Velocity measurements and local heat transfer in a rotating ribbed two-pass square channel with uneven wall heat flux

Proceedings of the ASME Turbo Expo

Volumn 3, Issue , 1997, Pages

  Hsieh, Shou Shing ^a   Chiang, Ming Hung ^b   Chen, Ping Ju ^b  

^a Mechanical Engineering   (United States)

^b Department of Mechanical Engineering ^*  (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AIRCRAFT ENGINES; GAS TURBINES; HEAT TRANSFER; REYNOLDS NUMBER; VELOCITY DISTRIBUTION;

CENTRIFUGAL BUOYANCY; LEADING SURFACE; LOCAL HEAT TRANSFER; LOCAL HEAT TRANSFER COEFFICIENT; MEAN VELOCITIES; ROTATION NUMBER; ROTATIONAL SPEED; TWO-PASS CHANNEL;

HEAT FLUX;

EID: 84973615671     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/97-GT-160     Document Type: Conference Paper

References (27)

1. Clifford, It J., Morris, W. D. and Harasgama, S. P., 1384, "An Experimental Study of Local and Mean Heat Transfer in a Triangular-Sectioned Duct Rotating the Orthogonal Mode," ASME Journal of Engineering for Gas Turbines and Power, Vol. 106, pp. 661-667.
2. Guidez, J., 1989, "Study of the Convective Heat Transfer in Rotating Coolant Channel," ASME Journal of Turbomachiney, Vol. 111, pp. 43-50.
3. Han, J. C., and Zhang, Y. M., 1992, "Effect of Uneven Wall Temperature on Local Heat Transfer in a Rotating Square Channel with Smooth Walls and Radial Outward Flow," ASME Journal of Heat Transfer, VoL 114, pp. 850-858.
4. Han, J. C., Zhang, Y. M. and ICalkuehler K., 1993, "Uneven Wall Temperature Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With Smooth Walls," ASME Journal of Heat Transfer, VoL 115, pp. 912-920.
5. Hart, J. E, 1971, "Instability and Secondary Motion in a Rotating Channel Flow," J. Fluid Mech., Vol. 45, Part 2, pp. 341-351.
6. Hsieh, S.-S., and Hong, Y. J., 1995, "Heat Transfer Coefficents in an Orthogonally Rotating Duct With Turbulators," ASME Journal of Heat Transfer, Vol. 117, pp. 69-78.
7. Hsieh, S.-S., and Liu, W.-J., 1996, "Uneven Wall Heat Flux Effect on Local Heat Transfer in Rotating Two-Pass Channels With Two Oppositely Ribbed Walls," ASME Journal of Heat Transfer, vol. 118, pp. 864-876.
8. Hsieh, S.-S, Y.-S. Wang, and Chiang, M,-H.,1997, "Local Heat Transfer and velocity Measurements in a Rotating Ribbed Two-Pass Square Channel with Uneven Wall Temperatures," (submitted to ASME Journal of Heat Transfer for publication).
9. Islcakov, K. M. and Trushin, V. A., 1983, "Influence of Rotation on Heat Transfer in Turbine-Blade Radial Slot Channel," lzvestiya VUZ. Aviatsionnaya Tekhnika, Vol. 26, No. 1, pp. 97-99.
10. Johnson, B. V., 1978, "Heat Transfer Experiments in Rotating Radial Passages With Supercritical Water," ASME Heat Transfer(bound proceedings from 1978 ASME Winter Annual Meeting).
11. Johnson, B. V., Wagner, J. H., Steuber, G. D., and Yeh, F. C., 1994, " Heat Transfer in Rotating Serpentine Passages With Trips Skewed to the Flow," ASME Journal of Turbomachinery, Vol. 116, pp. 112-123; NASA TM 105581.
12. Johnston, J. P., Halleen, R. M., and Lezius, D. K., 1972,"Effects of Spanwise Rotation on the Structure of Two-Dimensional Fully Developed Turbulent Channel Flow," J. Fluid Mech., VoL 56, Part 3, pp. 533-557.
13. Lokai, V. I. And Gunchenko,E I., 1979, Heat Transfer Over the Initial Section of Turbine Blade Cooling Channels Under Conditions of Rotation," Therm. Enging.. Vol. 26. pp. 92-95.
14. Moore ,J. 1967" Effects of Coriolis on Turbulent Flow in Rotating Rectangular Channels," MIT Gas Turbine Laboratory Report No. 89.
15. Mori, Y., Fukada, 'F. and Nakayama, W., 1971, "Convective Heat Transfer in a Rotating Radial Circular Pipe (2nd Report)," Int. J. of Heat Mass Transfer,Vol. 14, pp.1807- 1824.
16. Morris, W. D., and Ayhan, T., 1979, "Observations on the Influence of Rotation on Heat Transfer in the Coolant Channels of Gas Turbine Rotor Blades," Proc. Inst. Mech. Engrs., VoL 193, pp. 303-311.
17. Morris, W. D., and Ayhan, T., 1982, "An Experimental Study of Turbulent Heat Transfer in a Tube Which Rotates About an Orthogonal Axis," Proc. XIV ICHMT Symposium on Heat and Mass Transfer in Rotating Machinery, Dubrovnik, Yugoslavia, Aug. 30-Sept. 3.
18. Parsons, J. A., Han, J. C., and Zhang, Y. M., 1994, "Wall Heating Effect on Local Heat Transfer in a Rotating Two- Pass Square Channel with 90 Rib Turbulators," Int. J. Heat Mass Transfer, Vol. 37, pp. 1411-1420.
19. Parsons, J. A., Han, J. C., and Zhang, Y. M., 1995, "Effect of Model Orientation and Wall Heating Condition on Local Heat Transfer in a Rotating Two-Pass Square Channel with Rib Turbulators," Int. J. of Heat Mass Transfer, Vol. 38, pp. 1151-1159.
20. Prakash, C., and Zerkle, FL, 1992, "Prediction of Turbulent Flow and Heat Transfer in a Radially Rotating Square Duct," ASME Journal of Turbomachinery, Vol. 114, pp. 835-846.
21. Rothe, P. H., and Johnston, J. P., 1979, "Free Shear Layer Behavior in Rotating Systems," ASME Journal of Fluids Engineering, Vol. 101, pp. 117-120.
22. Wagner, J. H., Johnson, B. V., and Hajek, T. J., 1991a, "Heat Transfer in Rotating Passages With Smooth Walls and Radial Outward Row," ASME Journal of Turbomachinery, Vol. 113, pp. 42-51.
23. Wagner, J. H., Johnson, B. V., and Kopper, F. C., 1991b, "Heat Transfer in Rotating Serpentine Passages With Smooth Walls," ASME Journal of Turbomachinery, Vol. 113, pp. 321-330.
24. Wagner, J. H., Johnson, B. V. ,Graziani, It A.,and Yeh, F. C., 1992, "Heat Transfer in Rotating Serpentine Passages with Trips Normal to the Flow," ASME Journal of Turbomachinery, VoL 114, pp. 847-857.
25. Wagner, It E., and Velkoff, H. FL, 1972, "Measurements of Secondary Rows in a Rotating Duct," ASME J. Eng.Power, Vol. 94, pp. 261-270.
26. Yang, W. J.,Zhang, N., and Chiou, J., 1992, "Local Heat Transfer in a Rotating Serpentine Flow Passage," ASME Journal of Heat Transfer, Vol.114, pp. 354-361.
27. Zhang, Y. Ni, Han, J. C., Parsons, J. A., and Lee, C. P.,1995, "Surface Heating Effect on Local Heat Transfer in a Rotating Two-Pass Square Channel With 60 deg Rib Turbulators," ASME Journal of Turbomechinery, Vol. 117, pp. 272-280.