Comparative Analysis on Resonance Compensation in HDD Dual-Stage Actuation Systems

IEEE Transactions on Industrial Electronics

Volumn 50, Issue 6, 2003, Pages 1179-1186

  Wu, Daowei ^a   Guo, Guoxiao ^a   Chong, Tow C ^a  

^a DATA STORAGE INSTITUTE   (Singapore)

Author keywords

Dual stage actuation system; Milli microactuator; Resonance compensation

Indexed keywords

ALGORITHMS; BANDWIDTH; DAMPING; DIGITAL SIGNAL PROCESSING; ELECTRIC MOTORS; ELECTRIC POTENTIAL; ESTIMATION; HARD DISK STORAGE; MATHEMATICAL MODELS; NATURAL FREQUENCIES; PIEZOELECTRIC DEVICES; RESONANCE; ROBUSTNESS (CONTROL SYSTEMS);

DUAL-STAGE ACTUATION SYSTEMS; HARD DISK DRIVES (HDD); RESONANCE COMPENSATION;

MICROACTUATORS;

EID: 0346686160     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2003.819658     Document Type: Article

References (28)

1. T. Yamaguchi, K. Usui, A. Okuyama, K. Yasuna, K. Akagi, and K. Shishida, "Servo bandwidth and positioning accuracy design for high track density disk drives," IEEE Trans. Magn., vol. 36, pp. 2216-2218, Sept. 2000.
2. D. Speliotis, "Magnetic recording: The next 100 years," Data Storage, vol. 6, no. 1, pp. 1-6, Jan. 1999.
3. D. Harper, R. de Callafon, R. Skelton, and F. Talke, "Piezoelectric stack-based microactuator for hard disk drives," J. Inform. Storage Process. Syst., vol. 1, no. 2, pp. 329-332, 1999.
4. Y. Niu, W. Guo, G. Quo, E. Ong, and T. Huang, "Piezoelectrically actuated suspension for hard disk drives," J. Inform. Storage Process, Syst., vol. 1, no. 4, pp. 667-673, 1999.
5. S. Koganezawa, Y. Uematsu, T. Yamada, H. Nakano, J. Inoue, and T. Suzuki, "Dual-stage actuator system for magnetic disk drives using a shear mode piezoelectric microactuator," IEEE Trans. Magn., vol. 35, pp. 988-992, Mar. 1999.
6. R. Evans, J. Griesbach, and W. Messner, "Piezoelectric microactuator for dual-stage control," IEEE Trans. Magn., vol. 35, pp. 977-982, Mar. 1999.
7. S. Arya, Y. Lee, W. Lu, M. Staudenmann, and M. Hatchett, "Piezo-based milliactuator on a partially etched suspension," IEEE Trans. Magn., vol. 37, pp. 934-939, Mar. 2001.
8. Y. Soeno, S. Ichikawa, T. Tsuna, Y. Sato, and I. Sato, "Piezoelectric piggy-back microactuator for hard disk drive," IEEE Trans. Magn., vol. 35, pp. 983-987, Mar. 1999.
9. T. Hirano, L. Fan, W. Lee, J. Hong, W. Imaino, S. Pattanaik, S. Chan, P. Webb, R. Horowitz, S. Aggarwal, and D. Horsley, "High-bandwidth high-accuracy rotary microactuator for magnetic hard disk drive tracking servos," IEEE/ASME Trans. Mechatron., vol. 3, pp. 156-165, Sept. 1998.
10. G. Guo, Q. Hao, and T. Low, "A dual-stage control design for high track per inch hard disk drives," IEEE Trans. Magn., vol. 37, pp. 860-865, Mar. 2001.
11. D. Hernandez, S. Park, R. Horowitz, and A. Packard, "Dual-stage track-following servo design for hard disk drives," in Proc. American Control Conf., June 1999, pp. 4116-4121.
12. Y. Li and R. Horowitz. "Track-following controller design of MEMS based dual-stage servos in magnetic hard disk drives," in Proc. IEEE Int. Conf. Robotics and Automation, 2000, pp. 953-958.
13. S. Lee, S. Baek, and Y. Kim, "Design of a dual-stage actuator control system with discrete-time sliding mode for hard disk drives," in Proc. 39th IEEE Conf. Decision and Control, 2000, pp. 3120-3125.
14. M. Sasaki, T. Suzuki, E. Ida, F. Fujisawa, M. Kobayashi, and H. Hirai, "Track-following control of a dual-stage hard disk drive using a neuro-control system," Eng. Applicat. Artif. Intell., vol. 11, no. 6, pp. 707-716, Dec. 1998.
15. L. Guo, D. Martin, and D. Brunnett, "Dual-stage actuator servo control for high density disk drives," in Proc. 1999 IEEE/ASME Int. Conf. Advanced Intelligent Mechatronics, Sept. 1999, pp. 132-137.
16. J. Zhang, R. Chen, G. Guo, and T. Low, "RRO compensation for dual stage servo system," IEEE Trans. Magn., vol. 36, pp. 3581-3584, Sept. 2000.
17. F. Huang, T. Semba, W. Imaino, and F. Lee, "Active damping in HDD actuator," IEEE Trans. Magn., vol. 37, pp. 847-849, Mar. 2001.
18. P. Weaver and R. Ehrlich, "The use of multirate notch filters in embedded-servo disk drives," in Proc. American Control Conf., June 1995, pp. 4156-4160.
19. D. Magee, "Optimal filtering to improve performance in hard disk drives: Simulation results," in Proc. American Control Conf., June 1999, pp. 71-75.
20. R. Middleton and S. Graebe, "Slow stable open-loop poles: To cancel or not to cancel," Automatica, vol. 35, no. 5, pp. 877-886, May 1999.
21. D. Wu, G. Guo, and T. C. Chong, "Adaptive microactuator resonance compensation for hard disk drives," IEEE Trans. Magn., vol. 36, pp. 2247-2250, Sept. 2000.
22. M. Tomizuka, "Zero phase error tracking algorithm for digital control," Trans. ASME, J. Dyn. Syst. Meas. Control, vol. 109, no. 1, pp. 65-68, Mar. 1987.
23. G. Franklin, J. Powell, and M. Workman, Digital Control of Dynamic Systems. Reading, MA: Addsion-Wesley, 1990.
24. M. Sri-Jayantha, A. Sharma, H. Dang, and H. Suzuki, "Repeatable runout free servo architecture in direct access storage device," U.S. Patent 6 097 565, Aug. 2000.
25. Y. Tsypkin, J. Mason, and K. Warwick, "Identification of linear systems in the presence of piecewise polynomial disturbances," Proc. IEE - Control Theory Applicat., vol. 143, no. 4, pp. 305-308, July 1996.
26. R. Oboe, A. Beghi, and B. Murari, "Modeling and control of a dual stage actuator hard disk drive with piezoelectric secondary actuator," in Proc. 1999 IEEE/ASME Int. Conf. Advanced Intelligent Mechatronics, Sept. 1999, pp. 138-143.
27. N. Yoshikawa, S. Takekado, and T. Yamada, "Head driving device and method for driving the same for reducing error due to actuator structure vibration," U.S. Patent 6034 834, Mar. 2000.
28. S. Schroeck and W. Messner, "On controller design for linear time-invariant dual-input single-output systems," in Proc. American Control Conf., June 1999, pp. 4122-4126.