Tensile, creep, and low-cycle fatigue behavior of a cast γ-TiAl-based alloy for gas turbine applications

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 33, Issue 9, 2002, Pages 2869-2881

  Recina, V ^a   Lundstrom D ^a   Karlsson, B ^b  

^a VOLVO AERO CORPORATION   (Sweden)

^b CHALMERS UNIVERSITY OF TECHNOLOGY   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

COMPOSITION EFFECTS; COOLING; CREEP; DUCTILITY; FATIGUE OF MATERIALS; GAS TURBINES; GRAIN BOUNDARIES; METAL CASTING; METALLOGRAPHIC MICROSTRUCTURE; SOLIDIFICATION; STRENGTH OF MATERIALS; TENSILE PROPERTIES;

COARSE GRAINED LAMELLAR MICROSTRUCTURE; PSEUDODUPLEX MICROSTRUCTURE; TITANIUM ALUMINIDE ALLOYS;

TITANIUM ALLOYS;

EID: 0036709127     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-002-0272-5     Document Type: Article

References (47)

1. D. Larsen and C. Govern: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 405-14.
2. S.V. Ram and J.R. Barett: in Titanium '95: Science and Technology, P.A. Blankinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1996, pp. 88-96.
3. Y.-W. Kim: Acta Metall. Mater., 1992, vol. 40, pp. 1121-34.
4. A. Mantle and D.K. Aspinwall: in Titanium '95: Science and Technology, P.A. Blankinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1966, pp. 248-55.
5. P.L. Threadgill: Mater. Sci. Eng. A, 1995, vols. 192-193, pp. 640-46.
6. Y.-W. Kim: J. Met., 1994, vol. 46, pp. 30-39.
7. C.M. Austin, T.J. Kelly, K.G. McAllister and J.C. Chessnutin: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 413-25.
8. M. Blum, A. Choudhary, H. Scholz, G. Jarczyk, G. Frommeyer, P. Busse, and S. Knippscheer: in Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 35-39.
9. S. Isobe and T. Noda: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 427-33.
10. T. Tetsui: Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 15-23.
11. S.C. Huang: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.P. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 299-308.
12. V. Recina and B. Karlsson: Mater. Sci. Technol., 1999, vol. 15, pp. 57-66.
13. D. Lundström and B. Karlsson: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 461-68.
14. D. Lundström, M. Knutson-Wedel, and B. Karlsson: in Gamma Titanium Intermetallics, TMS-AIME, Warrendale, PA, 1999, pp. 693-700.
15. V. Recina, J. Ahlström, and B. Karlsson: Mater. Characterization, 1997, vol. 38, pp. 287-300.
16. S. Mitao, S. Tsuyama, and K. Minakawa: Mater. Sci. Eng. A, 1993, vol. 143, pp. 51-62.
17. D.R. Johnson, Y. Masuda, Y. Shimada, H. Inui, and M. Yamaguchi: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, p. 287.
18. S. Naka, M. Thomas, C. Sanches, and T. Khan: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, p. 313.
19. D. Lundström, M. Knutson-Wedel and B. Karlsson: in Materials for Advanced Power Engineering, J. Lecomte-Beckers, F. Schubert, and P.J. Ennis, eds., European Commission, Forschungszentrum Jülich, 1998, pp. 1229-38.
20. J.P. Kuang, R.A. Harding, and J. Kampbell: Mater. Sci. Technol., 1997, vol. 15, pp. 840-50.
21. A.S. Booth and S.G. Roberts: Acta Metall. Mater., 1997, vol. 45, pp. 1045-53.
22. R. Gnanamoorthy, Y. Mutoh, and Y. Mizuhara: Mater. Sci. Eng. A, 1995, vol. 197, pp. 69-77.
23. J. Beddoes, L. Zhao, P. Au, D. Dudzinski, and J. Triantafillou: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 109-18.
24. K.J. Hemker, M.J. Mills, and W.D. Nix: Acta Metall. Mater., 1991, vol. 39, pp. 1901-13.
25. T.S. Rong, I.P. Jones, and R.E. Smallman: Acta Metall. Mater., 1998, vol. 46, pp. 4507-17.
26. J. Beddoes, W. Wallace, and L. Zhao: Int. Mater. Rev., 1995, vol. 40, pp. 197-217.
27. M.A. Morris and M. Leboeuf: J. Mater. Res., 1998, vol. 13, pp. 625-38.
28. S.W. Schwenker and Y.-W. Kim: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 985-92.
29. D. Lundström, E.M. Knutson-Wedel, and B. Karlsson: in Electron Microscopy 1998, H.A. Calderón Benavides and M.J. Yacamón, eds., Institute of Physics Publishing, Bristol, 1998, vol. II, pp. 73-74.
30. M. Lu and K.J. Hemker: Acta Metall. Mater., 1997, vol. 45, pp. 3573-85.
31. V. Recina and B. Karlsson: Mater. Sci. Eng. A, 1999, vol. 262, pp. 70-81.
32. ASTM Standard E606, Annual Book of Standards, ASTM, Philadelphia, PA, 1996, vol. 03.01.
33. V. Lupinc, M. Marchionni, M. Nazmy, G. Onofrio, L. Rémy, M. Staubli, and W.M. Yin: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 515-22.
34. V. Recina and B. Karlsson: Scripta Mater., 2000, vol. 43, pp. 609-15.
35. S.-C. Huang and E.L. Hall: Metall. Trans A, 1991, vol. 22, pp. 427-39.
36. D.S. Shih, D.S. Schwartz, and J.E. O'Neal: High-Temperature Ordered Intermetallic Alloys, Materials Research Society, 1993, vol. 288, pp. 579-84.
37. S. Tsuyama, S. Mitao, and K. Minakawa: Mater. Sci. Eng. A, 1992, vol. 153, pp. 451-56.
38. B. Skrotzki, T. Rudolf, and G. Eggeler: Z. Metallkd., 1999, vol. 90, pp. 393-402.
39. B. Skrotzki, T. Rudolf, A. Dlouhy, and G. Eggeler: Scripta Mater., 1998, vol. 39, pp. 1545-51.
40. M.A. Morris and M. Leboeuf: Mater. Sci. Eng. A, 1997, vols. 239-240, pp. 429-37.
41. M.A. Morris and M. Leboeuf: Intermetallics, 1997, vol. 5, pp. 339-54.
42. M. Es-Souni, A. Bartels, and R. Wagner: in Structural Intermetallics, R. Darolia, J.J. Lewandowski, C.T. Liu, P.L. Martin, D.P. Miracle, and M.V. Nathal, eds., TMS, Warrendale, PA, 1993, pp. 335-43.
43. Z. Jin, S.-W. Cheong, and T.R. Bieler: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 975-83.
44. V. Recina: Mater. Sci. Technol., 2000, vol. 16, pp. 333-40.
45. B.D. Worth, J.M. Larsen, and A.H. Rosenberger: in Structural Intermetallics, M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1997, pp. 563-69.
46. S.J. Balsone, J.M. Larsen, C.D. Maxwell, and J.W. Jones: Mater. Sci. Eng., 1995, vols. A192-A193, pp. 457-64.
47. M. Yamaguchi and H. Inui: in Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamaguchi, eds., TMS, Warrendale, PA, 1995, pp. 127-42.