Fatigue properties of TiAl alloys

Intermetallics

Volumn 13, Issue 5, 2005, Pages 543-558

  Hénaff, Gilbert ^a   Gloanec, Anne Lise ^a  

^a CNRS   (France)

Author keywords

A. Titanium aluminides, based on TiAl; B. Fatigue resistance and crack growth; D. Microstructure (as cast. deformation induced, recrystallization induced)

Indexed keywords

CRACK PROPAGATION; CRYSTAL DEFECTS; FATIGUE OF MATERIALS; MICROSTRUCTURE; PARAMETER ESTIMATION; RELIABILITY; STRAIN; STRESSES;

EXTRINSIC FACTORS; FATIGUE RESISTANCE; HIGH-CYCLE FATIGUE; TITANIUM ALUMINIDES;

TITANIUM ALLOYS;

EID: 13644262660     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2004.09.007     Document Type: Article

References (78)

1. S.M.L. Sastry, and H.A. Lipsitt Fatigue deformation of TiAl base alloys Metall Trans A 8A 1977 299 308
2. J.M. Larsen Assuring reliability of gamma titanium aluminides in long-term service Y.-W. Kim D.M. Dimiduck M. Loretto Gamma titanium aluminides 1999 The Materials, Metals and Minerals Society 463 472
3. M. Grange, M. Thomas, J.L. Raviart, P. Belaygue, and D. Recorbet TiAl G4: investment cast processing and mechanical properties Y.-W. Kim A.H. Rosenberger H. Clemens International symposium on gamma titanium aluminides, San Diego, CA 2003 TMS 213 218
4. W.V. Vaidya, K.-H. Schwalbe, and R. Wagner Understanding the fatigue resistance of gamma titanium aluminide Y.-W. Kim R. Wagner M. Yamaguchi International symposium on gamma titanium aluminides 1995 The Minerals, Metals and Materials Society Warrendale, PA 867 874
5. S.A. Bentley, A.L. Mantle, and D.K. Aspinwall The effect of machining on the fatigue strength of a gamma titanium aluminide intertmetallic alloy Intermetallics 7 1999 967 969
6. P.E. Jones, and D. Eylon Effects of conventional machining on high cycle fatigue behavior of the intermetallic alloy Ti-47Al-2Nb-2Cr (at%) Mater Sci Eng A Struct Mater 263 1999 296 304
7. Berteaux O, Thomas M, François M. Effect of machining on high cycle fatigue of a gamma-TiAl Alloy. In: Euromat, Lausanne, Switzerland; 2003.
8. J. Lindemann, D. Roth-Fagaraseanu, and L. Wagner Mechanical surface treatments for enhancing fatigue performance of gamma titanium aluminides at ambient and elevated temperatures Y.-W. Kim A.H. Rosenberger H. Clemens International symposium on gamma titanium aluminides, San Diego, CA 2003 TMS 509 515
9. R. Pather, W.A. Mitten, P. Holdway, H.S. Ubhi, A. Wisbey, and J.W. Brooks The effect of high temperature exposure on the tensile properties of [gamma] TiAl alloys Intermetallics 11 2003 1015 1027
10. X. Wu, D. Hu, M. Preuss, P.J. Withers, and M.H. Loretto The role of surface condition, residual stress and microstructure on pre-yield cracking in Ti44Al8Nb1B Intermetallics 12 2004 281 287
11. P.K. Wright, S. Gilbert, A. Chatterjee, T. Cook, M.R. Mitchell, and A.H. Rosenberger Defect behavior in gamma titanium aluminides K.J. Hemker Structural intermetallics 2001 The Minerals, Metals & Materials Society 315 322 Snow King Resort, Jackson Hole, WY
12. S.J. Trail, and P. Bowen Effects of stress concentrations on the fatigue life of a gamma-based titanium aluminide Mater Sci Eng A - Struct Mater 193 1995 427 434
13. T.S. Harding, and J.W. Jones Behavior of gamma TiAl subjected to impact damage and elevated temperature fatigue Scripta Mater 42 1999 129 135
14. T.S. Harding, and J.W. Jones Fatigue thresholds of cracks resulting from impact damage to gamma-TiAl Scripta Mater 43 2000 623 629
15. T.S. Harding, and J.W. Jones The effect of impact damage on the room-temperature fatigue behavior of gamma-TiAl Metall Mater Trans A 31 2000 1741 1752
16. T.S. Harding, J.W. Jones, P.S. Steif, and T.M. Pollock Room temperature fatigue response of [gamma]-TiAl to impact damage Scripta Mater 40 1999 445 449
17. T.S. Harding, and J.W. Jones Evaluation of a threshold-based model of the elevated-temperature fatigue of impact-damaged [gamma]-TiAl Metall Mater Trans A 32A 2001 2975 2984
18. T.S. Harding, and J.W. Jones Effect of foreign object damage on the fatigue strength of an XD (TM) gamma-TiAl alloy Scripta Mater 43 2000 631 636
19. P.S. Stief, M.P. Rubal, G.T. Gray III, and J.M. Pereiras Damage in gamma titanium aluminides due to small particle impacts J Mech Phys Solids 46 1998 2069 2086
20. S.L. Draper The effect of ballistic impacts on the high-cycle fatigue properties of Ti-48Al-2Nb-2Cr (atomic percent) Metall Mater Trans A 32A 2001 2743 2758
21. S.L. Draper Effect of impact damage on the fatigue response of TiAl alloy-ABB-2 K.J. Hemker Structural intermetallics 2001 The Minerals, Metals & Materials Society 295 304 Snow King Resort, Jackson Hole, Wy
22. V. Recina, and B. Karlsson High temperature low cycle fatigue properties of Ti-48Al-2Cr-2Nb gamma titanium: aluminides cast in different dimensions Scripta Mater 43 2000 609 615
23. V. Recina, and B. Karlsson High temperature low cycle fatigue properties of Ti-48Al-2W-0.5Si gamma titanium aluminide Mater Sci Eng A 262 1999 70 81
24. V. Recina, D. Lundstroem, and B. Karlsson Tensile, creep, and low-cycle fatigue behavior of a cast g-TiAl-based alloy for gas turbine applications Metall Mater Trans A 33A 2002 2869 2881
25. V. Recina High temperature low cycle fatigue properties of two cast gamma titanium aluminide alloys with refined microstructures Mater Sci Technol 16 2000 333 340
26. Y.W. Kim Overview: ordered intermetallic alloys. 3. Gamma-titanium aluminides Jom-J Min Metall Mater Soc 46 1994 30 39
27. Y. Umakoshi, H.Y. Yasuda, and T. Nakano Plastic anisotropy and fatigue of TiAl PST crystals: a review Intermetallics 4 1996 S65 S75
28. Y.S. Park, S.W. Nam, S.K. Hwang, and N.J. Kim The effect of the applied strain range on fatigue cracking in lamellar TiAl alloy J Alloys Compd 335 2002 216 223
29. Y. Umakoshi, H.Y. Yasuda, and Y. Nakano The effect of orientation and lamellar structure on the fatigue behaviour of TiAl PST crystals Int J Fatigue 18 1996 65
30. A.-L. Gloanec, G. Hénaff, M. Jouiad, and D. Bertheau Low cycle fatigue behaviour of a gamma titanium aluminide alloy A.F. Blom Fatigue Eighth international fatigue congress, Stockholm 2002 EMAS UK 3039 3046
31. H.Y. Yasuda, T. Nakano, and Y. Umakoshi Cyclic deformation of Ti-Al alloys containing oriented lamellae Philos Mag A 71 1995 127 138
32. T.S. Srivatsan, W.O. Soboyejo, and M. Strangwood Cyclic fatigue and fracture behavior of a gamma-titanium aluminide intermetallic Eng Fract Mech 52 1995 107 120
33. W.Z. Chen, X.P. Song, K.W. Qian, and H.C. Gu Low cycle fatigue behaviour of γ-based Ti-48Al-2Mn-2Nb alloy produced by centrifugal spary deposition Int J Fatigue 20 1999 359 364
34. Gloanec A-L. PhD Thesis. University of Poitiers, Poitiers.
35. G. Malakondaiah, and T. Nicholas High-temperature low-cycle fatigue and lifetime prediction of Ti-24Al-11Nb alloy Metall Mater Trans A: Phys Metall Mater Sci 26A 1995 1113 1121
36. F. Appel, and R. Wagner Microstructure and deformation of two-phase [gamma]-titanium aluminides Mater Sci Eng: R: Rep 22 1998 187 268
37. F. Appel, U. Lorenz, M. Oehring, U. Sparka, and R. Wagner Thermally activated deformation mechanisms in micro-alloyed two-phase titanium aluminide alloys Mater Sci Eng A 233 1997 1 14
38. D. Haussler, U. Messerschmidt, M. Bartsch, F. Appel, and R. Wagner In situ high-voltage electron microscope deformation study of a two-phase ([alpha]2+[gamma]) Ti-Al alloy Mater Sci Eng A 233 1997 15 25
39. H.Y. Yasuda, T. Nakano, and Y. Umakoshi Thermal stability of deformation substructure of cyclically deformed TiAl PST crystals Intermetallics 4 1996 289 298
40. Y.S. Park, S.W. Nam, and S.K. Hwang Intergranular cracking under creep-fatigue deformation in lamellar TiAl alloy Mater Lett 53 2002 392 399
41. W. Elber The significance of crack closure Damage tolerance in aircraft structures, ASTM STP 486, Toronto, Ont., Canada 1971 American Society for Testing and Materials Philadelphia, PA p. 230-42
42. J. Petit, G. Hénaff, and C. Sarrazin-Baudoux Environmentally- assisted fatigue in the gaseous atmosphere Comprehensive structural integrity, 6: environmentally-assisted fracture 2003 Elsevier Amsterdam
43. A.-L. Gloanec, G. Henaff, D. Bertheau, P. Belaygue, and M. Grange Fatigue crack growth behaviour of a gamma-titanium-aluminide alloy prepared by casting and powder metallurgy Scripta Mater 49 2003 825 830
44. K.S. Chan Toughening mechanisms in titanium aluminides Metall Trans A 24A 1993 569 583
45. G. Hénaff, B. Bittar, C. Mabru, J. Petit, and P. Bowen Fatigue crack propagation resistance of a Ti-48Al-2Mn-2Nb alloy in the as-cast condition Mater Sci Eng 219 1996 212 220
46. A.H. Rosenberger Effect of environment on the fatigue crack growth of gamma titanium aluminide alloys at ambient temperatures Scripta Mater 44 2001 2653 2659
47. A. Ueno, and H. Kishimoto Fatigue crack propagation in TiAl intermetallic compounds G. Lutjering H. Nowack Fatigue'96, Berlin, Germany 1996 Pergamon Press Oxford 1731 1735
48. J.P. Campbell, K.T. Venkateswara Ro, and R.O. Ritchie Fatigue crack growth and fracture behavior in a XD (γ-TiAl alloy with a fine lamellar microstructure G. Lutjering H. Nowack Fatigue '96, Berlin, Germany 1996 Pergamon Press Oxford 1779 1784
49. J. Petit, and G. Hénaff Stage II intrinsic fatigue crack propagation Scripta Metall 25 1991 2683 2687
50. A.H. Rosenberger, B.D. Worth, and J.M. Larsen Effects of microstructure, temperature and environment on fatigue crack growth in Ti-46.5Al-3Nb-2Cr-0.2W M.V. Nathal R. Darolia C.T. Liu P.L. Martin D.B. Miracle Structural intermetallics 1997 The Minerals, Metals & Materials Society Seven Springs, PA 555 561
51. Mabru C. Étude du comportement en fissuration par fatigue des alliages intermétalliques TiAl. PhD Thesis. ENSMA - University of Poitiers (France)/The University of Birmingham (UK); 1997.
52. S.J. Balsone, J. Wayne Jones, and D.C. Maxwell Fatigue crack growth in a cast gamma titanium aluminide between 25 and 954 °C W.O. Soboyejo. S. Srivatsan D.L. Davidson Fatigue and Fracture of Ordered Intermetallic Materials: I 1994 TMS 307 318
53. K.S. Chan, and D.S. Shih Fundamental aspects of fatigue and fracture in a TiAl sheet alloy Metall Mater Trans A 29 1998 73 87
54. W.O. Soboyejo, J.E. Deffeyes, and P.B. Aswath Investigation of room-temperature and elevated-temperature fatigue crack growth in Ti-48Al Mater Sci Eng A - Struct Mater 138 1991 95 101
55. W.O. Soboyejo, and K. Lou Micromechanisms of fatigue and fracture in gamma based titanium aluminides Fatigue Fract Ordered Intermetall Mater: I; TMS 1994
56. W.O. Soboyejo, P.B. Aswath, and C. Mercer Mechanisms of fatigue crack growth in Ti-48Al at ambient and elevated temperature Scripta Metall Mater 33 1995 1169 1176
57. 2) TiAl intermetallic alloy Scripta Metall Mater 33 1995 459 465
58. A.L. McKelvey, J.P. Campbell, K.T. Venkateswara Ro, and R.O. Ritchie High temperature fatigue crack growth behavior in an XD™ γ-TiAl intermetallic alloy G. Lutjering H. Nowack Fatigue '96, Berlin, Germany 1996 Pergamon Press Oxford 1743 1748
59. A.L. McKelvey, K.T.V. Rao, and R.O. Ritchie High-temperature fracture and fatigue-crack growth behavior of an XD gamma-based titanium aluminide intermetallic alloy Metall Mater Trans A 31 2000 1413 1423
60. A.L. McKelvey, K.T.V. Rao, and R.O. Ritchie On the anomalous temperature dependence of fatigue-crack growth in gamma-based titanium aluminides Scripta Mater 37 1997 1797 1803
61. S. Lesterlin, C. Sarrazinbaudoux, and J. Petit Effects of temperature and environment interactions on fatigue crack propagation in a Ti alloy Scripta Mater 34 1996 651 657
62. C. Mabru, D. Bertheau, S. Pautrot, J. Petit, and G. Hénaff Influence of temperature and environment on fatigue crack propagation in a TiAl-based alloy Eng Fract Mech 64 1999 23 47
63. B.D. Worth, J.M. Larsen, S.J. Balsone, and J.W. Jones Mechanisms of ambient temperature fatigue crack growth in Ti-46.5Al-3Nb-2Cr-0.2W Metall Mater Trans A 28 1997 825 835
64. G. Hénaff, A. Tonneau, and C. Mabru Near-threshold fatigue crack growth mechanisms in TiAl alloys K.J. Hemker Structural intermetallics, Snow King Resort, Jackson Hole, WY 2001 The Minerals, Metals & Materials Society 571 580
65. A.-L. Gloanec Fatigue properties of aTi-48Al-2Cr-2Nb alloy produced by casting and powder metallurgy Y.-W. Kim A.H. Rosenberger H. Clemens International symposium on gamma titanium aluminides, San Diego, CA 2003 TMS 485 492
66. G. Hénaff, S.A. Cohen, C. Mabru, and J. Petit The role of crack-closure in fatigue crack propagation behaviour of a TiAl-based alloy Scripta Mater 34 1996 1449 1454
67. D.L. Davidson, and J.B. Campbell Fatigue crack growth through the lamellar microstructure of an alloy based on TiAl at 25 °C and 800 °C Metall Trans 24A 1993 1555 1574
68. J.M. Larsen, B.D. Worth, S.J. Balsone, A.H. Rosenberger, and J.W. Jones Mechanisms and mechanics of fatigue crack initiation and growth in TiAl intermetallic alloys G. Lutjering H. Nowack Fatigue'96, Berlin, Germany 1996 Pergamon Press Oxford 1719 1730
69. A.W. James, and P. Bowen Fracture and fatigue of TiAl Based Aluminides F.H. Froes I. Caplan Titanium'92, San Diego 1992 The Minerals, Metals & Materials Society 1139 1146
70. G. Hénaff, and A. Tonneau Environmental embrittlement of a FeAl alloy prepared by mechanical alloying under monotonic and cyclic loading K.J. Hemker Structural intermetallics 2001 The Minerals, Metals & Materials Society 571 580 Snow King Resort, Jackson Hole, WY
71. A.H. Rosenberger, B.D. Worth, and S.J. Balsone Environmental effects on the fatigue crack growth of gamma titanium aluminides G. Lutjering H. Nowack Fatigue'96, Berlin, Germany 1996 Pergamon Press Oxford 1785 1790
72. G. Hénaff Environmentally-Assisted Fatigue Crack Growth Mechanisms in Iron and Titanium Aluminides A.F. Blom Fatigue Eighth International Fatigue Congress, Stockholm 2002 EMAS UK 683 690
73. A. Carpinteri Stress-intensity factors for semi-elliptical surface cracks under tension or bending Eng Fract Mech 38 1991 327 334
74. M. Lang Explanation of an apparent abnormality in fatigue crack growth rate curves in titanium alloys Acta Mater 47 1999 1999 3735 see also p. 3247
75. H. Kitagawa, and S. Takahashi Applicability of fracture mechanics to very small cracks or the cracks in the early stage Second international conference on mechanical behavior of materials, Boston 1976 American Society for Metals p. 627-31
76. M. Nazmy, M. Staubli, G. Onofrio, and V. Lupinc Surface defect tolerance of a cast TiAl alloy in fatigue Scripta Mater 45 2001 787 792
77. J.P. Campbell, J.J. Kruzic, S. Lillibridge, K.T. Venkateswara Rao, and R.O. Ritchie On the growth of small fatigue cracks in [gamma]-based titanium aluminides Scripta Mater 37 1997 707 712
78. A.H. Rosenberger The influence of lamellar colony orientation on crack initiation in lamellar gamma titanium aluminides A.F. Blom Fatigue'2002, Stockholm, Sweden 2002 EMAS UK 3023 3030