Effects of conventional machining on high cycle fatigue behavior of the intermetallic alloy Ti-47Al-2Nb-2Cr (at.%)

Materials Science and Engineering: A

Volumn 263, Issue 2, 1999, Pages 296-304

  Jones, P E ^a   Eylon, D ^b  

^a GENERAL MOTORS CORPORATION   (United States)

^b UNIVERSITY OF DAYTON   (United States)

Author keywords

Fatigue; Machining effects; Surface integrity; TiAl; TiAl castings

Indexed keywords

CRACK INITIATION; DEFORMATION; DUCTILITY; ELECTROLYTIC POLISHING; FATIGUE OF MATERIALS; FATIGUE TESTING; GRINDING (MACHINING); HARDNESS; INTERMETALLICS; RECRYSTALLIZATION (METALLURGY); STRENGTH OF MATERIALS; TURNING;

TITANIUM ALUMINIDE CASTINGS;

TITANIUM ALLOYS;

EID: 0039723184     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/S0921-5093(98)01160-5     Document Type: Article

References (27)

1. [1] N. Zlatin, M. Field, Procedures and precautions in machining titanium alloys, in: R.I. Jaffee, H.M. Burte (Eds.), Titanium Science and Technology, vol. 1, Plenum Press, New York, 1973, pp. 489-503.
2. [2] L. Wagner, C. Gerdes, G. Lutjering, Influence of surface treatment on fatigue strength of Ti-6Al-4V, in: G. Lutjering, U. Zwicker, W. Bunk (Eds.), Titanium Science and Technology, vol. 4, Deutsche Gesellschaft für Metallkunde E.V., Germany, 1985, pp. 2147-2154.
3. [3] L. Wagner, G. Lutjering, Influence of surface condition on fatigue strength, in: H. Kitigawa, T. Tanaka (Eds.), Fatigue '90, Materials and Component Engineering Publications, Birmingham, UK, 1990, pp. 323-328.
4. [4] R.W. Hertzberg, Deformation and Fracture Mechanics of Engineering Materials, 3rd. Ed., Wiley, New York, 1989, pp. 457, 476-477, 509-511.
5. [5] C.M. Austin, T.J. Kelly, K.G. McAllister, J.C. Chesnutt, Aircraft engine applications for gamma titanium aluminide, in: M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi (Eds.), Structural Intermetallics 1997, TMS, 1997, pp. 413-425.
6. [6] S. Isobe, T. Noda, Automotive application of TiAl intermetallics, in: M.V. Nathal, R. Darolia, C.T. Liu, P.L. Martin, D.B. Miracle, R. Wagner, M. Yamaguchi (Eds.), Structural Intermetallics 1997, TMS, 1997, pp. 427-433.
7. [7] K.S. Chan, The Fatigue Resistance of TiAl-Based Alloys, JOM, 49(7), 1997, pp. 53-58.
8. [8] M.J. Blackburn, M.P. Smith, R & D on composition and processing of titanium aluminide alloys for turbine engines, AFWAL-TR-82-4086, Wright Laboratories, WPAFB, OH, 1982, pp. 69-81.
9. [9] H. Zhang, M.L.H. Wise, D.K. Aspinwall, The Surface Quality of HIPped Gamma Titanium Aluminide Bar After Turning, in: Proceedings of the 31st International MATADOR Conference, Dept. of Mechanical Engineering, UMIST, Manchester, UK, 1995, pp. 217-221.
10. [10] H. Zhang, M.L.H. Wise, D.K. Aspinwall, The Machining of TiAl-based Intermetallics, in: Proceedings of the 30th International MATADOR Conference, UMIST, Manchester, UK, 1993, pp. 111-118.
11. [11] H. Zhang, A. Mantle, M.L.H. Wise, Investigation of surface and sub-surface damage of γ-titanium aluminide after creep feed grinding, in: P.A. Blenkinsop, W.J. Evans, H.M. Flower (Eds.), Titanium '95 Science and Technology, vol. I, The Institute of Materials, London, UK, 1996, pp. 497-503.
12. [12] A.L. Mantle, D.K. Aspinwall, M.L.H. Wise, Single point turning of gamma titanium aluminide intermetallic, in: P.A. Blenkinsop, W.J. Evans, H.M. Flower (Eds.), Titanium '95 Science and Technology, vol. I, The Institute of Materials, London, UK, 1996, pp. 248-255.
13. [13] S. Chatterjee, Machinability of a Nickel Aluminide Intermetallic Alloy, J. Mat. Eng. Perf., vol. 2(1), 2/93, pp. 101-106.
14. [14] M.J. Blackburn, D.L. Ruckle, C.E. Bevan, Research to Conduct an Exploratory Experimental and Analytical Investigation of Alloys, AFML-TR-78-18, Wright Laboratories, WPAFB, 1978, pp. 121-126 and 185-194.
15. [15] J.M. Rakowski, G.H. Meier, F.S. Pettit, F. Dettenwanger, E. Schumann, M. Rühle, The effect of surface preparation on the oxidation behavior of gamma TiAl-base intermetallic alloys, Scripta Mat., 35(12), 1996, pp. 1417-1422.
16. [16] S.J. Trail, P. Bowen, Effects of stress concentrations on the fatigue life of a gamma based titanium aluminide, in: Y.-W. Kim, R. Wagner, M. Yamaguchi (eds.), Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 883-892.
17. [17] W.V. Vaidya, K.-H. Schwalbe, R. Wagner, Understanding the fatigue resistance of gamma titanium aluminide, in: Y.-W. Kim, R. Wagner, M. Yamaguchi (eds.), Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 867-874.
18. [18] S.C. Huang, M.F.X. Gigliotti, US Patent 4,879,092, 1989.
19. [19] P.E. Jones, W.J. Porter III, D. Eylon, G. Colvin, Development of a low cost permanent mold casting process for TiAl automotive valves, in: Y.-W. Kim, R. Wagner, M. Yamaguchi (eds.), Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 53-62.
20. [20] P.E. Jones, D. Smits, D. Eylon, C. Smits, Centerless Grinding of TiAl Using Conventional Grinding Wheels, in: Y.-W. Kim, R. Wagner, M. Yamaguchi, (eds.) Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 63-70.
21. [21] P.E. Jones, Effects of Conventional Machining on High Cycle Fatigue Behavior of the Intermetallic Alloy Ti-47Al-2Nb-2Cr (at.%), Ph.D. dissertation, University of Dayton, Dayton, Ohio 1997, pp. 52-54.
22. [22] M.C. Hardy, Elevated temperature low cycle fatigue behaviour of a near-γ titanium aluminide, in: P.A. Blenkinsop, W.J. Evans, H.M. Flower (eds.), Titanium '95 Science and Technology, vol. I, The Institute of Materials, London, UK, 1996, pp. 256-263.
23. [23] S.J. Trail, Fatigue of Gamma Based Titanium Aluminide Alloys, Ph.D. Dissertation, University of Birmingham, Birmingham, UK, June 1996.
24. [24] G.E. Dieter, Mechanical Metallurgy, 2nd Ed., McGraw-Hill, New York, 1976, pp. 428-429, 441-442.
25. [25] P. Bowen, N.J. Rogers, A.W. James, Fracture and Fatigue of Cast Gamma TiAl Based Aluminides, in: Y.-W. Kim, R. Wagner, M. Yamaguchi (eds.), Gamma Titanium Aluminides, TMS, Warrendale, PA, 1995, pp. 849-865.
26. [26] J.M. Larsen, B.D. Worth, S.J. Balsone, A.H. Rosenberger, Reliability issues affecting the implementation of gamma titanium aluminides in turbine engine applications, in: P.A. Blenkinsop, W.J. Evans, H.M. Flower (eds.) Titanium '95, vol. 1, The Institute of Materials, London, UK, 1996, pp. 113-120.
27. [27] L. Wagner, J.K. Gregory, Thermomechanical Surface Treatment of Titanium Alloys, GKSS Report 94/E/34, GKSS-Forschungszentrum Geesthacht GmbH, Geesthacht, Germany, 1994, pp. 7-10 and 18-21.