M and Lathan CT (1995) Cyclic testing of full-scale MNH-SMRF moment connections. Structural Systems Research, Univ of Calif, San Diego.
477. Uchida N, Aoyagi T, Kawamura M and Nakagawa K (1973) Vibration test of steel frame having precast concrete panels. Proc. 5th World Conf on Earthq Eng, Rome 1: 1167-76.
478. Udugawa K, Takanashi and Kato B (1984) Effects of displacement rates on the behaviour of steel beams and composite beams. Proc. 8th World Conf on Earthq Eng, San Francisco VI:177-84.
479. Vann WP, Thompson LE, Walley LE and Ozier LD (1973) Cyclic behaviour of rolled steel members. Proc. 5th World Conf on Earthq Eng, Rome 1: 1187-93.
480. Wade J (1972) The weldability of modern structural steels. Symposium on modern applications of welding technology in steel structures, University of New South Wales: 233-38.
481. Wakabayashi M and Nakamura T (1984) Reinforcing principle and seismic resistance of brick masonry walls. Proc. 8th World Conf on Earthq Eng, San Francisco V: 661-8.
482. Wakabayashi M, Nakamura T, Iwai S and Hayashi Y (1984) Effects of strain rate on the behaviour of structural members subjected to earthquake force. Proc. 8th World Conf on Earthq Eng, San Francisco IV: 491-8.
483. Walpole WR (1985a) Beam-column joints. Bull NZ Nat Soc for Earthq Eng 18(4): 369-80.
484. Walpole WR (1985b) Concentrically braced frames. Bull NZ Nat Soc for Earthq Eng 18(4): 351-5.
485. Walpole WR and Butcher GW (1985) Beam design. Bull NZ Nat Soc for Earthq Eng 18(4): 337-43.
486. Williams D and Scrivener JC (1971) Behaviour of reinforced masonry shear walls under cyclic loading. Bull NZ Nat Soc for Earthq Eng 4(2): 316-32.
487. Yap KK (1985) Slow cyclic shear testing of shear panels bonded with adhesives. NZ Ministry of Works and Development, Central Laboratories Report No 5-85/14.
488. Beattie GJ (2000) The design of building services for earthquake resistance. Paper No 2462, Proc. 12th World Conf on Earthq Eng, Auckland (CD Rom).
489. Berry OR (1972) Architectural Seismic detailing. State of the Art Report No. 3, Technical Committee No 12, Architectural-Structural Interaction IABSE-ASCE, Int Conf on Planning and Design of Tall Buildings, Lehigh University (Conf Preprints, Reports Vol. 1a-12).
490. Blackwell FN (1970) Earthquake protection for mechanical services. NZ Engineering 25(10): 271-5.
491. Chandrasekeran AR and Singhal NC (1984) Behaviour of a 220 kV transformer under simulated earthquake conditions. Proc. 8th World Conf on Earthq Eng, San Francisco VIII: 149-56.
492. Chang IK (1984) Dynamic testing and analysis of improved computer/clean room raised floor system. Proc. 8th World Conf on Earthq Eng, San Francisco V: 1175-80.
493. Dowrick DJ, Babor J, Cousins WJ and Skinner RI (1992) Seismic isolation of a printing press in Wellington, New Zealand. Bull NZ Nat Soc for Earthq Eng 25(3): 161-6.
494. Gilmour RM and Hitchcock HC (1971) Use of yield ratio response spectra to design yielding members for improving earthquake resistance of brittle structures. Bull NZ Soc for Earthq Eng 4(2): 285-93.
495. Hitchcock HC (1969) Electrical equipment and earthquakes. NZ Engineering 24(1).
496. Hollings JP, Sharpe RD and Jury RD (1986) Earthquake performance of a large boiler. Proc. 8th Europ Symp on Earthq Eng, Portugal.
497. Housner GW and Jennings PC (1972) The San Fernando earthquake. Earthq Eng and Struc Dyn 1(1): 5-32.
498. Igusa T and Der Kiureghian A (1985) Generation of floor response spectra include oscillatorstructure interaction. Earthq Eng and Struc Dyn 13(5): 661-76.
499. Lopez G, Makimoto Y, Mii T, Mitsuhashi K and Pankow B (1984) Analytical-experimental dynamic analysis of the El Centro power plant unit No. 4 steam generator. Proc. 8th World Conf on Earthq Eng, San Francisco VII: 189-96.
500. Makris N and Roussos Y (1998) Rocking response and overturning of equipment under horizontal pulse-type motions. Pacific Earthq Eng Res Center, University of California. PEER-98/05.
501. Makris N, Roussos Y and Zhang J (1999) Rocking response and overturning of electrical equipment under pulse-type motions. PEER Center News 2(2): 1-6, 12.
502. Pender MJ and Robertson TW (1987) Edgecumbe earthquake: reconnaissance report. Bull NZ Nat Soc for Earthq Eng 20(3): 201-49.
503. Pham T and Hoby P (1991) The design, testing and application of Belleville washers as a damping device for seismic protection of electrical equipment. Proc. Pacific Conf on Earthq Eng, Auckland 3: 381-91.
504. Priestley MJN and seven others (1986) Seismic design of storage tanks. Recommendations of a Study Group of the NZ Nat Soc for Earthq Eng.
505. SANZ (1983) Specification for seismic resistance of engineering systems in buildings. NZS 4219 : 1983. Standards Association of New Zealand.
506. SANZ (1984) Code of practice for general structural design and design loadings for buildings. NZS 4203 : 1984. Standards Association of New Zealand.
507. Schiff AJ (1984) Seismic design practice for electrical power substations. Proc. 8th World Conf on Earthq Eng, San Francisco VIII: 181-8.
508. Schneider S, Lee HM and Godden WG (1982) Behaviour of a piping system under excitation: (etc). Report No. UCB/EERC-809/03, Earthq Eng Res Center, University of California, Berkeley.
509. Shibata H, Sata H and Shigeta T (1964) Aseismic design of machine structures. Proc. 3rd World Conf on Earthq Eng, New Zealand 2: II-552.
510. Skinner RI, Robinson WH and McVerry GH (1993) An introduction to seismic isolation. [Updated and modified in Chinese and Japanese (1998)]. John Wiley & Sons, Chichester, UK.
511. Spencer P (1980) The design of steel energy-absorbing restrainers and their incorporation into nuclear power plant for enhanced safety (Vol 5): Summary report. Report No UCB/EERC-80/34, Earthq Eng Res Center, University of California, Berkeley.
512. USGS (1971) The San Fernando earthquake of February 9th, 1971. Geological Survey Professional Paper 733, US Govt, Washington.
513. Winthrop D and Hitchcock HC (1971) Use of yield ratio response spectra to design yielding members for improving earthquake resistance of brittle structures. Bull NZ Soc for Earthq Eng 4(2): 294-300.
514. Arnold C (1984) Non-structural issues of seismic design and construction. Earthquake Engineering Research Institute, Oakland, California.
515. Arnold C (1991) The seismic response of non-structural elements in buildings. Bull NZ Nat Soc Earthq Eng 24(4): 306-16.
516. Arnold C and Reitherman R (1982) Building Configuration and Seismic Design. John Wiley & Sons, New York.
517. Berry DR (1972) Architectural seismic detailing. State of the Art Report No 3, Technical Committee No 12, Architectural-Structural Interaction. IABSE-ASCE Int Conf on Planning and Design of Tall Buildings, Lehigh University.
518. Clarke WD and Glogau OA (1979) Suspended ceilings: the seismic hazard and damage problem and some practical solutions. Bull NZ Nat Soc for Earthq Eng 12(4): 292-304.
519. Dolsek M and Fajfar P (2001) Soft storey effects in uniformly infilled reinforced concrete frames. J Earthq Eng 5(1): 1-12.
520. Massey W (1992) Architectural design for earthquake-A guide to the design of non-structural elements. New Zealand Nat Soc Earthq Eng.
521. Osawa Y, Morishita T and Murakami M (1965) On the damage to window glass in reinforced concrete buildings during the earthquake of April 20, 1965. Bull Earthq Res Institute, University of Tokyo 43: 819-27.
522. Rihal SS and Granneman G (1984) Experimental investigation of dynamic behaviour of building partitions and suspended ceilings during earthquakes. Proc. 8th World Conf on Earthq Eng, San Francisco V: 1135-40.
523. Shipp JG and Johnson MW (1990) Seismic loss estimation for non-structural components in high-rise buildings. Proc. 4th US Nat Conf on Earthq Eng. EERI, Oakland, California.
524. Aguilar J, Juares H, Ortega R and Iglesisas J (1989) Statistics of retrofitting techniques in reinforced concrete buildings. Earthquake Spectra 5(1): 145-52.
525. Applied Technology Council (1996) ATC 40: The Seismic Evaluation and Retrofit of Concrete Buildings. 2 volumes. Redwood City, USA.
526. Bell DK and Davidson BJ (2001) Evaluation of earthquake risk buildings with masonry infill panels. Paper No 4.02.01. Technical Conference of NZ Soc for Earthq Eng, Wairakei, New Zealand.
527. Bertero VV, Anderson JC and Krawinkler H (1994) Performance of steel building structures during the Northridge earthquake. Report No UCB/EERC-94/09, Earthq Eng Res Center, University of California at Berkeley.
528. Charleson A, Preston J and Taylor M (2001) Architectural expression of seismic strengthening. Earthquake Spectra 17(3): 417-26.
529. Coburn A and Spence R (2002) Earthquake Protection (2nd Edn). John Wiley & Sons, Chichester, UK.
530. Comartin CD, Niewiarowski RW, Freeman SA and Turner FM (2000) Seismic evaluation and retrofit of concrete buildings: A practical overview of the ATC-40 document. Earthq Spectra 16(1): 241-61.
531. Cooney R (1982) Strengthening houses against earthquakes-A handbook of remedial measures. Technical Paper P37. Building Research Association of New Zealand, Judgeford, 58pp.
532. Deppe K (1988) The Whittier Narrows, California earthquake of October 1, 1987-Evaluation of strengthened and unstrengthened unreinforced masonry in Los Angeles city. Earthquake Spectra 4(1): 157-80.
533. Dowrick DJ and Rhoades DA (2000) Earthquake damage and risk experience and modelling in New Zealand earthquakes. Proc. 12th World Conf on Earthq Eng, Auckland, Paper No 0403 (CD Rom).
534. Dowrick DJ and Rhoades DA (2002) Damage ratios for low-rise non-domestic brick buildings in the magnitude 7.1 Wairarapa, New Zealand earthquake of 24 June 1942. Bull NZ Soc for Earthq Eng 35(3): 135-48.
535. EERI (1996) Northridge earthquake of January 17, 1994 reconnaissance report, Volume 2. Earthquake Spectra, Supplement C, 11 Chapters 8 and 9.
536. EERI (2001) Preliminary observations on the origin and effects of the January 26, 2001 Bhuj (Gujarat, India) earthquake. EERI Special Earthquake Report. Earthquake Engineering Research Institute Newsletter 35(4).
537. FEMA-178 (1992) NEHRP guidelines for seismic evaluation of existing buildings. Report FEMA-178, Federal Emergency Management Agency, Washington DC.
538. FEMA (1994) Performance of seismically rehabilitated buildings during the January 17, 1994 Northridge earthquake. Wiss, Janney, Elstner Associates, Inc, for the Federal Emergency Management Agency, Washington DC.
539. FEMA-156 (1994) Typical Costs for Seismic Rehabilitation of Existing Buildings. FEMA-156, Volume 1, 2nd edition. Federal Emergency Management Agency, Washington DC.
540. FEMA-273 (1997) NEHRP guidelines for the seismic rehabilitation of buildings. Report FEMA-273, Federal Emergency Management Agency, Washington DC.
541. FEMA-351 (2000) Recommended seismic evaluation and upgrade criteria for existing welded steel moment-frame buildings. FEMA-351. Federal Emergency Management Agency, Washington DC.
542. Holmes WT (2000) Risk assessment and retrofit of existing buildings. Proc. 12th World Conf on Earthq Eng, Auckland, Paper No 2826 (CD Rom).
543. Hopkins DC, Lumsden JL and Norton JA (1993). Lifelines in earthquakes: A case study based on Wellington. Bull NZ Nat Soc for Earthq Eng 26(2): 208-21.
544. Kameda H (2000) Engineering management of lifeline systems under earthquake risk. Proc. 12th World Conf on Earthq Eng, Auckland, paper 2827 (CD Rom).
545. Krawinkler H (1996) Earthquake design and performance of steel structures. Bull NZ Nat Soc for Earthq Eng 29(4): 229-41.
546. Liu A and Park R (2001) Seismic behaviour and retrofit of pre-1970's as-built exterior beamcolumn joints reinforced by plain round bars. Bull NZ Soc for Earthq Eng 34(1): 68-81.
547. NZNSEE (2002) Assessment and improvement of the structural performance of buildings in earthquakes. Draft for comment. Report prepared for the Building Industry Authority by the NZ Soc for Earthq Eng.
548. Park R (1997) A static force-based procedure for the seismic assessment of existing reinforced concrete moment resisting frames. Bull NZ Nat Soc for Earthq Eng 30(3): 213-226.
549. Park R (2001) Improving the resistance of structures to earthquakes. Bull NZ Soc for Earthq Eng 34(1): 1-39.
550. Park R and 12 others (1995) The Hyogo-ken Nanbu earthquake of 17 January 1995. Bull NZ Nat Soc for Earthq Eng 28(1): 1-98.
551. Pham T (1991) AC Power Group Ltd, Wellington, personal communication.
552. Poole RA and Clendon JE (1992) NZ parliament buildings seismic protection by base isolation. Bull NZ Nat Soc for Earthq Eng 25(3): 147-60.
553. Priestley MJN (1996) Displacement-based seismic assessment of existing reinforced concrete buildings. Bull NZ Nat Soc for Earth Eng 29(4): 256-272.
554. Priestley MJN, Seible F and Calvi GM (1996) Seismic Design and Retrofit of Bridges. John Wiley & Sons, New York.
555. Robinson L and Bowman I (2000) Guidelines for Earthquake Strengthening. New Zealand Historic Places Trust, Wellington, 13pp.
556. Schmid B (1994) Report on URM buildings for the City of Los Angeles Task Force on building damage. Sept 27.
557. Skinner RI, Robinson WH and McVerry GH (1993) An Introduction to Seismic Isolation. John Wiley & Sons, Chichester, UK.
558. Sritharan S and Dowrick DJ (1994) Response of low-rise buildings to moderate earthquake shaking, particularly the May 1990 Weber earthquake. Bull NZ Nat Soc Earthq Eng 27(3): 205-21.
559. SSC (1994) B18: Performance of retrofitted buildings. A compendium of background reports on the Northridge earthquake. Prepared under Executive Order W-79-94. California Seismic Safety Commission, November.